linux-stable.git/drivers/net/wireless, branch v5.4.280

wifi: iwlwifi: mvm: don't read past the mfuart notifcation

2024-07-05T07:08:11+00:00

[ Upstream commit 4bb95f4535489ed830cf9b34b0a891e384d1aee4 ]

In case the firmware sends a notification that claims it has more data
than it has, we will read past that was allocated for the notification.
Remove the print of the buffer, we won't see it by default. If needed,
we can see the content with tracing.

This was reported by KFENCE.

Fixes: bdccdb854f2f ("iwlwifi: mvm: support MFUART dump in case of MFUART assert")
Signed-off-by: Emmanuel Grumbach 
Reviewed-by: Johannes Berg 
Signed-off-by: Miri Korenblit 
Link: https://msgid.link/20240513132416.ba82a01a559e.Ia91dd20f5e1ca1ad380b95e68aebf2794f553d9b@changeid
Signed-off-by: Johannes Berg 
Signed-off-by: Sasha Levin

wifi: iwlwifi: dbg_ini: move iwl_dbg_tlv_free outside of debugfs ifdef

2024-07-05T07:08:11+00:00

[ Upstream commit 87821b67dea87addbc4ab093ba752753b002176a ]

The driver should call iwl_dbg_tlv_free even if debugfs is not defined
since ini mode does not depend on debugfs ifdef.

Fixes: 68f6f492c4fa ("iwlwifi: trans: support loading ini TLVs from external file")
Signed-off-by: Shahar S Matityahu 
Reviewed-by: Luciano Coelho 
Signed-off-by: Miri Korenblit 
Link: https://msgid.link/20240510170500.c8e3723f55b0.I5e805732b0be31ee6b83c642ec652a34e974ff10@changeid
Signed-off-by: Johannes Berg 
Signed-off-by: Sasha Levin

wifi: iwlwifi: mvm: revert gen2 TX A-MPDU size to 64

2024-07-05T07:08:10+00:00

[ Upstream commit 4a7aace2899711592327463c1a29ffee44fcc66e ]

We don't actually support >64 even for HE devices, so revert
back to 64. This fixes an issue where the session is refused
because the queue is configured differently from the actual
session later.

Fixes: 514c30696fbc ("iwlwifi: add support for IEEE802.11ax")
Signed-off-by: Johannes Berg 
Reviewed-by: Liad Kaufman 
Reviewed-by: Luciano Coelho 
Signed-off-by: Miri Korenblit 
Link: https://msgid.link/20240510170500.52f7b4cf83aa.If47e43adddf7fe250ed7f5571fbb35d8221c7c47@changeid
Signed-off-by: Johannes Berg 
Signed-off-by: Sasha Levin

wifi: rtl8xxxu: Fix the TX power of RTL8192CU, RTL8723AU

2024-06-16T11:28:50+00:00

commit 08b5d052d17a89bb8706b2888277d0b682dc1610 upstream.

Don't subtract 1 from the power index. This was added in commit
2fc0b8e5a17d ("rtl8xxxu: Add TX power base values for gen1 parts")
for unknown reasons. The vendor drivers don't do this.

Also correct the calculations of values written to
REG_OFDM0_X{C,D}_TX_IQ_IMBALANCE. According to the vendor driver,
these are used for TX power training.

With these changes rtl8xxxu sets the TX power of RTL8192CU the same
as the vendor driver.

None of this appears to have any effect on my RTL8192CU device.

Cc: stable@vger.kernel.org
Signed-off-by: Bitterblue Smith 
Reviewed-by: Ping-Ke Shih 
Signed-off-by: Ping-Ke Shih 
Link: https://msgid.link/6ae5945b-644e-45e4-a78f-4c7d9c987910@gmail.com
Signed-off-by: Greg Kroah-Hartman

wifi: mwl8k: initialize cmd->addr[] properly

2024-06-16T11:28:36+00:00

[ Upstream commit 1d60eabb82694e58543e2b6366dae3e7465892a5 ]

This loop is supposed to copy the mac address to cmd->addr but the
i++ increment is missing so it copies everything to cmd->addr[0] and
only the last address is recorded.

Fixes: 22bedad3ce11 ("net: convert multicast list to list_head")
Signed-off-by: Dan Carpenter 
Signed-off-by: Kalle Valo 
Link: https://msgid.link/b788be9a-15f5-4cca-a3fe-79df4c8ce7b2@moroto.mountain
Signed-off-by: Sasha Levin

wifi: ar5523: enable proper endpoint verification

2024-06-16T11:28:36+00:00

[ Upstream commit e120b6388d7d88635d67dcae6483f39c37111850 ]

Syzkaller reports [1] hitting a warning about an endpoint in use
not having an expected type to it.

Fix the issue by checking for the existence of all proper
endpoints with their according types intact.

Sadly, this patch has not been tested on real hardware.

[1] Syzkaller report:
------------[ cut here ]------------
usb 1-1: BOGUS urb xfer, pipe 3 != type 1
WARNING: CPU: 0 PID: 3643 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504
...
Call Trace:
 
 ar5523_cmd+0x41b/0x780 drivers/net/wireless/ath/ar5523/ar5523.c:275
 ar5523_cmd_read drivers/net/wireless/ath/ar5523/ar5523.c:302 [inline]
 ar5523_host_available drivers/net/wireless/ath/ar5523/ar5523.c:1376 [inline]
 ar5523_probe+0x14b0/0x1d10 drivers/net/wireless/ath/ar5523/ar5523.c:1655
 usb_probe_interface+0x30f/0x7f0 drivers/usb/core/driver.c:396
 call_driver_probe drivers/base/dd.c:560 [inline]
 really_probe+0x249/0xb90 drivers/base/dd.c:639
 __driver_probe_device+0x1df/0x4d0 drivers/base/dd.c:778
 driver_probe_device+0x4c/0x1a0 drivers/base/dd.c:808
 __device_attach_driver+0x1d4/0x2e0 drivers/base/dd.c:936
 bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:427
 __device_attach+0x1e4/0x530 drivers/base/dd.c:1008
 bus_probe_device+0x1e8/0x2a0 drivers/base/bus.c:487
 device_add+0xbd9/0x1e90 drivers/base/core.c:3517
 usb_set_configuration+0x101d/0x1900 drivers/usb/core/message.c:2170
 usb_generic_driver_probe+0xbe/0x100 drivers/usb/core/generic.c:238
 usb_probe_device+0xd8/0x2c0 drivers/usb/core/driver.c:293
 call_driver_probe drivers/base/dd.c:560 [inline]
 really_probe+0x249/0xb90 drivers/base/dd.c:639
 __driver_probe_device+0x1df/0x4d0 drivers/base/dd.c:778
 driver_probe_device+0x4c/0x1a0 drivers/base/dd.c:808
 __device_attach_driver+0x1d4/0x2e0 drivers/base/dd.c:936
 bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:427
 __device_attach+0x1e4/0x530 drivers/base/dd.c:1008
 bus_probe_device+0x1e8/0x2a0 drivers/base/bus.c:487
 device_add+0xbd9/0x1e90 drivers/base/core.c:3517
 usb_new_device.cold+0x685/0x10ad drivers/usb/core/hub.c:2573
 hub_port_connect drivers/usb/core/hub.c:5353 [inline]
 hub_port_connect_change drivers/usb/core/hub.c:5497 [inline]
 port_event drivers/usb/core/hub.c:5653 [inline]
 hub_event+0x26cb/0x45d0 drivers/usb/core/hub.c:5735
 process_one_work+0x9bf/0x1710 kernel/workqueue.c:2289
 worker_thread+0x669/0x1090 kernel/workqueue.c:2436
 kthread+0x2e8/0x3a0 kernel/kthread.c:376
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306
 

Reported-and-tested-by: syzbot+1bc2c2afd44f820a669f@syzkaller.appspotmail.com
Fixes: b7d572e1871d ("ar5523: Add new driver")
Signed-off-by: Nikita Zhandarovich 
Signed-off-by: Kalle Valo 
Link: https://msgid.link/20240408121425.29392-1-n.zhandarovich@fintech.ru
Signed-off-by: Sasha Levin

wifi: carl9170: add a proper sanity check for endpoints

2024-06-16T11:28:36+00:00

[ Upstream commit b6dd09b3dac89b45d1ea3e3bd035a3859c0369a0 ]

Syzkaller reports [1] hitting a warning which is caused by presence
of a wrong endpoint type at the URB sumbitting stage. While there
was a check for a specific 4th endpoint, since it can switch types
between bulk and interrupt, other endpoints are trusted implicitly.
Similar warning is triggered in a couple of other syzbot issues [2].

Fix the issue by doing a comprehensive check of all endpoints
taking into account difference between high- and full-speed
configuration.

[1] Syzkaller report:
...
WARNING: CPU: 0 PID: 4721 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504
...
Call Trace:
 
 carl9170_usb_send_rx_irq_urb+0x273/0x340 drivers/net/wireless/ath/carl9170/usb.c:504
 carl9170_usb_init_device drivers/net/wireless/ath/carl9170/usb.c:939 [inline]
 carl9170_usb_firmware_finish drivers/net/wireless/ath/carl9170/usb.c:999 [inline]
 carl9170_usb_firmware_step2+0x175/0x240 drivers/net/wireless/ath/carl9170/usb.c:1028
 request_firmware_work_func+0x130/0x240 drivers/base/firmware_loader/main.c:1107
 process_one_work+0x9bf/0x1710 kernel/workqueue.c:2289
 worker_thread+0x669/0x1090 kernel/workqueue.c:2436
 kthread+0x2e8/0x3a0 kernel/kthread.c:376
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308
 

[2] Related syzkaller crashes:
Link: https://syzkaller.appspot.com/bug?extid=e394db78ae0b0032cb4d
Link: https://syzkaller.appspot.com/bug?extid=9468df99cb63a4a4c4e1

Reported-and-tested-by: syzbot+0ae4804973be759fa420@syzkaller.appspotmail.com
Fixes: a84fab3cbfdc ("carl9170: 802.11 rx/tx processing and usb backend")
Signed-off-by: Nikita Zhandarovich 
Acked-By: Christian Lamparter 
Signed-off-by: Kalle Valo 
Link: https://msgid.link/20240422183355.3785-1-n.zhandarovich@fintech.ru
Signed-off-by: Sasha Levin

wifi: ath10k: populate board data for WCN3990

2024-06-16T11:28:35+00:00

[ Upstream commit f1f1b5b055c9f27a2f90fd0f0521f5920e9b3c18 ]

Specify board data size (and board.bin filename) for the WCN3990
platform.

Reported-by: Yongqin Liu 
Fixes: 03a72288c546 ("ath10k: wmi: add hw params entry for wcn3990")
Signed-off-by: Dmitry Baryshkov 
Signed-off-by: Kalle Valo 
Link: https://msgid.link/20240130-wcn3990-board-fw-v1-1-738f7c19a8c8@linaro.org
Signed-off-by: Sasha Levin

wifi: ath10k: Fix an error code problem in ath10k_dbg_sta_write_peer_debug_trigger()

2024-06-16T11:28:35+00:00

[ Upstream commit c511a9c12674d246916bb16c479d496b76983193 ]

Clang Static Checker (scan-build) warns:

drivers/net/wireless/ath/ath10k/debugfs_sta.c:line 429, column 3
Value stored to 'ret' is never read.

Return 'ret' rather than 'count' when 'ret' stores an error code.

Fixes: ee8b08a1be82 ("ath10k: add debugfs support to get per peer tids log via tracing")
Signed-off-by: Su Hui 
Acked-by: Jeff Johnson 
Signed-off-by: Kalle Valo 
Link: https://msgid.link/20240422034243.938962-1-suhui@nfschina.com
Signed-off-by: Sasha Levin

wifi: ath10k: poll service ready message before failing

2024-06-16T11:28:33+00:00

[ Upstream commit e57b7d62a1b2f496caf0beba81cec3c90fad80d5 ]

Currently host relies on CE interrupts to get notified that
the service ready message is ready. This results in timeout
issue if the interrupt is not fired, due to some unknown
reasons. See below logs:

[76321.937866] ath10k_pci 0000:02:00.0: wmi service ready event not received
...
[76322.016738] ath10k_pci 0000:02:00.0: Could not init core: -110

And finally it causes WLAN interface bring up failure.

Change to give it one more chance here by polling CE rings,
before failing directly.

Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00157-QCARMSWPZ-1

Fixes: 5e3dd157d7e7 ("ath10k: mac80211 driver for Qualcomm Atheros 802.11ac CQA98xx devices")
Reported-by: James Prestwood 
Tested-By: James Prestwood  # on QCA6174 hw3.2
Link: https://lore.kernel.org/linux-wireless/304ce305-fbe6-420e-ac2a-d61ae5e6ca1a@gmail.com/
Signed-off-by: Baochen Qiang 
Acked-by: Jeff Johnson 
Signed-off-by: Kalle Valo 
Link: https://msgid.link/20240227030409.89702-1-quic_bqiang@quicinc.com
Signed-off-by: Sasha Levin