linux-stable.git/drivers/net/wireless, branch v6.1.8 Linux kernel stable tree wifi: brcmfmac: fix regression for Broadcom PCIe wifi devices 2023-01-24T06:24:32+00:00 Arend van Spriel arend.vanspriel@broadcom.com 2023-01-11T11:24:19+00:00 1590cee5342ebdb31c48448736081201daad9828 commit ed05cb177ae5cd7f02f1d6e7706ba627d30f1696 upstream. A sanity check was introduced considering maximum flowrings above 256 as insane and effectively aborting the device probe. This resulted in regression for number of users as the value turns out to be sane after all. Fixes: 2aca4f3734bd ("brcmfmac: return error when getting invalid max_flowrings from dongle") Reported-by: chainofflowers <chainofflowers@posteo.net> Link: https://lore.kernel.org/all/4781984.GXAFRqVoOG@luna/ Reported-by: Christian Marillat <marillat@debian.org> Link: https://bugzilla.kernel.org/show_bug.cgi?id=216894 Cc: stable@vger.kernel.org Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230111112419.24185-1-arend.vanspriel@broadcom.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit ed05cb177ae5cd7f02f1d6e7706ba627d30f1696 upstream.

A sanity check was introduced considering maximum flowrings above
256 as insane and effectively aborting the device probe. This
resulted in regression for number of users as the value turns out
to be sane after all.

Fixes: 2aca4f3734bd ("brcmfmac: return error when getting invalid max_flowrings from dongle")
Reported-by: chainofflowers <chainofflowers@posteo.net>
Link: https://lore.kernel.org/all/4781984.GXAFRqVoOG@luna/
Reported-by: Christian Marillat <marillat@debian.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216894
Cc: stable@vger.kernel.org
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230111112419.24185-1-arend.vanspriel@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
wifi: iwlwifi: fw: skip PPAG for JF 2023-01-24T06:24:30+00:00 Johannes Berg johannes.berg@intel.com 2022-12-13T21:15:04+00:00 77043645aa6c5f8b388c2d99b5f3164307acf448 [ Upstream commit 1c4c0b28b517d778d37900deedfe91088839f07a ] For JF RFs we don't support PPAG, but many firmware images lie about it. Always skip support for JF to avoid firmware errors when sending the command. Reported-and-tested-by: Íñigo Huguet <ihuguet@redhat.com> Link: https://lore.kernel.org/linux-wireless/CACT4oufQsqHGp6bah2c4+jPn2wG1oZqY=UKa_TmPx=F6Lxng8Q@mail.gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221213225723.2a43415d8990.I9ac210740a45b41f1b2e15274e1daf4284f2808a@changeid Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 1c4c0b28b517d778d37900deedfe91088839f07a ]

For JF RFs we don't support PPAG, but many firmware
images lie about it. Always skip support for JF to
avoid firmware errors when sending the command.

Reported-and-tested-by: Íñigo Huguet <ihuguet@redhat.com>
Link: https://lore.kernel.org/linux-wireless/CACT4oufQsqHGp6bah2c4+jPn2wG1oZqY=UKa_TmPx=F6Lxng8Q@mail.gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221213225723.2a43415d8990.I9ac210740a45b41f1b2e15274e1daf4284f2808a@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
brcmfmac: Prefer DT board type over DMI board type 2023-01-18T10:58:11+00:00 Ivan T. Ivanov iivanov@suse.de 2023-01-06T13:19:05+00:00 20fa7855af45e533cddab564203921e2a6e981ef commit a5a36720c3f650f859f5e9535dd62d06f13f4f3b upstream. The introduction of support for Apple board types inadvertently changed the precedence order, causing hybrid SMBIOS+DT platforms to look up the firmware using the DMI information instead of the device tree compatible to generate the board type. Revert back to the old behavior, as affected platforms use firmwares named after the DT compatible. Fixes: 7682de8b3351 ("wifi: brcmfmac: of: Fetch Apple properties") [1] https://bugzilla.opensuse.org/show_bug.cgi?id=1206697#c13 Cc: stable@vger.kernel.org Signed-off-by: Ivan T. Ivanov <iivanov@suse.de> Reviewed-by: Hector Martin <marcan@marcan.st> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Tested-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit a5a36720c3f650f859f5e9535dd62d06f13f4f3b upstream.

The introduction of support for Apple board types inadvertently changed
the precedence order, causing hybrid SMBIOS+DT platforms to look up the
firmware using the DMI information instead of the device tree compatible
to generate the board type. Revert back to the old behavior,
as affected platforms use firmwares named after the DT compatible.

Fixes: 7682de8b3351 ("wifi: brcmfmac: of: Fetch Apple properties")

[1] https://bugzilla.opensuse.org/show_bug.cgi?id=1206697#c13

Cc: stable@vger.kernel.org
Signed-off-by: Ivan T. Ivanov <iivanov@suse.de>
Reviewed-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
wifi: ath11k: Send PME message during wakeup from D3cold 2023-01-12T11:02:58+00:00 Baochen Qiang quic_bqiang@quicinc.com 2022-10-10T03:32:37+00:00 177055b94fb5918f32c0f5ec05891dc73e64959c commit 3f9b09ccf7d5f23066b02881a737bee42def9d1a upstream. We are seeing system stuck on some specific platforms due to WLAN chip fails to wakeup from D3cold state. With this flag, firmware will send PME message during wakeup and this issue is gone. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Cc: "Limonciello, Mario" <Mario.Limonciello@amd.com> Link: https://lore.kernel.org/r/20221010033237.415478-1-quic_bqiang@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 3f9b09ccf7d5f23066b02881a737bee42def9d1a upstream.

We are seeing system stuck on some specific platforms due to
WLAN chip fails to wakeup from D3cold state.

With this flag, firmware will send PME message during wakeup
and this issue is gone.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3

Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Cc: "Limonciello, Mario" <Mario.Limonciello@amd.com>
Link: https://lore.kernel.org/r/20221010033237.415478-1-quic_bqiang@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
wifi: ath9k: use proper statements in conditionals 2023-01-12T11:01:57+00:00 Arnd Bergmann arnd@arndb.de 2022-12-15T16:55:42+00:00 35dab092c295b76d94bd5b47ff60a11190e532ce [ Upstream commit b7dc753fe33a707379e2254317794a4dad6c0fe2 ] A previous cleanup patch accidentally broke some conditional expressions by replacing the safe "do {} while (0)" constructs with empty macros. gcc points this out when extra warnings are enabled: drivers/net/wireless/ath/ath9k/hif_usb.c: In function 'ath9k_skb_queue_complete': drivers/net/wireless/ath/ath9k/hif_usb.c:251:57: error: suggest braces around empty body in an 'else' statement [-Werror=empty-body] 251 | TX_STAT_INC(hif_dev, skb_failed); Make both sets of macros proper expressions again. Fixes: d7fc76039b74 ("ath9k: htc: clean up statistics macros") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221215165553.1950307-1-arnd@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit b7dc753fe33a707379e2254317794a4dad6c0fe2 ]

A previous cleanup patch accidentally broke some conditional
expressions by replacing the safe "do {} while (0)" constructs
with empty macros. gcc points this out when extra warnings
are enabled:

drivers/net/wireless/ath/ath9k/hif_usb.c: In function 'ath9k_skb_queue_complete':
drivers/net/wireless/ath/ath9k/hif_usb.c:251:57: error: suggest braces around empty body in an 'else' statement [-Werror=empty-body]
  251 |                         TX_STAT_INC(hif_dev, skb_failed);

Make both sets of macros proper expressions again.

Fixes: d7fc76039b74 ("ath9k: htc: clean up statistics macros")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221215165553.1950307-1-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
wifi: wilc1000: sdio: fix module autoloading 2023-01-07T10:11:51+00:00 Michael Walle michael@walle.cc 2022-10-27T17:12:21+00:00 360ef3bcf73054d9e84a263f7e9e87618cdb5aa0 commit 57d545b5a3d6ce3a8fb6b093f02bfcbb908973f3 upstream. There are no SDIO module aliases included in the driver, therefore, module autoloading isn't working. Add the proper MODULE_DEVICE_TABLE(). Cc: stable@vger.kernel.org Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221027171221.491937-1-michael@walle.cc Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 57d545b5a3d6ce3a8fb6b093f02bfcbb908973f3 upstream.

There are no SDIO module aliases included in the driver, therefore,
module autoloading isn't working. Add the proper MODULE_DEVICE_TABLE().

Cc: stable@vger.kernel.org
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221027171221.491937-1-michael@walle.cc
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
wifi: mt76: do not run mt76u_status_worker if the device is not running 2022-12-31T12:33:04+00:00 Lorenzo Bianconi lorenzo@kernel.org 2022-10-13T19:07:37+00:00 f5ac749a0b21beee55d87d0b05de36976b22dff9 [ Upstream commit bd5dac7ced5a7c9faa4dc468ac9560c3256df845 ] Fix the following NULL pointer dereference avoiding to run mt76u_status_worker thread if the device is not running yet. KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 0 PID: 98 Comm: kworker/u2:2 Not tainted 5.14.0+ #78 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Workqueue: mt76 mt76u_tx_status_data RIP: 0010:mt76x02_mac_fill_tx_status.isra.0+0x82c/0x9e0 Code: c5 48 b8 00 00 00 00 00 fc ff df 80 3c 02 00 0f 85 94 01 00 00 48 b8 00 00 00 00 00 fc ff df 4d 8b 34 24 4c 89 f2 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 89 01 00 00 41 8b 16 41 0f b7 RSP: 0018:ffffc900005af988 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: ffffc900005afae8 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff832fc661 RDI: ffffc900005afc2a RBP: ffffc900005afae0 R08: 0000000000000001 R09: fffff520000b5f3c R10: 0000000000000003 R11: fffff520000b5f3b R12: ffff88810b6132d8 R13: 000000000000ffff R14: 0000000000000000 R15: ffffc900005afc28 FS: 0000000000000000(0000) GS:ffff88811aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa0eda6a000 CR3: 0000000118f17000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: mt76x02_send_tx_status+0x1d2/0xeb0 mt76x02_tx_status_data+0x8e/0xd0 mt76u_tx_status_data+0xe1/0x240 process_one_work+0x92b/0x1460 worker_thread+0x95/0xe00 kthread+0x3a1/0x480 ret_from_fork+0x1f/0x30 Modules linked in: --[ end trace 8df5d20fc5040f65 ]-- RIP: 0010:mt76x02_mac_fill_tx_status.isra.0+0x82c/0x9e0 Code: c5 48 b8 00 00 00 00 00 fc ff df 80 3c 02 00 0f 85 94 01 00 00 48 b8 00 00 00 00 00 fc ff df 4d 8b 34 24 4c 89 f2 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 89 01 00 00 41 8b 16 41 0f b7 RSP: 0018:ffffc900005af988 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: ffffc900005afae8 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff832fc661 RDI: ffffc900005afc2a RBP: ffffc900005afae0 R08: 0000000000000001 R09: fffff520000b5f3c R10: 0000000000000003 R11: fffff520000b5f3b R12: ffff88810b6132d8 R13: 000000000000ffff R14: 0000000000000000 R15: ffffc900005afc28 FS: 0000000000000000(0000) GS:ffff88811aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa0eda6a000 CR3: 0000000118f17000 CR4: 0000000000750ef0 PKRU: 55555554 Moreover move stat_work schedule out of the for loop. Reported-by: Dokyung Song <dokyungs@yonsei.ac.kr> Co-developed-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit bd5dac7ced5a7c9faa4dc468ac9560c3256df845 ]

Fix the following NULL pointer dereference avoiding to run
mt76u_status_worker thread if the device is not running yet.

KASAN: null-ptr-deref in range
[0x0000000000000000-0x0000000000000007]
CPU: 0 PID: 98 Comm: kworker/u2:2 Not tainted 5.14.0+ #78 Hardware
name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Workqueue: mt76 mt76u_tx_status_data
RIP: 0010:mt76x02_mac_fill_tx_status.isra.0+0x82c/0x9e0
Code: c5 48 b8 00 00 00 00 00 fc ff df 80 3c 02 00 0f 85 94 01 00 00
48 b8 00 00 00 00 00 fc ff df 4d 8b 34 24 4c 89 f2 48 c1 ea 03 <0f>
b6
04 02 84 c0 74 08 3c 03 0f 8e 89 01 00 00 41 8b 16 41 0f b7
RSP: 0018:ffffc900005af988 EFLAGS: 00010246
RAX: dffffc0000000000 RBX: ffffc900005afae8 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff832fc661 RDI: ffffc900005afc2a
RBP: ffffc900005afae0 R08: 0000000000000001 R09: fffff520000b5f3c
R10: 0000000000000003 R11: fffff520000b5f3b R12: ffff88810b6132d8
R13: 000000000000ffff R14: 0000000000000000 R15: ffffc900005afc28
FS:  0000000000000000(0000) GS:ffff88811aa00000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fa0eda6a000 CR3: 0000000118f17000 CR4: 0000000000750ef0
PKRU: 55555554
Call Trace:
 mt76x02_send_tx_status+0x1d2/0xeb0
 mt76x02_tx_status_data+0x8e/0xd0
 mt76u_tx_status_data+0xe1/0x240
 process_one_work+0x92b/0x1460
 worker_thread+0x95/0xe00
 kthread+0x3a1/0x480
 ret_from_fork+0x1f/0x30
Modules linked in:
--[ end trace 8df5d20fc5040f65 ]--
RIP: 0010:mt76x02_mac_fill_tx_status.isra.0+0x82c/0x9e0
Code: c5 48 b8 00 00 00 00 00 fc ff df 80 3c 02 00 0f 85 94 01 00 00
48 b8 00 00 00 00 00 fc ff df 4d 8b 34 24 4c 89 f2 48 c1 ea 03 <0f>
b6
04 02 84 c0 74 08 3c 03 0f 8e 89 01 00 00 41 8b 16 41 0f b7
RSP: 0018:ffffc900005af988 EFLAGS: 00010246
RAX: dffffc0000000000 RBX: ffffc900005afae8 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff832fc661 RDI: ffffc900005afc2a
RBP: ffffc900005afae0 R08: 0000000000000001 R09: fffff520000b5f3c
R10: 0000000000000003 R11: fffff520000b5f3b R12: ffff88810b6132d8
R13: 000000000000ffff R14: 0000000000000000 R15: ffffc900005afc28
FS:  0000000000000000(0000) GS:ffff88811aa00000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fa0eda6a000 CR3: 0000000118f17000 CR4: 0000000000750ef0
PKRU: 55555554

Moreover move stat_work schedule out of the for loop.

Reported-by: Dokyung Song <dokyungs@yonsei.ac.kr>
Co-developed-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
wifi: brcmfmac: Fix potential NULL pointer dereference in 'brcmf_c_preinit_dcmds()' 2022-12-31T12:33:00+00:00 Jisoo Jang jisoo.jang@yonsei.ac.kr 2022-11-01T18:36:42+00:00 630ab215956ef47ca559006ba2adf08fd87e01fb [ Upstream commit 683b9728f28895660c66da250cd31654b8fcbc6e ] This patch fixes a NULL pointer dereference bug in brcmfmac that occurs when ptr which is NULL pointer passed as an argument of strlcpy() in brcmf_c_preinit_dcmds(). This happens when the driver passes a firmware version string that does not contain a space " ", making strrchr() return a null pointer. This patch adds a null pointer check. Found by a modified version of syzkaller. KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 0 PID: 1983 Comm: kworker/0:2 Not tainted 5.14.0+ #79 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Workqueue: usb_hub_wq hub_event RIP: 0010:strlen+0x1a/0x90 Code: 23 ff ff ff 66 66 2e 0f 1f 84 00 00 00 00 00 90 48 b8 00 00 00 00 00 fc ff df 48 89 fa 55 48 89 fd 48 c1 ea 03 53 48 83 ec 08 <0f> b6 04 02 48 89 fa 83 e2 07 38 d0 7f 04 84 c0 75 48 80 7d 00 00 RSP: 0018:ffffc90002bfedd8 EFLAGS: 00010296 RAX: dffffc0000000000 RBX: 1ffff9200057fdc1 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000020 RDI: 0000000000000001 RBP: 0000000000000001 R08: 0000000000000039 R09: ffffed1023549801 R10: ffff88811aa4c007 R11: ffffed1023549800 R12: ffff88800bc68d6c R13: ffffc90002bfef08 R14: ffff88800bc6bc7c R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff88811aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020546180 CR3: 0000000117ff1000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: brcmf_c_preinit_dcmds+0x9f2/0xc40 ? brcmf_c_set_joinpref_default+0x100/0x100 ? rcu_read_lock_sched_held+0xa1/0xd0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? lock_acquire+0x19d/0x4e0 ? find_held_lock+0x2d/0x110 ? brcmf_usb_deq+0x1a7/0x260 ? brcmf_usb_rx_fill_all+0x5a/0xf0 brcmf_attach+0x246/0xd40 ? wiphy_new_nm+0x1703/0x1dd0 ? kmemdup+0x43/0x50 brcmf_usb_probe+0x12de/0x1690 ? brcmf_usbdev_qinit.constprop.0+0x470/0x470 usb_probe_interface+0x2aa/0x760 ? usb_probe_device+0x250/0x250 really_probe+0x205/0xb70 ? driver_allows_async_probing+0x130/0x130 __driver_probe_device+0x311/0x4b0 ? driver_allows_async_probing+0x130/0x130 driver_probe_device+0x4e/0x150 __device_attach_driver+0x1cc/0x2a0 bus_for_each_drv+0x156/0x1d0 ? bus_rescan_devices+0x30/0x30 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 ? trace_hardirqs_on+0x46/0x160 __device_attach+0x23f/0x3a0 ? device_bind_driver+0xd0/0xd0 ? kobject_uevent_env+0x287/0x14b0 bus_probe_device+0x1da/0x290 device_add+0xb7b/0x1eb0 ? wait_for_completion+0x290/0x290 ? __fw_devlink_link_to_suppliers+0x5a0/0x5a0 usb_set_configuration+0xf59/0x16f0 usb_generic_driver_probe+0x82/0xa0 usb_probe_device+0xbb/0x250 ? usb_suspend+0x590/0x590 really_probe+0x205/0xb70 ? driver_allows_async_probing+0x130/0x130 __driver_probe_device+0x311/0x4b0 ? usb_generic_driver_match+0x75/0x90 ? driver_allows_async_probing+0x130/0x130 driver_probe_device+0x4e/0x150 __device_attach_driver+0x1cc/0x2a0 bus_for_each_drv+0x156/0x1d0 ? bus_rescan_devices+0x30/0x30 ? _raw_spin_unlock_irqrestore+0x47/0x50 __device_attach+0x23f/0x3a0 ? device_bind_driver+0xd0/0xd0 ? kobject_uevent_env+0x287/0x14b0 bus_probe_device+0x1da/0x290 device_add+0xb7b/0x1eb0 ? __fw_devlink_link_to_suppliers+0x5a0/0x5a0 ? kfree+0x14a/0x6b0 ? __usb_get_extra_descriptor+0x116/0x160 usb_new_device.cold+0x49c/0x1029 ? hub_disconnect+0x450/0x450 ? rwlock_bug.part.0+0x90/0x90 ? _raw_spin_unlock_irq+0x24/0x30 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 hub_event+0x248b/0x31c9 ? usb_port_suspend.cold+0x139/0x139 ? check_irq_usage+0x861/0xf20 ? drain_workqueue+0x280/0x360 ? lock_release+0x640/0x640 ? rcu_read_lock_sched_held+0xa1/0xd0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 process_one_work+0x92b/0x1460 ? pwq_dec_nr_in_flight+0x330/0x330 ? rwlock_bug.part.0+0x90/0x90 worker_thread+0x95/0xe00 ? __kthread_parkme+0x115/0x1e0 ? process_one_work+0x1460/0x1460 kthread+0x3a1/0x480 ? set_kthread_struct+0x120/0x120 ret_from_fork+0x1f/0x30 Modulesdd linked in: ---[ end trace c112c68924ddd800 ]--- RIP: 0010:strlen+0x1a/0x90 Code: 23 ff ff ff 66 66 2e 0f 1f 84 00 00 00 00 00 90 48 b8 00 00 00 00 00 fc ff df 48 89 fa 55 48 89 fd 48 c1 ea 03 53 48 83 ec 08 <0f> b6 04 02 48 89 fa 83 e2 07 38 d0 7f 04 84 c0 75 48 80 7d 00 00 RSP: 0018:ffffc90002bfedd8 EFLAGS: 00010296 RAX: dffffc0000000000 RBX: 1ffff9200057fdc1 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000020 RDI: 0000000000000001 RBP: 0000000000000001 R08: 0000000000000039 R09: ffffed1023549801 R10: ffff88811aa4c007 R11: ffffed1023549800 R12: ffff88800bc68d6c R13: ffffc90002bfef08 R14: ffff88800bc6bc7c R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff88811aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020546180 CR3: 0000000117ff1000 CR4: 0000000000750ef0 PKRU: 55555554 Kernel panic - not syncing: Fatal exception Kernel Offset: disabled Reported-by: Dokyung Song <dokyungs@yonsei.ac.kr> Reported-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr> Reported-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr> Signed-off-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221101183642.166450-1-jisoo.jang@yonsei.ac.kr Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 683b9728f28895660c66da250cd31654b8fcbc6e ]

This patch fixes a NULL pointer dereference bug in brcmfmac that occurs
when ptr which is NULL pointer passed as an argument of strlcpy() in
brcmf_c_preinit_dcmds(). This happens when the driver passes a firmware
version string that does not contain a space " ", making strrchr()
return a null pointer. This patch adds a null pointer check.

Found by a modified version of syzkaller.

KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 0 PID: 1983 Comm: kworker/0:2 Not tainted 5.14.0+ #79
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Workqueue: usb_hub_wq hub_event
RIP: 0010:strlen+0x1a/0x90
Code: 23 ff ff ff 66 66 2e 0f 1f 84 00 00 00 00 00 90 48 b8 00 00 00 00
00 fc ff df 48 89 fa 55 48 89 fd 48 c1 ea 03 53 48 83 ec 08 <0f> b6 04
02 48 89 fa 83 e2 07 38 d0 7f 04 84 c0 75 48 80 7d 00 00
RSP: 0018:ffffc90002bfedd8 EFLAGS: 00010296
RAX: dffffc0000000000 RBX: 1ffff9200057fdc1 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000020 RDI: 0000000000000001
RBP: 0000000000000001 R08: 0000000000000039 R09: ffffed1023549801
R10: ffff88811aa4c007 R11: ffffed1023549800 R12: ffff88800bc68d6c
R13: ffffc90002bfef08 R14: ffff88800bc6bc7c R15: 0000000000000001
FS:  0000000000000000(0000) GS:ffff88811aa00000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020546180 CR3: 0000000117ff1000 CR4: 0000000000750ef0
PKRU: 55555554
Call Trace:
 brcmf_c_preinit_dcmds+0x9f2/0xc40
 ? brcmf_c_set_joinpref_default+0x100/0x100
 ? rcu_read_lock_sched_held+0xa1/0xd0
 ? rcu_read_lock_bh_held+0xb0/0xb0
 ? lock_acquire+0x19d/0x4e0
 ? find_held_lock+0x2d/0x110
 ? brcmf_usb_deq+0x1a7/0x260
 ? brcmf_usb_rx_fill_all+0x5a/0xf0
 brcmf_attach+0x246/0xd40
 ? wiphy_new_nm+0x1703/0x1dd0
 ? kmemdup+0x43/0x50
 brcmf_usb_probe+0x12de/0x1690
 ? brcmf_usbdev_qinit.constprop.0+0x470/0x470
 usb_probe_interface+0x2aa/0x760
 ? usb_probe_device+0x250/0x250
 really_probe+0x205/0xb70
 ? driver_allows_async_probing+0x130/0x130
 __driver_probe_device+0x311/0x4b0
 ? driver_allows_async_probing+0x130/0x130
 driver_probe_device+0x4e/0x150
 __device_attach_driver+0x1cc/0x2a0
 bus_for_each_drv+0x156/0x1d0
 ? bus_rescan_devices+0x30/0x30
 ? lockdep_hardirqs_on_prepare+0x273/0x3e0
 ? trace_hardirqs_on+0x46/0x160
 __device_attach+0x23f/0x3a0
 ? device_bind_driver+0xd0/0xd0
 ? kobject_uevent_env+0x287/0x14b0
 bus_probe_device+0x1da/0x290
 device_add+0xb7b/0x1eb0
 ? wait_for_completion+0x290/0x290
 ? __fw_devlink_link_to_suppliers+0x5a0/0x5a0
 usb_set_configuration+0xf59/0x16f0
 usb_generic_driver_probe+0x82/0xa0
 usb_probe_device+0xbb/0x250
 ? usb_suspend+0x590/0x590
 really_probe+0x205/0xb70
 ? driver_allows_async_probing+0x130/0x130
 __driver_probe_device+0x311/0x4b0
 ? usb_generic_driver_match+0x75/0x90
 ? driver_allows_async_probing+0x130/0x130
 driver_probe_device+0x4e/0x150
 __device_attach_driver+0x1cc/0x2a0
 bus_for_each_drv+0x156/0x1d0
 ? bus_rescan_devices+0x30/0x30
 ? _raw_spin_unlock_irqrestore+0x47/0x50
 __device_attach+0x23f/0x3a0
 ? device_bind_driver+0xd0/0xd0
 ? kobject_uevent_env+0x287/0x14b0
 bus_probe_device+0x1da/0x290
 device_add+0xb7b/0x1eb0
 ? __fw_devlink_link_to_suppliers+0x5a0/0x5a0
 ? kfree+0x14a/0x6b0
 ? __usb_get_extra_descriptor+0x116/0x160
 usb_new_device.cold+0x49c/0x1029
 ? hub_disconnect+0x450/0x450
 ? rwlock_bug.part.0+0x90/0x90
 ? _raw_spin_unlock_irq+0x24/0x30
 ? lockdep_hardirqs_on_prepare+0x273/0x3e0
 hub_event+0x248b/0x31c9
 ? usb_port_suspend.cold+0x139/0x139
 ? check_irq_usage+0x861/0xf20
 ? drain_workqueue+0x280/0x360
 ? lock_release+0x640/0x640
 ? rcu_read_lock_sched_held+0xa1/0xd0
 ? rcu_read_lock_bh_held+0xb0/0xb0
 ? lockdep_hardirqs_on_prepare+0x273/0x3e0
 process_one_work+0x92b/0x1460
 ? pwq_dec_nr_in_flight+0x330/0x330
 ? rwlock_bug.part.0+0x90/0x90
 worker_thread+0x95/0xe00
 ? __kthread_parkme+0x115/0x1e0
 ? process_one_work+0x1460/0x1460
 kthread+0x3a1/0x480
 ? set_kthread_struct+0x120/0x120
 ret_from_fork+0x1f/0x30
Modulesdd linked in:
---[ end trace c112c68924ddd800 ]---
RIP: 0010:strlen+0x1a/0x90
Code: 23 ff ff ff 66 66 2e 0f 1f 84 00 00 00 00 00 90 48 b8 00 00 00 00
00 fc ff df 48 89 fa 55 48 89 fd 48 c1 ea 03 53 48 83 ec 08 <0f> b6 04
02 48 89 fa 83 e2 07 38 d0 7f 04 84 c0 75 48 80 7d 00 00
RSP: 0018:ffffc90002bfedd8 EFLAGS: 00010296
RAX: dffffc0000000000 RBX: 1ffff9200057fdc1 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000020 RDI: 0000000000000001
RBP: 0000000000000001 R08: 0000000000000039 R09: ffffed1023549801
R10: ffff88811aa4c007 R11: ffffed1023549800 R12: ffff88800bc68d6c
R13: ffffc90002bfef08 R14: ffff88800bc6bc7c R15: 0000000000000001
FS:  0000000000000000(0000) GS:ffff88811aa00000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020546180 CR3: 0000000117ff1000 CR4: 0000000000750ef0
PKRU: 55555554
Kernel panic - not syncing: Fatal exception
Kernel Offset: disabled

Reported-by: Dokyung Song <dokyungs@yonsei.ac.kr>
Reported-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr>
Reported-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr>
Signed-off-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221101183642.166450-1-jisoo.jang@yonsei.ac.kr
Signed-off-by: Sasha Levin <sashal@kernel.org>
wifi: brcmfmac: Fix potential shift-out-of-bounds in brcmf_fw_alloc_request() 2022-12-31T12:33:00+00:00 Minsuk Kang linuxlovemin@yonsei.ac.kr 2022-10-24T07:13:29+00:00 ffb589963df103caaf062081a32db0b9e1798660 [ Upstream commit 81d17f6f3331f03c8eafdacea68ab773426c1e3c ] This patch fixes a shift-out-of-bounds in brcmfmac that occurs in BIT(chiprev) when a 'chiprev' provided by the device is too large. It should also not be equal to or greater than BITS_PER_TYPE(u32) as we do bitwise AND with a u32 variable and BIT(chiprev). The patch adds a check that makes the function return NULL if that is the case. Note that the NULL case is later handled by the bus-specific caller, brcmf_usb_probe_cb() or brcmf_usb_reset_resume(), for example. Found by a modified version of syzkaller. UBSAN: shift-out-of-bounds in drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c shift exponent 151055786 is too large for 64-bit type 'long unsigned int' CPU: 0 PID: 1885 Comm: kworker/0:2 Tainted: G O 5.14.0+ #132 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Workqueue: usb_hub_wq hub_event Call Trace: dump_stack_lvl+0x57/0x7d ubsan_epilogue+0x5/0x40 __ubsan_handle_shift_out_of_bounds.cold+0x53/0xdb ? lock_chain_count+0x20/0x20 brcmf_fw_alloc_request.cold+0x19/0x3ea ? brcmf_fw_get_firmwares+0x250/0x250 ? brcmf_usb_ioctl_resp_wait+0x1a7/0x1f0 brcmf_usb_get_fwname+0x114/0x1a0 ? brcmf_usb_reset_resume+0x120/0x120 ? number+0x6c4/0x9a0 brcmf_c_process_clm_blob+0x168/0x590 ? put_dec+0x90/0x90 ? enable_ptr_key_workfn+0x20/0x20 ? brcmf_common_pd_remove+0x50/0x50 ? rcu_read_lock_sched_held+0xa1/0xd0 brcmf_c_preinit_dcmds+0x673/0xc40 ? brcmf_c_set_joinpref_default+0x100/0x100 ? rcu_read_lock_sched_held+0xa1/0xd0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? lock_acquire+0x19d/0x4e0 ? find_held_lock+0x2d/0x110 ? brcmf_usb_deq+0x1cc/0x260 ? mark_held_locks+0x9f/0xe0 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 ? _raw_spin_unlock_irqrestore+0x47/0x50 ? trace_hardirqs_on+0x1c/0x120 ? brcmf_usb_deq+0x1a7/0x260 ? brcmf_usb_rx_fill_all+0x5a/0xf0 brcmf_attach+0x246/0xd40 ? wiphy_new_nm+0x1476/0x1d50 ? kmemdup+0x30/0x40 brcmf_usb_probe+0x12de/0x1690 ? brcmf_usbdev_qinit.constprop.0+0x470/0x470 usb_probe_interface+0x25f/0x710 really_probe+0x1be/0xa90 __driver_probe_device+0x2ab/0x460 ? usb_match_id.part.0+0x88/0xc0 driver_probe_device+0x49/0x120 __device_attach_driver+0x18a/0x250 ? driver_allows_async_probing+0x120/0x120 bus_for_each_drv+0x123/0x1a0 ? bus_rescan_devices+0x20/0x20 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 ? trace_hardirqs_on+0x1c/0x120 __device_attach+0x207/0x330 ? device_bind_driver+0xb0/0xb0 ? kobject_uevent_env+0x230/0x12c0 bus_probe_device+0x1a2/0x260 device_add+0xa61/0x1ce0 ? __mutex_unlock_slowpath+0xe7/0x660 ? __fw_devlink_link_to_suppliers+0x550/0x550 usb_set_configuration+0x984/0x1770 ? kernfs_create_link+0x175/0x230 usb_generic_driver_probe+0x69/0x90 usb_probe_device+0x9c/0x220 really_probe+0x1be/0xa90 __driver_probe_device+0x2ab/0x460 driver_probe_device+0x49/0x120 __device_attach_driver+0x18a/0x250 ? driver_allows_async_probing+0x120/0x120 bus_for_each_drv+0x123/0x1a0 ? bus_rescan_devices+0x20/0x20 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 ? trace_hardirqs_on+0x1c/0x120 __device_attach+0x207/0x330 ? device_bind_driver+0xb0/0xb0 ? kobject_uevent_env+0x230/0x12c0 bus_probe_device+0x1a2/0x260 device_add+0xa61/0x1ce0 ? __fw_devlink_link_to_suppliers+0x550/0x550 usb_new_device.cold+0x463/0xf66 ? hub_disconnect+0x400/0x400 ? _raw_spin_unlock_irq+0x24/0x30 hub_event+0x10d5/0x3330 ? hub_port_debounce+0x280/0x280 ? __lock_acquire+0x1671/0x5790 ? wq_calc_node_cpumask+0x170/0x2a0 ? lock_release+0x640/0x640 ? rcu_read_lock_sched_held+0xa1/0xd0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 process_one_work+0x873/0x13e0 ? lock_release+0x640/0x640 ? pwq_dec_nr_in_flight+0x320/0x320 ? rwlock_bug.part.0+0x90/0x90 worker_thread+0x8b/0xd10 ? __kthread_parkme+0xd9/0x1d0 ? process_one_work+0x13e0/0x13e0 kthread+0x379/0x450 ? _raw_spin_unlock_irq+0x24/0x30 ? set_kthread_struct+0x100/0x100 ret_from_fork+0x1f/0x30 Reported-by: Dokyung Song <dokyungs@yonsei.ac.kr> Reported-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr> Reported-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr> Signed-off-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221024071329.504277-1-linuxlovemin@yonsei.ac.kr Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 81d17f6f3331f03c8eafdacea68ab773426c1e3c ]

This patch fixes a shift-out-of-bounds in brcmfmac that occurs in
BIT(chiprev) when a 'chiprev' provided by the device is too large.
It should also not be equal to or greater than BITS_PER_TYPE(u32)
as we do bitwise AND with a u32 variable and BIT(chiprev). The patch
adds a check that makes the function return NULL if that is the case.
Note that the NULL case is later handled by the bus-specific caller,
brcmf_usb_probe_cb() or brcmf_usb_reset_resume(), for example.

Found by a modified version of syzkaller.

UBSAN: shift-out-of-bounds in drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
shift exponent 151055786 is too large for 64-bit type 'long unsigned int'
CPU: 0 PID: 1885 Comm: kworker/0:2 Tainted: G           O      5.14.0+ #132
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Workqueue: usb_hub_wq hub_event
Call Trace:
 dump_stack_lvl+0x57/0x7d
 ubsan_epilogue+0x5/0x40
 __ubsan_handle_shift_out_of_bounds.cold+0x53/0xdb
 ? lock_chain_count+0x20/0x20
 brcmf_fw_alloc_request.cold+0x19/0x3ea
 ? brcmf_fw_get_firmwares+0x250/0x250
 ? brcmf_usb_ioctl_resp_wait+0x1a7/0x1f0
 brcmf_usb_get_fwname+0x114/0x1a0
 ? brcmf_usb_reset_resume+0x120/0x120
 ? number+0x6c4/0x9a0
 brcmf_c_process_clm_blob+0x168/0x590
 ? put_dec+0x90/0x90
 ? enable_ptr_key_workfn+0x20/0x20
 ? brcmf_common_pd_remove+0x50/0x50
 ? rcu_read_lock_sched_held+0xa1/0xd0
 brcmf_c_preinit_dcmds+0x673/0xc40
 ? brcmf_c_set_joinpref_default+0x100/0x100
 ? rcu_read_lock_sched_held+0xa1/0xd0
 ? rcu_read_lock_bh_held+0xb0/0xb0
 ? lock_acquire+0x19d/0x4e0
 ? find_held_lock+0x2d/0x110
 ? brcmf_usb_deq+0x1cc/0x260
 ? mark_held_locks+0x9f/0xe0
 ? lockdep_hardirqs_on_prepare+0x273/0x3e0
 ? _raw_spin_unlock_irqrestore+0x47/0x50
 ? trace_hardirqs_on+0x1c/0x120
 ? brcmf_usb_deq+0x1a7/0x260
 ? brcmf_usb_rx_fill_all+0x5a/0xf0
 brcmf_attach+0x246/0xd40
 ? wiphy_new_nm+0x1476/0x1d50
 ? kmemdup+0x30/0x40
 brcmf_usb_probe+0x12de/0x1690
 ? brcmf_usbdev_qinit.constprop.0+0x470/0x470
 usb_probe_interface+0x25f/0x710
 really_probe+0x1be/0xa90
 __driver_probe_device+0x2ab/0x460
 ? usb_match_id.part.0+0x88/0xc0
 driver_probe_device+0x49/0x120
 __device_attach_driver+0x18a/0x250
 ? driver_allows_async_probing+0x120/0x120
 bus_for_each_drv+0x123/0x1a0
 ? bus_rescan_devices+0x20/0x20
 ? lockdep_hardirqs_on_prepare+0x273/0x3e0
 ? trace_hardirqs_on+0x1c/0x120
 __device_attach+0x207/0x330
 ? device_bind_driver+0xb0/0xb0
 ? kobject_uevent_env+0x230/0x12c0
 bus_probe_device+0x1a2/0x260
 device_add+0xa61/0x1ce0
 ? __mutex_unlock_slowpath+0xe7/0x660
 ? __fw_devlink_link_to_suppliers+0x550/0x550
 usb_set_configuration+0x984/0x1770
 ? kernfs_create_link+0x175/0x230
 usb_generic_driver_probe+0x69/0x90
 usb_probe_device+0x9c/0x220
 really_probe+0x1be/0xa90
 __driver_probe_device+0x2ab/0x460
 driver_probe_device+0x49/0x120
 __device_attach_driver+0x18a/0x250
 ? driver_allows_async_probing+0x120/0x120
 bus_for_each_drv+0x123/0x1a0
 ? bus_rescan_devices+0x20/0x20
 ? lockdep_hardirqs_on_prepare+0x273/0x3e0
 ? trace_hardirqs_on+0x1c/0x120
 __device_attach+0x207/0x330
 ? device_bind_driver+0xb0/0xb0
 ? kobject_uevent_env+0x230/0x12c0
 bus_probe_device+0x1a2/0x260
 device_add+0xa61/0x1ce0
 ? __fw_devlink_link_to_suppliers+0x550/0x550
 usb_new_device.cold+0x463/0xf66
 ? hub_disconnect+0x400/0x400
 ? _raw_spin_unlock_irq+0x24/0x30
 hub_event+0x10d5/0x3330
 ? hub_port_debounce+0x280/0x280
 ? __lock_acquire+0x1671/0x5790
 ? wq_calc_node_cpumask+0x170/0x2a0
 ? lock_release+0x640/0x640
 ? rcu_read_lock_sched_held+0xa1/0xd0
 ? rcu_read_lock_bh_held+0xb0/0xb0
 ? lockdep_hardirqs_on_prepare+0x273/0x3e0
 process_one_work+0x873/0x13e0
 ? lock_release+0x640/0x640
 ? pwq_dec_nr_in_flight+0x320/0x320
 ? rwlock_bug.part.0+0x90/0x90
 worker_thread+0x8b/0xd10
 ? __kthread_parkme+0xd9/0x1d0
 ? process_one_work+0x13e0/0x13e0
 kthread+0x379/0x450
 ? _raw_spin_unlock_irq+0x24/0x30
 ? set_kthread_struct+0x100/0x100
 ret_from_fork+0x1f/0x30

Reported-by: Dokyung Song <dokyungs@yonsei.ac.kr>
Reported-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr>
Reported-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr>
Signed-off-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221024071329.504277-1-linuxlovemin@yonsei.ac.kr
Signed-off-by: Sasha Levin <sashal@kernel.org>
wifi: ath11k: Fix qmi_msg_handler data structure initialization 2022-12-31T12:33:00+00:00 Rahul Bhattacharjee quic_rbhattac@quicinc.com 2022-10-21T09:01:26+00:00 a10e1530c424bb277b4edc7def0195857a548495 [ Upstream commit ed3725e15a154ebebf44e0c34806c57525483f92 ] qmi_msg_handler is required to be null terminated by QMI module. There might be a case where a handler for a msg id is not present in the handlers array which can lead to infinite loop while searching the handler and therefore out of bound access in qmi_invoke_handler(). Hence update the initialization in qmi_msg_handler data structure. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Signed-off-by: Rahul Bhattacharjee <quic_rbhattac@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221021090126.28626-1-quic_rbhattac@quicinc.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit ed3725e15a154ebebf44e0c34806c57525483f92 ]

qmi_msg_handler is required to be null terminated by QMI module.
There might be a case where a handler for a msg id is not present in the
handlers array which can lead to infinite loop while searching the handler
and therefore out of bound access in qmi_invoke_handler().
Hence update the initialization in qmi_msg_handler data structure.

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1

Signed-off-by: Rahul Bhattacharjee <quic_rbhattac@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20221021090126.28626-1-quic_rbhattac@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>