linux-stable.git/drivers/net, branch v3.10.30

iwlwifi: pcie: fix interrupt coalescing for 7260 / 3160

2014-02-06T19:08:17+00:00

commit 6960a059b2c618f32fe549f13287b3d2278c09e9 upstream.

We changed the timeout for the interrupt coealescing for
calibration, but that wasn't effective since we changed
that value back before loading the firmware. Since
calibrations are notification from firmware and not Rx
packets, this doesn't change anyway - the firmware will
fire an interrupt straight away regardless of the interrupt
coalescing value.
Also, a HW issue has been discovered in 7000 devices series.
The work around is to disable the new interrupt coalescing
timeout feature - do this by setting bit 31 in
CSR_INT_COALESCING.
This has been fixed in 7265 which means that we can't rely
on the device family and must have a hint in the iwl_cfg
structure.

Fixes: 99cd47142399 ("iwlwifi: add 7000 series device configuration")
Reviewed-by: Johannes Berg 
Signed-off-by: Emmanuel Grumbach 
Signed-off-by: Greg Kroah-Hartman

iwlwifi: pcie: enable oscillator for L1 exit

2014-02-06T19:08:17+00:00

commit 2d93aee152b1758a94a18fe15d72153ba73b5679 upstream.

Enabling the oscillator consumes slightly more power (100uA)
but allows to make sure that we exit from L1 on time.

Not doing so might lead to a PCIe specification violation
since we might wake up from L1 at the wrong time.
This issue has been identified on 3160 and 7260 only.
On older NICs L1 off is not enabled, on newer NICs (7265),
the issue is fixed.

When the bug occurs the user sees that the NIC has
disappeared from the PCI bridge, any access to the device
returns 0xff.

This fixes:
	https://bugzilla.kernel.org/show_bug.cgi?id=64541

and has been extensively discussed here:
	http://markmail.org/thread/mfmpzqt3r333n4bo

Fixes: 99cd47142399 ("iwlwifi: add 7000 series device configuration")
Reported-and-tested-by: wzyboy 
Reviewed-by: Johannes Berg 
Signed-off-by: Emmanuel Grumbach 
Signed-off-by: Greg Kroah-Hartman

xen-netfront: fix resource leak in netfront

2014-02-06T19:08:17+00:00

[ Upstream commit cefe0078eea52af17411eb1248946a94afb84ca5 ]

This patch removes grant transfer releasing code from netfront, and uses
gnttab_end_foreign_access to end grant access since
gnttab_end_foreign_access_ref may fail when the grant entry is
currently used for reading or writing.

* clean up grant transfer code kept from old netfront(2.6.18) which grants
pages for access/map and transfer. But grant transfer is deprecated in current
netfront, so remove corresponding release code for transfer.

* fix resource leak, release grant access (through gnttab_end_foreign_access)
and skb for tx/rx path, use get_page to ensure page is released when grant
access is completed successfully.

Xen-blkfront/xen-tpmfront/xen-pcifront also have similar issue, but patches
for them will be created separately.

V6: Correct subject line and commit message.

V5: Remove unecessary change in xennet_end_access.

V4: Revert put_page in gnttab_end_foreign_access, and keep netfront change in
single patch.

V3: Changes as suggestion from David Vrabel, ensure pages are not freed untill
grant acess is ended.

V2: Improve patch comments.

Signed-off-by: Annie Li 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net,via-rhine: Fix tx_timeout handling

2014-02-06T19:08:16+00:00

[ Upstream commit a926592f5e4e900f3fa903298c4619a131e60963 ]

rhine_reset_task() misses to disable the tx scheduler upon reset,
this can lead to a crash if work is still scheduled while we're resetting
the tx queue.

Fixes:
[   93.591707] BUG: unable to handle kernel NULL pointer dereference at 0000004c
[   93.595514] IP: [] rhine_napipoll+0x491/0x6

Signed-off-by: Richard Weinberger 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

bnx2x: fix DMA unmapping of TSO split BDs

2014-02-06T19:08:16+00:00

[ Upstream commit 95e92fd40c967c363ad66b2fd1ce4dcd68132e54 ]

bnx2x triggers warnings with CONFIG_DMA_API_DEBUG=y:

  WARNING: CPU: 0 PID: 2253 at lib/dma-debug.c:887 check_unmap+0xf8/0x920()
  bnx2x 0000:28:00.0: DMA-API: device driver frees DMA memory with
  different size [device address=0x00000000da2b389e] [map size=1490 bytes]
  [unmap size=66 bytes]

The reason is that bnx2x splits a TSO BD into two BDs (headers + data)
using one DMA mapping for both, but it uses only the length of the first
BD when unmapping.

This patch fixes the bug by unmapping the whole length of the two BDs.

Signed-off-by: Michal Schmidt 
Reviewed-by: Eric Dumazet 
Acked-by: Dmitry Kravkov 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

b43: fix the wrong assignment of status.freq in b43_rx()

2014-02-06T19:08:14+00:00

commit 64e5acb09ca6b50c97299cff9ef51299470b29f2 upstream.

Use the right function to update frequency value.

If rx skb is probe response or beacon, the wrong frequency value can
cause problem that bss info can't be updated when it should be.

Fixes: 8318d78a44d4 ("cfg80211 API for channels/bitrates, mac80211 and driver conversion")
Signed-off-by: ZHAO Gang 
Acked-by: Larry Finger 
Signed-off-by: John W. Linville 
Signed-off-by: Greg Kroah-Hartman

b43legacy: Fix unload oops if firmware is not available

2014-02-06T19:08:14+00:00

commit 452028665312672c6ba9e16a19248ee00ead9400 upstream.

The asyncronous firmware load uses a completion struct to hold firmware
processing until the user-space routines are up and running. There is.
however, a problem in that the waiter is nevered canceled during teardown.
As a result, unloading the driver when firmware is not available causes an oops.

Signed-off-by: Larry Finger 
Signed-off-by: John W. Linville 
Signed-off-by: Greg Kroah-Hartman

b43: Fix unload oops if firmware is not available

2014-02-06T19:08:14+00:00

commit 0673effd41dba323d6a280ef37b5ef29f3f5a653 upstream.

The asyncronous firmware load uses a completion struct to hold firmware
processing until the user-space routines are up and running. There is.
however, a problem in that the waiter is nevered canceled during teardown.
As a result, unloading the driver when firmware is not available causes an oops.

To be able to access the completion structure at teardown, it had to be moved
into the b43_wldev structure.

This patch also fixes a typo in a comment.

Signed-off-by: Larry Finger 
Signed-off-by: John W. Linville 
Signed-off-by: Greg Kroah-Hartman

b43: Fix lockdep splat

2014-02-06T19:08:14+00:00

commit 09164043f63c947a49797750a09ca1cd7c31108e upstream.

In https://bugzilla.kernel.org/show_bug.cgi?id=67561, a locking dependency is reported
when b43 is used with hostapd, and rfkill is used to kill the radio output.

The lockdep splat (in part) is as follows:

======================================================
[ INFO: possible circular locking dependency detected ]
3.12.0 #1 Not tainted
-------------------------------------------------------
rfkill/10040 is trying to acquire lock:
 (rtnl_mutex){+.+.+.}, at: [] rtnl_lock+0x12/0x20

but task is already holding lock:
 (rfkill_global_mutex){+.+.+.}, at: [] rfkill_fop_write+0x6a/0x170 [rfkill]

--snip--

Chain exists of:
  rtnl_mutex --> misc_mtx --> rfkill_global_mutex

The fix is to move the initialization of the hardware random number generator
outside the code range covered by the rtnl_mutex.

Reported-by: yury 
Tested-by: yury 
Signed-off-by: Larry Finger 
Signed-off-by: John W. Linville 
Signed-off-by: Greg Kroah-Hartman

iwlwifi: mvm: fix missing cleanup in .start() error path

2014-02-06T19:08:14+00:00

commit 91b0d1198417cf4fd9a7bd4138b6909f0b359099 upstream.

Cleanup of iwl_mvm_leds was missing in case of error,
resulting in the following warning:

WARNING: at lib/kobject.c:196 kobject_add_internal+0x1f4/0x210()
kobject_add_internal failed for phy0-led with -EEXIST, don't try to register things with the same name in the same directory.

which prevents further reloads of the driver.

Signed-off-by: Eliad Peller 
Signed-off-by: Emmanuel Grumbach 
Signed-off-by: Greg Kroah-Hartman