linux-stable.git/drivers/net/wireless, branch v5.4.239 Linux kernel stable tree wifi: ath9k: use proper statements in conditionals 2023-03-11T15:44:07+00:00 Arnd Bergmann arnd@arndb.de 2022-12-15T16:55:42+00:00 68b0cdcfa135e3b56ded3f6298b94b7cff70bf17 commit b7dc753fe33a707379e2254317794a4dad6c0fe2 upstream. A previous cleanup patch accidentally broke some conditional expressions by replacing the safe "do {} while (0)" constructs with empty macros. gcc points this out when extra warnings are enabled: drivers/net/wireless/ath/ath9k/hif_usb.c: In function 'ath9k_skb_queue_complete': drivers/net/wireless/ath/ath9k/hif_usb.c:251:57: error: suggest braces around empty body in an 'else' statement [-Werror=empty-body] 251 | TX_STAT_INC(hif_dev, skb_failed); Make both sets of macros proper expressions again. Fixes: d7fc76039b74 ("ath9k: htc: clean up statistics macros") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221215165553.1950307-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b7dc753fe33a707379e2254317794a4dad6c0fe2 upstream.

A previous cleanup patch accidentally broke some conditional
expressions by replacing the safe "do {} while (0)" constructs
with empty macros. gcc points this out when extra warnings
are enabled:

drivers/net/wireless/ath/ath9k/hif_usb.c: In function 'ath9k_skb_queue_complete':
drivers/net/wireless/ath/ath9k/hif_usb.c:251:57: error: suggest braces around empty body in an 'else' statement [-Werror=empty-body]
  251 |                         TX_STAT_INC(hif_dev, skb_failed);

Make both sets of macros proper expressions again.

Fixes: d7fc76039b74 ("ath9k: htc: clean up statistics macros")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221215165553.1950307-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
wifi: rtl8xxxu: Use a longer retry limit of 48 2023-03-11T15:44:03+00:00 Bitterblue Smith rtl8821cerfe2@gmail.com 2023-01-08T15:08:16+00:00 342cb34c5285a14cfdc366511c668cda9a4b284b commit 2a86aa9a1892d60ef2e3f310f5b42b8b05546d65 upstream. The Realtek rate control algorithm goes back and forth a lot between the highest and the lowest rate it's allowed to use. This is due to a lot of frames being dropped because the retry limits set by IEEE80211_CONF_CHANGE_RETRY_LIMITS are too low. (Experimentally, they are 4 for long frames and 7 for short frames.) The vendor drivers hardcode the value 48 for both retry limits (for station mode), which makes dropped frames very rare and thus the rate control is more stable. Because most Realtek chips handle the rate control in the firmware, which can't be modified, ignore the limits set by IEEE80211_CONF_CHANGE_RETRY_LIMITS and use the value 48 (set during chip initialisation), same as the vendor drivers. Cc: stable@vger.kernel.org Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/477d745b-6bac-111d-403c-487fc19aa30d@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 2a86aa9a1892d60ef2e3f310f5b42b8b05546d65 upstream.

The Realtek rate control algorithm goes back and forth a lot between
the highest and the lowest rate it's allowed to use. This is due to
a lot of frames being dropped because the retry limits set by
IEEE80211_CONF_CHANGE_RETRY_LIMITS are too low. (Experimentally, they
are 4 for long frames and 7 for short frames.)

The vendor drivers hardcode the value 48 for both retry limits (for
station mode), which makes dropped frames very rare and thus the rate
control is more stable.

Because most Realtek chips handle the rate control in the firmware,
which can't be modified, ignore the limits set by
IEEE80211_CONF_CHANGE_RETRY_LIMITS and use the value 48 (set during
chip initialisation), same as the vendor drivers.

Cc: stable@vger.kernel.org
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/477d745b-6bac-111d-403c-487fc19aa30d@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
wifi: rtl8xxxu: fixing transmisison failure for rtl8192eu 2023-03-11T15:43:58+00:00 Jun ASAKA JunASAKA@zzy040330.moe 2022-12-17T03:06:59+00:00 791402dd051457f68ad9859affc1940442feb8bd commit c6015bf3ff1ffb3caa27eb913797438a0fc634a0 upstream. Fixing transmission failure which results in "authentication with ... timed out". This can be fixed by disable the REG_TXPAUSE. Signed-off-by: Jun ASAKA <JunASAKA@zzy040330.moe> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221217030659.12577-1-JunASAKA@zzy040330.moe Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit c6015bf3ff1ffb3caa27eb913797438a0fc634a0 upstream.

Fixing transmission failure which results in
"authentication with ... timed out". This can be
fixed by disable the REG_TXPAUSE.

Signed-off-by: Jun ASAKA <JunASAKA@zzy040330.moe>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221217030659.12577-1-JunASAKA@zzy040330.moe
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
wifi: mt76: dma: free rx_head in mt76_dma_rx_cleanup 2023-03-11T15:43:55+00:00 Lorenzo Bianconi lorenzo@kernel.org 2023-01-01T11:47:57+00:00 c727c1eb58e03660b66578d05b334f64b62eb79b [ Upstream commit 1b88b47e898edef0e56e3a2f4e49f052a136153d ] Free rx_head skb in mt76_dma_rx_cleanup routine in order to avoid possible memory leak at module unload. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 1b88b47e898edef0e56e3a2f4e49f052a136153d ]

Free rx_head skb in mt76_dma_rx_cleanup routine in order to avoid
possible memory leak at module unload.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
wifi: mt7601u: fix an integer underflow 2023-03-11T15:43:55+00:00 Jisoo Jang jisoo.jang@yonsei.ac.kr 2022-12-29T09:29:06+00:00 67e4519afba215199b6dfa39ce5d7ea673ee4138 [ Upstream commit 803f3176c5df3b5582c27ea690f204abb60b19b9 ] Fix an integer underflow that leads to a null pointer dereference in 'mt7601u_rx_skb_from_seg()'. The variable 'dma_len' in the URB packet could be manipulated, which could trigger an integer underflow of 'seg_len' in 'mt7601u_rx_process_seg()'. This underflow subsequently causes the 'bad_frame' checks in 'mt7601u_rx_skb_from_seg()' to be bypassed, eventually leading to a dereference of the pointer 'p', which is a null pointer. Ensure that 'dma_len' is greater than 'min_seg_len'. Found by a modified version of syzkaller. KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 0 PID: 12 Comm: ksoftirqd/0 Tainted: G W O 5.14.0+ #139 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 RIP: 0010:skb_add_rx_frag+0x143/0x370 Code: e2 07 83 c2 03 38 ca 7c 08 84 c9 0f 85 86 01 00 00 4c 8d 7d 08 44 89 68 08 48 b8 00 00 00 00 00 fc ff df 4c 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 cd 01 00 00 48 8b 45 08 a8 01 0f 85 3d 01 00 00 RSP: 0018:ffffc900000cfc90 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffff888115520dc0 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffff8881118430c0 RDI: ffff8881118430f8 RBP: 0000000000000000 R08: 0000000000000e09 R09: 0000000000000010 R10: ffff888111843017 R11: ffffed1022308602 R12: 0000000000000000 R13: 0000000000000e09 R14: 0000000000000010 R15: 0000000000000008 FS: 0000000000000000(0000) GS:ffff88811a800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000004035af40 CR3: 00000001157f2000 CR4: 0000000000750ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: mt7601u_rx_tasklet+0xc73/0x1270 ? mt7601u_submit_rx_buf.isra.0+0x510/0x510 ? tasklet_action_common.isra.0+0x79/0x2f0 tasklet_action_common.isra.0+0x206/0x2f0 __do_softirq+0x1b5/0x880 ? tasklet_unlock+0x30/0x30 run_ksoftirqd+0x26/0x50 smpboot_thread_fn+0x34f/0x7d0 ? smpboot_register_percpu_thread+0x370/0x370 kthread+0x3a1/0x480 ? set_kthread_struct+0x120/0x120 ret_from_fork+0x1f/0x30 Modules linked in: 88XXau(O) 88x2bu(O) ---[ end trace 57f34f93b4da0f9b ]--- RIP: 0010:skb_add_rx_frag+0x143/0x370 Code: e2 07 83 c2 03 38 ca 7c 08 84 c9 0f 85 86 01 00 00 4c 8d 7d 08 44 89 68 08 48 b8 00 00 00 00 00 fc ff df 4c 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 cd 01 00 00 48 8b 45 08 a8 01 0f 85 3d 01 00 00 RSP: 0018:ffffc900000cfc90 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffff888115520dc0 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffff8881118430c0 RDI: ffff8881118430f8 RBP: 0000000000000000 R08: 0000000000000e09 R09: 0000000000000010 R10: ffff888111843017 R11: ffffed1022308602 R12: 0000000000000000 R13: 0000000000000e09 R14: 0000000000000010 R15: 0000000000000008 FS: 0000000000000000(0000) GS:ffff88811a800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000004035af40 CR3: 00000001157f2000 CR4: 0000000000750ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Signed-off-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221229092906.2328282-1-jisoo.jang@yonsei.ac.kr Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 803f3176c5df3b5582c27ea690f204abb60b19b9 ]

Fix an integer underflow that leads to a null pointer dereference in
'mt7601u_rx_skb_from_seg()'. The variable 'dma_len' in the URB packet
could be manipulated, which could trigger an integer underflow of
'seg_len' in 'mt7601u_rx_process_seg()'. This underflow subsequently
causes the 'bad_frame' checks in 'mt7601u_rx_skb_from_seg()' to be
bypassed, eventually leading to a dereference of the pointer 'p', which
is a null pointer.

Ensure that 'dma_len' is greater than 'min_seg_len'.

Found by a modified version of syzkaller.

KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 0 PID: 12 Comm: ksoftirqd/0 Tainted: G        W  O      5.14.0+
#139
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
RIP: 0010:skb_add_rx_frag+0x143/0x370
Code: e2 07 83 c2 03 38 ca 7c 08 84 c9 0f 85 86 01 00 00 4c 8d 7d 08 44
89 68 08 48 b8 00 00 00 00 00 fc ff df 4c 89 fa 48 c1 ea 03 <80> 3c 02
00 0f 85 cd 01 00 00 48 8b 45 08 a8 01 0f 85 3d 01 00 00
RSP: 0018:ffffc900000cfc90 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: ffff888115520dc0 RCX: 0000000000000000
RDX: 0000000000000001 RSI: ffff8881118430c0 RDI: ffff8881118430f8
RBP: 0000000000000000 R08: 0000000000000e09 R09: 0000000000000010
R10: ffff888111843017 R11: ffffed1022308602 R12: 0000000000000000
R13: 0000000000000e09 R14: 0000000000000010 R15: 0000000000000008
FS:  0000000000000000(0000) GS:ffff88811a800000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000004035af40 CR3: 00000001157f2000 CR4: 0000000000750ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
 mt7601u_rx_tasklet+0xc73/0x1270
 ? mt7601u_submit_rx_buf.isra.0+0x510/0x510
 ? tasklet_action_common.isra.0+0x79/0x2f0
 tasklet_action_common.isra.0+0x206/0x2f0
 __do_softirq+0x1b5/0x880
 ? tasklet_unlock+0x30/0x30
 run_ksoftirqd+0x26/0x50
 smpboot_thread_fn+0x34f/0x7d0
 ? smpboot_register_percpu_thread+0x370/0x370
 kthread+0x3a1/0x480
 ? set_kthread_struct+0x120/0x120
 ret_from_fork+0x1f/0x30
Modules linked in: 88XXau(O) 88x2bu(O)
---[ end trace 57f34f93b4da0f9b ]---
RIP: 0010:skb_add_rx_frag+0x143/0x370
Code: e2 07 83 c2 03 38 ca 7c 08 84 c9 0f 85 86 01 00 00 4c 8d 7d 08 44
89 68 08 48 b8 00 00 00 00 00 fc ff df 4c 89 fa 48 c1 ea 03 <80> 3c 02
00 0f 85 cd 01 00 00 48 8b 45 08 a8 01 0f 85 3d 01 00 00
RSP: 0018:ffffc900000cfc90 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: ffff888115520dc0 RCX: 0000000000000000
RDX: 0000000000000001 RSI: ffff8881118430c0 RDI: ffff8881118430f8
RBP: 0000000000000000 R08: 0000000000000e09 R09: 0000000000000010
R10: ffff888111843017 R11: ffffed1022308602 R12: 0000000000000000
R13: 0000000000000e09 R14: 0000000000000010 R15: 0000000000000008
FS:  0000000000000000(0000) GS:ffff88811a800000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000004035af40 CR3: 00000001157f2000 CR4: 0000000000750ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554

Signed-off-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221229092906.2328282-1-jisoo.jang@yonsei.ac.kr
Signed-off-by: Sasha Levin <sashal@kernel.org>
wifi: brcmfmac: ensure CLM version is null-terminated to prevent stack-out-of-bounds 2023-03-11T15:43:55+00:00 Jisoo Jang jisoo.jang@yonsei.ac.kr 2022-12-30T07:51:39+00:00 423a1297ea72bbddf64dbb0957f2879c0f2aa5d0 [ Upstream commit 660145d708be52f946a82e5b633c020f58f996de ] Fix a stack-out-of-bounds read in brcmfmac that occurs when 'buf' that is not null-terminated is passed as an argument of strreplace() in brcmf_c_preinit_dcmds(). This buffer is filled with a CLM version string by memcpy() in brcmf_fil_iovar_data_get(). Ensure buf is null-terminated. Found by a modified version of syzkaller. [ 33.004414][ T1896] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available [ 33.013486][ T1896] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43236/3 wl0: Nov 30 2011 17:33:42 version 5.90.188.22 [ 33.021554][ T1896] ================================================================== [ 33.022379][ T1896] BUG: KASAN: stack-out-of-bounds in strreplace+0xf2/0x110 [ 33.023122][ T1896] Read of size 1 at addr ffffc90001d6efc8 by task kworker/0:2/1896 [ 33.023852][ T1896] [ 33.024096][ T1896] CPU: 0 PID: 1896 Comm: kworker/0:2 Tainted: G O 5.14.0+ #132 [ 33.024927][ T1896] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 [ 33.026065][ T1896] Workqueue: usb_hub_wq hub_event [ 33.026581][ T1896] Call Trace: [ 33.026896][ T1896] dump_stack_lvl+0x57/0x7d [ 33.027372][ T1896] print_address_description.constprop.0.cold+0xf/0x334 [ 33.028037][ T1896] ? strreplace+0xf2/0x110 [ 33.028403][ T1896] ? strreplace+0xf2/0x110 [ 33.028807][ T1896] kasan_report.cold+0x83/0xdf [ 33.029283][ T1896] ? strreplace+0xf2/0x110 [ 33.029666][ T1896] strreplace+0xf2/0x110 [ 33.029966][ T1896] brcmf_c_preinit_dcmds+0xab1/0xc40 [ 33.030351][ T1896] ? brcmf_c_set_joinpref_default+0x100/0x100 [ 33.030787][ T1896] ? rcu_read_lock_sched_held+0xa1/0xd0 [ 33.031223][ T1896] ? rcu_read_lock_bh_held+0xb0/0xb0 [ 33.031661][ T1896] ? lock_acquire+0x19d/0x4e0 [ 33.032091][ T1896] ? find_held_lock+0x2d/0x110 [ 33.032605][ T1896] ? brcmf_usb_deq+0x1a7/0x260 [ 33.033087][ T1896] ? brcmf_usb_rx_fill_all+0x5a/0xf0 [ 33.033582][ T1896] brcmf_attach+0x246/0xd40 [ 33.034022][ T1896] ? wiphy_new_nm+0x1476/0x1d50 [ 33.034383][ T1896] ? kmemdup+0x30/0x40 [ 33.034722][ T1896] brcmf_usb_probe+0x12de/0x1690 [ 33.035223][ T1896] ? brcmf_usbdev_qinit.constprop.0+0x470/0x470 [ 33.035833][ T1896] usb_probe_interface+0x25f/0x710 [ 33.036315][ T1896] really_probe+0x1be/0xa90 [ 33.036656][ T1896] __driver_probe_device+0x2ab/0x460 [ 33.037026][ T1896] ? usb_match_id.part.0+0x88/0xc0 [ 33.037383][ T1896] driver_probe_device+0x49/0x120 [ 33.037790][ T1896] __device_attach_driver+0x18a/0x250 [ 33.038300][ T1896] ? driver_allows_async_probing+0x120/0x120 [ 33.038986][ T1896] bus_for_each_drv+0x123/0x1a0 [ 33.039906][ T1896] ? bus_rescan_devices+0x20/0x20 [ 33.041412][ T1896] ? lockdep_hardirqs_on_prepare+0x273/0x3e0 [ 33.041861][ T1896] ? trace_hardirqs_on+0x1c/0x120 [ 33.042330][ T1896] __device_attach+0x207/0x330 [ 33.042664][ T1896] ? device_bind_driver+0xb0/0xb0 [ 33.043026][ T1896] ? kobject_uevent_env+0x230/0x12c0 [ 33.043515][ T1896] bus_probe_device+0x1a2/0x260 [ 33.043914][ T1896] device_add+0xa61/0x1ce0 [ 33.044227][ T1896] ? __mutex_unlock_slowpath+0xe7/0x660 [ 33.044891][ T1896] ? __fw_devlink_link_to_suppliers+0x550/0x550 [ 33.045531][ T1896] usb_set_configuration+0x984/0x1770 [ 33.046051][ T1896] ? kernfs_create_link+0x175/0x230 [ 33.046548][ T1896] usb_generic_driver_probe+0x69/0x90 [ 33.046931][ T1896] usb_probe_device+0x9c/0x220 [ 33.047434][ T1896] really_probe+0x1be/0xa90 [ 33.047760][ T1896] __driver_probe_device+0x2ab/0x460 [ 33.048134][ T1896] driver_probe_device+0x49/0x120 [ 33.048516][ T1896] __device_attach_driver+0x18a/0x250 [ 33.048910][ T1896] ? driver_allows_async_probing+0x120/0x120 [ 33.049437][ T1896] bus_for_each_drv+0x123/0x1a0 [ 33.049814][ T1896] ? bus_rescan_devices+0x20/0x20 [ 33.050164][ T1896] ? lockdep_hardirqs_on_prepare+0x273/0x3e0 [ 33.050579][ T1896] ? trace_hardirqs_on+0x1c/0x120 [ 33.050936][ T1896] __device_attach+0x207/0x330 [ 33.051399][ T1896] ? device_bind_driver+0xb0/0xb0 [ 33.051888][ T1896] ? kobject_uevent_env+0x230/0x12c0 [ 33.052314][ T1896] bus_probe_device+0x1a2/0x260 [ 33.052688][ T1896] device_add+0xa61/0x1ce0 [ 33.053121][ T1896] ? __fw_devlink_link_to_suppliers+0x550/0x550 [ 33.053568][ T1896] usb_new_device.cold+0x463/0xf66 [ 33.053953][ T1896] ? hub_disconnect+0x400/0x400 [ 33.054313][ T1896] ? rwlock_bug.part.0+0x90/0x90 [ 33.054661][ T1896] ? lockdep_hardirqs_on_prepare+0x273/0x3e0 [ 33.055094][ T1896] hub_event+0x10d5/0x3330 [ 33.055530][ T1896] ? hub_port_debounce+0x280/0x280 [ 33.055934][ T1896] ? __lock_acquire+0x1671/0x5790 [ 33.056387][ T1896] ? wq_calc_node_cpumask+0x170/0x2a0 [ 33.056924][ T1896] ? lock_release+0x640/0x640 [ 33.057383][ T1896] ? rcu_read_lock_sched_held+0xa1/0xd0 [ 33.057916][ T1896] ? rcu_read_lock_bh_held+0xb0/0xb0 [ 33.058402][ T1896] ? lockdep_hardirqs_on_prepare+0x273/0x3e0 [ 33.059019][ T1896] process_one_work+0x873/0x13e0 [ 33.059488][ T1896] ? lock_release+0x640/0x640 [ 33.059932][ T1896] ? pwq_dec_nr_in_flight+0x320/0x320 [ 33.060446][ T1896] ? rwlock_bug.part.0+0x90/0x90 [ 33.060898][ T1896] worker_thread+0x8b/0xd10 [ 33.061348][ T1896] ? __kthread_parkme+0xd9/0x1d0 [ 33.061810][ T1896] ? process_one_work+0x13e0/0x13e0 [ 33.062288][ T1896] kthread+0x379/0x450 [ 33.062660][ T1896] ? _raw_spin_unlock_irq+0x24/0x30 [ 33.063148][ T1896] ? set_kthread_struct+0x100/0x100 [ 33.063606][ T1896] ret_from_fork+0x1f/0x30 [ 33.064070][ T1896] [ 33.064313][ T1896] [ 33.064545][ T1896] addr ffffc90001d6efc8 is located in stack of task kworker/0:2/1896 at offset 512 in frame: [ 33.065478][ T1896] brcmf_c_preinit_dcmds+0x0/0xc40 [ 33.065973][ T1896] [ 33.066191][ T1896] this frame has 4 objects: [ 33.066614][ T1896] [48, 56) 'ptr' [ 33.066618][ T1896] [80, 148) 'revinfo' [ 33.066957][ T1896] [192, 210) 'eventmask' [ 33.067338][ T1896] [256, 512) 'buf' [ 33.067742][ T1896] [ 33.068304][ T1896] Memory state around the buggy address: [ 33.068838][ T1896] ffffc90001d6ee80: f2 00 00 02 f2 f2 f2 f2 f2 00 00 00 00 00 00 00 [ 33.069545][ T1896] ffffc90001d6ef00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 33.070626][ T1896] >ffffc90001d6ef80: 00 00 00 00 00 00 00 00 00 f3 f3 f3 f3 f3 f3 f3 [ 33.072052][ T1896] ^ [ 33.073043][ T1896] ffffc90001d6f000: f3 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 33.074230][ T1896] ffffc90001d6f080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 33.074914][ T1896] ================================================================== [ 33.075713][ T1896] Disabling lock debugging due to kernel taint Reviewed-by: Arend van Spriel<arend.vanspriel@broadcom.com> Signed-off-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221230075139.56591-1-jisoo.jang@yonsei.ac.kr Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 660145d708be52f946a82e5b633c020f58f996de ]

Fix a stack-out-of-bounds read in brcmfmac that occurs
when 'buf' that is not null-terminated is passed as an argument of
strreplace() in brcmf_c_preinit_dcmds(). This buffer is filled with
a CLM version string by memcpy() in brcmf_fil_iovar_data_get().
Ensure buf is null-terminated.

Found by a modified version of syzkaller.

[   33.004414][ T1896] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
[   33.013486][ T1896] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43236/3 wl0: Nov 30 2011 17:33:42 version 5.90.188.22
[   33.021554][ T1896] ==================================================================
[   33.022379][ T1896] BUG: KASAN: stack-out-of-bounds in strreplace+0xf2/0x110
[   33.023122][ T1896] Read of size 1 at addr ffffc90001d6efc8 by task kworker/0:2/1896
[   33.023852][ T1896]
[   33.024096][ T1896] CPU: 0 PID: 1896 Comm: kworker/0:2 Tainted: G           O      5.14.0+ #132
[   33.024927][ T1896] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
[   33.026065][ T1896] Workqueue: usb_hub_wq hub_event
[   33.026581][ T1896] Call Trace:
[   33.026896][ T1896]  dump_stack_lvl+0x57/0x7d
[   33.027372][ T1896]  print_address_description.constprop.0.cold+0xf/0x334
[   33.028037][ T1896]  ? strreplace+0xf2/0x110
[   33.028403][ T1896]  ? strreplace+0xf2/0x110
[   33.028807][ T1896]  kasan_report.cold+0x83/0xdf
[   33.029283][ T1896]  ? strreplace+0xf2/0x110
[   33.029666][ T1896]  strreplace+0xf2/0x110
[   33.029966][ T1896]  brcmf_c_preinit_dcmds+0xab1/0xc40
[   33.030351][ T1896]  ? brcmf_c_set_joinpref_default+0x100/0x100
[   33.030787][ T1896]  ? rcu_read_lock_sched_held+0xa1/0xd0
[   33.031223][ T1896]  ? rcu_read_lock_bh_held+0xb0/0xb0
[   33.031661][ T1896]  ? lock_acquire+0x19d/0x4e0
[   33.032091][ T1896]  ? find_held_lock+0x2d/0x110
[   33.032605][ T1896]  ? brcmf_usb_deq+0x1a7/0x260
[   33.033087][ T1896]  ? brcmf_usb_rx_fill_all+0x5a/0xf0
[   33.033582][ T1896]  brcmf_attach+0x246/0xd40
[   33.034022][ T1896]  ? wiphy_new_nm+0x1476/0x1d50
[   33.034383][ T1896]  ? kmemdup+0x30/0x40
[   33.034722][ T1896]  brcmf_usb_probe+0x12de/0x1690
[   33.035223][ T1896]  ? brcmf_usbdev_qinit.constprop.0+0x470/0x470
[   33.035833][ T1896]  usb_probe_interface+0x25f/0x710
[   33.036315][ T1896]  really_probe+0x1be/0xa90
[   33.036656][ T1896]  __driver_probe_device+0x2ab/0x460
[   33.037026][ T1896]  ? usb_match_id.part.0+0x88/0xc0
[   33.037383][ T1896]  driver_probe_device+0x49/0x120
[   33.037790][ T1896]  __device_attach_driver+0x18a/0x250
[   33.038300][ T1896]  ? driver_allows_async_probing+0x120/0x120
[   33.038986][ T1896]  bus_for_each_drv+0x123/0x1a0
[   33.039906][ T1896]  ? bus_rescan_devices+0x20/0x20
[   33.041412][ T1896]  ? lockdep_hardirqs_on_prepare+0x273/0x3e0
[   33.041861][ T1896]  ? trace_hardirqs_on+0x1c/0x120
[   33.042330][ T1896]  __device_attach+0x207/0x330
[   33.042664][ T1896]  ? device_bind_driver+0xb0/0xb0
[   33.043026][ T1896]  ? kobject_uevent_env+0x230/0x12c0
[   33.043515][ T1896]  bus_probe_device+0x1a2/0x260
[   33.043914][ T1896]  device_add+0xa61/0x1ce0
[   33.044227][ T1896]  ? __mutex_unlock_slowpath+0xe7/0x660
[   33.044891][ T1896]  ? __fw_devlink_link_to_suppliers+0x550/0x550
[   33.045531][ T1896]  usb_set_configuration+0x984/0x1770
[   33.046051][ T1896]  ? kernfs_create_link+0x175/0x230
[   33.046548][ T1896]  usb_generic_driver_probe+0x69/0x90
[   33.046931][ T1896]  usb_probe_device+0x9c/0x220
[   33.047434][ T1896]  really_probe+0x1be/0xa90
[   33.047760][ T1896]  __driver_probe_device+0x2ab/0x460
[   33.048134][ T1896]  driver_probe_device+0x49/0x120
[   33.048516][ T1896]  __device_attach_driver+0x18a/0x250
[   33.048910][ T1896]  ? driver_allows_async_probing+0x120/0x120
[   33.049437][ T1896]  bus_for_each_drv+0x123/0x1a0
[   33.049814][ T1896]  ? bus_rescan_devices+0x20/0x20
[   33.050164][ T1896]  ? lockdep_hardirqs_on_prepare+0x273/0x3e0
[   33.050579][ T1896]  ? trace_hardirqs_on+0x1c/0x120
[   33.050936][ T1896]  __device_attach+0x207/0x330
[   33.051399][ T1896]  ? device_bind_driver+0xb0/0xb0
[   33.051888][ T1896]  ? kobject_uevent_env+0x230/0x12c0
[   33.052314][ T1896]  bus_probe_device+0x1a2/0x260
[   33.052688][ T1896]  device_add+0xa61/0x1ce0
[   33.053121][ T1896]  ? __fw_devlink_link_to_suppliers+0x550/0x550
[   33.053568][ T1896]  usb_new_device.cold+0x463/0xf66
[   33.053953][ T1896]  ? hub_disconnect+0x400/0x400
[   33.054313][ T1896]  ? rwlock_bug.part.0+0x90/0x90
[   33.054661][ T1896]  ? lockdep_hardirqs_on_prepare+0x273/0x3e0
[   33.055094][ T1896]  hub_event+0x10d5/0x3330
[   33.055530][ T1896]  ? hub_port_debounce+0x280/0x280
[   33.055934][ T1896]  ? __lock_acquire+0x1671/0x5790
[   33.056387][ T1896]  ? wq_calc_node_cpumask+0x170/0x2a0
[   33.056924][ T1896]  ? lock_release+0x640/0x640
[   33.057383][ T1896]  ? rcu_read_lock_sched_held+0xa1/0xd0
[   33.057916][ T1896]  ? rcu_read_lock_bh_held+0xb0/0xb0
[   33.058402][ T1896]  ? lockdep_hardirqs_on_prepare+0x273/0x3e0
[   33.059019][ T1896]  process_one_work+0x873/0x13e0
[   33.059488][ T1896]  ? lock_release+0x640/0x640
[   33.059932][ T1896]  ? pwq_dec_nr_in_flight+0x320/0x320
[   33.060446][ T1896]  ? rwlock_bug.part.0+0x90/0x90
[   33.060898][ T1896]  worker_thread+0x8b/0xd10
[   33.061348][ T1896]  ? __kthread_parkme+0xd9/0x1d0
[   33.061810][ T1896]  ? process_one_work+0x13e0/0x13e0
[   33.062288][ T1896]  kthread+0x379/0x450
[   33.062660][ T1896]  ? _raw_spin_unlock_irq+0x24/0x30
[   33.063148][ T1896]  ? set_kthread_struct+0x100/0x100
[   33.063606][ T1896]  ret_from_fork+0x1f/0x30
[   33.064070][ T1896]
[   33.064313][ T1896]
[   33.064545][ T1896] addr ffffc90001d6efc8 is located in stack of task kworker/0:2/1896 at offset 512 in frame:
[   33.065478][ T1896]  brcmf_c_preinit_dcmds+0x0/0xc40
[   33.065973][ T1896]
[   33.066191][ T1896] this frame has 4 objects:
[   33.066614][ T1896]  [48, 56) 'ptr'
[   33.066618][ T1896]  [80, 148) 'revinfo'
[   33.066957][ T1896]  [192, 210) 'eventmask'
[   33.067338][ T1896]  [256, 512) 'buf'
[   33.067742][ T1896]
[   33.068304][ T1896] Memory state around the buggy address:
[   33.068838][ T1896]  ffffc90001d6ee80: f2 00 00 02 f2 f2 f2 f2 f2 00 00 00 00 00 00 00
[   33.069545][ T1896]  ffffc90001d6ef00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   33.070626][ T1896] >ffffc90001d6ef80: 00 00 00 00 00 00 00 00 00 f3 f3 f3 f3 f3 f3 f3
[   33.072052][ T1896]                                               ^
[   33.073043][ T1896]  ffffc90001d6f000: f3 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   33.074230][ T1896]  ffffc90001d6f080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   33.074914][ T1896] ==================================================================
[   33.075713][ T1896] Disabling lock debugging due to kernel taint

Reviewed-by: Arend van Spriel<arend.vanspriel@broadcom.com>
Signed-off-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221230075139.56591-1-jisoo.jang@yonsei.ac.kr
Signed-off-by: Sasha Levin <sashal@kernel.org>
wifi: brcmfmac: Fix potential stack-out-of-bounds in brcmf_c_preinit_dcmds() 2023-03-11T15:43:54+00:00 Jisoo Jang jisoo.jang@yonsei.ac.kr 2022-11-15T04:34:58+00:00 17dbe90e13f52848c460d253f15b765038ec6dc0 [ Upstream commit 0a06cadcc2a0044e4a117cc0e61436fc3a0dad69 ] This patch fixes a stack-out-of-bounds read in brcmfmac that occurs when 'buf' that is not null-terminated is passed as an argument of strsep() in brcmf_c_preinit_dcmds(). This buffer is filled with a firmware version string by memcpy() in brcmf_fil_iovar_data_get(). The patch ensures buf is null-terminated. Found by a modified version of syzkaller. [ 47.569679][ T1897] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43236b for chip BCM43236/3 [ 47.582839][ T1897] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available [ 47.601565][ T1897] ================================================================== [ 47.602574][ T1897] BUG: KASAN: stack-out-of-bounds in strsep+0x1b2/0x1f0 [ 47.603447][ T1897] Read of size 1 at addr ffffc90001f6f000 by task kworker/0:2/1897 [ 47.604336][ T1897] [ 47.604621][ T1897] CPU: 0 PID: 1897 Comm: kworker/0:2 Tainted: G O 5.14.0+ #131 [ 47.605617][ T1897] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 [ 47.606907][ T1897] Workqueue: usb_hub_wq hub_event [ 47.607453][ T1897] Call Trace: [ 47.607801][ T1897] dump_stack_lvl+0x8e/0xd1 [ 47.608295][ T1897] print_address_description.constprop.0.cold+0xf/0x334 [ 47.609009][ T1897] ? strsep+0x1b2/0x1f0 [ 47.609434][ T1897] ? strsep+0x1b2/0x1f0 [ 47.609863][ T1897] kasan_report.cold+0x83/0xdf [ 47.610366][ T1897] ? strsep+0x1b2/0x1f0 [ 47.610882][ T1897] strsep+0x1b2/0x1f0 [ 47.611300][ T1897] ? brcmf_fil_iovar_data_get+0x3a/0xf0 [ 47.611883][ T1897] brcmf_c_preinit_dcmds+0x995/0xc40 [ 47.612434][ T1897] ? brcmf_c_set_joinpref_default+0x100/0x100 [ 47.613078][ T1897] ? rcu_read_lock_sched_held+0xa1/0xd0 [ 47.613662][ T1897] ? rcu_read_lock_bh_held+0xb0/0xb0 [ 47.614208][ T1897] ? lock_acquire+0x19d/0x4e0 [ 47.614704][ T1897] ? find_held_lock+0x2d/0x110 [ 47.615236][ T1897] ? brcmf_usb_deq+0x1a7/0x260 [ 47.615741][ T1897] ? brcmf_usb_rx_fill_all+0x5a/0xf0 [ 47.616288][ T1897] brcmf_attach+0x246/0xd40 [ 47.616758][ T1897] ? wiphy_new_nm+0x1703/0x1dd0 [ 47.617280][ T1897] ? kmemdup+0x43/0x50 [ 47.617720][ T1897] brcmf_usb_probe+0x12de/0x1690 [ 47.618244][ T1897] ? brcmf_usbdev_qinit.constprop.0+0x470/0x470 [ 47.618901][ T1897] usb_probe_interface+0x2aa/0x760 [ 47.619429][ T1897] ? usb_probe_device+0x250/0x250 [ 47.619950][ T1897] really_probe+0x205/0xb70 [ 47.620435][ T1897] ? driver_allows_async_probing+0x130/0x130 [ 47.621048][ T1897] __driver_probe_device+0x311/0x4b0 [ 47.621595][ T1897] ? driver_allows_async_probing+0x130/0x130 [ 47.622209][ T1897] driver_probe_device+0x4e/0x150 [ 47.622739][ T1897] __device_attach_driver+0x1cc/0x2a0 [ 47.623287][ T1897] bus_for_each_drv+0x156/0x1d0 [ 47.623796][ T1897] ? bus_rescan_devices+0x30/0x30 [ 47.624309][ T1897] ? lockdep_hardirqs_on_prepare+0x273/0x3e0 [ 47.624907][ T1897] ? trace_hardirqs_on+0x46/0x160 [ 47.625437][ T1897] __device_attach+0x23f/0x3a0 [ 47.625924][ T1897] ? device_bind_driver+0xd0/0xd0 [ 47.626433][ T1897] ? kobject_uevent_env+0x287/0x14b0 [ 47.627057][ T1897] bus_probe_device+0x1da/0x290 [ 47.627557][ T1897] device_add+0xb7b/0x1eb0 [ 47.628027][ T1897] ? wait_for_completion+0x290/0x290 [ 47.628593][ T1897] ? __fw_devlink_link_to_suppliers+0x5a0/0x5a0 [ 47.629249][ T1897] usb_set_configuration+0xf59/0x16f0 [ 47.629829][ T1897] usb_generic_driver_probe+0x82/0xa0 [ 47.630385][ T1897] usb_probe_device+0xbb/0x250 [ 47.630927][ T1897] ? usb_suspend+0x590/0x590 [ 47.631397][ T1897] really_probe+0x205/0xb70 [ 47.631855][ T1897] ? driver_allows_async_probing+0x130/0x130 [ 47.632469][ T1897] __driver_probe_device+0x311/0x4b0 [ 47.633002][ T1897] ? usb_generic_driver_match+0x75/0x90 [ 47.633573][ T1897] ? driver_allows_async_probing+0x130/0x130 [ 47.634170][ T1897] driver_probe_device+0x4e/0x150 [ 47.634703][ T1897] __device_attach_driver+0x1cc/0x2a0 [ 47.635248][ T1897] bus_for_each_drv+0x156/0x1d0 [ 47.635748][ T1897] ? bus_rescan_devices+0x30/0x30 [ 47.636271][ T1897] ? lockdep_hardirqs_on_prepare+0x273/0x3e0 [ 47.636881][ T1897] ? trace_hardirqs_on+0x46/0x160 [ 47.637396][ T1897] __device_attach+0x23f/0x3a0 [ 47.637904][ T1897] ? device_bind_driver+0xd0/0xd0 [ 47.638426][ T1897] ? kobject_uevent_env+0x287/0x14b0 [ 47.638985][ T1897] bus_probe_device+0x1da/0x290 [ 47.639512][ T1897] device_add+0xb7b/0x1eb0 [ 47.639977][ T1897] ? __fw_devlink_link_to_suppliers+0x5a0/0x5a0 [ 47.640612][ T1897] ? kfree+0x14a/0x6b0 [ 47.641055][ T1897] ? __usb_get_extra_descriptor+0x116/0x160 [ 47.641679][ T1897] usb_new_device.cold+0x49c/0x1029 [ 47.642245][ T1897] ? hub_disconnect+0x450/0x450 [ 47.642756][ T1897] ? rwlock_bug.part.0+0x90/0x90 [ 47.643273][ T1897] ? _raw_spin_unlock_irq+0x24/0x30 [ 47.643822][ T1897] ? lockdep_hardirqs_on_prepare+0x273/0x3e0 [ 47.644445][ T1897] hub_event+0x1c98/0x3950 [ 47.644939][ T1897] ? hub_port_debounce+0x2e0/0x2e0 [ 47.645467][ T1897] ? check_irq_usage+0x861/0xf20 [ 47.645975][ T1897] ? drain_workqueue+0x280/0x360 [ 47.646506][ T1897] ? lock_release+0x640/0x640 [ 47.646994][ T1897] ? rcu_read_lock_sched_held+0xa1/0xd0 [ 47.647572][ T1897] ? rcu_read_lock_bh_held+0xb0/0xb0 [ 47.648111][ T1897] ? lockdep_hardirqs_on_prepare+0x273/0x3e0 [ 47.648735][ T1897] process_one_work+0x92b/0x1460 [ 47.649262][ T1897] ? pwq_dec_nr_in_flight+0x330/0x330 [ 47.649816][ T1897] ? rwlock_bug.part.0+0x90/0x90 [ 47.650336][ T1897] worker_thread+0x95/0xe00 [ 47.650830][ T1897] ? __kthread_parkme+0x115/0x1e0 [ 47.651361][ T1897] ? process_one_work+0x1460/0x1460 [ 47.651904][ T1897] kthread+0x3a1/0x480 [ 47.652329][ T1897] ? set_kthread_struct+0x120/0x120 [ 47.652878][ T1897] ret_from_fork+0x1f/0x30 [ 47.653370][ T1897] [ 47.653608][ T1897] [ 47.653848][ T1897] addr ffffc90001f6f000 is located in stack of task kworker/0:2/1897 at offset 512 in frame: [ 47.654891][ T1897] brcmf_c_preinit_dcmds+0x0/0xc40 [ 47.655442][ T1897] [ 47.655690][ T1897] this frame has 4 objects: [ 47.656151][ T1897] [48, 56) 'ptr' [ 47.656159][ T1897] [80, 148) 'revinfo' [ 47.656534][ T1897] [192, 210) 'eventmask' [ 47.656953][ T1897] [256, 512) 'buf' [ 47.657410][ T1897] [ 47.658035][ T1897] Memory state around the buggy address: [ 47.658743][ T1897] ffffc90001f6ef00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 47.659577][ T1897] ffffc90001f6ef80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 47.660394][ T1897] >ffffc90001f6f000: f3 f3 f3 f3 f3 f3 f3 f3 00 00 00 00 00 00 00 00 [ 47.661199][ T1897] ^ [ 47.661625][ T1897] ffffc90001f6f080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 47.662455][ T1897] ffffc90001f6f100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 [ 47.663318][ T1897] ================================================================== [ 47.664147][ T1897] Disabling lock debugging due to kernel taint Reported-by: Dokyung Song <dokyungs@yonsei.ac.kr> Reported-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr> Reported-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr> Signed-off-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221115043458.37562-1-jisoo.jang@yonsei.ac.kr Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 0a06cadcc2a0044e4a117cc0e61436fc3a0dad69 ]

This patch fixes a stack-out-of-bounds read in brcmfmac that occurs
when 'buf' that is not null-terminated is passed as an argument of
strsep() in brcmf_c_preinit_dcmds(). This buffer is filled with a firmware
version string by memcpy() in brcmf_fil_iovar_data_get().
The patch ensures buf is null-terminated.

Found by a modified version of syzkaller.

[   47.569679][ T1897] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43236b for chip BCM43236/3
[   47.582839][ T1897] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
[   47.601565][ T1897] ==================================================================
[   47.602574][ T1897] BUG: KASAN: stack-out-of-bounds in strsep+0x1b2/0x1f0
[   47.603447][ T1897] Read of size 1 at addr ffffc90001f6f000 by task kworker/0:2/1897
[   47.604336][ T1897]
[   47.604621][ T1897] CPU: 0 PID: 1897 Comm: kworker/0:2 Tainted: G           O      5.14.0+ #131
[   47.605617][ T1897] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
[   47.606907][ T1897] Workqueue: usb_hub_wq hub_event
[   47.607453][ T1897] Call Trace:
[   47.607801][ T1897]  dump_stack_lvl+0x8e/0xd1
[   47.608295][ T1897]  print_address_description.constprop.0.cold+0xf/0x334
[   47.609009][ T1897]  ? strsep+0x1b2/0x1f0
[   47.609434][ T1897]  ? strsep+0x1b2/0x1f0
[   47.609863][ T1897]  kasan_report.cold+0x83/0xdf
[   47.610366][ T1897]  ? strsep+0x1b2/0x1f0
[   47.610882][ T1897]  strsep+0x1b2/0x1f0
[   47.611300][ T1897]  ? brcmf_fil_iovar_data_get+0x3a/0xf0
[   47.611883][ T1897]  brcmf_c_preinit_dcmds+0x995/0xc40
[   47.612434][ T1897]  ? brcmf_c_set_joinpref_default+0x100/0x100
[   47.613078][ T1897]  ? rcu_read_lock_sched_held+0xa1/0xd0
[   47.613662][ T1897]  ? rcu_read_lock_bh_held+0xb0/0xb0
[   47.614208][ T1897]  ? lock_acquire+0x19d/0x4e0
[   47.614704][ T1897]  ? find_held_lock+0x2d/0x110
[   47.615236][ T1897]  ? brcmf_usb_deq+0x1a7/0x260
[   47.615741][ T1897]  ? brcmf_usb_rx_fill_all+0x5a/0xf0
[   47.616288][ T1897]  brcmf_attach+0x246/0xd40
[   47.616758][ T1897]  ? wiphy_new_nm+0x1703/0x1dd0
[   47.617280][ T1897]  ? kmemdup+0x43/0x50
[   47.617720][ T1897]  brcmf_usb_probe+0x12de/0x1690
[   47.618244][ T1897]  ? brcmf_usbdev_qinit.constprop.0+0x470/0x470
[   47.618901][ T1897]  usb_probe_interface+0x2aa/0x760
[   47.619429][ T1897]  ? usb_probe_device+0x250/0x250
[   47.619950][ T1897]  really_probe+0x205/0xb70
[   47.620435][ T1897]  ? driver_allows_async_probing+0x130/0x130
[   47.621048][ T1897]  __driver_probe_device+0x311/0x4b0
[   47.621595][ T1897]  ? driver_allows_async_probing+0x130/0x130
[   47.622209][ T1897]  driver_probe_device+0x4e/0x150
[   47.622739][ T1897]  __device_attach_driver+0x1cc/0x2a0
[   47.623287][ T1897]  bus_for_each_drv+0x156/0x1d0
[   47.623796][ T1897]  ? bus_rescan_devices+0x30/0x30
[   47.624309][ T1897]  ? lockdep_hardirqs_on_prepare+0x273/0x3e0
[   47.624907][ T1897]  ? trace_hardirqs_on+0x46/0x160
[   47.625437][ T1897]  __device_attach+0x23f/0x3a0
[   47.625924][ T1897]  ? device_bind_driver+0xd0/0xd0
[   47.626433][ T1897]  ? kobject_uevent_env+0x287/0x14b0
[   47.627057][ T1897]  bus_probe_device+0x1da/0x290
[   47.627557][ T1897]  device_add+0xb7b/0x1eb0
[   47.628027][ T1897]  ? wait_for_completion+0x290/0x290
[   47.628593][ T1897]  ? __fw_devlink_link_to_suppliers+0x5a0/0x5a0
[   47.629249][ T1897]  usb_set_configuration+0xf59/0x16f0
[   47.629829][ T1897]  usb_generic_driver_probe+0x82/0xa0
[   47.630385][ T1897]  usb_probe_device+0xbb/0x250
[   47.630927][ T1897]  ? usb_suspend+0x590/0x590
[   47.631397][ T1897]  really_probe+0x205/0xb70
[   47.631855][ T1897]  ? driver_allows_async_probing+0x130/0x130
[   47.632469][ T1897]  __driver_probe_device+0x311/0x4b0
[   47.633002][ T1897]  ? usb_generic_driver_match+0x75/0x90
[   47.633573][ T1897]  ? driver_allows_async_probing+0x130/0x130
[   47.634170][ T1897]  driver_probe_device+0x4e/0x150
[   47.634703][ T1897]  __device_attach_driver+0x1cc/0x2a0
[   47.635248][ T1897]  bus_for_each_drv+0x156/0x1d0
[   47.635748][ T1897]  ? bus_rescan_devices+0x30/0x30
[   47.636271][ T1897]  ? lockdep_hardirqs_on_prepare+0x273/0x3e0
[   47.636881][ T1897]  ? trace_hardirqs_on+0x46/0x160
[   47.637396][ T1897]  __device_attach+0x23f/0x3a0
[   47.637904][ T1897]  ? device_bind_driver+0xd0/0xd0
[   47.638426][ T1897]  ? kobject_uevent_env+0x287/0x14b0
[   47.638985][ T1897]  bus_probe_device+0x1da/0x290
[   47.639512][ T1897]  device_add+0xb7b/0x1eb0
[   47.639977][ T1897]  ? __fw_devlink_link_to_suppliers+0x5a0/0x5a0
[   47.640612][ T1897]  ? kfree+0x14a/0x6b0
[   47.641055][ T1897]  ? __usb_get_extra_descriptor+0x116/0x160
[   47.641679][ T1897]  usb_new_device.cold+0x49c/0x1029
[   47.642245][ T1897]  ? hub_disconnect+0x450/0x450
[   47.642756][ T1897]  ? rwlock_bug.part.0+0x90/0x90
[   47.643273][ T1897]  ? _raw_spin_unlock_irq+0x24/0x30
[   47.643822][ T1897]  ? lockdep_hardirqs_on_prepare+0x273/0x3e0
[   47.644445][ T1897]  hub_event+0x1c98/0x3950
[   47.644939][ T1897]  ? hub_port_debounce+0x2e0/0x2e0
[   47.645467][ T1897]  ? check_irq_usage+0x861/0xf20
[   47.645975][ T1897]  ? drain_workqueue+0x280/0x360
[   47.646506][ T1897]  ? lock_release+0x640/0x640
[   47.646994][ T1897]  ? rcu_read_lock_sched_held+0xa1/0xd0
[   47.647572][ T1897]  ? rcu_read_lock_bh_held+0xb0/0xb0
[   47.648111][ T1897]  ? lockdep_hardirqs_on_prepare+0x273/0x3e0
[   47.648735][ T1897]  process_one_work+0x92b/0x1460
[   47.649262][ T1897]  ? pwq_dec_nr_in_flight+0x330/0x330
[   47.649816][ T1897]  ? rwlock_bug.part.0+0x90/0x90
[   47.650336][ T1897]  worker_thread+0x95/0xe00
[   47.650830][ T1897]  ? __kthread_parkme+0x115/0x1e0
[   47.651361][ T1897]  ? process_one_work+0x1460/0x1460
[   47.651904][ T1897]  kthread+0x3a1/0x480
[   47.652329][ T1897]  ? set_kthread_struct+0x120/0x120
[   47.652878][ T1897]  ret_from_fork+0x1f/0x30
[   47.653370][ T1897]
[   47.653608][ T1897]
[   47.653848][ T1897] addr ffffc90001f6f000 is located in stack of task kworker/0:2/1897 at offset 512 in frame:
[   47.654891][ T1897]  brcmf_c_preinit_dcmds+0x0/0xc40
[   47.655442][ T1897]
[   47.655690][ T1897] this frame has 4 objects:
[   47.656151][ T1897]  [48, 56) 'ptr'
[   47.656159][ T1897]  [80, 148) 'revinfo'
[   47.656534][ T1897]  [192, 210) 'eventmask'
[   47.656953][ T1897]  [256, 512) 'buf'
[   47.657410][ T1897]
[   47.658035][ T1897] Memory state around the buggy address:
[   47.658743][ T1897]  ffffc90001f6ef00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   47.659577][ T1897]  ffffc90001f6ef80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   47.660394][ T1897] >ffffc90001f6f000: f3 f3 f3 f3 f3 f3 f3 f3 00 00 00 00 00 00 00 00
[   47.661199][ T1897]                    ^
[   47.661625][ T1897]  ffffc90001f6f080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   47.662455][ T1897]  ffffc90001f6f100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1
[   47.663318][ T1897] ==================================================================
[   47.664147][ T1897] Disabling lock debugging due to kernel taint

Reported-by: Dokyung Song <dokyungs@yonsei.ac.kr>
Reported-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr>
Reported-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr>
Signed-off-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221115043458.37562-1-jisoo.jang@yonsei.ac.kr
Signed-off-by: Sasha Levin <sashal@kernel.org>
wifi: mwifiex: fix loop iterator in mwifiex_update_ampdu_txwinsize() 2023-03-11T15:43:42+00:00 Dan Carpenter error27@gmail.com 2023-02-06T14:41:33+00:00 a3b75b1e767a6c335743b96b395d0dd34f5204e3 [ Upstream commit 3cfb7df24cee0f5fdc4cc5d3176cab9aadfcb430 ] This code re-uses "i" to be the iterator for both the inside and outside loops. It means the outside loop will exit earlier than intended. Fixes: d219b7eb3792 ("mwifiex: handle BT coex event to adjust Rx BA window size") Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/Y+ERnaDaZD7RtLvX@kili Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 3cfb7df24cee0f5fdc4cc5d3176cab9aadfcb430 ]

This code re-uses "i" to be the iterator for both the inside and outside
loops.  It means the outside loop will exit earlier than intended.

Fixes: d219b7eb3792 ("mwifiex: handle BT coex event to adjust Rx BA window size")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/Y+ERnaDaZD7RtLvX@kili
Signed-off-by: Sasha Levin <sashal@kernel.org>
wifi: iwl4965: Add missing check for create_singlethread_workqueue() 2023-03-11T15:43:42+00:00 Jiasheng Jiang jiasheng@iscas.ac.cn 2023-02-09T01:07:48+00:00 c002d2741400771171b68dde9af937a4dfa0d1b3 [ Upstream commit 26e6775f75517ad6844fe5b79bc5f3fa8c22ee61 ] Add the check for the return value of the create_singlethread_workqueue() in order to avoid NULL pointer dereference. Fixes: b481de9ca074 ("[IWLWIFI]: add iwlwifi wireless drivers") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230209010748.45454-1-jiasheng@iscas.ac.cn Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 26e6775f75517ad6844fe5b79bc5f3fa8c22ee61 ]

Add the check for the return value of the create_singlethread_workqueue()
in order to avoid NULL pointer dereference.

Fixes: b481de9ca074 ("[IWLWIFI]: add iwlwifi wireless drivers")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230209010748.45454-1-jiasheng@iscas.ac.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
wifi: iwl3945: Add missing check for create_singlethread_workqueue 2023-03-11T15:43:42+00:00 Jiasheng Jiang jiasheng@iscas.ac.cn 2023-02-08T06:30:32+00:00 7e594abc0424e4f8c2385f11aefeaadcfc507aa5 [ Upstream commit 1fdeb8b9f29dfd64805bb49475ac7566a3cb06cb ] Add the check for the return value of the create_singlethread_workqueue in order to avoid NULL pointer dereference. Fixes: b481de9ca074 ("[IWLWIFI]: add iwlwifi wireless drivers") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230208063032.42763-2-jiasheng@iscas.ac.cn Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 1fdeb8b9f29dfd64805bb49475ac7566a3cb06cb ]

Add the check for the return value of the create_singlethread_workqueue
in order to avoid NULL pointer dereference.

Fixes: b481de9ca074 ("[IWLWIFI]: add iwlwifi wireless drivers")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230208063032.42763-2-jiasheng@iscas.ac.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>