<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-stable.git/drivers/net/wireless, branch v4.4.232</title>
<subtitle>Linux kernel stable tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/'/>
<entry>
<title>ath9k: Fix regression with Atheros 9271</title>
<updated>2020-07-31T14:43:15+00:00</updated>
<author>
<name>Mark O'Donovan</name>
<email>shiftee@posteo.net</email>
</author>
<published>2020-07-11T04:33:24+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=6529b08ee5208d0ea6552e4540f6ab2c844cbad9'/>
<id>6529b08ee5208d0ea6552e4540f6ab2c844cbad9</id>
<content type='text'>
commit 92f53e2fda8bb9a559ad61d57bfb397ce67ed0ab upstream.

This fix allows ath9k_htc modules to connect to WLAN once again.

Fixes: 2bbcaaee1fcb ("ath9k: Fix general protection fault in ath9k_hif_usb_rx_cb")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=208251
Signed-off-by: Mark O'Donovan &lt;shiftee@posteo.net&gt;
Reported-by: Roman Mamedov &lt;rm@romanrm.net&gt;
Tested-by: Viktor Jägersküpper &lt;viktor_jaegerskuepper@freenet.de&gt;
Signed-off-by: Kalle Valo &lt;kvalo@codeaurora.org&gt;
Link: https://lore.kernel.org/r/20200711043324.8079-1-shiftee@posteo.net
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 92f53e2fda8bb9a559ad61d57bfb397ce67ed0ab upstream.

This fix allows ath9k_htc modules to connect to WLAN once again.

Fixes: 2bbcaaee1fcb ("ath9k: Fix general protection fault in ath9k_hif_usb_rx_cb")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=208251
Signed-off-by: Mark O'Donovan &lt;shiftee@posteo.net&gt;
Reported-by: Roman Mamedov &lt;rm@romanrm.net&gt;
Tested-by: Viktor Jägersküpper &lt;viktor_jaegerskuepper@freenet.de&gt;
Signed-off-by: Kalle Valo &lt;kvalo@codeaurora.org&gt;
Link: https://lore.kernel.org/r/20200711043324.8079-1-shiftee@posteo.net
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>ath9k: Fix general protection fault in ath9k_hif_usb_rx_cb</title>
<updated>2020-07-31T14:43:15+00:00</updated>
<author>
<name>Qiujun Huang</name>
<email>hqjagain@gmail.com</email>
</author>
<published>2020-04-04T04:18:38+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=8b105305b9424d90916efb3bfb69390e4b81c69e'/>
<id>8b105305b9424d90916efb3bfb69390e4b81c69e</id>
<content type='text'>
commit 2bbcaaee1fcbd83272e29f31e2bb7e70d8c49e05 upstream.

In ath9k_hif_usb_rx_cb interface number is assumed to be 0.
usb_ifnum_to_if(urb-&gt;dev, 0)
But it isn't always true.

The case reported by syzbot:
https://lore.kernel.org/linux-usb/000000000000666c9c05a1c05d12@google.com
usb 2-1: new high-speed USB device number 2 using dummy_hcd
usb 2-1: config 1 has an invalid interface number: 2 but max is 0
usb 2-1: config 1 has no interface number 0
usb 2-1: New USB device found, idVendor=0cf3, idProduct=9271, bcdDevice=
1.08
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
general protection fault, probably for non-canonical address
0xdffffc0000000015: 0000 [#1] SMP KASAN
KASAN: null-ptr-deref in range [0x00000000000000a8-0x00000000000000af]
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.6.0-rc5-syzkaller #0

Call Trace
__usb_hcd_giveback_urb+0x29a/0x550 drivers/usb/core/hcd.c:1650
usb_hcd_giveback_urb+0x368/0x420 drivers/usb/core/hcd.c:1716
dummy_timer+0x1258/0x32ae drivers/usb/gadget/udc/dummy_hcd.c:1966
call_timer_fn+0x195/0x6f0 kernel/time/timer.c:1404
expire_timers kernel/time/timer.c:1449 [inline]
__run_timers kernel/time/timer.c:1773 [inline]
__run_timers kernel/time/timer.c:1740 [inline]
run_timer_softirq+0x5f9/0x1500 kernel/time/timer.c:1786
__do_softirq+0x21e/0x950 kernel/softirq.c:292
invoke_softirq kernel/softirq.c:373 [inline]
irq_exit+0x178/0x1a0 kernel/softirq.c:413
exiting_irq arch/x86/include/asm/apic.h:546 [inline]
smp_apic_timer_interrupt+0x141/0x540 arch/x86/kernel/apic/apic.c:1146
apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:829

Reported-and-tested-by: syzbot+40d5d2e8a4680952f042@syzkaller.appspotmail.com
Signed-off-by: Qiujun Huang &lt;hqjagain@gmail.com&gt;
Signed-off-by: Kalle Valo &lt;kvalo@codeaurora.org&gt;
Link: https://lore.kernel.org/r/20200404041838.10426-6-hqjagain@gmail.com
Cc: Viktor Jägersküpper &lt;viktor_jaegerskuepper@freenet.de&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 2bbcaaee1fcbd83272e29f31e2bb7e70d8c49e05 upstream.

In ath9k_hif_usb_rx_cb interface number is assumed to be 0.
usb_ifnum_to_if(urb-&gt;dev, 0)
But it isn't always true.

The case reported by syzbot:
https://lore.kernel.org/linux-usb/000000000000666c9c05a1c05d12@google.com
usb 2-1: new high-speed USB device number 2 using dummy_hcd
usb 2-1: config 1 has an invalid interface number: 2 but max is 0
usb 2-1: config 1 has no interface number 0
usb 2-1: New USB device found, idVendor=0cf3, idProduct=9271, bcdDevice=
1.08
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
general protection fault, probably for non-canonical address
0xdffffc0000000015: 0000 [#1] SMP KASAN
KASAN: null-ptr-deref in range [0x00000000000000a8-0x00000000000000af]
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.6.0-rc5-syzkaller #0

Call Trace
__usb_hcd_giveback_urb+0x29a/0x550 drivers/usb/core/hcd.c:1650
usb_hcd_giveback_urb+0x368/0x420 drivers/usb/core/hcd.c:1716
dummy_timer+0x1258/0x32ae drivers/usb/gadget/udc/dummy_hcd.c:1966
call_timer_fn+0x195/0x6f0 kernel/time/timer.c:1404
expire_timers kernel/time/timer.c:1449 [inline]
__run_timers kernel/time/timer.c:1773 [inline]
__run_timers kernel/time/timer.c:1740 [inline]
run_timer_softirq+0x5f9/0x1500 kernel/time/timer.c:1786
__do_softirq+0x21e/0x950 kernel/softirq.c:292
invoke_softirq kernel/softirq.c:373 [inline]
irq_exit+0x178/0x1a0 kernel/softirq.c:413
exiting_irq arch/x86/include/asm/apic.h:546 [inline]
smp_apic_timer_interrupt+0x141/0x540 arch/x86/kernel/apic/apic.c:1146
apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:829

Reported-and-tested-by: syzbot+40d5d2e8a4680952f042@syzkaller.appspotmail.com
Signed-off-by: Qiujun Huang &lt;hqjagain@gmail.com&gt;
Signed-off-by: Kalle Valo &lt;kvalo@codeaurora.org&gt;
Link: https://lore.kernel.org/r/20200404041838.10426-6-hqjagain@gmail.com
Cc: Viktor Jägersküpper &lt;viktor_jaegerskuepper@freenet.de&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>Revert "ath9k: Fix general protection fault in ath9k_hif_usb_rx_cb"</title>
<updated>2020-07-22T07:10:02+00:00</updated>
<author>
<name>Greg Kroah-Hartman</name>
<email>gregkh@linuxfoundation.org</email>
</author>
<published>2020-07-14T12:03:44+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=e27a1e3d9c9ac453a94ab5646f7b92492a685c04'/>
<id>e27a1e3d9c9ac453a94ab5646f7b92492a685c04</id>
<content type='text'>
This reverts commit 90ecba9f1041f436ed2b35ba7a970c7cc5d0df23 which is
commit 2bbcaaee1fcbd83272e29f31e2bb7e70d8c49e05 upstream.

It is being reverted upstream, just hasn't made it there yet and is
causing lots of problems.

Reported-by: Hans de Goede &lt;hdegoede@redhat.com&gt;
Cc: Qiujun Huang &lt;hqjagain@gmail.com&gt;
Cc: Kalle Valo &lt;kvalo@codeaurora.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
This reverts commit 90ecba9f1041f436ed2b35ba7a970c7cc5d0df23 which is
commit 2bbcaaee1fcbd83272e29f31e2bb7e70d8c49e05 upstream.

It is being reverted upstream, just hasn't made it there yet and is
causing lots of problems.

Reported-by: Hans de Goede &lt;hdegoede@redhat.com&gt;
Cc: Qiujun Huang &lt;hqjagain@gmail.com&gt;
Cc: Kalle Valo &lt;kvalo@codeaurora.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>b43_legacy: Fix connection problem with WPA3</title>
<updated>2020-06-20T08:23:23+00:00</updated>
<author>
<name>Larry Finger</name>
<email>Larry.Finger@lwfinger.net</email>
</author>
<published>2020-05-26T15:59:09+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=95d30daefbbff46019cce40f9dc76672ed4f49ee'/>
<id>95d30daefbbff46019cce40f9dc76672ed4f49ee</id>
<content type='text'>
commit 6a29d134c04a8acebb7a95251acea7ad7abba106 upstream.

Since the driver was first introduced into the kernel, it has only
handled the ciphers associated with WEP, WPA, and WPA2. It fails with
WPA3 even though mac80211 can handle those additional ciphers in software,
b43legacy did not report that it could handle them. By setting MFP_CAPABLE using
ieee80211_set_hw(), the problem is fixed.

With this change, b43legacy will handle the ciphers it knows in hardware,
and let mac80211 handle the others in software. It is not necessary to
use the module parameter NOHWCRYPT to turn hardware encryption off.
Although this change essentially eliminates that module parameter,
I am choosing to keep it for cases where the hardware is broken,
and software encryption is required for all ciphers.

Signed-off-by: Larry Finger &lt;Larry.Finger@lwfinger.net&gt;
Cc: Stable &lt;stable@vger.kernel.org&gt;
Signed-off-by: Kalle Valo &lt;kvalo@codeaurora.org&gt;
Link: https://lore.kernel.org/r/20200526155909.5807-3-Larry.Finger@lwfinger.net
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 6a29d134c04a8acebb7a95251acea7ad7abba106 upstream.

Since the driver was first introduced into the kernel, it has only
handled the ciphers associated with WEP, WPA, and WPA2. It fails with
WPA3 even though mac80211 can handle those additional ciphers in software,
b43legacy did not report that it could handle them. By setting MFP_CAPABLE using
ieee80211_set_hw(), the problem is fixed.

With this change, b43legacy will handle the ciphers it knows in hardware,
and let mac80211 handle the others in software. It is not necessary to
use the module parameter NOHWCRYPT to turn hardware encryption off.
Although this change essentially eliminates that module parameter,
I am choosing to keep it for cases where the hardware is broken,
and software encryption is required for all ciphers.

Signed-off-by: Larry Finger &lt;Larry.Finger@lwfinger.net&gt;
Cc: Stable &lt;stable@vger.kernel.org&gt;
Signed-off-by: Kalle Valo &lt;kvalo@codeaurora.org&gt;
Link: https://lore.kernel.org/r/20200526155909.5807-3-Larry.Finger@lwfinger.net
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>b43: Fix connection problem with WPA3</title>
<updated>2020-06-20T08:23:23+00:00</updated>
<author>
<name>Larry Finger</name>
<email>Larry.Finger@lwfinger.net</email>
</author>
<published>2020-05-26T15:59:08+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=5ac0251d966a1d0abd7176af0ce9cb01b698304c'/>
<id>5ac0251d966a1d0abd7176af0ce9cb01b698304c</id>
<content type='text'>
commit 75d057bda1fbca6ade21378aa45db712e5f7d962 upstream.

Since the driver was first introduced into the kernel, it has only
handled the ciphers associated with WEP, WPA, and WPA2. It fails with
WPA3 even though mac80211 can handle those additional ciphers in software,
b43 did not report that it could handle them. By setting MFP_CAPABLE using
ieee80211_set_hw(), the problem is fixed.

With this change, b43 will handle the ciphers it knows in hardware,
and let mac80211 handle the others in software. It is not necessary to
use the module parameter NOHWCRYPT to turn hardware encryption off.
Although this change essentially eliminates that module parameter,
I am choosing to keep it for cases where the hardware is broken,
and software encryption is required for all ciphers.

Reported-and-tested-by: Rui Salvaterra &lt;rsalvaterra@gmail.com&gt;
Signed-off-by: Larry Finger &lt;Larry.Finger@lwfinger.net&gt;
Cc: Stable &lt;stable@vger.kernel.org&gt;
Signed-off-by: Kalle Valo &lt;kvalo@codeaurora.org&gt;
Link: https://lore.kernel.org/r/20200526155909.5807-2-Larry.Finger@lwfinger.net
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 75d057bda1fbca6ade21378aa45db712e5f7d962 upstream.

Since the driver was first introduced into the kernel, it has only
handled the ciphers associated with WEP, WPA, and WPA2. It fails with
WPA3 even though mac80211 can handle those additional ciphers in software,
b43 did not report that it could handle them. By setting MFP_CAPABLE using
ieee80211_set_hw(), the problem is fixed.

With this change, b43 will handle the ciphers it knows in hardware,
and let mac80211 handle the others in software. It is not necessary to
use the module parameter NOHWCRYPT to turn hardware encryption off.
Although this change essentially eliminates that module parameter,
I am choosing to keep it for cases where the hardware is broken,
and software encryption is required for all ciphers.

Reported-and-tested-by: Rui Salvaterra &lt;rsalvaterra@gmail.com&gt;
Signed-off-by: Larry Finger &lt;Larry.Finger@lwfinger.net&gt;
Cc: Stable &lt;stable@vger.kernel.org&gt;
Signed-off-by: Kalle Valo &lt;kvalo@codeaurora.org&gt;
Link: https://lore.kernel.org/r/20200526155909.5807-2-Larry.Finger@lwfinger.net
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>b43legacy: Fix case where channel status is corrupted</title>
<updated>2020-06-20T08:23:23+00:00</updated>
<author>
<name>Larry Finger</name>
<email>Larry.Finger@lwfinger.net</email>
</author>
<published>2020-04-07T19:00:43+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=28f56fab07a215abfebe04bf31ff53ae52a76167'/>
<id>28f56fab07a215abfebe04bf31ff53ae52a76167</id>
<content type='text'>
commit ec4d3e3a054578de34cd0b587ab8a1ac36f629d9 upstream.

This patch fixes commit 75388acd0cd8 ("add mac80211-based driver for
legacy BCM43xx devices")

In https://bugzilla.kernel.org/show_bug.cgi?id=207093, a defect in
b43legacy is reported. Upon testing, thus problem exists on PPC and
X86 platforms, is present in the oldest kernel tested (3.2), and
has been present in the driver since it was first added to the kernel.

The problem is a corrupted channel status received from the device.
Both the internal card in a PowerBook G4 and the PCMCIA version
(Broadcom BCM4306 with PCI ID 14e4:4320) have the problem. Only Rev, 2
(revision 4 of the 802.11 core) of the chip has been tested. No other
devices using b43legacy are available for testing.

Various sources of the problem were considered. Buffer overrun and
other sources of corruption within the driver were rejected because
the faulty channel status is always the same, not a random value.
It was concluded that the faulty data is coming from the device, probably
due to a firmware bug. As that source is not available, the driver
must take appropriate action to recover.

At present, the driver reports the error, and them continues to process
the bad packet. This is believed that to be a mistake, and the correct
action is to drop the correpted packet.

Fixes: 75388acd0cd8 ("add mac80211-based driver for legacy BCM43xx devices")
Cc: Stable &lt;stable@vger.kernel.org&gt;
Signed-off-by: Larry Finger &lt;Larry.Finger@lwfinger.net&gt;
Reported-and-tested by: F. Erhard &lt;erhard_f@mailbox.org&gt;
Signed-off-by: Kalle Valo &lt;kvalo@codeaurora.org&gt;
Link: https://lore.kernel.org/r/20200407190043.1686-1-Larry.Finger@lwfinger.net
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit ec4d3e3a054578de34cd0b587ab8a1ac36f629d9 upstream.

This patch fixes commit 75388acd0cd8 ("add mac80211-based driver for
legacy BCM43xx devices")

In https://bugzilla.kernel.org/show_bug.cgi?id=207093, a defect in
b43legacy is reported. Upon testing, thus problem exists on PPC and
X86 platforms, is present in the oldest kernel tested (3.2), and
has been present in the driver since it was first added to the kernel.

The problem is a corrupted channel status received from the device.
Both the internal card in a PowerBook G4 and the PCMCIA version
(Broadcom BCM4306 with PCI ID 14e4:4320) have the problem. Only Rev, 2
(revision 4 of the 802.11 core) of the chip has been tested. No other
devices using b43legacy are available for testing.

Various sources of the problem were considered. Buffer overrun and
other sources of corruption within the driver were rejected because
the faulty channel status is always the same, not a random value.
It was concluded that the faulty data is coming from the device, probably
due to a firmware bug. As that source is not available, the driver
must take appropriate action to recover.

At present, the driver reports the error, and them continues to process
the bad packet. This is believed that to be a mistake, and the correct
action is to drop the correpted packet.

Fixes: 75388acd0cd8 ("add mac80211-based driver for legacy BCM43xx devices")
Cc: Stable &lt;stable@vger.kernel.org&gt;
Signed-off-by: Larry Finger &lt;Larry.Finger@lwfinger.net&gt;
Reported-and-tested by: F. Erhard &lt;erhard_f@mailbox.org&gt;
Signed-off-by: Kalle Valo &lt;kvalo@codeaurora.org&gt;
Link: https://lore.kernel.org/r/20200407190043.1686-1-Larry.Finger@lwfinger.net
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>carl9170: remove P2P_GO support</title>
<updated>2020-06-20T08:23:23+00:00</updated>
<author>
<name>Christian Lamparter</name>
<email>chunkeey@gmail.com</email>
</author>
<published>2020-05-05T07:42:09+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=ca9cc955d7e74843f9dafea2130c83ffc5908655'/>
<id>ca9cc955d7e74843f9dafea2130c83ffc5908655</id>
<content type='text'>
commit b14fba7ebd04082f7767a11daea7f12f3593de22 upstream.

This patch follows up on a bug-report by Frank Schäfer that
discovered P2P GO wasn't working with wpa_supplicant.
This patch removes part of the broken P2P GO support but
keeps the vif switchover code in place.

Cc: &lt;stable@vger.kernel.org&gt;
Link: &lt;https://lkml.kernel.org/r/3a9d86b6-744f-e670-8792-9167257edef8@googlemail.com&gt;
Reported-by: Frank Schäfer &lt;fschaefer.oss@googlemail.com&gt;
Signed-off-by: Christian Lamparter &lt;chunkeey@gmail.com&gt;
Signed-off-by: Kalle Valo &lt;kvalo@codeaurora.org&gt;
Link: https://lore.kernel.org/r/20200425092811.9494-1-chunkeey@gmail.com
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit b14fba7ebd04082f7767a11daea7f12f3593de22 upstream.

This patch follows up on a bug-report by Frank Schäfer that
discovered P2P GO wasn't working with wpa_supplicant.
This patch removes part of the broken P2P GO support but
keeps the vif switchover code in place.

Cc: &lt;stable@vger.kernel.org&gt;
Link: &lt;https://lkml.kernel.org/r/3a9d86b6-744f-e670-8792-9167257edef8@googlemail.com&gt;
Reported-by: Frank Schäfer &lt;fschaefer.oss@googlemail.com&gt;
Signed-off-by: Christian Lamparter &lt;chunkeey@gmail.com&gt;
Signed-off-by: Kalle Valo &lt;kvalo@codeaurora.org&gt;
Link: https://lore.kernel.org/r/20200425092811.9494-1-chunkeey@gmail.com
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>mwifiex: Fix memory corruption in dump_station</title>
<updated>2020-06-20T08:23:21+00:00</updated>
<author>
<name>Pali Rohár</name>
<email>pali@kernel.org</email>
</author>
<published>2020-05-15T07:59:24+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=ea4031568c75cdb5780a83cd336223a436e76671'/>
<id>ea4031568c75cdb5780a83cd336223a436e76671</id>
<content type='text'>
[ Upstream commit 3aa42bae9c4d1641aeb36f1a8585cd1d506cf471 ]

The mwifiex_cfg80211_dump_station() uses static variable for iterating
over a linked list of all associated stations (when the driver is in UAP
role). This has a race condition if .dump_station is called in parallel
for multiple interfaces. This corruption can be triggered by registering
multiple SSIDs and calling, in parallel for multiple interfaces
    iw dev &lt;iface&gt; station dump

[16750.719775] Unable to handle kernel paging request at virtual address dead000000000110
...
[16750.899173] Call trace:
[16750.901696]  mwifiex_cfg80211_dump_station+0x94/0x100 [mwifiex]
[16750.907824]  nl80211_dump_station+0xbc/0x278 [cfg80211]
[16750.913160]  netlink_dump+0xe8/0x320
[16750.916827]  netlink_recvmsg+0x1b4/0x338
[16750.920861]  ____sys_recvmsg+0x7c/0x2b0
[16750.924801]  ___sys_recvmsg+0x70/0x98
[16750.928564]  __sys_recvmsg+0x58/0xa0
[16750.932238]  __arm64_sys_recvmsg+0x28/0x30
[16750.936453]  el0_svc_common.constprop.3+0x90/0x158
[16750.941378]  do_el0_svc+0x74/0x90
[16750.944784]  el0_sync_handler+0x12c/0x1a8
[16750.948903]  el0_sync+0x114/0x140
[16750.952312] Code: f9400003 f907f423 eb02007f 54fffd60 (b9401060)
[16750.958583] ---[ end trace c8ad181c2f4b8576 ]---

This patch drops the use of the static iterator, and instead every time
the function is called iterates to the idx-th position of the
linked-list.

It would be better to convert the code not to use linked list for
associated stations storage (since the chip has a limited number of
associated stations anyway - it could just be an array). Such a change
may be proposed in the future. In the meantime this patch can backported
into stable kernels in this simple form.

Fixes: 8baca1a34d4c ("mwifiex: dump station support in uap mode")
Signed-off-by: Pali Rohár &lt;pali@kernel.org&gt;
Acked-by: Ganapathi Bhat &lt;ganapathi.bhat@nxp.com&gt;
Signed-off-by: Kalle Valo &lt;kvalo@codeaurora.org&gt;
Link: https://lore.kernel.org/r/20200515075924.13841-1-pali@kernel.org
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 3aa42bae9c4d1641aeb36f1a8585cd1d506cf471 ]

The mwifiex_cfg80211_dump_station() uses static variable for iterating
over a linked list of all associated stations (when the driver is in UAP
role). This has a race condition if .dump_station is called in parallel
for multiple interfaces. This corruption can be triggered by registering
multiple SSIDs and calling, in parallel for multiple interfaces
    iw dev &lt;iface&gt; station dump

[16750.719775] Unable to handle kernel paging request at virtual address dead000000000110
...
[16750.899173] Call trace:
[16750.901696]  mwifiex_cfg80211_dump_station+0x94/0x100 [mwifiex]
[16750.907824]  nl80211_dump_station+0xbc/0x278 [cfg80211]
[16750.913160]  netlink_dump+0xe8/0x320
[16750.916827]  netlink_recvmsg+0x1b4/0x338
[16750.920861]  ____sys_recvmsg+0x7c/0x2b0
[16750.924801]  ___sys_recvmsg+0x70/0x98
[16750.928564]  __sys_recvmsg+0x58/0xa0
[16750.932238]  __arm64_sys_recvmsg+0x28/0x30
[16750.936453]  el0_svc_common.constprop.3+0x90/0x158
[16750.941378]  do_el0_svc+0x74/0x90
[16750.944784]  el0_sync_handler+0x12c/0x1a8
[16750.948903]  el0_sync+0x114/0x140
[16750.952312] Code: f9400003 f907f423 eb02007f 54fffd60 (b9401060)
[16750.958583] ---[ end trace c8ad181c2f4b8576 ]---

This patch drops the use of the static iterator, and instead every time
the function is called iterates to the idx-th position of the
linked-list.

It would be better to convert the code not to use linked list for
associated stations storage (since the chip has a limited number of
associated stations anyway - it could just be an array). Such a change
may be proposed in the future. In the meantime this patch can backported
into stable kernels in this simple form.

Fixes: 8baca1a34d4c ("mwifiex: dump station support in uap mode")
Signed-off-by: Pali Rohár &lt;pali@kernel.org&gt;
Acked-by: Ganapathi Bhat &lt;ganapathi.bhat@nxp.com&gt;
Signed-off-by: Kalle Valo &lt;kvalo@codeaurora.org&gt;
Link: https://lore.kernel.org/r/20200515075924.13841-1-pali@kernel.org
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ath9k: Fix general protection fault in ath9k_hif_usb_rx_cb</title>
<updated>2020-06-20T08:23:18+00:00</updated>
<author>
<name>Qiujun Huang</name>
<email>hqjagain@gmail.com</email>
</author>
<published>2020-04-04T04:18:38+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=90ecba9f1041f436ed2b35ba7a970c7cc5d0df23'/>
<id>90ecba9f1041f436ed2b35ba7a970c7cc5d0df23</id>
<content type='text'>
commit 2bbcaaee1fcbd83272e29f31e2bb7e70d8c49e05 upstream.

In ath9k_hif_usb_rx_cb interface number is assumed to be 0.
usb_ifnum_to_if(urb-&gt;dev, 0)
But it isn't always true.

The case reported by syzbot:
https://lore.kernel.org/linux-usb/000000000000666c9c05a1c05d12@google.com
usb 2-1: new high-speed USB device number 2 using dummy_hcd
usb 2-1: config 1 has an invalid interface number: 2 but max is 0
usb 2-1: config 1 has no interface number 0
usb 2-1: New USB device found, idVendor=0cf3, idProduct=9271, bcdDevice=
1.08
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
general protection fault, probably for non-canonical address
0xdffffc0000000015: 0000 [#1] SMP KASAN
KASAN: null-ptr-deref in range [0x00000000000000a8-0x00000000000000af]
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.6.0-rc5-syzkaller #0

Call Trace
__usb_hcd_giveback_urb+0x29a/0x550 drivers/usb/core/hcd.c:1650
usb_hcd_giveback_urb+0x368/0x420 drivers/usb/core/hcd.c:1716
dummy_timer+0x1258/0x32ae drivers/usb/gadget/udc/dummy_hcd.c:1966
call_timer_fn+0x195/0x6f0 kernel/time/timer.c:1404
expire_timers kernel/time/timer.c:1449 [inline]
__run_timers kernel/time/timer.c:1773 [inline]
__run_timers kernel/time/timer.c:1740 [inline]
run_timer_softirq+0x5f9/0x1500 kernel/time/timer.c:1786
__do_softirq+0x21e/0x950 kernel/softirq.c:292
invoke_softirq kernel/softirq.c:373 [inline]
irq_exit+0x178/0x1a0 kernel/softirq.c:413
exiting_irq arch/x86/include/asm/apic.h:546 [inline]
smp_apic_timer_interrupt+0x141/0x540 arch/x86/kernel/apic/apic.c:1146
apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:829

Reported-and-tested-by: syzbot+40d5d2e8a4680952f042@syzkaller.appspotmail.com
Signed-off-by: Qiujun Huang &lt;hqjagain@gmail.com&gt;
Signed-off-by: Kalle Valo &lt;kvalo@codeaurora.org&gt;
Link: https://lore.kernel.org/r/20200404041838.10426-6-hqjagain@gmail.com
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 2bbcaaee1fcbd83272e29f31e2bb7e70d8c49e05 upstream.

In ath9k_hif_usb_rx_cb interface number is assumed to be 0.
usb_ifnum_to_if(urb-&gt;dev, 0)
But it isn't always true.

The case reported by syzbot:
https://lore.kernel.org/linux-usb/000000000000666c9c05a1c05d12@google.com
usb 2-1: new high-speed USB device number 2 using dummy_hcd
usb 2-1: config 1 has an invalid interface number: 2 but max is 0
usb 2-1: config 1 has no interface number 0
usb 2-1: New USB device found, idVendor=0cf3, idProduct=9271, bcdDevice=
1.08
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
general protection fault, probably for non-canonical address
0xdffffc0000000015: 0000 [#1] SMP KASAN
KASAN: null-ptr-deref in range [0x00000000000000a8-0x00000000000000af]
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.6.0-rc5-syzkaller #0

Call Trace
__usb_hcd_giveback_urb+0x29a/0x550 drivers/usb/core/hcd.c:1650
usb_hcd_giveback_urb+0x368/0x420 drivers/usb/core/hcd.c:1716
dummy_timer+0x1258/0x32ae drivers/usb/gadget/udc/dummy_hcd.c:1966
call_timer_fn+0x195/0x6f0 kernel/time/timer.c:1404
expire_timers kernel/time/timer.c:1449 [inline]
__run_timers kernel/time/timer.c:1773 [inline]
__run_timers kernel/time/timer.c:1740 [inline]
run_timer_softirq+0x5f9/0x1500 kernel/time/timer.c:1786
__do_softirq+0x21e/0x950 kernel/softirq.c:292
invoke_softirq kernel/softirq.c:373 [inline]
irq_exit+0x178/0x1a0 kernel/softirq.c:413
exiting_irq arch/x86/include/asm/apic.h:546 [inline]
smp_apic_timer_interrupt+0x141/0x540 arch/x86/kernel/apic/apic.c:1146
apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:829

Reported-and-tested-by: syzbot+40d5d2e8a4680952f042@syzkaller.appspotmail.com
Signed-off-by: Qiujun Huang &lt;hqjagain@gmail.com&gt;
Signed-off-by: Kalle Valo &lt;kvalo@codeaurora.org&gt;
Link: https://lore.kernel.org/r/20200404041838.10426-6-hqjagain@gmail.com
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>ath9x: Fix stack-out-of-bounds Write in ath9k_hif_usb_rx_cb</title>
<updated>2020-06-20T08:23:18+00:00</updated>
<author>
<name>Qiujun Huang</name>
<email>hqjagain@gmail.com</email>
</author>
<published>2020-04-04T04:18:37+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=22ed03b78b27119955037dbbde3b3bfc0e4fb686'/>
<id>22ed03b78b27119955037dbbde3b3bfc0e4fb686</id>
<content type='text'>
commit 19d6c375d671ce9949a864fb9a03e19f5487b4d3 upstream.

Add barrier to accessing the stack array skb_pool.

The case reported by syzbot:
https://lore.kernel.org/linux-usb/0000000000003d7c1505a2168418@google.com
BUG: KASAN: stack-out-of-bounds in ath9k_hif_usb_rx_stream
drivers/net/wireless/ath/ath9k/hif_usb.c:626 [inline]
BUG: KASAN: stack-out-of-bounds in ath9k_hif_usb_rx_cb+0xdf6/0xf70
drivers/net/wireless/ath/ath9k/hif_usb.c:666
Write of size 8 at addr ffff8881db309a28 by task swapper/1/0

Call Trace:
ath9k_hif_usb_rx_stream drivers/net/wireless/ath/ath9k/hif_usb.c:626
[inline]
ath9k_hif_usb_rx_cb+0xdf6/0xf70
drivers/net/wireless/ath/ath9k/hif_usb.c:666
__usb_hcd_giveback_urb+0x1f2/0x470 drivers/usb/core/hcd.c:1648
usb_hcd_giveback_urb+0x368/0x420 drivers/usb/core/hcd.c:1713
dummy_timer+0x1258/0x32ae drivers/usb/gadget/udc/dummy_hcd.c:1966
call_timer_fn+0x195/0x6f0 kernel/time/timer.c:1404
expire_timers kernel/time/timer.c:1449 [inline]
__run_timers kernel/time/timer.c:1773 [inline]
__run_timers kernel/time/timer.c:1740 [inline]
run_timer_softirq+0x5f9/0x1500 kernel/time/timer.c:1786

Reported-and-tested-by: syzbot+d403396d4df67ad0bd5f@syzkaller.appspotmail.com
Signed-off-by: Qiujun Huang &lt;hqjagain@gmail.com&gt;
Signed-off-by: Kalle Valo &lt;kvalo@codeaurora.org&gt;
Link: https://lore.kernel.org/r/20200404041838.10426-5-hqjagain@gmail.com
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 19d6c375d671ce9949a864fb9a03e19f5487b4d3 upstream.

Add barrier to accessing the stack array skb_pool.

The case reported by syzbot:
https://lore.kernel.org/linux-usb/0000000000003d7c1505a2168418@google.com
BUG: KASAN: stack-out-of-bounds in ath9k_hif_usb_rx_stream
drivers/net/wireless/ath/ath9k/hif_usb.c:626 [inline]
BUG: KASAN: stack-out-of-bounds in ath9k_hif_usb_rx_cb+0xdf6/0xf70
drivers/net/wireless/ath/ath9k/hif_usb.c:666
Write of size 8 at addr ffff8881db309a28 by task swapper/1/0

Call Trace:
ath9k_hif_usb_rx_stream drivers/net/wireless/ath/ath9k/hif_usb.c:626
[inline]
ath9k_hif_usb_rx_cb+0xdf6/0xf70
drivers/net/wireless/ath/ath9k/hif_usb.c:666
__usb_hcd_giveback_urb+0x1f2/0x470 drivers/usb/core/hcd.c:1648
usb_hcd_giveback_urb+0x368/0x420 drivers/usb/core/hcd.c:1713
dummy_timer+0x1258/0x32ae drivers/usb/gadget/udc/dummy_hcd.c:1966
call_timer_fn+0x195/0x6f0 kernel/time/timer.c:1404
expire_timers kernel/time/timer.c:1449 [inline]
__run_timers kernel/time/timer.c:1773 [inline]
__run_timers kernel/time/timer.c:1740 [inline]
run_timer_softirq+0x5f9/0x1500 kernel/time/timer.c:1786

Reported-and-tested-by: syzbot+d403396d4df67ad0bd5f@syzkaller.appspotmail.com
Signed-off-by: Qiujun Huang &lt;hqjagain@gmail.com&gt;
Signed-off-by: Kalle Valo &lt;kvalo@codeaurora.org&gt;
Link: https://lore.kernel.org/r/20200404041838.10426-5-hqjagain@gmail.com
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
</feed>
