linux-stable.git/drivers/net/wireless, branch v5.4.182

iwlwifi: pcie: gen2: fix locking when "HW not ready"

2022-02-23T10:59:57+00:00

commit 4c29c1e27a1e178a219b3877d055e6dd643bdfda upstream.

If we run into this error path, we shouldn't unlock the mutex
since it's not locked since. Fix this in the gen2 code as well.

Fixes: eda50cde58de ("iwlwifi: pcie: add context information support")
Signed-off-by: Johannes Berg 
Signed-off-by: Luca Coelho 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/iwlwifi.20220128142706.b8b0dfce16ef.Ie20f0f7b23e5911350a2766524300d2915e7b677@changeid
Signed-off-by: Greg Kroah-Hartman

iwlwifi: pcie: fix locking when "HW not ready"

2022-02-23T10:59:57+00:00

commit e9848aed147708a06193b40d78493b0ef6abccf2 upstream.

If we run into this error path, we shouldn't unlock the mutex
since it's not locked since. Fix this.

Fixes: a6bd005fe92d ("iwlwifi: pcie: fix RF-Kill vs. firmware load race")
Signed-off-by: Johannes Berg 
Signed-off-by: Luca Coelho 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/iwlwifi.20220128142706.5d16821d1433.Id259699ddf9806459856d6aefbdbe54477aecffd@changeid
Signed-off-by: Greg Kroah-Hartman

iwlwifi: fix use-after-free

2022-02-23T10:59:56+00:00

commit bea2662e7818e15d7607d17d57912ac984275d94 upstream.

If no firmware was present at all (or, presumably, all of the
firmware files failed to parse), we end up unbinding by calling
device_release_driver(), which calls remove(), which then in
iwlwifi calls iwl_drv_stop(), freeing the 'drv' struct. However
the new code I added will still erroneously access it after it
was freed.

Set 'failure=false' in this case to avoid the access, all data
was already freed anyway.

Cc: stable@vger.kernel.org
Reported-by: Stefan Agner 
Reported-by: Wolfgang Walter 
Reported-by: Jason Self 
Reported-by: Dominik Behr 
Reported-by: Marek Marczykowski-Górecki 
Fixes: ab07506b0454 ("iwlwifi: fix leaks/bad data after failed firmware load")
Signed-off-by: Johannes Berg 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/20220208114728.e6b514cf4c85.Iffb575ca2a623d7859b542c33b2a507d01554251@changeid
Signed-off-by: Greg Kroah-Hartman

iwlwifi: mvm: Increase the scan timeout guard to 30 seconds

2022-01-27T08:19:49+00:00

commit ced50f1133af12f7521bb777fcf4046ca908fb77 upstream.

With the introduction of 6GHz channels the scan guard timeout should
be adjusted to account for the following extreme case:

- All 6GHz channels are scanned passively: 58 channels.
- The scan is fragmented with the following parameters: 3 fragments,
  95 TUs suspend time, 44 TUs maximal out of channel time.

The above would result with scan time of more than 24 seconds. Thus,
set the timeout to 30 seconds.

Cc: stable@vger.kernel.org
Signed-off-by: Ilan Peer 
Signed-off-by: Luca Coelho 
Link: https://lore.kernel.org/r/iwlwifi.20211210090244.3c851b93aef5.I346fa2e1d79220a6770496e773c6f87a2ad9e6c4@changeid
Signed-off-by: Luca Coelho 
Signed-off-by: Greg Kroah-Hartman

iwlwifi: mvm: Fix calculation of frame length

2022-01-27T08:19:44+00:00

[ Upstream commit 40a0b38d7a7f91a6027287e0df54f5f547e8d27e ]

The RADA might include in the Rx frame the MIC and CRC bytes.
These bytes should be removed for non monitor interfaces and
should not be passed to mac80211.

Fix the Rx processing to remove the extra bytes on non monitor
cases.

Signed-off-by: Ilan Peer 
Signed-off-by: Luca Coelho 
Link: https://lore.kernel.org/r/iwlwifi.20211219121514.098be12c801e.I1d81733d8a75b84c3b20eb6e0d14ab3405ca6a86@changeid
Signed-off-by: Luca Coelho 
Signed-off-by: Sasha Levin

iwlwifi: remove module loading failure message

2022-01-27T08:19:44+00:00

[ Upstream commit 6518f83ffa51131daaf439b66094f684da3fb0ae ]

When CONFIG_DEBUG_TEST_DRIVER_REMOVE is set, iwlwifi crashes
when the opmode module cannot be loaded, due to completing
the completion before using drv->dev, which can then already
be freed.

Fix this by removing the (fairly useless) message. Moving the
completion later causes a deadlock instead, so that's not an
option.

Signed-off-by: Johannes Berg 
Signed-off-by: Luca Coelho 
Link: https://lore.kernel.org/r/20211210091245.289008-2-luca@coelho.fi
Signed-off-by: Luca Coelho 
Signed-off-by: Sasha Levin

iwlwifi: fix leaks/bad data after failed firmware load

2022-01-27T08:19:44+00:00

[ Upstream commit ab07506b0454bea606095951e19e72c282bfbb42 ]

If firmware load fails after having loaded some parts of the
firmware, e.g. the IML image, then this would leak. For the
host command list we'd end up running into a WARN on the next
attempt to load another firmware image.

Fix this by calling iwl_dealloc_ucode() on failures, and make
that also clear the data so we start fresh on the next round.

Signed-off-by: Johannes Berg 
Signed-off-by: Luca Coelho 
Link: https://lore.kernel.org/r/iwlwifi.20211210110539.1f742f0eb58a.I1315f22f6aa632d94ae2069f85e1bca5e734dce0@changeid
Signed-off-by: Luca Coelho 
Signed-off-by: Sasha Levin

ath9k: Fix out-of-bound memcpy in ath9k_hif_usb_rx_stream

2022-01-27T08:19:44+00:00

[ Upstream commit 6ce708f54cc8d73beca213cec66ede5ce100a781 ]

Large pkt_len can lead to out-out-bound memcpy. Current
ath9k_hif_usb_rx_stream allows combining the content of two urb
inputs to one pkt. The first input can indicate the size of the
pkt. Any remaining size is saved in hif_dev->rx_remain_len.
While processing the next input, memcpy is used with rx_remain_len.

4-byte pkt_len can go up to 0xffff, while a single input is 0x4000
maximum in size (MAX_RX_BUF_SIZE). Thus, the patch adds a check for
pkt_len which must not exceed 2 * MAX_RX_BUG_SIZE.

BUG: KASAN: slab-out-of-bounds in ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc]
Read of size 46393 at addr ffff888018798000 by task kworker/0:1/23

CPU: 0 PID: 23 Comm: kworker/0:1 Not tainted 5.6.0 #63
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS rel-1.10.2-0-g5f4c7b1-prebuilt.qemu-project.org 04/01/2014
Workqueue: events request_firmware_work_func
Call Trace:
 
 dump_stack+0x76/0xa0
 print_address_description.constprop.0+0x16/0x200
 ? ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc]
 ? ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc]
 __kasan_report.cold+0x37/0x7c
 ? ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc]
 kasan_report+0xe/0x20
 check_memory_region+0x15a/0x1d0
 memcpy+0x20/0x50
 ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc]
 ? hif_usb_mgmt_cb+0x2d9/0x2d9 [ath9k_htc]
 ? _raw_spin_lock_irqsave+0x7b/0xd0
 ? _raw_spin_trylock_bh+0x120/0x120
 ? __usb_unanchor_urb+0x12f/0x210
 __usb_hcd_giveback_urb+0x1e4/0x380
 usb_giveback_urb_bh+0x241/0x4f0
 ? __hrtimer_run_queues+0x316/0x740
 ? __usb_hcd_giveback_urb+0x380/0x380
 tasklet_action_common.isra.0+0x135/0x330
 __do_softirq+0x18c/0x634
 irq_exit+0x114/0x140
 smp_apic_timer_interrupt+0xde/0x380
 apic_timer_interrupt+0xf/0x20

I found the bug using a custome USBFuzz port. It's a research work
to fuzz USB stack/drivers. I modified it to fuzz ath9k driver only,
providing hand-crafted usb descriptors to QEMU.

After fixing the value of pkt_tag to ATH_USB_RX_STREAM_MODE_TAG in QEMU
emulation, I found the KASAN report. The bug is triggerable whenever
pkt_len is above two MAX_RX_BUG_SIZE. I used the same input that crashes
to test the driver works when applying the patch.

Signed-off-by: Zekun Shen 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/YXsidrRuK6zBJicZ@10-18-43-117.dynapool.wireless.nyu.edu
Signed-off-by: Sasha Levin

ath10k: Fix tx hanging

2022-01-27T08:19:42+00:00

[ Upstream commit e8a91863eba3966a447d2daa1526082d52b5db2a ]

While running stress tests in roaming scenarios (switching ap's every 5
seconds, we discovered a issue which leads to tx hangings of exactly 5
seconds while or after scanning for new accesspoints. We found out that
this hanging is triggered by ath10k_mac_wait_tx_complete since the
empty_tx_wq was not wake when the num_tx_pending counter reaches zero.
To fix this, we simply move the wake_up call to htt_tx_dec_pending,
since this call was missed on several locations within the ath10k code.

Signed-off-by: Sebastian Gottschall 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/20210505085806.11474-1-s.gottschall@dd-wrt.com
Signed-off-by: Sasha Levin

iwlwifi: mvm: synchronize with FW after multicast commands

2022-01-27T08:19:42+00:00

[ Upstream commit db66abeea3aefed481391ecc564fb7b7fb31d742 ]

If userspace installs a lot of multicast groups very quickly, then
we may run out of command queue space as we send the updates in an
asynchronous fashion (due to locking concerns), and the CPU can
create them faster than the firmware can process them. This is true
even when mac80211 has a work struct that gets scheduled.

Fix this by synchronizing with the firmware after sending all those
commands - outside of the iteration we can send a synchronous echo
command that just has the effect of the CPU waiting for the prior
asynchronous commands to finish. This also will cause fewer of the
commands to be sent to the firmware overall, because the work will
only run once when rescheduled multiple times while it's running.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=213649
Suggested-by: Emmanuel Grumbach 
Reported-by: Maximilian Ernestus 
Signed-off-by: Johannes Berg 
Signed-off-by: Luca Coelho 
Link: https://lore.kernel.org/r/iwlwifi.20211204083238.51aea5b79ea4.I88a44798efda16e9fe480fb3e94224931d311b29@changeid
Signed-off-by: Luca Coelho 
Signed-off-by: Sasha Levin