linux-stable.git/drivers/net/wireless, branch v5.4.84

iwlwifi: mvm: fix kernel panic in case of assert during CSA

2020-12-16T09:56:55+00:00

[ Upstream commit fe56d05ee6c87f6a1a8c7267affd92c9438249cc ]

During CSA, we briefly nullify the phy context, in __iwl_mvm_unassign_vif_chanctx.
In case we have a FW assert right after it, it remains NULL though.
We end up running into endless loop due to mac80211 trying repeatedly to
move us to ASSOC state, and we keep returning -EINVAL. Later down the road
we hit a kernel panic.

Detect and avoid this endless loop.

Signed-off-by: Sara Sharon 
Signed-off-by: Luca Coelho 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/iwlwifi.20201107104557.d64de2c17bff.Iedd0d2afa20a2aacba5259a5cae31cb3a119a4eb@changeid
Signed-off-by: Sasha Levin

iwlwifi: pcie: set LTR to avoid completion timeout

2020-12-16T09:56:55+00:00

[ Upstream commit edb625208d84aef179e3f16590c1c582fc5fdae6 ]

On some platforms, the preset values aren't correct and then we may
get a completion timeout in the firmware. Change the LTR configuration
to avoid that. The firmware will do some more complex reinit of this
later, but for the boot process we use ~250usec.

Signed-off-by: Johannes Berg 
Signed-off-by: Luca Coelho 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/iwlwifi.20201107104557.d83d591c05ba.I42885c9fb500bc08b9a4c07c4ff3d436cc7a3c84@changeid
Signed-off-by: Sasha Levin

iwlwifi: pcie: limit memory read spin time

2020-12-16T09:56:55+00:00

[ Upstream commit 04516706bb99889986ddfa3a769ed50d2dc7ac13 ]

When we read device memory, we lock a spinlock, write the address we
want to read from the device and then spin in a loop reading the data
in 32-bit quantities from another register.

As the description makes clear, this is rather inefficient, incurring
a PCIe bus transaction for every read. In a typical device today, we
want to read 786k SMEM if it crashes, leading to 192k register reads.
Occasionally, we've seen the whole loop take over 20 seconds and then
triggering the soft lockup detector.

Clearly, it is unreasonable to spin here for such extended periods of
time.

To fix this, break the loop down into an outer and an inner loop, and
break out of the inner loop if more than half a second elapsed. To
avoid too much overhead, check for that only every 128 reads, though
there's no particular reason for that number. Then, unlock and relock
to obtain NIC access again, reprogram the start address and continue.

This will keep (interrupt) latencies on the CPU down to a reasonable
time.

Signed-off-by: Johannes Berg 
Signed-off-by: Mordechay Goodstein 
Signed-off-by: Luca Coelho 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/iwlwifi.20201022165103.45878a7e49aa.I3b9b9c5a10002915072312ce75b68ed5b3dc6e14@changeid
Signed-off-by: Sasha Levin

rtw88: debug: Fix uninitialized memory in debugfs code

2020-12-11T12:23:32+00:00

commit 74a8c816fa8fa7862df870660e9821abb56649fe upstream.

This code does not ensure that the whole buffer is initialized and none
of the callers check for errors so potentially none of the buffer is
initialized.  Add a memset to eliminate this bug.

Fixes: e3037485c68e ("rtw88: new Realtek 802.11ac driver")
Signed-off-by: Dan Carpenter 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/X8ilOfVz3pf0T5ec@mwanda
Signed-off-by: Greg Kroah-Hartman

iwlwifi: mvm: write queue_sync_state only for sync

2020-12-02T07:49:50+00:00

[ Upstream commit 97cc16943f23078535fdbce4f6391b948b4ccc08 ]

We use mvm->queue_sync_state to wait for synchronous queue sync
messages, but if an async one happens inbetween we shouldn't
clear mvm->queue_sync_state after sending the async one, that
can run concurrently (at least from the CPU POV) with another
synchronous queue sync.

Signed-off-by: Johannes Berg 
Fixes: 3c514bf831ac ("iwlwifi: mvm: add a loose synchronization of the NSSN across Rx queues")
Signed-off-by: Luca Coelho 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/iwlwifi.20201107104557.51a3148f2c14.I0772171dbaec87433a11513e9586d98b5d920b5f@changeid
Signed-off-by: Sasha Levin

ath9k_htc: Use appropriate rs_datalen type

2020-11-18T18:20:21+00:00

commit 5024f21c159f8c1668f581fff37140741c0b1ba9 upstream.

kernel test robot says:
drivers/net/wireless/ath/ath9k/htc_drv_txrx.c:987:20: sparse: warning: incorrect type in assignment (different base types)
drivers/net/wireless/ath/ath9k/htc_drv_txrx.c:987:20: sparse:    expected restricted __be16 [usertype] rs_datalen
drivers/net/wireless/ath/ath9k/htc_drv_txrx.c:987:20: sparse:    got unsigned short [usertype]
drivers/net/wireless/ath/ath9k/htc_drv_txrx.c:988:13: sparse: warning: restricted __be16 degrades to integer
drivers/net/wireless/ath/ath9k/htc_drv_txrx.c:1001:13: sparse: warning: restricted __be16 degrades to integer

Indeed rs_datalen has host byte order, so modify it's own type.

Reported-by: kernel test robot 
Fixes: cd486e627e67 ("ath9k_htc: Discard undersized packets")
Signed-off-by: Masashi Honma 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/20200808233258.4596-1-masashi.honma@gmail.com
Signed-off-by: Greg Kroah-Hartman

brcmfmac: Fix warning message after dongle setup failed

2020-11-05T10:43:19+00:00

[ Upstream commit 6aa5a83a7ed8036c1388a811eb8bdfa77b21f19c ]

Brcmfmac showed warning message in fweh.c when checking the size of event
queue which is not initialized. Therefore, we only cancel the worker and
reset event handler only when it is initialized.

[  145.505899] brcmfmac 0000:02:00.0: brcmf_pcie_setup: Dongle setup
[  145.929970] ------------[ cut here ]------------
[  145.929994] WARNING: CPU: 0 PID: 288 at drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c:312
brcmf_fweh_detach+0xbc/0xd0 [brcmfmac]
...
[  145.930029] Call Trace:
[  145.930036]  brcmf_detach+0x77/0x100 [brcmfmac]
[  145.930043]  brcmf_pcie_remove+0x79/0x130 [brcmfmac]
[  145.930046]  pci_device_remove+0x39/0xc0
[  145.930048]  device_release_driver_internal+0x141/0x200
[  145.930049]  device_release_driver+0x12/0x20
[  145.930054]  brcmf_pcie_setup+0x101/0x3c0 [brcmfmac]
[  145.930060]  brcmf_fw_request_done+0x11d/0x1f0 [brcmfmac]
[  145.930062]  ? lock_timer_base+0x7d/0xa0
[  145.930063]  ? internal_add_timer+0x1f/0xa0
[  145.930064]  ? add_timer+0x11a/0x1d0
[  145.930066]  ? __kmalloc_track_caller+0x18c/0x230
[  145.930068]  ? kstrdup_const+0x23/0x30
[  145.930069]  ? add_dr+0x46/0x80
[  145.930070]  ? devres_add+0x3f/0x50
[  145.930072]  ? usermodehelper_read_unlock+0x15/0x20
[  145.930073]  ? _request_firmware+0x288/0xa20
[  145.930075]  request_firmware_work_func+0x36/0x60
[  145.930077]  process_one_work+0x144/0x360
[  145.930078]  worker_thread+0x4d/0x3c0
[  145.930079]  kthread+0x112/0x150
[  145.930080]  ? rescuer_thread+0x340/0x340
[  145.930081]  ? kthread_park+0x60/0x60
[  145.930083]  ret_from_fork+0x25/0x30

Signed-off-by: Wright Feng 
Signed-off-by: Chi-hsien Lin 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/20200928054922.44580-3-wright.feng@cypress.com
Signed-off-by: Sasha Levin

ath10k: fix VHT NSS calculation when STBC is enabled

2020-11-05T10:43:15+00:00

[ Upstream commit 99f41b8e43b8b4b31262adb8ac3e69088fff1289 ]

When STBC is enabled, NSTS_SU value need to be accounted for VHT NSS
calculation for SU case.

Without this fix, 1SS + STBC enabled case was reported wrongly as 2SS
in radiotap header on monitor mode capture.

Tested-on: QCA9984 10.4-3.10-00047

Signed-off-by: Sathishkumar Muruganandam 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/1597392971-3897-1-git-send-email-murugana@codeaurora.org
Signed-off-by: Sasha Levin

ath10k: start recovery process when payload length exceeds max htc length for sdio

2020-11-05T10:43:15+00:00

[ Upstream commit 2fd3c8f34d08af0a6236085f9961866ad92ef9ec ]

When simulate random transfer fail for sdio write and read, it happened
"payload length exceeds max htc length" and recovery later sometimes.

Test steps:
1. Add config and update kernel:
CONFIG_FAIL_MMC_REQUEST=y
CONFIG_FAULT_INJECTION=y
CONFIG_FAULT_INJECTION_DEBUG_FS=y

2. Run simulate fail:
cd /sys/kernel/debug/mmc1/fail_mmc_request
echo 10 > probability
echo 10 > times # repeat until hitting issues

3. It happened payload length exceeds max htc length.
[  199.935506] ath10k_sdio mmc1:0001:1: payload length 57005 exceeds max htc length: 4088
....
[  264.990191] ath10k_sdio mmc1:0001:1: payload length 57005 exceeds max htc length: 4088

4. after some time, such as 60 seconds, it start recovery which triggered
by wmi command timeout for periodic scan.
[  269.229232] ieee80211 phy0: Hardware restart was requested
[  269.734693] ath10k_sdio mmc1:0001:1: device successfully recovered

The simulate fail of sdio is not a real sdio transter fail, it only
set an error status in mmc_should_fail_request after the transfer end,
actually the transfer is success, then sdio_io_rw_ext_helper will
return error status and stop transfer the left data. For example,
the really RX len is 286 bytes, then it will split to 2 blocks in
sdio_io_rw_ext_helper, one is 256 bytes, left is 30 bytes, if the
first 256 bytes get an error status by mmc_should_fail_request,then
the left 30 bytes will not read in this RX operation. Then when the
next RX arrive, the left 30 bytes will be considered as the header
of the read, the top 4 bytes of the 30 bytes will be considered as
lookaheads, but actually the 4 bytes is not the lookaheads, so the len
from this lookaheads is not correct, it exceeds max htc length 4088
sometimes. When happened exceeds, the buffer chain is not matched between
firmware and ath10k, then it need to start recovery ASAP. Recently then
recovery will be started by wmi command timeout, but it will be long time
later, for example, it is 60+ seconds later from the periodic scan, if
it does not have periodic scan, it will be longer.

Start recovery when it happened "payload length exceeds max htc length"
will be reasonable.

This patch only effect sdio chips.

Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00029.

Signed-off-by: Wen Gong 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/20200108031957.22308-3-wgong@codeaurora.org
Signed-off-by: Sasha Levin

p54: avoid accessing the data mapped to streaming DMA

2020-11-01T11:01:05+00:00

commit 478762855b5ae9f68fa6ead1edf7abada70fcd5f upstream.

In p54p_tx(), skb->data is mapped to streaming DMA on line 337:
  mapping = pci_map_single(..., skb->data, ...);

Then skb->data is accessed on line 349:
  desc->device_addr = ((struct p54_hdr *)skb->data)->req_id;

This access may cause data inconsistency between CPU cache and hardware.

To fix this problem, ((struct p54_hdr *)skb->data)->req_id is stored in
a local variable before DMA mapping, and then the driver accesses this
local variable instead of skb->data.

Cc: 
Signed-off-by: Jia-Ju Bai 
Acked-by: Christian Lamparter 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/20200802132949.26788-1-baijiaju@tsinghua.edu.cn
Signed-off-by: Greg Kroah-Hartman