linux-stable.git/drivers/net/wireless, branch v4.4.259

b43: N-PHY: Fix the update of coef for the PHY revision >= 3case

2021-03-03T15:44:16+00:00

[ Upstream commit 4773acf3d4b50768bf08e9e97a204819e9ea0895 ]

The documentation for the PHY update [1] states:

Loop 4 times with index i

    If PHY Revision >= 3
        Copy table[i] to coef[i]
    Otherwise
        Set coef[i] to 0

the copy of the table to coef is currently implemented the wrong way
around, table is being updated from uninitialized values in coeff.
Fix this by swapping the assignment around.

[1] https://bcm-v4.sipsolutions.net/802.11/PHY/N/RestoreCal/

Fixes: 2f258b74d13c ("b43: N-PHY: implement restoring general configuration")
Addresses-Coverity: ("Uninitialized scalar variable")
Signed-off-by: Colin Ian King 
Acked-by: Larry Finger 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

iwlwifi: mvm: guard against device removal in reprobe

2021-02-23T12:58:12+00:00

[ Upstream commit 7a21b1d4a728a483f07c638ccd8610d4b4f12684 ]

If we get into a problem severe enough to attempt a reprobe,
we schedule a worker to do that. However, if the problem gets
more severe and the device is actually destroyed before this
worker has a chance to run, we use a free device. Bump up the
reference count of the device until the worker runs to avoid
this situation.

Signed-off-by: Johannes Berg 
Signed-off-by: Luca Coelho 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/iwlwifi.20210122144849.871f0892e4b2.I94819e11afd68d875f3e242b98bef724b8236f1e@changeid
Signed-off-by: Sasha Levin

iwlwifi: pcie: add a NULL check in iwl_pcie_txq_unmap

2021-02-23T12:58:12+00:00

[ Upstream commit 98c7d21f957b10d9c07a3a60a3a5a8f326a197e5 ]

I hit a NULL pointer exception in this function when the
init flow went really bad.

Signed-off-by: Emmanuel Grumbach 
Signed-off-by: Luca Coelho 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/iwlwifi.20210115130252.2e8da9f2c132.I0234d4b8ddaf70aaa5028a20c863255e05bc1f84@changeid
Signed-off-by: Sasha Levin

mt7601u: fix rx buffer refcounting

2021-02-03T22:16:15+00:00

commit d24c790577ef01bfa01da2b131313a38c843a634 upstream.

Fix the following crash due to erroneous page refcounting:

[   32.445919] BUG: Bad page state in process swapper/1  pfn:11f65a
[   32.447409] page:00000000938f0632 refcount:0 mapcount:-128 mapping:0000000000000000 index:0x0 pfn:0x11f65a
[   32.449605] flags: 0x8000000000000000()
[   32.450421] raw: 8000000000000000 ffffffff825b0148 ffffea00045ae988 0000000000000000
[   32.451795] raw: 0000000000000000 0000000000000001 00000000ffffff7f 0000000000000000
[   32.452999] page dumped because: nonzero mapcount
[   32.453888] Modules linked in:
[   32.454492] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.11.0-rc2+ #1976
[   32.455695] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-1.fc33 04/01/2014
[   32.457157] Call Trace:
[   32.457636]  
[   32.457993]  dump_stack+0x77/0x97
[   32.458576]  bad_page.cold+0x65/0x96
[   32.459198]  get_page_from_freelist+0x46a/0x11f0
[   32.460008]  __alloc_pages_nodemask+0x10a/0x2b0
[   32.460794]  mt7601u_rx_tasklet+0x651/0x720
[   32.461505]  tasklet_action_common.constprop.0+0x6b/0xd0
[   32.462343]  __do_softirq+0x152/0x46c
[   32.462928]  asm_call_irq_on_stack+0x12/0x20
[   32.463610]  
[   32.463953]  do_softirq_own_stack+0x5b/0x70
[   32.464582]  irq_exit_rcu+0x9f/0xe0
[   32.465028]  common_interrupt+0xae/0x1a0
[   32.465536]  asm_common_interrupt+0x1e/0x40
[   32.466071] RIP: 0010:default_idle+0x18/0x20
[   32.468981] RSP: 0018:ffffc90000077f00 EFLAGS: 00000246
[   32.469648] RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000
[   32.470550] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff81aac3dd
[   32.471463] RBP: ffff88810022ab00 R08: 0000000000000001 R09: 0000000000000001
[   32.472335] R10: 0000000000000046 R11: 0000000000005aa0 R12: 0000000000000000
[   32.473235] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[   32.474139]  ? default_idle_call+0x4d/0x200
[   32.474681]  default_idle_call+0x74/0x200
[   32.475192]  do_idle+0x1d5/0x250
[   32.475612]  cpu_startup_entry+0x19/0x20
[   32.476114]  secondary_startup_64_no_verify+0xb0/0xbb
[   32.476765] Disabling lock debugging due to kernel taint

Fixes: c869f77d6abb ("add mt7601u driver")
Co-developed-by: Felix Fietkau 
Signed-off-by: Felix Fietkau 
Signed-off-by: Lorenzo Bianconi 
Acked-by: Jakub Kicinski 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/62b2380c8c2091834cfad05e1059b55f945bd114.1610643952.git.lorenzo@kernel.org
Signed-off-by: Greg Kroah-Hartman

mt7601u: fix kernel crash unplugging the device

2021-02-03T22:16:15+00:00

commit 0acb20a5438c36e0cf2b8bf255f314b59fcca6ef upstream.

The following crash log can occur unplugging the usb dongle since,
after the urb poison in mt7601u_free_tx_queue(), usb_submit_urb() will
always fail resulting in a skb kfree while the skb has been already
queued.

Fix the issue enqueuing the skb only if usb_submit_urb() succeed.

Hardware name: Hewlett-Packard 500-539ng/2B2C, BIOS 80.06 04/01/2015
Workqueue: usb_hub_wq hub_event
RIP: 0010:skb_trim+0x2c/0x30
RSP: 0000:ffffb4c88005bba8 EFLAGS: 00010206
RAX: 000000004ad483ee RBX: ffff9a236625dee0 RCX: 000000000000662f
RDX: 000000000000000c RSI: 0000000000000000 RDI: ffff9a2343179300
RBP: ffff9a2343179300 R08: 0000000000000001 R09: 0000000000000000
R10: ffff9a23748f7840 R11: 0000000000000001 R12: ffff9a236625e4d4
R13: ffff9a236625dee0 R14: 0000000000001080 R15: 0000000000000008
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fd410a34ef8 CR3: 00000001416ee001 CR4: 00000000001706f0
Call Trace:
 mt7601u_tx_status+0x3e/0xa0 [mt7601u]
 mt7601u_dma_cleanup+0xca/0x110 [mt7601u]
 mt7601u_cleanup+0x22/0x30 [mt7601u]
 mt7601u_disconnect+0x22/0x60 [mt7601u]
 usb_unbind_interface+0x8a/0x270
 ? kernfs_find_ns+0x35/0xd0
 __device_release_driver+0x17a/0x230
 device_release_driver+0x24/0x30
 bus_remove_device+0xdb/0x140
 device_del+0x18b/0x430
 ? kobject_put+0x98/0x1d0
 usb_disable_device+0xc6/0x1f0
 usb_disconnect.cold+0x7e/0x20a
 hub_event+0xbf3/0x1870
 process_one_work+0x1b6/0x350
 worker_thread+0x53/0x3e0
 ? process_one_work+0x350/0x350
 kthread+0x11b/0x140
 ? __kthread_bind_mask+0x60/0x60
 ret_from_fork+0x22/0x30

Fixes: 23377c200b2eb ("mt7601u: fix possible memory leak when the device is disconnected")
Signed-off-by: Lorenzo Bianconi 
Acked-by: Jakub Kicinski 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/3b85219f669a63a8ced1f43686de05915a580489.1610919247.git.lorenzo@kernel.org
Signed-off-by: Greg Kroah-Hartman

wil6210: select CONFIG_CRC32

2021-01-17T12:55:14+00:00

commit e186620d7bf11b274b985b839c38266d7918cc05 upstream.

Without crc32, the driver fails to link:

arm-linux-gnueabi-ld: drivers/net/wireless/ath/wil6210/fw.o: in function `wil_fw_verify':
fw.c:(.text+0x74c): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/wireless/ath/wil6210/fw.o:fw.c:(.text+0x758): more undefined references to `crc32_le' follow

Fixes: 151a9706503f ("wil6210: firmware download")
Signed-off-by: Arnd Bergmann 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

mwifiex: Fix possible buffer overflows in mwifiex_cmd_802_11_ad_hoc_start

2021-01-09T12:34:16+00:00

[ Upstream commit 5c455c5ab332773464d02ba17015acdca198f03d ]

mwifiex_cmd_802_11_ad_hoc_start() calls memcpy() without checking
the destination size may trigger a buffer overflower,
which a local user could use to cause denial of service
or the execution of arbitrary code.
Fix it by putting the length check before calling memcpy().

Signed-off-by: Zhang Xiaohui 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/20201206084801.26479-1-ruc_zhangxiaohui@163.com
Signed-off-by: Sasha Levin

cw1200: fix missing destroy_workqueue() on error in cw1200_init_common

2020-12-29T12:42:37+00:00

[ Upstream commit 7ec8a926188eb8e7a3cbaca43ec44f2d7146d71b ]

Add the missing destroy_workqueue() before return from
cw1200_init_common in the error handling case.

Fixes: a910e4a94f69 ("cw1200: add driver for the ST-E CW1100 & CW1200 WLAN chipsets")
Reported-by: Hulk Robot 
Signed-off-by: Qinglang Miao 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/20201119070842.1011-1-miaoqinglang@huawei.com
Signed-off-by: Sasha Levin

orinoco: Move context allocation after processing the skb

2020-12-29T12:42:37+00:00

[ Upstream commit a31eb615646a63370aa1da1053c45439c7653d83 ]

ezusb_xmit() allocates a context which is leaked if
orinoco_process_xmit_skb() returns an error.

Move ezusb_alloc_ctx() after the invocation of
orinoco_process_xmit_skb() because the context is not needed so early.
ezusb_access_ltv() will cleanup the context in case of an error.

Fixes: bac6fafd4d6a0 ("orinoco: refactor xmit path")
Signed-off-by: Sebastian Andrzej Siewior 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/20201113212252.2243570-2-bigeasy@linutronix.de
Signed-off-by: Sasha Levin

ath9k_htc: Use appropriate rs_datalen type

2020-11-18T17:24:59+00:00

commit 5024f21c159f8c1668f581fff37140741c0b1ba9 upstream.

kernel test robot says:
drivers/net/wireless/ath/ath9k/htc_drv_txrx.c:987:20: sparse: warning: incorrect type in assignment (different base types)
drivers/net/wireless/ath/ath9k/htc_drv_txrx.c:987:20: sparse:    expected restricted __be16 [usertype] rs_datalen
drivers/net/wireless/ath/ath9k/htc_drv_txrx.c:987:20: sparse:    got unsigned short [usertype]
drivers/net/wireless/ath/ath9k/htc_drv_txrx.c:988:13: sparse: warning: restricted __be16 degrades to integer
drivers/net/wireless/ath/ath9k/htc_drv_txrx.c:1001:13: sparse: warning: restricted __be16 degrades to integer

Indeed rs_datalen has host byte order, so modify it's own type.

Reported-by: kernel test robot 
Fixes: cd486e627e67 ("ath9k_htc: Discard undersized packets")
Signed-off-by: Masashi Honma 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/20200808233258.4596-1-masashi.honma@gmail.com
Signed-off-by: Greg Kroah-Hartman