linux-stable.git/drivers/net/wireless, branch v4.9.40

wlcore: fix 64K page support

2017-07-27T22:07:58+00:00

commit 4a4274bf2dbbd1c7a45be0c89a1687c9d2eef4a0 upstream.

In the stable linux-3.16 branch, I ran into a warning in the
wlcore driver:

drivers/net/wireless/ti/wlcore/spi.c: In function 'wl12xx_spi_raw_write':
drivers/net/wireless/ti/wlcore/spi.c:315:1: error: the frame size of 12848 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]

Newer kernels no longer show the warning, but the bug is still there,
as the allocation is based on the CPU page size rather than the
actual capabilities of the hardware.

This replaces the PAGE_SIZE macro with the SZ_4K macro, i.e. 4096 bytes
per buffer.

Signed-off-by: Arnd Bergmann 
Signed-off-by: Kalle Valo 
Signed-off-by: Greg Kroah-Hartman

ath9k: fix an invalid pointer dereference in ath9k_rng_stop()

2017-07-27T22:07:55+00:00

commit 07246c115801c27652700e3679bb58661ef7ed65 upstream.

The bug was triggered when do suspend/resuming continuously
on Dell XPS L322X/0PJHXN version 9333 (2013) with kernel
4.12.0-041200rc4-generic. But can't reproduce on DELL
E5440 + AR9300 PCIE chips.

The warning is caused by accessing invalid pointer sc->rng_task.
sc->rng_task is not be cleared after kthread_stop(sc->rng_task)
be called in ath9k_rng_stop(). Because the kthread is stopped
before ath9k_rng_kthread() be scheduled.

So set sc->rng_task to null after kthread_stop(sc->rng_task) to
resolve this issue.

WARNING: CPU: 0 PID: 984 at linux/kernel/kthread.c:71 kthread_stop+0xf1/0x100
CPU: 0 PID: 984 Comm: NetworkManager Not tainted 4.12.0-041200rc4-generic #201706042031
Hardware name: Dell Inc.          Dell System XPS L322X/0PJHXN, BIOS A09 05/15/2013
task: ffff950170fdda00 task.stack: ffffa22c01538000
RIP: 0010:kthread_stop+0xf1/0x100
RSP: 0018:ffffa22c0153b5b0 EFLAGS: 00010246
RAX: ffffffffa6257800 RBX: ffff950171b79560 RCX: 0000000000000000
RDX: 0000000080000000 RSI: 000000007fffffff RDI: ffff9500ac9a9680
RBP: ffffa22c0153b5c8 R08: 0000000000000000 R09: 0000000000000000
R10: ffffa22c0153b648 R11: ffff9501768004b8 R12: ffff9500ac9a9680
R13: ffff950171b79f70 R14: ffff950171b78780 R15: ffff9501749dc018
FS:  00007f0d6bfd5540(0000) GS:ffff95017f200000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fc190161a08 CR3: 0000000232906000 CR4: 00000000001406f0
Call Trace:
  ath9k_rng_stop+0x1a/0x20 [ath9k]
  ath9k_stop+0x3b/0x1d0 [ath9k]
  drv_stop+0x33/0xf0 [mac80211]
  ieee80211_stop_device+0x43/0x50 [mac80211]
  ieee80211_do_stop+0x4f2/0x810 [mac80211]

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196043
Reported-by: Giulio Genovese 
Tested-by: Giulio Genovese 
Signed-off-by: Miaoqing Pan 
Signed-off-by: Kalle Valo 
Signed-off-by: Greg Kroah-Hartman

ath9k: fix tx99 bus error

2017-07-27T22:07:55+00:00

commit bde717ab473668377fc65872398a102d40cb2d58 upstream.

The hard coded register 0x9864 and 0x9924 are invalid
for ar9300 chips.

Signed-off-by: Miaoqing Pan 
Signed-off-by: Kalle Valo 
Signed-off-by: Greg Kroah-Hartman

ath9k: fix tx99 use after free

2017-07-27T22:07:55+00:00

commit cf8ce1ea61b75712a154c93e40f2a5af2e4dd997 upstream.

One scenario that could lead to UAF is two threads writing
simultaneously to the "tx99" debug file. One of them would
set the "start" value to true and follow to ath9k_tx99_init().
Inside the function it would set the sc->tx99_state to true
after allocating sc->tx99skb. Then, the other thread would
execute write_file_tx99() and call ath9k_tx99_deinit().
sc->tx99_state would be freed. After that, the first thread
would continue inside ath9k_tx99_init() and call
r = ath9k_tx99_send(sc, sc->tx99_skb, &txctl);
that would make use of the freed sc->tx99_skb memory.

Signed-off-by: Miaoqing Pan 
Signed-off-by: Kalle Valo 
Signed-off-by: Greg Kroah-Hartman

brcmfmac: Fix glom_skb leak in brcmf_sdiod_recv_chain

2017-07-21T05:42:19+00:00

commit 5ea59db8a375216e6c915c5586f556766673b5a7 upstream.

An earlier change to this function (3bdae810721b) fixed a leak in the
case of an unsuccessful call to brcmf_sdiod_buffrw(). However, the
glom_skb buffer, used for emulating a scattering read, is never used
or referenced after its contents are copied into the destination
buffers, and therefore always needs to be freed by the end of the
function.

Fixes: 3bdae810721b ("brcmfmac: Fix glob_skb leak in brcmf_sdiod_recv_chain")
Fixes: a413e39a38573 ("brcmfmac: fix brcmf_sdcard_recv_chain() for host without sg support")
Signed-off-by: Peter S. Housel 
Signed-off-by: Arend van Spriel 
Signed-off-by: Kalle Valo 
Signed-off-by: Greg Kroah-Hartman

brcmfmac: Fix a memory leak in error handling path in 'brcmf_cfg80211_attach'

2017-07-21T05:42:19+00:00

commit 57c00f2fac512837f8de73474ec1f54020015bae upstream.

If 'wiphy_new()' fails, we leak 'ops'. Add a new label in the error
handling path to free it in such a case.

Fixes: 5c22fb85102a7 ("brcmfmac: add wowl gtk rekeying offload support")
Signed-off-by: Christophe JAILLET 
Signed-off-by: Kalle Valo 
Signed-off-by: Greg Kroah-Hartman

brcmfmac: fix possible buffer overflow in brcmf_cfg80211_mgmt_tx()

2017-07-21T05:42:19+00:00

commit 8f44c9a41386729fea410e688959ddaa9d51be7c upstream.

The lower level nl80211 code in cfg80211 ensures that "len" is between
25 and NL80211_ATTR_FRAME (2304).  We subtract DOT11_MGMT_HDR_LEN (24) from
"len" so thats's max of 2280.  However, the action_frame->data[] buffer is
only BRCMF_FIL_ACTION_FRAME_SIZE (1800) bytes long so this memcpy() can
overflow.

	memcpy(action_frame->data, &buf[DOT11_MGMT_HDR_LEN],
	       le16_to_cpu(action_frame->len));

Fixes: 18e2f61db3b70 ("brcmfmac: P2P action frame tx.")
Reported-by: "freenerguo(郭大兴)" 
Signed-off-by: Arend van Spriel 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

ath10k: override CE5 config for QCA9377

2017-07-12T13:01:06+00:00

commit b08b5b53a1ed2bd7a883f8fd29232c8f03604671 upstream.

Similarly to QCA6174, QCA9377 requires the CE5 configuration to be
available for other feature. Use the ath10k_pci_override_ce_config()
for it as well.

This is required for TF2.0 firmware. Previous FW revisions were
working fine without this patch.

Fixes: a70587b3389a ("ath10k: configure copy engine 5 for HTT messages")
Signed-off-by: Bartosz Markowski 
Signed-off-by: Kalle Valo 
Signed-off-by: Greg Kroah-Hartman

mac80211_hwsim: Replace bogus hrtimer clockid

2017-07-12T13:01:03+00:00

commit 8fbcfeb8a9cc803464d6c166e7991913711c612c upstream.

mac80211_hwsim initializes a hrtimer with clockid
CLOCK_MONOTONIC_RAW. That's not supported.

Use CLOCK_MONOTONIC instead.

Signed-off-by: Thomas Gleixner 
Signed-off-by: Johannes Berg 
Signed-off-by: Greg Kroah-Hartman

brcmfmac: avoid writing channel out of allocated array

2017-07-05T12:40:30+00:00

commit 77c0d0cd10e793989d1e8b835a9a09694182cb39 upstream.

Our code was assigning number of channels to the index variable by
default. If firmware reported channel we didn't predict this would
result in using that initial index value and writing out of array. This
never happened so far (we got a complete list of supported channels) but
it means possible memory corruption so we should handle it anyway.

This patch simply detects unexpected channel and ignores it.

As we don't try to create new entry now, it's also safe to drop hw_value
and center_freq assignment. For known channels we have these set anyway.

I decided to fix this issue by assigning NULL or a target channel to the
channel variable. This was one of possible ways, I prefefred this one as
it also avoids using channel[index] over and over.

Fixes: 58de92d2f95e ("brcmfmac: use static superset of channels for wiphy bands")
Signed-off-by: Rafał Miłecki 
Acked-by: Arend van Spriel 
Signed-off-by: Kalle Valo 
Signed-off-by: Greg Kroah-Hartman