linux-stable.git/drivers/net/wireless, branch v4.12.7 Linux kernel stable tree brcmfmac: fix memleak due to calling brcmf_sdiod_sgtable_alloc() twice 2017-08-11T15:33:50+00:00 Arend Van Spriel arend.vanspriel@broadcom.com 2017-07-26T12:09:24+00:00 f0609ce459c92ea7d046b7cfac594104c2bec458 commit 5f5d03143de5e0c593da4ab18fc6393c2815e108 upstream. Due to a bugfix in wireless tree and the commit mentioned below a merge was needed which went haywire. So the submitted change resulted in the function brcmf_sdiod_sgtable_alloc() being called twice during the probe thus leaking the memory of the first call. Fixes: 4d7928959832 ("brcmfmac: switch to new platform data") Reported-by: Stefan Wahren <stefan.wahren@i2se.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 5f5d03143de5e0c593da4ab18fc6393c2815e108 upstream.

Due to a bugfix in wireless tree and the commit mentioned below a merge
was needed which went haywire. So the submitted change resulted in the
function brcmf_sdiod_sgtable_alloc() being called twice during the probe
thus leaking the memory of the first call.

Fixes: 4d7928959832 ("brcmfmac: switch to new platform data")
Reported-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
iwlwifi: dvm: prevent an out of bounds access 2017-08-11T15:33:50+00:00 Emmanuel Grumbach emmanuel.grumbach@intel.com 2017-06-08T07:55:26+00:00 a36e744105bad9b31e362e40a7cdcda02d7e2466 commit 0b0f934e92a8eaed2e6c48a50eae6f84661f74f3 upstream. iwlagn_check_ratid_empty takes the tid as a parameter, but it doesn't check that it is not IWL_TID_NON_QOS. Since IWL_TID_NON_QOS = 8 and iwl_priv::tid_data is an array with 8 entries, accessing iwl_priv::tid_data[IWL_TID_NON_QOS] is a bad idea. This happened in iwlagn_rx_reply_tx. Since iwlagn_check_ratid_empty is relevant only to check whether we can open A-MPDU, this flow is irrelevant if tid is IWL_TID_NON_QOS. Call iwlagn_check_ratid_empty only inside the if (tid != IWL_TID_NON_QOS) a few lines earlier in the function. Reported-by: Seraphime Kirkovski <kirkseraph@gmail.com> Tested-by: Seraphime Kirkovski <kirkseraph@gmail.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 0b0f934e92a8eaed2e6c48a50eae6f84661f74f3 upstream.

iwlagn_check_ratid_empty takes the tid as a parameter, but
it doesn't check that it is not IWL_TID_NON_QOS.
Since IWL_TID_NON_QOS = 8 and iwl_priv::tid_data is an array
with 8 entries, accessing iwl_priv::tid_data[IWL_TID_NON_QOS]
is a bad idea.
This happened in iwlagn_rx_reply_tx. Since
iwlagn_check_ratid_empty is relevant only to check whether
we can open A-MPDU, this flow is irrelevant if tid is
IWL_TID_NON_QOS. Call iwlagn_check_ratid_empty only inside
the
	if (tid != IWL_TID_NON_QOS)

a few lines earlier in the function.

Reported-by: Seraphime Kirkovski <kirkseraph@gmail.com>
Tested-by: Seraphime Kirkovski <kirkseraph@gmail.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mwifiex: fixup error cases in mwifiex_add_virtual_intf() 2017-07-27T22:10:05+00:00 Brian Norris briannorris@chromium.org 2017-05-12T16:41:58+00:00 a88266ef19946afec0a7323d23df5acf821c85fd commit 8535107aa4ef92520cbb9a4739563b389c5f8e2c upstream. If we fail to add an interface in mwifiex_add_virtual_intf(), we might hit a BUG_ON() in the networking code, because we didn't tear things down properly. Among the problems: (a) when failing to allocate workqueues, we fail to unregister the netdev before calling free_netdev() (b) even if we do try to unregister the netdev, we're still holding the rtnl lock, so the device never properly unregistered; we'll be at state NETREG_UNREGISTERING, and then hit free_netdev()'s: BUG_ON(dev->reg_state != NETREG_UNREGISTERED); (c) we're allocating some dependent resources (e.g., DFS workqueues) after we've registered the interface; this may or may not cause problems, but it's good practice to allocate these before registering (d) we're not even trying to unwind anything when mwifiex_send_cmd() or mwifiex_sta_init_cmd() fail To fix these issues, let's: * add a stacked set of error handling labels, to keep error handling consistent and properly ordered (resolving (a) and (d)) * move the workqueue allocations before the registration (to resolve (c); also resolves (b) by avoiding error cases where we have to unregister) [Incidentally, it's pretty easy to interrupt the alloc_workqueue() in, e.g., the following: iw phy phy0 interface add mlan0 type station by sending it SIGTERM.] This bugfix covers commits like commit 7d652034d1a0 ("mwifiex: channel switch support for mwifiex"), but parts of this bug exist all the way back to the introduction of dynamic interface handling in commit 93a1df48d224 ("mwifiex: add cfg80211 handlers add/del_virtual_intf"). Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 8535107aa4ef92520cbb9a4739563b389c5f8e2c upstream.

If we fail to add an interface in mwifiex_add_virtual_intf(), we might
hit a BUG_ON() in the networking code, because we didn't tear things
down properly. Among the problems:

 (a) when failing to allocate workqueues, we fail to unregister the
     netdev before calling free_netdev()
 (b) even if we do try to unregister the netdev, we're still holding the
     rtnl lock, so the device never properly unregistered; we'll be at
     state NETREG_UNREGISTERING, and then hit free_netdev()'s:
	BUG_ON(dev->reg_state != NETREG_UNREGISTERED);
 (c) we're allocating some dependent resources (e.g., DFS workqueues)
     after we've registered the interface; this may or may not cause
     problems, but it's good practice to allocate these before registering
 (d) we're not even trying to unwind anything when mwifiex_send_cmd() or
     mwifiex_sta_init_cmd() fail

To fix these issues, let's:

 * add a stacked set of error handling labels, to keep error handling
   consistent and properly ordered (resolving (a) and (d))
 * move the workqueue allocations before the registration (to resolve
   (c); also resolves (b) by avoiding error cases where we have to
   unregister)

[Incidentally, it's pretty easy to interrupt the alloc_workqueue() in,
e.g., the following:

  iw phy phy0 interface add mlan0 type station

by sending it SIGTERM.]

This bugfix covers commits like commit 7d652034d1a0 ("mwifiex: channel
switch support for mwifiex"), but parts of this bug exist all the way
back to the introduction of dynamic interface handling in commit
93a1df48d224 ("mwifiex: add cfg80211 handlers add/del_virtual_intf").

Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
wlcore: fix 64K page support 2017-07-27T22:10:05+00:00 Arnd Bergmann arnd@arndb.de 2017-05-11T11:52:09+00:00 1566e0592c90b141f0e0f881d0103331ec558650 commit 4a4274bf2dbbd1c7a45be0c89a1687c9d2eef4a0 upstream. In the stable linux-3.16 branch, I ran into a warning in the wlcore driver: drivers/net/wireless/ti/wlcore/spi.c: In function 'wl12xx_spi_raw_write': drivers/net/wireless/ti/wlcore/spi.c:315:1: error: the frame size of 12848 bytes is larger than 2048 bytes [-Werror=frame-larger-than=] Newer kernels no longer show the warning, but the bug is still there, as the allocation is based on the CPU page size rather than the actual capabilities of the hardware. This replaces the PAGE_SIZE macro with the SZ_4K macro, i.e. 4096 bytes per buffer. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 4a4274bf2dbbd1c7a45be0c89a1687c9d2eef4a0 upstream.

In the stable linux-3.16 branch, I ran into a warning in the
wlcore driver:

drivers/net/wireless/ti/wlcore/spi.c: In function 'wl12xx_spi_raw_write':
drivers/net/wireless/ti/wlcore/spi.c:315:1: error: the frame size of 12848 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]

Newer kernels no longer show the warning, but the bug is still there,
as the allocation is based on the CPU page size rather than the
actual capabilities of the hardware.

This replaces the PAGE_SIZE macro with the SZ_4K macro, i.e. 4096 bytes
per buffer.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
iwlwifi: mvm: fix the recovery flow while connecting 2017-07-27T22:10:03+00:00 Emmanuel Grumbach emmanuel.grumbach@intel.com 2017-05-05T05:51:24+00:00 bf3d383a38bd10de3202a3de6363d0bd355200ca commit 6b28f9784c394f0692e160f81b07c82cb64af160 upstream. In BSS mode in the disconnection flow, mac80211 removes the AP station before the vif is set to unassociated. Our firmware wants it the other way around: first set the vif as unassociated, and then remove the AP station. In order to bridge between those two different behaviors, iwlmvm doesn't remove the station from the firmware when mac80211 removes it, but only after the vif is set to unassociated. The implementation is in iwl_mvm_bss_info_changed_station: if (assoc state was modified && mvmvif->ap_sta_id is VALID && assoc state is now UNASSC) remove_the_station_from_the_firmware() During the recovery flow, mac80211 re-adds the AP station and then reconfigures the vif. Since the vif is not associated, and then, we enter the if above (which was intended to be taken in the disconnection flow only) and remove the station we just added. This defeats the recovery flow. Fix this by not removing the AP station in this flow if we are in recovery flow. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 6b28f9784c394f0692e160f81b07c82cb64af160 upstream.

In BSS mode in the disconnection flow, mac80211 removes
the AP station before the vif is set to unassociated.
Our firmware wants it the other way around: first set
the vif as unassociated, and then remove the AP station.

In order to bridge between those two different behaviors,
iwlmvm doesn't remove the station from the firmware when
mac80211 removes it, but only after the vif is set to
unassociated. The implementation is in
iwl_mvm_bss_info_changed_station:

if (assoc state was modified && mvmvif->ap_sta_id is VALID
    && assoc state is now UNASSC)
	remove_the_station_from_the_firmware()

During the recovery flow, mac80211 re-adds the AP station
and then reconfigures the vif. Since the vif is not
associated, and then, we enter the if above (which was
intended to be taken in the disconnection flow only) and
remove the station we just added. This defeats the
recovery flow.

Fix this by not removing the AP station in this flow if
we are in recovery flow.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ath9k: fix an invalid pointer dereference in ath9k_rng_stop() 2017-07-27T22:10:03+00:00 Miaoqing Pan miaoqing@codeaurora.org 2017-06-27T14:31:53+00:00 a1b6a2c3592b7a4d2a12b31fc5c4c38706a3f8f9 commit 07246c115801c27652700e3679bb58661ef7ed65 upstream. The bug was triggered when do suspend/resuming continuously on Dell XPS L322X/0PJHXN version 9333 (2013) with kernel 4.12.0-041200rc4-generic. But can't reproduce on DELL E5440 + AR9300 PCIE chips. The warning is caused by accessing invalid pointer sc->rng_task. sc->rng_task is not be cleared after kthread_stop(sc->rng_task) be called in ath9k_rng_stop(). Because the kthread is stopped before ath9k_rng_kthread() be scheduled. So set sc->rng_task to null after kthread_stop(sc->rng_task) to resolve this issue. WARNING: CPU: 0 PID: 984 at linux/kernel/kthread.c:71 kthread_stop+0xf1/0x100 CPU: 0 PID: 984 Comm: NetworkManager Not tainted 4.12.0-041200rc4-generic #201706042031 Hardware name: Dell Inc. Dell System XPS L322X/0PJHXN, BIOS A09 05/15/2013 task: ffff950170fdda00 task.stack: ffffa22c01538000 RIP: 0010:kthread_stop+0xf1/0x100 RSP: 0018:ffffa22c0153b5b0 EFLAGS: 00010246 RAX: ffffffffa6257800 RBX: ffff950171b79560 RCX: 0000000000000000 RDX: 0000000080000000 RSI: 000000007fffffff RDI: ffff9500ac9a9680 RBP: ffffa22c0153b5c8 R08: 0000000000000000 R09: 0000000000000000 R10: ffffa22c0153b648 R11: ffff9501768004b8 R12: ffff9500ac9a9680 R13: ffff950171b79f70 R14: ffff950171b78780 R15: ffff9501749dc018 FS: 00007f0d6bfd5540(0000) GS:ffff95017f200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc190161a08 CR3: 0000000232906000 CR4: 00000000001406f0 Call Trace: ath9k_rng_stop+0x1a/0x20 [ath9k] ath9k_stop+0x3b/0x1d0 [ath9k] drv_stop+0x33/0xf0 [mac80211] ieee80211_stop_device+0x43/0x50 [mac80211] ieee80211_do_stop+0x4f2/0x810 [mac80211] Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196043 Reported-by: Giulio Genovese <giulio.genovese@gmail.com> Tested-by: Giulio Genovese <giulio.genovese@gmail.com> Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 07246c115801c27652700e3679bb58661ef7ed65 upstream.

The bug was triggered when do suspend/resuming continuously
on Dell XPS L322X/0PJHXN version 9333 (2013) with kernel
4.12.0-041200rc4-generic. But can't reproduce on DELL
E5440 + AR9300 PCIE chips.

The warning is caused by accessing invalid pointer sc->rng_task.
sc->rng_task is not be cleared after kthread_stop(sc->rng_task)
be called in ath9k_rng_stop(). Because the kthread is stopped
before ath9k_rng_kthread() be scheduled.

So set sc->rng_task to null after kthread_stop(sc->rng_task) to
resolve this issue.

WARNING: CPU: 0 PID: 984 at linux/kernel/kthread.c:71 kthread_stop+0xf1/0x100
CPU: 0 PID: 984 Comm: NetworkManager Not tainted 4.12.0-041200rc4-generic #201706042031
Hardware name: Dell Inc.          Dell System XPS L322X/0PJHXN, BIOS A09 05/15/2013
task: ffff950170fdda00 task.stack: ffffa22c01538000
RIP: 0010:kthread_stop+0xf1/0x100
RSP: 0018:ffffa22c0153b5b0 EFLAGS: 00010246
RAX: ffffffffa6257800 RBX: ffff950171b79560 RCX: 0000000000000000
RDX: 0000000080000000 RSI: 000000007fffffff RDI: ffff9500ac9a9680
RBP: ffffa22c0153b5c8 R08: 0000000000000000 R09: 0000000000000000
R10: ffffa22c0153b648 R11: ffff9501768004b8 R12: ffff9500ac9a9680
R13: ffff950171b79f70 R14: ffff950171b78780 R15: ffff9501749dc018
FS:  00007f0d6bfd5540(0000) GS:ffff95017f200000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fc190161a08 CR3: 0000000232906000 CR4: 00000000001406f0
Call Trace:
  ath9k_rng_stop+0x1a/0x20 [ath9k]
  ath9k_stop+0x3b/0x1d0 [ath9k]
  drv_stop+0x33/0xf0 [mac80211]
  ieee80211_stop_device+0x43/0x50 [mac80211]
  ieee80211_do_stop+0x4f2/0x810 [mac80211]

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196043
Reported-by: Giulio Genovese <giulio.genovese@gmail.com>
Tested-by: Giulio Genovese <giulio.genovese@gmail.com>
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ath9k: fix tx99 bus error 2017-07-27T22:10:03+00:00 Miaoqing Pan miaoqing@codeaurora.org 2017-06-27T14:31:51+00:00 e9fe79bcf1a7f0121fc97b0ac0c80b7878117521 commit bde717ab473668377fc65872398a102d40cb2d58 upstream. The hard coded register 0x9864 and 0x9924 are invalid for ar9300 chips. Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit bde717ab473668377fc65872398a102d40cb2d58 upstream.

The hard coded register 0x9864 and 0x9924 are invalid
for ar9300 chips.

Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ath9k: fix tx99 use after free 2017-07-27T22:10:03+00:00 Miaoqing Pan miaoqing@codeaurora.org 2017-06-27T14:31:49+00:00 33c147af30973b25d04014342e42292bd31f0996 commit cf8ce1ea61b75712a154c93e40f2a5af2e4dd997 upstream. One scenario that could lead to UAF is two threads writing simultaneously to the "tx99" debug file. One of them would set the "start" value to true and follow to ath9k_tx99_init(). Inside the function it would set the sc->tx99_state to true after allocating sc->tx99skb. Then, the other thread would execute write_file_tx99() and call ath9k_tx99_deinit(). sc->tx99_state would be freed. After that, the first thread would continue inside ath9k_tx99_init() and call r = ath9k_tx99_send(sc, sc->tx99_skb, &txctl); that would make use of the freed sc->tx99_skb memory. Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit cf8ce1ea61b75712a154c93e40f2a5af2e4dd997 upstream.

One scenario that could lead to UAF is two threads writing
simultaneously to the "tx99" debug file. One of them would
set the "start" value to true and follow to ath9k_tx99_init().
Inside the function it would set the sc->tx99_state to true
after allocating sc->tx99skb. Then, the other thread would
execute write_file_tx99() and call ath9k_tx99_deinit().
sc->tx99_state would be freed. After that, the first thread
would continue inside ath9k_tx99_init() and call
r = ath9k_tx99_send(sc, sc->tx99_skb, &txctl);
that would make use of the freed sc->tx99_skb memory.

Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
brcmfmac: Fix glom_skb leak in brcmf_sdiod_recv_chain 2017-07-21T04:59:06+00:00 Peter S. Housel housel@acm.org 2017-06-12T10:46:22+00:00 c9e07e2f52830311db2cee9d581105cf5a2b733e commit 5ea59db8a375216e6c915c5586f556766673b5a7 upstream. An earlier change to this function (3bdae810721b) fixed a leak in the case of an unsuccessful call to brcmf_sdiod_buffrw(). However, the glom_skb buffer, used for emulating a scattering read, is never used or referenced after its contents are copied into the destination buffers, and therefore always needs to be freed by the end of the function. Fixes: 3bdae810721b ("brcmfmac: Fix glob_skb leak in brcmf_sdiod_recv_chain") Fixes: a413e39a38573 ("brcmfmac: fix brcmf_sdcard_recv_chain() for host without sg support") Signed-off-by: Peter S. Housel <housel@acm.org> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 5ea59db8a375216e6c915c5586f556766673b5a7 upstream.

An earlier change to this function (3bdae810721b) fixed a leak in the
case of an unsuccessful call to brcmf_sdiod_buffrw(). However, the
glom_skb buffer, used for emulating a scattering read, is never used
or referenced after its contents are copied into the destination
buffers, and therefore always needs to be freed by the end of the
function.

Fixes: 3bdae810721b ("brcmfmac: Fix glob_skb leak in brcmf_sdiod_recv_chain")
Fixes: a413e39a38573 ("brcmfmac: fix brcmf_sdcard_recv_chain() for host without sg support")
Signed-off-by: Peter S. Housel <housel@acm.org>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
brcmfmac: Fix a memory leak in error handling path in 'brcmf_cfg80211_attach' 2017-07-21T04:59:06+00:00 Christophe Jaillet christophe.jaillet@wanadoo.fr 2017-06-21T05:45:53+00:00 c34395857a7b3a3828983dc751cd464f4d04b5c6 commit 57c00f2fac512837f8de73474ec1f54020015bae upstream. If 'wiphy_new()' fails, we leak 'ops'. Add a new label in the error handling path to free it in such a case. Fixes: 5c22fb85102a7 ("brcmfmac: add wowl gtk rekeying offload support") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 57c00f2fac512837f8de73474ec1f54020015bae upstream.

If 'wiphy_new()' fails, we leak 'ops'. Add a new label in the error
handling path to free it in such a case.

Fixes: 5c22fb85102a7 ("brcmfmac: add wowl gtk rekeying offload support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>