linux-stable.git/drivers/net/wireless, branch v5.4.223

wifi: rt2x00: correctly set BBP register 86 for MT7620

2022-10-26T11:22:51+00:00

[ Upstream commit c9aada64fe6493461127f1522d7e2f01792d2424 ]

Instead of 0 set the correct value for BBP register 86 for MT7620.

Reported-by: Serge Vasilugin 
Signed-off-by: Daniel Golle 
Acked-by: Stanislaw Gruszka 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/257267247ee4fa7ebc6a5d0c4948b3f8119c0d77.1663445157.git.daniel@makrotopia.org
Signed-off-by: Sasha Levin

wifi: rt2x00: set SoC wmac clock register

2022-10-26T11:22:50+00:00

[ Upstream commit cbde6ed406a51092d9e8a2df058f5f8490f27443 ]

Instead of using the default value 33 (pci), set US_CYC_CNT init based
on Programming guide:
If available, set chipset bus clock with fallback to cpu clock/3.

Reported-by: Serge Vasilugin 
Signed-off-by: Daniel Golle 
Acked-by: Stanislaw Gruszka 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/3e275d259f476f597dab91a9c395015ef3fe3284.1663445157.git.daniel@makrotopia.org
Signed-off-by: Sasha Levin

wifi: rt2x00: set VGC gain for both chains of MT7620

2022-10-26T11:22:50+00:00

[ Upstream commit 0e09768c085709e10ece3b68f6ac921d3f6a9caa ]

Set bbp66 for all chains of the MT7620.

Reported-by: Serge Vasilugin 
Signed-off-by: Daniel Golle 
Acked-by: Stanislaw Gruszka 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/29e161397e5c9d9399da0fe87d44458aa2b90a78.1663445157.git.daniel@makrotopia.org
Signed-off-by: Sasha Levin

wifi: rt2x00: set correct TX_SW_CFG1 MAC register for MT7620

2022-10-26T11:22:50+00:00

[ Upstream commit eeb50acf15762b61921f9df18663f839f387c054 ]

Set correct TX_SW_CFG1 MAC register as it is done also in v3 of the
vendor driver[1].

[1]: https://gitlab.com/dm38/padavan-ng/-/blob/master/trunk/proprietary/rt_wifi/rtpci/3.0.X.X/mt76x2/chips/rt6352.c#L531
Reported-by: Serge Vasilugin 
Signed-off-by: Daniel Golle 
Acked-by: Stanislaw Gruszka 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/4be38975ce600a34249e12d09a3cb758c6e71071.1663445157.git.daniel@makrotopia.org
Signed-off-by: Sasha Levin

wifi: rt2x00: don't run Rt5592 IQ calibration on MT7620

2022-10-26T11:22:50+00:00

[ Upstream commit d3aad83d05aec0cfd7670cf0028f2ad4b81de92e ]

The function rt2800_iq_calibrate is intended for Rt5592 only.
Don't call it for MT7620 which has it's own calibration functions.

Reported-by: Serge Vasilugin 
Signed-off-by: Daniel Golle 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/31a1c34ddbd296b82f38c18c9ae7339059215fdc.1663445157.git.daniel@makrotopia.org
Signed-off-by: Sasha Levin

wifi: brcmfmac: fix use-after-free bug in brcmf_netdev_start_xmit()

2022-10-26T11:22:49+00:00

[ Upstream commit 3f42faf6db431e04bf942d2ebe3ae88975723478 ]

> ret = brcmf_proto_tx_queue_data(drvr, ifp->ifidx, skb);

may be schedule, and then complete before the line

> ndev->stats.tx_bytes += skb->len;

[   46.912801] ==================================================================
[   46.920552] BUG: KASAN: use-after-free in brcmf_netdev_start_xmit+0x718/0x8c8 [brcmfmac]
[   46.928673] Read of size 4 at addr ffffff803f5882e8 by task systemd-resolve/328
[   46.935991]
[   46.937514] CPU: 1 PID: 328 Comm: systemd-resolve Tainted: G           O      5.4.199-[REDACTED] #1
[   46.947255] Hardware name: [REDACTED]
[   46.954568] Call trace:
[   46.957037]  dump_backtrace+0x0/0x2b8
[   46.960719]  show_stack+0x24/0x30
[   46.964052]  dump_stack+0x128/0x194
[   46.967557]  print_address_description.isra.0+0x64/0x380
[   46.972877]  __kasan_report+0x1d4/0x240
[   46.976723]  kasan_report+0xc/0x18
[   46.980138]  __asan_report_load4_noabort+0x18/0x20
[   46.985027]  brcmf_netdev_start_xmit+0x718/0x8c8 [brcmfmac]
[   46.990613]  dev_hard_start_xmit+0x1bc/0xda0
[   46.994894]  sch_direct_xmit+0x198/0xd08
[   46.998827]  __qdisc_run+0x37c/0x1dc0
[   47.002500]  __dev_queue_xmit+0x1528/0x21f8
[   47.006692]  dev_queue_xmit+0x24/0x30
[   47.010366]  neigh_resolve_output+0x37c/0x678
[   47.014734]  ip_finish_output2+0x598/0x2458
[   47.018927]  __ip_finish_output+0x300/0x730
[   47.023118]  ip_output+0x2e0/0x430
[   47.026530]  ip_local_out+0x90/0x140
[   47.030117]  igmpv3_sendpack+0x14c/0x228
[   47.034049]  igmpv3_send_cr+0x384/0x6b8
[   47.037895]  igmp_ifc_timer_expire+0x4c/0x118
[   47.042262]  call_timer_fn+0x1cc/0xbe8
[   47.046021]  __run_timers+0x4d8/0xb28
[   47.049693]  run_timer_softirq+0x24/0x40
[   47.053626]  __do_softirq+0x2c0/0x117c
[   47.057387]  irq_exit+0x2dc/0x388
[   47.060715]  __handle_domain_irq+0xb4/0x158
[   47.064908]  gic_handle_irq+0x58/0xb0
[   47.068581]  el0_irq_naked+0x50/0x5c
[   47.072162]
[   47.073665] Allocated by task 328:
[   47.077083]  save_stack+0x24/0xb0
[   47.080410]  __kasan_kmalloc.isra.0+0xc0/0xe0
[   47.084776]  kasan_slab_alloc+0x14/0x20
[   47.088622]  kmem_cache_alloc+0x15c/0x468
[   47.092643]  __alloc_skb+0xa4/0x498
[   47.096142]  igmpv3_newpack+0x158/0xd78
[   47.099987]  add_grhead+0x210/0x288
[   47.103485]  add_grec+0x6b0/0xb70
[   47.106811]  igmpv3_send_cr+0x2e0/0x6b8
[   47.110657]  igmp_ifc_timer_expire+0x4c/0x118
[   47.115027]  call_timer_fn+0x1cc/0xbe8
[   47.118785]  __run_timers+0x4d8/0xb28
[   47.122457]  run_timer_softirq+0x24/0x40
[   47.126389]  __do_softirq+0x2c0/0x117c
[   47.130142]
[   47.131643] Freed by task 180:
[   47.134712]  save_stack+0x24/0xb0
[   47.138041]  __kasan_slab_free+0x108/0x180
[   47.142146]  kasan_slab_free+0x10/0x18
[   47.145904]  slab_free_freelist_hook+0xa4/0x1b0
[   47.150444]  kmem_cache_free+0x8c/0x528
[   47.154292]  kfree_skbmem+0x94/0x108
[   47.157880]  consume_skb+0x10c/0x5a8
[   47.161466]  __dev_kfree_skb_any+0x88/0xa0
[   47.165598]  brcmu_pkt_buf_free_skb+0x44/0x68 [brcmutil]
[   47.171023]  brcmf_txfinalize+0xec/0x190 [brcmfmac]
[   47.176016]  brcmf_proto_bcdc_txcomplete+0x1c0/0x210 [brcmfmac]
[   47.182056]  brcmf_sdio_sendfromq+0x8dc/0x1e80 [brcmfmac]
[   47.187568]  brcmf_sdio_dpc+0xb48/0x2108 [brcmfmac]
[   47.192529]  brcmf_sdio_dataworker+0xc8/0x238 [brcmfmac]
[   47.197859]  process_one_work+0x7fc/0x1a80
[   47.201965]  worker_thread+0x31c/0xc40
[   47.205726]  kthread+0x2d8/0x370
[   47.208967]  ret_from_fork+0x10/0x18
[   47.212546]
[   47.214051] The buggy address belongs to the object at ffffff803f588280
[   47.214051]  which belongs to the cache skbuff_head_cache of size 208
[   47.227086] The buggy address is located 104 bytes inside of
[   47.227086]  208-byte region [ffffff803f588280, ffffff803f588350)
[   47.238814] The buggy address belongs to the page:
[   47.243618] page:ffffffff00dd6200 refcount:1 mapcount:0 mapping:ffffff804b6bf800 index:0xffffff803f589900 compound_mapcount: 0
[   47.255007] flags: 0x10200(slab|head)
[   47.258689] raw: 0000000000010200 ffffffff00dfa980 0000000200000002 ffffff804b6bf800
[   47.266439] raw: ffffff803f589900 0000000080190018 00000001ffffffff 0000000000000000
[   47.274180] page dumped because: kasan: bad access detected
[   47.279752]
[   47.281251] Memory state around the buggy address:
[   47.286051]  ffffff803f588180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[   47.293277]  ffffff803f588200: fb fb fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   47.300502] >ffffff803f588280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[   47.307723]                                                           ^
[   47.314343]  ffffff803f588300: fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc fc
[   47.321569]  ffffff803f588380: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
[   47.328789] ==================================================================

Signed-off-by: Alexander Coffin 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/20220808174925.3922558-1-alex.coffin@matician.com
Signed-off-by: Sasha Levin

wifi: ath9k: avoid uninit memory read in ath9k_htc_rx_msg()

2022-10-26T11:22:49+00:00

[ Upstream commit b383e8abed41cc6ff1a3b34de75df9397fa4878c ]

syzbot is reporting uninit value at ath9k_htc_rx_msg() [1], for
ioctl(USB_RAW_IOCTL_EP_WRITE) can call ath9k_hif_usb_rx_stream() with
pkt_len = 0 but ath9k_hif_usb_rx_stream() uses
__dev_alloc_skb(pkt_len + 32, GFP_ATOMIC) based on an assumption that
pkt_len is valid. As a result, ath9k_hif_usb_rx_stream() allocates skb
with uninitialized memory and ath9k_htc_rx_msg() is reading from
uninitialized memory.

Since bytes accessed by ath9k_htc_rx_msg() is not known until
ath9k_htc_rx_msg() is called, it would be difficult to check minimal valid
pkt_len at "if (pkt_len > 2 * MAX_RX_BUF_SIZE) {" line in
ath9k_hif_usb_rx_stream().

We have two choices. One is to workaround by adding __GFP_ZERO so that
ath9k_htc_rx_msg() sees 0 if pkt_len is invalid. The other is to let
ath9k_htc_rx_msg() validate pkt_len before accessing. This patch chose
the latter.

Note that I'm not sure threshold condition is correct, for I can't find
details on possible packet length used by this protocol.

Link: https://syzkaller.appspot.com/bug?extid=2ca247c2d60c7023de7f [1]
Reported-by: syzbot 
Signed-off-by: Tetsuo Handa 
Acked-by: Toke Høiland-Jørgensen 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/7acfa1be-4b5c-b2ce-de43-95b0593fb3e5@I-love.SAKURA.ne.jp
Signed-off-by: Sasha Levin

wifi: brcmfmac: fix invalid address access when enabling SCAN log level

2022-10-26T11:22:48+00:00

[ Upstream commit aa666b68e73fc06d83c070d96180b9010cf5a960 ]

The variable i is changed when setting random MAC address and causes
invalid address access when printing the value of pi->reqs[i]->reqid.

We replace reqs index with ri to fix the issue.

[  136.726473] Unable to handle kernel access to user memory outside uaccess routines at virtual address 0000000000000000
[  136.737365] Mem abort info:
[  136.740172]   ESR = 0x96000004
[  136.743359]   Exception class = DABT (current EL), IL = 32 bits
[  136.749294]   SET = 0, FnV = 0
[  136.752481]   EA = 0, S1PTW = 0
[  136.755635] Data abort info:
[  136.758514]   ISV = 0, ISS = 0x00000004
[  136.762487]   CM = 0, WnR = 0
[  136.765522] user pgtable: 4k pages, 48-bit VAs, pgdp = 000000005c4e2577
[  136.772265] [0000000000000000] pgd=0000000000000000
[  136.777160] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[  136.782732] Modules linked in: brcmfmac(O) brcmutil(O) cfg80211(O) compat(O)
[  136.789788] Process wificond (pid: 3175, stack limit = 0x00000000053048fb)
[  136.796664] CPU: 3 PID: 3175 Comm: wificond Tainted: G           O      4.19.42-00001-g531a5f5 #1
[  136.805532] Hardware name: Freescale i.MX8MQ EVK (DT)
[  136.810584] pstate: 60400005 (nZCv daif +PAN -UAO)
[  136.815429] pc : brcmf_pno_config_sched_scans+0x6cc/0xa80 [brcmfmac]
[  136.821811] lr : brcmf_pno_config_sched_scans+0x67c/0xa80 [brcmfmac]
[  136.828162] sp : ffff00000e9a3880
[  136.831475] x29: ffff00000e9a3890 x28: ffff800020543400
[  136.836786] x27: ffff8000b1008880 x26: ffff0000012bf6a0
[  136.842098] x25: ffff80002054345c x24: ffff800088d22400
[  136.847409] x23: ffff0000012bf638 x22: ffff0000012bf6d8
[  136.852721] x21: ffff8000aced8fc0 x20: ffff8000ac164400
[  136.858032] x19: ffff00000e9a3946 x18: 0000000000000000
[  136.863343] x17: 0000000000000000 x16: 0000000000000000
[  136.868655] x15: ffff0000093f3b37 x14: 0000000000000050
[  136.873966] x13: 0000000000003135 x12: 0000000000000000
[  136.879277] x11: 0000000000000000 x10: ffff000009a61888
[  136.884589] x9 : 000000000000000f x8 : 0000000000000008
[  136.889900] x7 : 303a32303d726464 x6 : ffff00000a1f957d
[  136.895211] x5 : 0000000000000000 x4 : ffff00000e9a3942
[  136.900523] x3 : 0000000000000000 x2 : ffff0000012cead8
[  136.905834] x1 : ffff0000012bf6d8 x0 : 0000000000000000
[  136.911146] Call trace:
[  136.913623]  brcmf_pno_config_sched_scans+0x6cc/0xa80 [brcmfmac]
[  136.919658]  brcmf_pno_start_sched_scan+0xa4/0x118 [brcmfmac]
[  136.925430]  brcmf_cfg80211_sched_scan_start+0x80/0xe0 [brcmfmac]
[  136.931636]  nl80211_start_sched_scan+0x140/0x308 [cfg80211]
[  136.937298]  genl_rcv_msg+0x358/0x3f4
[  136.940960]  netlink_rcv_skb+0xb4/0x118
[  136.944795]  genl_rcv+0x34/0x48
[  136.947935]  netlink_unicast+0x264/0x300
[  136.951856]  netlink_sendmsg+0x2e4/0x33c
[  136.955781]  __sys_sendto+0x120/0x19c

Signed-off-by: Wright Feng 
Signed-off-by: Chi-hsien Lin 
Signed-off-by: Ahmad Fatoum 
Signed-off-by: Alvin Šipraga 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/20220722115632.620681-4-alvin@pqrs.dk
Signed-off-by: Sasha Levin

wifi: rtl8xxxu: gen2: Fix mistake in path B IQ calibration

2022-10-26T11:22:24+00:00

[ Upstream commit e963a19c64ac0d2f8785d36a27391abd91ac77aa ]

Found by comparing with the vendor driver. Currently this affects
only the RTL8192EU, which is the only gen2 chip with 2 TX paths
supported by this driver. It's unclear what kind of effect the
mistake had in practice, since I don't have any RTL8192EU devices
to test it.

Fixes: e1547c535ede ("rtl8xxxu: First stab at adding IQK calibration for 8723bu parts")
Signed-off-by: Bitterblue Smith 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/30a59f3a-cfa9-8379-7af0-78a8f4c77cfd@gmail.com
Signed-off-by: Sasha Levin

wifi: rtl8xxxu: Fix skb misuse in TX queue selection

2022-10-26T11:22:23+00:00

[ Upstream commit edd5747aa12ed61a5ecbfa58d3908623fddbf1e8 ]

rtl8xxxu_queue_select() selects the wrong TX queues because it's
reading memory from the wrong address. It expects to find ieee80211_hdr
at skb->data, but that's not the case after skb_push(). Move the call
to rtl8xxxu_queue_select() before the call to skb_push().

Fixes: 26f1fad29ad9 ("New driver: rtl8xxxu (mac80211)")
Signed-off-by: Bitterblue Smith 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/7fa4819a-4f20-b2af-b7a6-8ee01ac49295@gmail.com
Signed-off-by: Sasha Levin