<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-stable.git/drivers/net/wireless, branch v6.1.73</title>
<subtitle>Linux kernel stable tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/'/>
<entry>
<title>wifi: iwlwifi: yoyo: swap cdb and jacket bits values</title>
<updated>2024-01-10T16:10:28+00:00</updated>
<author>
<name>Rotem Saado</name>
<email>rotem.saado@intel.com</email>
</author>
<published>2023-10-04T09:36:22+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=343bb27e31528a2f928f6d6ca1b835c058e1394c'/>
<id>343bb27e31528a2f928f6d6ca1b835c058e1394c</id>
<content type='text'>
[ Upstream commit 65008777b9dcd2002414ddb2c2158293a6e2fd6f ]

The bits are wrong, the jacket bit should be 5 and cdb bit 4.
Fix it.

Fixes: 1f171f4f1437 ("iwlwifi: Add support for getting rf id with blank otp")
Signed-off-by: Rotem Saado &lt;rotem.saado@intel.com&gt;
Signed-off-by: Gregory Greenman &lt;gregory.greenman@intel.com&gt;
Link: https://lore.kernel.org/r/20231004123422.356d8dacda2f.I349ab888b43a11baa2453a1d6978a6a703e422f0@changeid
Signed-off-by: Johannes Berg &lt;johannes.berg@intel.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 65008777b9dcd2002414ddb2c2158293a6e2fd6f ]

The bits are wrong, the jacket bit should be 5 and cdb bit 4.
Fix it.

Fixes: 1f171f4f1437 ("iwlwifi: Add support for getting rf id with blank otp")
Signed-off-by: Rotem Saado &lt;rotem.saado@intel.com&gt;
Signed-off-by: Gregory Greenman &lt;gregory.greenman@intel.com&gt;
Link: https://lore.kernel.org/r/20231004123422.356d8dacda2f.I349ab888b43a11baa2453a1d6978a6a703e422f0@changeid
Signed-off-by: Johannes Berg &lt;johannes.berg@intel.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>wifi: iwlwifi: pcie: don't synchronize IRQs from IRQ</title>
<updated>2024-01-10T16:10:21+00:00</updated>
<author>
<name>Johannes Berg</name>
<email>johannes.berg@intel.com</email>
</author>
<published>2023-12-15T10:13:34+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=3da4868907dad5fc92cb9eb99a972c10ef9b084d'/>
<id>3da4868907dad5fc92cb9eb99a972c10ef9b084d</id>
<content type='text'>
[ Upstream commit 400f6ebbc175286576c7f7fddf3c347d09d12310 ]

On older devices (before unified image!) we can end up calling
stop_device from an rfkill interrupt. However, in stop_device
we attempt to synchronize IRQs, which then of course deadlocks.

Avoid this by checking the context, if running from the IRQ
thread then don't synchronize. This wouldn't be correct on a
new device since RSS is supported, but older devices only have
a single interrupt/queue.

Fixes: 37fb29bd1f90 ("wifi: iwlwifi: pcie: synchronize IRQs before NAPI")
Reviewed-by: Miri Korenblit &lt;miriam.rachel.korenblit@intel.com&gt;
Reviewed-by: Emmanuel Grumbach &lt;emmanuel.grumbach@intel.com&gt;
Signed-off-by: Johannes Berg &lt;johannes.berg@intel.com&gt;
Signed-off-by: Kalle Valo &lt;kvalo@kernel.org&gt;
Link: https://msgid.link/20231215111335.59aab00baed7.Iadfe154d6248e7f9dfd69522e5429dbbd72925d7@changeid
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 400f6ebbc175286576c7f7fddf3c347d09d12310 ]

On older devices (before unified image!) we can end up calling
stop_device from an rfkill interrupt. However, in stop_device
we attempt to synchronize IRQs, which then of course deadlocks.

Avoid this by checking the context, if running from the IRQ
thread then don't synchronize. This wouldn't be correct on a
new device since RSS is supported, but older devices only have
a single interrupt/queue.

Fixes: 37fb29bd1f90 ("wifi: iwlwifi: pcie: synchronize IRQs before NAPI")
Reviewed-by: Miri Korenblit &lt;miriam.rachel.korenblit@intel.com&gt;
Reviewed-by: Emmanuel Grumbach &lt;emmanuel.grumbach@intel.com&gt;
Signed-off-by: Johannes Berg &lt;johannes.berg@intel.com&gt;
Signed-off-by: Kalle Valo &lt;kvalo@kernel.org&gt;
Link: https://msgid.link/20231215111335.59aab00baed7.Iadfe154d6248e7f9dfd69522e5429dbbd72925d7@changeid
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>wifi: iwlwifi: pcie: add another missing bh-disable for rxq-&gt;lock</title>
<updated>2024-01-01T12:38:54+00:00</updated>
<author>
<name>Johannes Berg</name>
<email>johannes.berg@intel.com</email>
</author>
<published>2023-12-08T16:32:02+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=e90da1c7c6e7d074bb3f5ccf6e7c37e63a1158f3'/>
<id>e90da1c7c6e7d074bb3f5ccf6e7c37e63a1158f3</id>
<content type='text'>
[ Upstream commit a4754182dc936b97ec7e9f6b08cdf7ed97ef9069 ]

Evidently I had only looked at all the ones in rx.c, and missed this.
Add bh-disable to this use of the rxq-&gt;lock as well.

Fixes: 25edc8f259c7 ("iwlwifi: pcie: properly implement NAPI")
Reported-by: Brian Norris &lt;briannorris@chromium.org&gt;
Signed-off-by: Johannes Berg &lt;johannes.berg@intel.com&gt;
Signed-off-by: Miri Korenblit &lt;miriam.rachel.korenblit@intel.com&gt;
Link: https://msgid.link/20231208183100.e79ad3dae649.I8f19713c4383707f8be7fc20ff5cc1ecf12429bb@changeid
Signed-off-by: Johannes Berg &lt;johannes.berg@intel.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit a4754182dc936b97ec7e9f6b08cdf7ed97ef9069 ]

Evidently I had only looked at all the ones in rx.c, and missed this.
Add bh-disable to this use of the rxq-&gt;lock as well.

Fixes: 25edc8f259c7 ("iwlwifi: pcie: properly implement NAPI")
Reported-by: Brian Norris &lt;briannorris@chromium.org&gt;
Signed-off-by: Johannes Berg &lt;johannes.berg@intel.com&gt;
Signed-off-by: Miri Korenblit &lt;miriam.rachel.korenblit@intel.com&gt;
Link: https://msgid.link/20231208183100.e79ad3dae649.I8f19713c4383707f8be7fc20ff5cc1ecf12429bb@changeid
Signed-off-by: Johannes Berg &lt;johannes.berg@intel.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>wifi: wilc1000: use vmm_table as array in wilc struct</title>
<updated>2023-11-28T17:07:11+00:00</updated>
<author>
<name>Ajay Singh</name>
<email>ajay.kathat@microchip.com</email>
</author>
<published>2023-10-17T08:43:38+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=4b0d6ddb6466d10df878a7787f175a0e4adc3e27'/>
<id>4b0d6ddb6466d10df878a7787f175a0e4adc3e27</id>
<content type='text'>
commit 05ac1a198a63ad66bf5ae8b7321407c102d40ef3 upstream.

Enabling KASAN and running some iperf tests raises some memory issues with
vmm_table:

BUG: KASAN: slab-out-of-bounds in wilc_wlan_handle_txq+0x6ac/0xdb4
Write of size 4 at addr c3a61540 by task wlan0-tx/95

KASAN detects that we are writing data beyond range allocated to vmm_table.
There is indeed a mismatch between the size passed to allocator in
wilc_wlan_init, and the range of possible indexes used later: allocation
size is missing a multiplication by sizeof(u32)

Fixes: 40b717bfcefa ("wifi: wilc1000: fix DMA on stack objects")
Cc: stable@vger.kernel.org
Signed-off-by: Ajay Singh &lt;ajay.kathat@microchip.com&gt;
Signed-off-by: Alexis Lothoré &lt;alexis.lothore@bootlin.com&gt;
Reviewed-by: Michael Walle &lt;mwalle@kernel.org&gt;
Reviewed-by: Jeff Johnson &lt;quic_jjohnson@quicinc.com&gt;
Signed-off-by: Kalle Valo &lt;kvalo@kernel.org&gt;
Link: https://lore.kernel.org/r/20231017-wilc1000_tx_oops-v3-1-b2155f1f7bee@bootlin.com
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 05ac1a198a63ad66bf5ae8b7321407c102d40ef3 upstream.

Enabling KASAN and running some iperf tests raises some memory issues with
vmm_table:

BUG: KASAN: slab-out-of-bounds in wilc_wlan_handle_txq+0x6ac/0xdb4
Write of size 4 at addr c3a61540 by task wlan0-tx/95

KASAN detects that we are writing data beyond range allocated to vmm_table.
There is indeed a mismatch between the size passed to allocator in
wilc_wlan_init, and the range of possible indexes used later: allocation
size is missing a multiplication by sizeof(u32)

Fixes: 40b717bfcefa ("wifi: wilc1000: fix DMA on stack objects")
Cc: stable@vger.kernel.org
Signed-off-by: Ajay Singh &lt;ajay.kathat@microchip.com&gt;
Signed-off-by: Alexis Lothoré &lt;alexis.lothore@bootlin.com&gt;
Reviewed-by: Michael Walle &lt;mwalle@kernel.org&gt;
Reviewed-by: Jeff Johnson &lt;quic_jjohnson@quicinc.com&gt;
Signed-off-by: Kalle Valo &lt;kvalo@kernel.org&gt;
Link: https://lore.kernel.org/r/20231017-wilc1000_tx_oops-v3-1-b2155f1f7bee@bootlin.com
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>wifi: ath11k: fix gtk offload status event locking</title>
<updated>2023-11-28T17:07:09+00:00</updated>
<author>
<name>Johan Hovold</name>
<email>johan+linaro@kernel.org</email>
</author>
<published>2023-10-19T15:53:42+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=0cf7577b6b3153b4b49deea9719fe43f96469c6d'/>
<id>0cf7577b6b3153b4b49deea9719fe43f96469c6d</id>
<content type='text'>
commit 1dea3c0720a146bd7193969f2847ccfed5be2221 upstream.

The ath11k active pdevs are protected by RCU but the gtk offload status
event handling code calling ath11k_mac_get_arvif_by_vdev_id() was not
marked as a read-side critical section.

Mark the code in question as an RCU read-side critical section to avoid
any potential use-after-free issues.

Compile tested only.

Fixes: a16d9b50cfba ("ath11k: support GTK rekey offload")
Cc: stable@vger.kernel.org      # 5.18
Cc: Carl Huang &lt;quic_cjhuang@quicinc.com&gt;
Signed-off-by: Johan Hovold &lt;johan+linaro@kernel.org&gt;
Acked-by: Jeff Johnson &lt;quic_jjohnson@quicinc.com&gt;
Signed-off-by: Kalle Valo &lt;quic_kvalo@quicinc.com&gt;
Link: https://lore.kernel.org/r/20231019155342.31631-1-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 1dea3c0720a146bd7193969f2847ccfed5be2221 upstream.

The ath11k active pdevs are protected by RCU but the gtk offload status
event handling code calling ath11k_mac_get_arvif_by_vdev_id() was not
marked as a read-side critical section.

Mark the code in question as an RCU read-side critical section to avoid
any potential use-after-free issues.

Compile tested only.

Fixes: a16d9b50cfba ("ath11k: support GTK rekey offload")
Cc: stable@vger.kernel.org      # 5.18
Cc: Carl Huang &lt;quic_cjhuang@quicinc.com&gt;
Signed-off-by: Johan Hovold &lt;johan+linaro@kernel.org&gt;
Acked-by: Jeff Johnson &lt;quic_jjohnson@quicinc.com&gt;
Signed-off-by: Kalle Valo &lt;quic_kvalo@quicinc.com&gt;
Link: https://lore.kernel.org/r/20231019155342.31631-1-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>wifi: ath11k: fix htt pktlog locking</title>
<updated>2023-11-28T17:07:09+00:00</updated>
<author>
<name>Johan Hovold</name>
<email>johan+linaro@kernel.org</email>
</author>
<published>2023-10-19T11:25:21+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=e3199b3fac65c9f103055390b6fd07c5cffa5961'/>
<id>e3199b3fac65c9f103055390b6fd07c5cffa5961</id>
<content type='text'>
commit 3f77c7d605b29df277d77e9ee75d96e7ad145d2d upstream.

The ath11k active pdevs are protected by RCU but the htt pktlog handling
code calling ath11k_mac_get_ar_by_pdev_id() was not marked as a
read-side critical section.

Mark the code in question as an RCU read-side critical section to avoid
any potential use-after-free issues.

Compile tested only.

Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Cc: stable@vger.kernel.org      # 5.6
Signed-off-by: Johan Hovold &lt;johan+linaro@kernel.org&gt;
Signed-off-by: Kalle Valo &lt;quic_kvalo@quicinc.com&gt;
Link: https://lore.kernel.org/r/20231019112521.2071-1-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 3f77c7d605b29df277d77e9ee75d96e7ad145d2d upstream.

The ath11k active pdevs are protected by RCU but the htt pktlog handling
code calling ath11k_mac_get_ar_by_pdev_id() was not marked as a
read-side critical section.

Mark the code in question as an RCU read-side critical section to avoid
any potential use-after-free issues.

Compile tested only.

Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Cc: stable@vger.kernel.org      # 5.6
Signed-off-by: Johan Hovold &lt;johan+linaro@kernel.org&gt;
Signed-off-by: Kalle Valo &lt;quic_kvalo@quicinc.com&gt;
Link: https://lore.kernel.org/r/20231019112521.2071-1-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>wifi: ath11k: fix dfs radar event locking</title>
<updated>2023-11-28T17:07:09+00:00</updated>
<author>
<name>Johan Hovold</name>
<email>johan+linaro@kernel.org</email>
</author>
<published>2023-10-19T15:31:15+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=ca420ac4f9451f22347bae44b18ab47ba2c267ec'/>
<id>ca420ac4f9451f22347bae44b18ab47ba2c267ec</id>
<content type='text'>
commit 3b6c14833165f689cc5928574ebafe52bbce5f1e upstream.

The ath11k active pdevs are protected by RCU but the DFS radar event
handling code calling ath11k_mac_get_ar_by_pdev_id() was not marked as a
read-side critical section.

Mark the code in question as an RCU read-side critical section to avoid
any potential use-after-free issues.

Compile tested only.

Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Cc: stable@vger.kernel.org      # 5.6
Acked-by: Jeff Johnson &lt;quic_jjohnson@quicinc.com&gt;
Signed-off-by: Johan Hovold &lt;johan+linaro@kernel.org&gt;
Signed-off-by: Kalle Valo &lt;quic_kvalo@quicinc.com&gt;
Link: https://lore.kernel.org/r/20231019153115.26401-3-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 3b6c14833165f689cc5928574ebafe52bbce5f1e upstream.

The ath11k active pdevs are protected by RCU but the DFS radar event
handling code calling ath11k_mac_get_ar_by_pdev_id() was not marked as a
read-side critical section.

Mark the code in question as an RCU read-side critical section to avoid
any potential use-after-free issues.

Compile tested only.

Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Cc: stable@vger.kernel.org      # 5.6
Acked-by: Jeff Johnson &lt;quic_jjohnson@quicinc.com&gt;
Signed-off-by: Johan Hovold &lt;johan+linaro@kernel.org&gt;
Signed-off-by: Kalle Valo &lt;quic_kvalo@quicinc.com&gt;
Link: https://lore.kernel.org/r/20231019153115.26401-3-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>wifi: ath11k: fix temperature event locking</title>
<updated>2023-11-28T17:07:09+00:00</updated>
<author>
<name>Johan Hovold</name>
<email>johan+linaro@kernel.org</email>
</author>
<published>2023-10-19T15:31:14+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=f0ea9e4726118b6ec58d8f6acbc341b71a5795b3'/>
<id>f0ea9e4726118b6ec58d8f6acbc341b71a5795b3</id>
<content type='text'>
commit 1a5352a81b4720ba43d9c899974e3bddf7ce0ce8 upstream.

The ath11k active pdevs are protected by RCU but the temperature event
handling code calling ath11k_mac_get_ar_by_pdev_id() was not marked as a
read-side critical section as reported by RCU lockdep:

	=============================
	WARNING: suspicious RCU usage
	6.6.0-rc6 #7 Not tainted
	-----------------------------
	drivers/net/wireless/ath/ath11k/mac.c:638 suspicious rcu_dereference_check() usage!

	other info that might help us debug this:

	rcu_scheduler_active = 2, debug_locks = 1
	no locks held by swapper/0/0.
	...
	Call trace:
	...
	 lockdep_rcu_suspicious+0x16c/0x22c
	 ath11k_mac_get_ar_by_pdev_id+0x194/0x1b0 [ath11k]
	 ath11k_wmi_tlv_op_rx+0xa84/0x2c1c [ath11k]
	 ath11k_htc_rx_completion_handler+0x388/0x510 [ath11k]

Mark the code in question as an RCU read-side critical section to avoid
any potential use-after-free issues.

Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23

Fixes: a41d10348b01 ("ath11k: add thermal sensor device support")
Cc: stable@vger.kernel.org      # 5.7
Signed-off-by: Johan Hovold &lt;johan+linaro@kernel.org&gt;
Acked-by: Jeff Johnson &lt;quic_jjohnson@quicinc.com&gt;
Signed-off-by: Kalle Valo &lt;quic_kvalo@quicinc.com&gt;
Link: https://lore.kernel.org/r/20231019153115.26401-2-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 1a5352a81b4720ba43d9c899974e3bddf7ce0ce8 upstream.

The ath11k active pdevs are protected by RCU but the temperature event
handling code calling ath11k_mac_get_ar_by_pdev_id() was not marked as a
read-side critical section as reported by RCU lockdep:

	=============================
	WARNING: suspicious RCU usage
	6.6.0-rc6 #7 Not tainted
	-----------------------------
	drivers/net/wireless/ath/ath11k/mac.c:638 suspicious rcu_dereference_check() usage!

	other info that might help us debug this:

	rcu_scheduler_active = 2, debug_locks = 1
	no locks held by swapper/0/0.
	...
	Call trace:
	...
	 lockdep_rcu_suspicious+0x16c/0x22c
	 ath11k_mac_get_ar_by_pdev_id+0x194/0x1b0 [ath11k]
	 ath11k_wmi_tlv_op_rx+0xa84/0x2c1c [ath11k]
	 ath11k_htc_rx_completion_handler+0x388/0x510 [ath11k]

Mark the code in question as an RCU read-side critical section to avoid
any potential use-after-free issues.

Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23

Fixes: a41d10348b01 ("ath11k: add thermal sensor device support")
Cc: stable@vger.kernel.org      # 5.7
Signed-off-by: Johan Hovold &lt;johan+linaro@kernel.org&gt;
Acked-by: Jeff Johnson &lt;quic_jjohnson@quicinc.com&gt;
Signed-off-by: Kalle Valo &lt;quic_kvalo@quicinc.com&gt;
Link: https://lore.kernel.org/r/20231019153115.26401-2-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>wifi: iwlwifi: Use FW rate for non-data frames</title>
<updated>2023-11-28T17:07:03+00:00</updated>
<author>
<name>Miri Korenblit</name>
<email>miriam.rachel.korenblit@intel.com</email>
</author>
<published>2023-09-13T11:56:45+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=3a6ad749e9ef5f40de344f3e750a9b73397375b7'/>
<id>3a6ad749e9ef5f40de344f3e750a9b73397375b7</id>
<content type='text'>
[ Upstream commit 499d02790495958506a64f37ceda7e97345a50a8 ]

Currently we are setting the rate in the tx cmd for
mgmt frames (e.g. during connection establishment).
This was problematic when sending mgmt frames in eSR mode,
as we don't know what link this frame will be sent on
(This is decided by the FW), so we don't know what is the
lowest rate.
Fix this by not setting the rate in tx cmd and rely
on FW to choose the right one.
Set rate only for injected frames with fixed rate,
or when no sta is given.
Also set for important frames (EAPOL etc.) the High Priority flag.

Fixes: 055b22e770dd ("iwlwifi: mvm: Set Tx rate and flags when there is not station")
Signed-off-by: Miri Korenblit &lt;miriam.rachel.korenblit@intel.com&gt;
Signed-off-by: Gregory Greenman &lt;gregory.greenman@intel.com&gt;
Link: https://lore.kernel.org/r/20230913145231.6c7e59620ee0.I6eaed3ccdd6dd62b9e664facc484081fc5275843@changeid
Signed-off-by: Johannes Berg &lt;johannes.berg@intel.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 499d02790495958506a64f37ceda7e97345a50a8 ]

Currently we are setting the rate in the tx cmd for
mgmt frames (e.g. during connection establishment).
This was problematic when sending mgmt frames in eSR mode,
as we don't know what link this frame will be sent on
(This is decided by the FW), so we don't know what is the
lowest rate.
Fix this by not setting the rate in tx cmd and rely
on FW to choose the right one.
Set rate only for injected frames with fixed rate,
or when no sta is given.
Also set for important frames (EAPOL etc.) the High Priority flag.

Fixes: 055b22e770dd ("iwlwifi: mvm: Set Tx rate and flags when there is not station")
Signed-off-by: Miri Korenblit &lt;miriam.rachel.korenblit@intel.com&gt;
Signed-off-by: Gregory Greenman &lt;gregory.greenman@intel.com&gt;
Link: https://lore.kernel.org/r/20230913145231.6c7e59620ee0.I6eaed3ccdd6dd62b9e664facc484081fc5275843@changeid
Signed-off-by: Johannes Berg &lt;johannes.berg@intel.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>wifi: ath10k: Don't touch the CE interrupt registers after power up</title>
<updated>2023-11-28T17:06:56+00:00</updated>
<author>
<name>Douglas Anderson</name>
<email>dianders@chromium.org</email>
</author>
<published>2023-09-30T04:54:48+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=459970363e7c9712f93eba66b51fd49bd464dbaf'/>
<id>459970363e7c9712f93eba66b51fd49bd464dbaf</id>
<content type='text'>
[ Upstream commit 170c75d43a77dc937c58f07ecf847ba1b42ab74e ]

As talked about in commit d66d24ac300c ("ath10k: Keep track of which
interrupts fired, don't poll them"), if we access the copy engine
register at a bad time then ath10k can go boom. However, it's not
necessarily easy to know when it's safe to access them.

The ChromeOS test labs saw a crash that looked like this at
shutdown/reboot time (on a chromeos-5.15 kernel, but likely the
problem could also reproduce upstream):

Internal error: synchronous external abort: 96000010 [#1] PREEMPT SMP
...
CPU: 4 PID: 6168 Comm: reboot Not tainted 5.15.111-lockdep-19350-g1d624fe6758f #1 010b9b233ab055c27c6dc88efb0be2f4e9e86f51
Hardware name: Google Kingoftown (DT)
...
pc : ath10k_snoc_read32+0x50/0x74 [ath10k_snoc]
lr : ath10k_snoc_read32+0x24/0x74 [ath10k_snoc]
...
Call trace:
ath10k_snoc_read32+0x50/0x74 [ath10k_snoc ...]
ath10k_ce_disable_interrupt+0x190/0x65c [ath10k_core ...]
ath10k_ce_disable_interrupts+0x8c/0x120 [ath10k_core ...]
ath10k_snoc_hif_stop+0x78/0x660 [ath10k_snoc ...]
ath10k_core_stop+0x13c/0x1ec [ath10k_core ...]
ath10k_halt+0x398/0x5b0 [ath10k_core ...]
ath10k_stop+0xfc/0x1a8 [ath10k_core ...]
drv_stop+0x148/0x6b4 [mac80211 ...]
ieee80211_stop_device+0x70/0x80 [mac80211 ...]
ieee80211_do_stop+0x10d8/0x15b0 [mac80211 ...]
ieee80211_stop+0x144/0x1a0 [mac80211 ...]
__dev_close_many+0x1e8/0x2c0
dev_close_many+0x198/0x33c
dev_close+0x140/0x210
cfg80211_shutdown_all_interfaces+0xc8/0x1e0 [cfg80211 ...]
ieee80211_remove_interfaces+0x118/0x5c4 [mac80211 ...]
ieee80211_unregister_hw+0x64/0x1f4 [mac80211 ...]
ath10k_mac_unregister+0x4c/0xf0 [ath10k_core ...]
ath10k_core_unregister+0x80/0xb0 [ath10k_core ...]
ath10k_snoc_free_resources+0xb8/0x1ec [ath10k_snoc ...]
ath10k_snoc_shutdown+0x98/0xd0 [ath10k_snoc ...]
platform_shutdown+0x7c/0xa0
device_shutdown+0x3e0/0x58c
kernel_restart_prepare+0x68/0xa0
kernel_restart+0x28/0x7c

Though there's no known way to reproduce the problem, it makes sense
that it would be the same issue where we're trying to access copy
engine registers when it's not allowed.

Let's fix this by changing how we "disable" the interrupts. Instead of
tweaking the copy engine registers we'll just use disable_irq() and
enable_irq(). Then we'll configure the interrupts once at power up
time.

Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.2.2.c10-00754-QCAHLSWMTPL-1

Signed-off-by: Douglas Anderson &lt;dianders@chromium.org&gt;
Signed-off-by: Kalle Valo &lt;quic_kvalo@quicinc.com&gt;
Link: https://lore.kernel.org/r/20230630151842.1.If764ede23c4e09a43a842771c2ddf99608f25f8e@changeid
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 170c75d43a77dc937c58f07ecf847ba1b42ab74e ]

As talked about in commit d66d24ac300c ("ath10k: Keep track of which
interrupts fired, don't poll them"), if we access the copy engine
register at a bad time then ath10k can go boom. However, it's not
necessarily easy to know when it's safe to access them.

The ChromeOS test labs saw a crash that looked like this at
shutdown/reboot time (on a chromeos-5.15 kernel, but likely the
problem could also reproduce upstream):

Internal error: synchronous external abort: 96000010 [#1] PREEMPT SMP
...
CPU: 4 PID: 6168 Comm: reboot Not tainted 5.15.111-lockdep-19350-g1d624fe6758f #1 010b9b233ab055c27c6dc88efb0be2f4e9e86f51
Hardware name: Google Kingoftown (DT)
...
pc : ath10k_snoc_read32+0x50/0x74 [ath10k_snoc]
lr : ath10k_snoc_read32+0x24/0x74 [ath10k_snoc]
...
Call trace:
ath10k_snoc_read32+0x50/0x74 [ath10k_snoc ...]
ath10k_ce_disable_interrupt+0x190/0x65c [ath10k_core ...]
ath10k_ce_disable_interrupts+0x8c/0x120 [ath10k_core ...]
ath10k_snoc_hif_stop+0x78/0x660 [ath10k_snoc ...]
ath10k_core_stop+0x13c/0x1ec [ath10k_core ...]
ath10k_halt+0x398/0x5b0 [ath10k_core ...]
ath10k_stop+0xfc/0x1a8 [ath10k_core ...]
drv_stop+0x148/0x6b4 [mac80211 ...]
ieee80211_stop_device+0x70/0x80 [mac80211 ...]
ieee80211_do_stop+0x10d8/0x15b0 [mac80211 ...]
ieee80211_stop+0x144/0x1a0 [mac80211 ...]
__dev_close_many+0x1e8/0x2c0
dev_close_many+0x198/0x33c
dev_close+0x140/0x210
cfg80211_shutdown_all_interfaces+0xc8/0x1e0 [cfg80211 ...]
ieee80211_remove_interfaces+0x118/0x5c4 [mac80211 ...]
ieee80211_unregister_hw+0x64/0x1f4 [mac80211 ...]
ath10k_mac_unregister+0x4c/0xf0 [ath10k_core ...]
ath10k_core_unregister+0x80/0xb0 [ath10k_core ...]
ath10k_snoc_free_resources+0xb8/0x1ec [ath10k_snoc ...]
ath10k_snoc_shutdown+0x98/0xd0 [ath10k_snoc ...]
platform_shutdown+0x7c/0xa0
device_shutdown+0x3e0/0x58c
kernel_restart_prepare+0x68/0xa0
kernel_restart+0x28/0x7c

Though there's no known way to reproduce the problem, it makes sense
that it would be the same issue where we're trying to access copy
engine registers when it's not allowed.

Let's fix this by changing how we "disable" the interrupts. Instead of
tweaking the copy engine registers we'll just use disable_irq() and
enable_irq(). Then we'll configure the interrupts once at power up
time.

Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.2.2.c10-00754-QCAHLSWMTPL-1

Signed-off-by: Douglas Anderson &lt;dianders@chromium.org&gt;
Signed-off-by: Kalle Valo &lt;quic_kvalo@quicinc.com&gt;
Link: https://lore.kernel.org/r/20230630151842.1.If764ede23c4e09a43a842771c2ddf99608f25f8e@changeid
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
</feed>
