linux-stable.git/drivers/net, branch linux-4.11.y

brcmfmac: Fix glom_skb leak in brcmf_sdiod_recv_chain

2017-07-21T05:00:09+00:00

commit 5ea59db8a375216e6c915c5586f556766673b5a7 upstream.

An earlier change to this function (3bdae810721b) fixed a leak in the
case of an unsuccessful call to brcmf_sdiod_buffrw(). However, the
glom_skb buffer, used for emulating a scattering read, is never used
or referenced after its contents are copied into the destination
buffers, and therefore always needs to be freed by the end of the
function.

Fixes: 3bdae810721b ("brcmfmac: Fix glob_skb leak in brcmf_sdiod_recv_chain")
Fixes: a413e39a38573 ("brcmfmac: fix brcmf_sdcard_recv_chain() for host without sg support")
Signed-off-by: Peter S. Housel 
Signed-off-by: Arend van Spriel 
Signed-off-by: Kalle Valo 
Signed-off-by: Greg Kroah-Hartman

brcmfmac: Fix a memory leak in error handling path in 'brcmf_cfg80211_attach'

2017-07-21T05:00:09+00:00

commit 57c00f2fac512837f8de73474ec1f54020015bae upstream.

If 'wiphy_new()' fails, we leak 'ops'. Add a new label in the error
handling path to free it in such a case.

Fixes: 5c22fb85102a7 ("brcmfmac: add wowl gtk rekeying offload support")
Signed-off-by: Christophe JAILLET 
Signed-off-by: Kalle Valo 
Signed-off-by: Greg Kroah-Hartman

sfc: don't read beyond unicast address list

2017-07-21T05:00:08+00:00

[ Upstream commit c70d68150f71b84cea6997a53493e17bf18a54db ]

If we have more than 32 unicast MAC addresses assigned to an interface
we will read beyond the end of the address table in the driver when
adding filters. The next 256 entries store multicast addresses, so we
will end up attempting to insert duplicate filters, which is mostly
harmless. If we add more than 288 unicast addresses we will then read
past the multicast address table, which is likely to be more exciting.

Fixes: 12fb0da45c9a ("sfc: clean fallbacks between promisc/normal in efx_ef10_filter_sync_rx_mode")
Signed-off-by: Bert Kenward 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

brcmfmac: fix possible buffer overflow in brcmf_cfg80211_mgmt_tx()

2017-07-21T05:00:08+00:00

[ Upstream commit 8f44c9a41386729fea410e688959ddaa9d51be7c ]

The lower level nl80211 code in cfg80211 ensures that "len" is between
25 and NL80211_ATTR_FRAME (2304).  We subtract DOT11_MGMT_HDR_LEN (24) from
"len" so thats's max of 2280.  However, the action_frame->data[] buffer is
only BRCMF_FIL_ACTION_FRAME_SIZE (1800) bytes long so this memcpy() can
overflow.

	memcpy(action_frame->data, &buf[DOT11_MGMT_HDR_LEN],
	       le16_to_cpu(action_frame->len));

Cc: stable@vger.kernel.org # 3.9.x
Fixes: 18e2f61db3b70 ("brcmfmac: P2P action frame tx.")
Reported-by: "freenerguo(郭大兴)" 
Signed-off-by: Arend van Spriel 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

tap: convert a mutex to a spinlock

2017-07-21T05:00:08+00:00

[ Upstream commit ffa423fb3251f8737303ffc3b0659e86e501808e ]

We are not allowed to block on the RCU reader side, so can't
just hold the mutex as before. As a quick fix, convert it to
a spinlock.

Fixes: d9f1f61c0801 ("tap: Extending tap device create/destroy APIs")
Reported-by: Christian Borntraeger 
Tested-by: Christian Borntraeger 
Cc: Sainath Grandhi 
Signed-off-by: Cong Wang 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

cxgb4: fix BUG() on interrupt deallocating path of ULD

2017-07-21T05:00:08+00:00

[ Upstream commit 6a146f3a5894b751cef16feb3d7903e45e3c445c ]

Since the introduction of ULD (Upper-Layer Drivers), the MSI-X
deallocating path changed in cxgb4: the driver frees the interrupts
of ULD when unregistering it or on shutdown PCI handler.

Problem is that if a MSI-X is not freed before deallocated in the PCI
layer, it will trigger a BUG() due to still "alive" interrupt being
tentatively quiesced.

The below trace was observed when doing a simple unbind of Chelsio's
adapter PCI function, like:
  "echo 001e:80:00.4 > /sys/bus/pci/drivers/cxgb4/unbind"

Trace:

  kernel BUG at drivers/pci/msi.c:352!
  Oops: Exception in kernel mode, sig: 5 [#1]
  ...
  NIP [c0000000005a5e60] free_msi_irqs+0xa0/0x250
  LR [c0000000005a5e50] free_msi_irqs+0x90/0x250
  Call Trace:
  [c0000000005a5e50] free_msi_irqs+0x90/0x250 (unreliable)
  [c0000000005a72c4] pci_disable_msix+0x124/0x180
  [d000000011e06708] disable_msi+0x88/0xb0 [cxgb4]
  [d000000011e06948] free_some_resources+0xa8/0x160 [cxgb4]
  [d000000011e06d60] remove_one+0x170/0x3c0 [cxgb4]
  [c00000000058a910] pci_device_remove+0x70/0x110
  [c00000000064ef04] device_release_driver_internal+0x1f4/0x2c0
  ...

This patch fixes the issue by refactoring the shutdown path of ULD on
cxgb4 driver, by properly freeing and disabling interrupts on PCI
remove handler too.

Fixes: 0fbc81b3ad51 ("Allocate resources dynamically for all cxgb4 ULD's")
Reported-by: Harsha Thyagaraja 
Signed-off-by: Guilherme G. Piccoli 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net/mlx5e: Initialize CEE's getpermhwaddr address buffer to 0xff

2017-07-21T05:00:08+00:00

[ Upstream commit d968f0f2e4404152f37ed2384b4a2269dd2dae5a ]

Latest change in open-lldp code uses bytes 6-11 of perm_addr buffer
as the Ethernet source address for the host TLV packet.
Since our driver does not fill these bytes, they stay at zero and
the open-lldp code ends up sending the TLV packet with zero source
address and the switch drops this packet.

The fix is to initialize these bytes to 0xff. The open-lldp code
considers 0xff:ff:ff:ff:ff:ff as the invalid address and falls back to
use the host's mac address as the Ethernet source address.

Fixes: 3a6a931dfb8e ("net/mlx5e: Support DCBX CEE API")
Signed-off-by: Huy Nguyen 
Reviewed-by: Daniel Jurgens 
Signed-off-by: Saeed Mahameed 
Signed-off-by: Greg Kroah-Hartman

vrf: fix bug_on triggered by rx when destroying a vrf

2017-07-21T05:00:08+00:00

[ Upstream commit f630c38ef0d785101363a8992bbd4f302180f86f ]

When destroying a VRF device we cleanup the slaves in its ndo_uninit()
function, but that causes packets to be switched (skb->dev == vrf being
destroyed) even though we're pass the point where the VRF should be
receiving any packets while it is being dismantled. This causes a BUG_ON
to trigger if we have raw sockets (trace below).
The reason is that the inetdev of the VRF has been destroyed but we're
still sending packets up the stack with it, so let's free the slaves in
the dellink callback as David Ahern suggested.

Note that this fix doesn't prevent packets from going up when the VRF
device is admin down.

[   35.631371] ------------[ cut here ]------------
[   35.631603] kernel BUG at net/ipv4/fib_frontend.c:285!
[   35.631854] invalid opcode: 0000 [#1] SMP
[   35.631977] Modules linked in:
[   35.632081] CPU: 2 PID: 22 Comm: ksoftirqd/2 Not tainted 4.12.0-rc7+ #45
[   35.632247] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014
[   35.632477] task: ffff88005ad68000 task.stack: ffff88005ad64000
[   35.632632] RIP: 0010:fib_compute_spec_dst+0xfc/0x1ee
[   35.632769] RSP: 0018:ffff88005ad67978 EFLAGS: 00010202
[   35.632910] RAX: 0000000000000001 RBX: ffff880059a7f200 RCX: 0000000000000000
[   35.633084] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffffff82274af0
[   35.633256] RBP: ffff88005ad679f8 R08: 000000000001ef70 R09: 0000000000000046
[   35.633430] R10: ffff88005ad679f8 R11: ffff880037731cb0 R12: 0000000000000001
[   35.633603] R13: ffff8800599e3000 R14: 0000000000000000 R15: ffff8800599cb852
[   35.634114] FS:  0000000000000000(0000) GS:ffff88005d900000(0000) knlGS:0000000000000000
[   35.634306] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   35.634456] CR2: 00007f3563227095 CR3: 000000000201d000 CR4: 00000000000406e0
[   35.634632] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   35.634865] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   35.635055] Call Trace:
[   35.635271]  ? __lock_acquire+0xf0d/0x1117
[   35.635522]  ipv4_pktinfo_prepare+0x82/0x151
[   35.635831]  raw_rcv_skb+0x17/0x3c
[   35.636062]  raw_rcv+0xe5/0xf7
[   35.636287]  raw_local_deliver+0x169/0x1d9
[   35.636534]  ip_local_deliver_finish+0x87/0x1c4
[   35.636820]  ip_local_deliver+0x63/0x7f
[   35.637058]  ip_rcv_finish+0x340/0x3a1
[   35.637295]  ip_rcv+0x314/0x34a
[   35.637525]  __netif_receive_skb_core+0x49f/0x7c5
[   35.637780]  ? lock_acquire+0x13f/0x1d7
[   35.638018]  ? lock_acquire+0x15e/0x1d7
[   35.638259]  __netif_receive_skb+0x1e/0x94
[   35.638502]  ? __netif_receive_skb+0x1e/0x94
[   35.638748]  netif_receive_skb_internal+0x74/0x300
[   35.639002]  ? dev_gro_receive+0x2ed/0x411
[   35.639246]  ? lock_is_held_type+0xc4/0xd2
[   35.639491]  napi_gro_receive+0x105/0x1a0
[   35.639736]  receive_buf+0xc32/0xc74
[   35.639965]  ? detach_buf+0x67/0x153
[   35.640201]  ? virtqueue_get_buf_ctx+0x120/0x176
[   35.640453]  virtnet_poll+0x128/0x1c5
[   35.640690]  net_rx_action+0x103/0x343
[   35.640932]  __do_softirq+0x1c7/0x4b7
[   35.641171]  run_ksoftirqd+0x23/0x5c
[   35.641403]  smpboot_thread_fn+0x24f/0x26d
[   35.641646]  ? sort_range+0x22/0x22
[   35.641878]  kthread+0x129/0x131
[   35.642104]  ? __list_add+0x31/0x31
[   35.642335]  ? __list_add+0x31/0x31
[   35.642568]  ret_from_fork+0x2a/0x40
[   35.642804] Code: 05 bd 87 a3 00 01 e8 1f ef 98 ff 4d 85 f6 48 c7 c7 f0 4a 27 82 41 0f 94 c4 31 c9 31 d2 41 0f b6 f4 e8 04 71 a1 ff 45 84 e4 74 02 <0f> 0b 0f b7 93 c4 00 00 00 4d 8b a5 80 05 00 00 48 03 93 d0 00
[   35.644342] RIP: fib_compute_spec_dst+0xfc/0x1ee RSP: ffff88005ad67978

Fixes: 193125dbd8eb ("net: Introduce VRF device driver")
Reported-by: Chris Cormier 
Signed-off-by: Nikolay Aleksandrov 
Acked-by: David Ahern 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

liquidio: fix bug in soft reset failure detection

2017-07-21T05:00:07+00:00

[ Upstream commit 05a6b4cae8c0cc1680c9dd33a97a49a13c0f01bc ]

The code that detects a failed soft reset of Octeon is comparing the wrong
value against the reset value of the Octeon SLI_SCRATCH_1 register,
resulting in an inability to detect a soft reset failure.  Fix it by using
the correct value in the comparison, which is any non-zero value.

Fixes: f21fb3ed364b ("Add support of Cavium Liquidio ethernet adapters")
Fixes: c0eab5b3580a ("liquidio: CN23XX firmware download")
Signed-off-by: Derek Chickles 
Signed-off-by: Satanand Burla 
Signed-off-by: Raghu Vatsavayi 
Signed-off-by: Felix Manlunas 
Reviewed-by: Leon Romanovsky 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

geneve: fix hlist corruption

2017-07-21T05:00:07+00:00

[ Upstream commit 4b4c21fad6ae6bd58ff1566f23b0f4f70fdc9a30 ]

It's not a good idea to add the same hlist_node to two different hash lists.
This leads to various hard to debug memory corruptions.

Fixes: 8ed66f0e8235 ("geneve: implement support for IPv6-based tunnels")
Cc: John W. Linville 
Signed-off-by: Jiri Benc 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman