linux-stable.git/drivers/net/wireless, branch v5.3.16 Linux kernel stable tree iwlwifi: pcie: don't consider IV len in A-MSDU 2019-12-13T07:48:30+00:00 Mordechay Goodstein mordechay.goodstein@intel.com 2019-11-07T11:51:47+00:00 d939c419cfebdd8280897d6f6fd5d7a6220a37a6 [ Upstream commit cb1a4badf59275eb7221dcec621e8154917eabd1 ] From gen2 PN is totally offloaded to hardware (also the space for the IV isn't part of the skb). As you can see in mvm/mac80211.c:3545, the MAC for cipher types CCMP/GCMP doesn't set IEEE80211_KEY_FLAG_PUT_IV_SPACE for gen2 NICs. This causes all the AMSDU data to be corrupted with cipher enabled. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit cb1a4badf59275eb7221dcec621e8154917eabd1 ]

From gen2 PN is totally offloaded to hardware (also the space for the
IV isn't part of the skb).  As you can see in mvm/mac80211.c:3545, the
MAC for cipher types CCMP/GCMP doesn't set
IEEE80211_KEY_FLAG_PUT_IV_SPACE for gen2 NICs.

This causes all the AMSDU data to be corrupted with cipher enabled.

Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
rsi: release skb if rsi_prepare_beacon fails 2019-12-13T07:48:15+00:00 Navid Emamdoost navid.emamdoost@gmail.com 2019-09-14T00:08:11+00:00 9c11993ad2542c314023f282efea363996b378a0 commit d563131ef23cbc756026f839a82598c8445bc45f upstream. In rsi_send_beacon, if rsi_prepare_beacon fails the allocated skb should be released. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit d563131ef23cbc756026f839a82598c8445bc45f upstream.

In rsi_send_beacon, if rsi_prepare_beacon fails the allocated skb should
be released.

Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ath9k_hw: fix uninitialized variable data 2019-11-29T09:07:55+00:00 Denis Efremov efremov@linux.com 2019-09-26T22:56:04+00:00 c690211e67f50cc8aa8a1f64762900a12f4b8fe7 commit 80e84f36412e0c5172447b6947068dca0d04ee82 upstream. Currently, data variable in ar9003_hw_thermo_cal_apply() could be uninitialized if ar9300_otp_read_word() will fail to read the value. Initialize data variable with 0 to prevent an undefined behavior. This will be enough to handle error case when ar9300_otp_read_word() fails. Fixes: 80fe43f2bbd5 ("ath9k_hw: Read and configure thermocal for AR9462") Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: stable@vger.kernel.org Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 80e84f36412e0c5172447b6947068dca0d04ee82 upstream.

Currently, data variable in ar9003_hw_thermo_cal_apply() could be
uninitialized if ar9300_otp_read_word() will fail to read the value.
Initialize data variable with 0 to prevent an undefined behavior. This
will be enough to handle error case when ar9300_otp_read_word() fails.

Fixes: 80fe43f2bbd5 ("ath9k_hw: Read and configure thermocal for AR9462")
Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Cc: John W. Linville <linville@tuxdriver.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: stable@vger.kernel.org
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ath10k: Fix a NULL-ptr-deref bug in ath10k_usb_alloc_urb_from_pipe 2019-11-29T09:07:54+00:00 Hui Peng benquike@gmail.com 2019-10-19T11:42:23+00:00 bb211b52f576b14e12d44a57e4f7dc86145d063e commit bfd6e6e6c5d2ee43a3d9902b36e01fc7527ebb27 upstream. The `ar_usb` field of `ath10k_usb_pipe_usb_pipe` objects are initialized to point to the containing `ath10k_usb` object according to endpoint descriptors read from the device side, as shown below in `ath10k_usb_setup_pipe_resources`: for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { endpoint = &iface_desc->endpoint[i].desc; // get the address from endpoint descriptor pipe_num = ath10k_usb_get_logical_pipe_num(ar_usb, endpoint->bEndpointAddress, &urbcount); ...... // select the pipe object pipe = &ar_usb->pipes[pipe_num]; // initialize the ar_usb field pipe->ar_usb = ar_usb; } The driver assumes that the addresses reported in endpoint descriptors from device side to be complete. If a device is malicious and does not report complete addresses, it may trigger NULL-ptr-deref `ath10k_usb_alloc_urb_from_pipe` and `ath10k_usb_free_urb_to_pipe`. This patch fixes the bug by preventing potential NULL-ptr-deref. Signed-off-by: Hui Peng <benquike@gmail.com> Reported-by: Hui Peng <benquike@gmail.com> Reported-by: Mathias Payer <mathias.payer@nebelwelt.net> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [groeck: Add driver tag to subject, fix build warning] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit bfd6e6e6c5d2ee43a3d9902b36e01fc7527ebb27 upstream.

The `ar_usb` field of `ath10k_usb_pipe_usb_pipe` objects
are initialized to point to the containing `ath10k_usb` object
according to endpoint descriptors read from the device side, as shown
below in `ath10k_usb_setup_pipe_resources`:

for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
        endpoint = &iface_desc->endpoint[i].desc;

        // get the address from endpoint descriptor
        pipe_num = ath10k_usb_get_logical_pipe_num(ar_usb,
                                                endpoint->bEndpointAddress,
                                                &urbcount);
        ......
        // select the pipe object
        pipe = &ar_usb->pipes[pipe_num];

        // initialize the ar_usb field
        pipe->ar_usb = ar_usb;
}

The driver assumes that the addresses reported in endpoint
descriptors from device side  to be complete. If a device is
malicious and does not report complete addresses, it may trigger
NULL-ptr-deref `ath10k_usb_alloc_urb_from_pipe` and
`ath10k_usb_free_urb_to_pipe`.

This patch fixes the bug by preventing potential NULL-ptr-deref.

Signed-off-by: Hui Peng <benquike@gmail.com>
Reported-by: Hui Peng <benquike@gmail.com>
Reported-by: Mathias Payer <mathias.payer@nebelwelt.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[groeck: Add driver tag to subject, fix build warning]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ath10k: Fix HOST capability QMI incompatibility 2019-11-29T09:07:54+00:00 Bjorn Andersson bjorn.andersson@linaro.org 2019-07-25T06:31:08+00:00 ba91e59f4fd6c910a2cf213f7bb623363d150b4f commit 7165ef890a4c44cf16db66b82fd78448f4bde6ba upstream. The introduction of 768ec4c012ac ("ath10k: update HOST capability QMI message") served the purpose of supporting the new and extended HOST capability QMI message. But while the new message adds a slew of optional members it changes the data type of the "daemon_support" member, which means that older versions of the firmware will fail to decode the incoming request message. There is no way to detect this breakage from Linux and there's no way to recover from sending the wrong message (i.e. we can't just try one format and then fallback to the other), so a quirk is introduced in DeviceTree to indicate to the driver that the firmware requires the 8bit version of this message. Cc: stable@vger.kernel.org Fixes: 768ec4c012ac ("ath10k: update HOST capability qmi message") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 7165ef890a4c44cf16db66b82fd78448f4bde6ba upstream.

The introduction of 768ec4c012ac ("ath10k: update HOST capability QMI
message") served the purpose of supporting the new and extended HOST
capability QMI message.

But while the new message adds a slew of optional members it changes the
data type of the "daemon_support" member, which means that older
versions of the firmware will fail to decode the incoming request
message.

There is no way to detect this breakage from Linux and there's no way to
recover from sending the wrong message (i.e. we can't just try one
format and then fallback to the other), so a quirk is introduced in
DeviceTree to indicate to the driver that the firmware requires the 8bit
version of this message.

Cc: stable@vger.kernel.org
Fixes: 768ec4c012ac ("ath10k: update HOST capability qmi message")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ath10k: restore QCA9880-AR1A (v1) detection 2019-11-29T09:07:53+00:00 Christian Lamparter chunkeey@gmail.com 2019-09-06T21:54:23+00:00 582523fbe21aa211743106cb448c22d84f80354d commit f8914a14623a79b73f72b2b1ee4cd9b2cb91b735 upstream. This patch restores the old behavior that read the chip_id on the QCA988x before resetting the chip. This needs to be done in this order since the unsupported QCA988x AR1A chips fall off the bus when resetted. Otherwise the next MMIO Op after the reset causes a BUS ERROR and panic. Cc: stable@vger.kernel.org Fixes: 1a7fecb766c8 ("ath10k: reset chip before reading chip_id in probe") Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit f8914a14623a79b73f72b2b1ee4cd9b2cb91b735 upstream.

This patch restores the old behavior that read
the chip_id on the QCA988x before resetting the
chip. This needs to be done in this order since
the unsupported QCA988x AR1A chips fall off the
bus when resetted. Otherwise the next MMIO Op
after the reset causes a BUS ERROR and panic.

Cc: stable@vger.kernel.org
Fixes: 1a7fecb766c8 ("ath10k: reset chip before reading chip_id in probe")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mt76: dma: fix buffer unmap with non-linear skbs 2019-11-12T18:28:11+00:00 Lorenzo Bianconi lorenzo@kernel.org 2019-10-27T19:53:09+00:00 bb3d9654cec1e0a05f9ded57fcf48e17bd32abde [ Upstream commit 7bd0650be63cbb9e45e394d689c81365fe48e495 ] mt76 dma layer is supposed to unmap skb data buffers while keep txwi mapped on hw dma ring. At the moment mt76 wrongly unmap txwi or does not unmap data fragments in even positions for non-linear skbs. This issue may result in hw hangs with A-MSDU if the system relies on IOMMU or SWIOTLB. Fix this behaviour properly unmapping data fragments on non-linear skbs. Fixes: 17f1de56df05 ("mt76: add common code shared between multiple chipsets") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 7bd0650be63cbb9e45e394d689c81365fe48e495 ]

mt76 dma layer is supposed to unmap skb data buffers while keep txwi
mapped on hw dma ring. At the moment mt76 wrongly unmap txwi or does
not unmap data fragments in even positions for non-linear skbs. This
issue may result in hw hangs with A-MSDU if the system relies on IOMMU
or SWIOTLB. Fix this behaviour properly unmapping data fragments on
non-linear skbs.

Fixes: 17f1de56df05 ("mt76: add common code shared between multiple chipsets")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
virt_wifi: fix refcnt leak in module exit routine 2019-11-12T18:27:54+00:00 Taehee Yoo ap420073@gmail.com 2019-10-21T18:47:59+00:00 9b414f0c95f08e3c1e8193f31a1a5c6f94f661c2 [ Upstream commit 1962f86b42ed06ea6af9ff09390243b99d9eb83a ] virt_wifi_newlink() calls netdev_upper_dev_link() and it internally holds reference count of lower interface. Current code does not release a reference count of the lower interface when the lower interface is being deleted. So, reference count leaks occur. Test commands: ip link add dummy0 type dummy ip link add vw1 link dummy0 type virt_wifi ip link del dummy0 Splat looks like: [ 133.787526][ T788] WARNING: CPU: 1 PID: 788 at net/core/dev.c:8274 rollback_registered_many+0x835/0xc80 [ 133.788355][ T788] Modules linked in: virt_wifi cfg80211 dummy team af_packet sch_fq_codel ip_tables x_tables unix [ 133.789377][ T788] CPU: 1 PID: 788 Comm: ip Not tainted 5.4.0-rc3+ #96 [ 133.790069][ T788] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 133.791167][ T788] RIP: 0010:rollback_registered_many+0x835/0xc80 [ 133.791906][ T788] Code: 00 4d 85 ff 0f 84 b5 fd ff ff ba c0 0c 00 00 48 89 de 4c 89 ff e8 9b 58 04 00 48 89 df e8 30 [ 133.794317][ T788] RSP: 0018:ffff88805ba3f338 EFLAGS: 00010202 [ 133.795080][ T788] RAX: ffff88805e57e801 RBX: ffff88805ba34000 RCX: ffffffffa9294723 [ 133.796045][ T788] RDX: 1ffff1100b746816 RSI: 0000000000000008 RDI: ffffffffabcc4240 [ 133.797006][ T788] RBP: ffff88805ba3f4c0 R08: fffffbfff5798849 R09: fffffbfff5798849 [ 133.797993][ T788] R10: 0000000000000001 R11: fffffbfff5798848 R12: dffffc0000000000 [ 133.802514][ T788] R13: ffff88805ba3f440 R14: ffff88805ba3f400 R15: ffff88805ed622c0 [ 133.803237][ T788] FS: 00007f2e9608c0c0(0000) GS:ffff88806cc00000(0000) knlGS:0000000000000000 [ 133.804002][ T788] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 133.804664][ T788] CR2: 00007f2e95610603 CR3: 000000005f68c004 CR4: 00000000000606e0 [ 133.805363][ T788] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 133.806073][ T788] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 133.806787][ T788] Call Trace: [ 133.807069][ T788] ? generic_xdp_install+0x310/0x310 [ 133.807612][ T788] ? lock_acquire+0x164/0x3b0 [ 133.808077][ T788] ? is_bpf_text_address+0x5/0xf0 [ 133.808640][ T788] ? deref_stack_reg+0x9c/0xd0 [ 133.809138][ T788] ? __nla_validate_parse+0x98/0x1ab0 [ 133.809944][ T788] unregister_netdevice_many.part.122+0x13/0x1b0 [ 133.810599][ T788] rtnl_delete_link+0xbc/0x100 [ 133.811073][ T788] ? rtnl_af_register+0xc0/0xc0 [ 133.811672][ T788] rtnl_dellink+0x30e/0x8a0 [ 133.812205][ T788] ? is_bpf_text_address+0x5/0xf0 [ ... ] [ 144.110530][ T788] unregister_netdevice: waiting for dummy0 to become free. Usage count = 1 This patch adds notifier routine to delete upper interface before deleting lower interface. Fixes: c7cdba31ed8b ("mac80211-next: rtnetlink wifi simulation device") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 1962f86b42ed06ea6af9ff09390243b99d9eb83a ]

virt_wifi_newlink() calls netdev_upper_dev_link() and it internally
holds reference count of lower interface.

Current code does not release a reference count of the lower interface
when the lower interface is being deleted.
So, reference count leaks occur.

Test commands:
    ip link add dummy0 type dummy
    ip link add vw1 link dummy0 type virt_wifi
    ip link del dummy0

Splat looks like:
[  133.787526][  T788] WARNING: CPU: 1 PID: 788 at net/core/dev.c:8274 rollback_registered_many+0x835/0xc80
[  133.788355][  T788] Modules linked in: virt_wifi cfg80211 dummy team af_packet sch_fq_codel ip_tables x_tables unix
[  133.789377][  T788] CPU: 1 PID: 788 Comm: ip Not tainted 5.4.0-rc3+ #96
[  133.790069][  T788] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[  133.791167][  T788] RIP: 0010:rollback_registered_many+0x835/0xc80
[  133.791906][  T788] Code: 00 4d 85 ff 0f 84 b5 fd ff ff ba c0 0c 00 00 48 89 de 4c 89 ff e8 9b 58 04 00 48 89 df e8 30
[  133.794317][  T788] RSP: 0018:ffff88805ba3f338 EFLAGS: 00010202
[  133.795080][  T788] RAX: ffff88805e57e801 RBX: ffff88805ba34000 RCX: ffffffffa9294723
[  133.796045][  T788] RDX: 1ffff1100b746816 RSI: 0000000000000008 RDI: ffffffffabcc4240
[  133.797006][  T788] RBP: ffff88805ba3f4c0 R08: fffffbfff5798849 R09: fffffbfff5798849
[  133.797993][  T788] R10: 0000000000000001 R11: fffffbfff5798848 R12: dffffc0000000000
[  133.802514][  T788] R13: ffff88805ba3f440 R14: ffff88805ba3f400 R15: ffff88805ed622c0
[  133.803237][  T788] FS:  00007f2e9608c0c0(0000) GS:ffff88806cc00000(0000) knlGS:0000000000000000
[  133.804002][  T788] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  133.804664][  T788] CR2: 00007f2e95610603 CR3: 000000005f68c004 CR4: 00000000000606e0
[  133.805363][  T788] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  133.806073][  T788] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  133.806787][  T788] Call Trace:
[  133.807069][  T788]  ? generic_xdp_install+0x310/0x310
[  133.807612][  T788]  ? lock_acquire+0x164/0x3b0
[  133.808077][  T788]  ? is_bpf_text_address+0x5/0xf0
[  133.808640][  T788]  ? deref_stack_reg+0x9c/0xd0
[  133.809138][  T788]  ? __nla_validate_parse+0x98/0x1ab0
[  133.809944][  T788]  unregister_netdevice_many.part.122+0x13/0x1b0
[  133.810599][  T788]  rtnl_delete_link+0xbc/0x100
[  133.811073][  T788]  ? rtnl_af_register+0xc0/0xc0
[  133.811672][  T788]  rtnl_dellink+0x30e/0x8a0
[  133.812205][  T788]  ? is_bpf_text_address+0x5/0xf0
[ ... ]

[  144.110530][  T788] unregister_netdevice: waiting for dummy0 to become free. Usage count = 1

This patch adds notifier routine to delete upper interface before deleting
lower interface.

Fixes: c7cdba31ed8b ("mac80211-next: rtnetlink wifi simulation device")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
iwlwifi: pcie: 0x2720 is qu and 0x30DC is not 2019-11-12T18:27:48+00:00 Luca Coelho luciano.coelho@intel.com 2019-10-19T10:03:31+00:00 d4c27320c89be036cd6a31b6a2fec010c6f17822 [ Upstream commit 17c216ed6b9eef34e647192063f6149d33eff579 ] When converting the wrong qu configurations in an earlier commit, I accidentally swapped 0x2720 and 0x30DC. Instead of converting 0x2720, I converted 0x30DC. Undo 0x30DC and convert 0x2720. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 17c216ed6b9eef34e647192063f6149d33eff579 ]

When converting the wrong qu configurations in an earlier commit, I
accidentally swapped 0x2720 and 0x30DC.  Instead of converting 0x2720,
I converted 0x30DC.  Undo 0x30DC and convert 0x2720.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
iwlwifi: pcie: fix all 9460 entries for qnj 2019-11-12T18:27:47+00:00 Luca Coelho luciano.coelho@intel.com 2019-10-19T10:03:28+00:00 b6a33a44d7fa0b7a55f511d3c0ec9bd70e82a055 [ Upstream commit e55890150a961944e861a46efc8599f80f25de76 ] A bunch of the entries for qnj were wrong. The 9460 device doesn't exist, so update them to 9461 and 9462. There are still a bunch of other occurrences of 9460, but that will be fixed separately. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit e55890150a961944e861a46efc8599f80f25de76 ]

A bunch of the entries for qnj were wrong.  The 9460 device doesn't
exist, so update them to 9461 and 9462.  There are still a bunch of
other occurrences of 9460, but that will be fixed separately.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>