linux-stable.git/drivers/net/wireless, branch v3.4.54

rtlwifi: rtl8192cu: Fix duplicate if test

2013-07-22T01:19:00+00:00

commit 10d0b9030a3f86e1e26c710c7580524d7787d688 upstream.

A typo causes routine rtl92cu_phy_rf6052_set_cck_txpower() to test the
same condition twice. The problem was found using cppcheck-1.49, and the
proper fix was verified against the pre-mac80211 version of the code.

This patch was originally included as commit 1288aa4, but was accidentally
reverted in a later patch.

Reported-by: David Binderman  [original report]
Reported-by: Andrea Morello  [report of accidental reversion]
Signed-off-by: Larry Finger 
Signed-off-by: John W. Linville 
Signed-off-by: Greg Kroah-Hartman

rtlwifi: rtl8192cu: Add new USB ID for TP-Link TL-WN8200ND

2013-07-22T01:19:00+00:00

commit c4d827c5ccc3a49227dbf9d4b248a2e86f388023 upstream.

This is a new device for this driver.

Reported-by: Tobias Kluge 
Signed-off-by: Larry Finger 
Cc: Tobias Kluge 
Signed-off-by: John W. Linville 
Signed-off-by: Greg Kroah-Hartman

ath9k: Use minstrel rate control by default

2013-06-20T18:58:44+00:00

commit 5efac94999ff218e0101f67a059e44abb4b0b523 upstream.

The ath9k rate control algorithm has various architectural
issues that make it a poor fit in scenarios like congested
environments etc.

An example: https://bugzilla.redhat.com/show_bug.cgi?id=927191

Change the default to minstrel which is more robust in such cases.
The ath9k RC code is left in the driver for now, maybe it can
be removed altogether later on.

Signed-off-by: Sujith Manoharan 
Cc: Jouni Malinen 
Cc: Linus Torvalds 
Signed-off-by: John W. Linville 
Signed-off-by: Greg Kroah-Hartman

ath9k: Disable PowerSave by default

2013-06-20T18:58:44+00:00

commit 531671cb17af07281e6f28c1425f754346e65c41 upstream.

Almost all the DMA issues which have plagued ath9k (in station mode)
for years are related to PS. Disabling PS usually "fixes" the user's
connection stablility. Reports of DMA problems are still trickling in
and are sitting in the kernel bugzilla. Until the PS code in ath9k is
given a thorough review, disbale it by default. The slight increase
in chip power consumption is a small price to pay for improved link
stability.

Signed-off-by: Sujith Manoharan 
Signed-off-by: John W. Linville 
Signed-off-by: Greg Kroah-Hartman

b43: stop format string leaking into error msgs

2013-06-20T18:58:43+00:00

commit e0e29b683d6784ef59bbc914eac85a04b650e63c upstream.

The module parameter "fwpostfix" is userspace controllable, unfiltered,
and is used to define the firmware filename. b43_do_request_fw() populates
ctx->errors[] on error, containing the firmware filename. b43err()
parses its arguments as a format string. For systems with b43 hardware,
this could lead to a uid-0 to ring-0 escalation.

CVE-2013-2852

Signed-off-by: Kees Cook 
Signed-off-by: John W. Linville 
Signed-off-by: Greg Kroah-Hartman

B43: Handle DMA RX descriptor underrun

2013-05-19T17:54:41+00:00

commit 73b82bf0bfbf58e6ff328d3726934370585f6e78 upstream.

Add handling of rx descriptor underflow. This fixes a fault that could
happen on slow machines, where data is received faster than the CPU can
handle. In such a case the device will use up all rx descriptors and
refuse to send any more data before confirming that it is ok. This
patch enables necessary interrupt to discover such a situation and will
handle them by dropping everything in the ring buffer.

Reviewed-by: Michael Buesch 
Signed-off-by: Thommy Jakobsson 
Signed-off-by: John W. Linville 
Signed-off-by: Greg Kroah-Hartman

mwifiex: fix setting of multicast filter

2013-05-19T17:54:41+00:00

commit ccd384b10420ac81ba3fb9b0a7d18272c7173552 upstream.

A small bug in this code was causing the ALLMULTI filter to be set
when in fact we were just wanting to program a selective multicast list
to the hardware.

Fix that bug and remove a redundant if condition in the code that
follows.

This fixes wakeup behaviour when multicast WOL is enabled. Previously,
all multicast packets would wake up the system. Now, only those that the
host intended to receive trigger wakeups.

Signed-off-by: Daniel Drake 
Acked-by: Bing Zhao 
Signed-off-by: John W. Linville 
Signed-off-by: Greg Kroah-Hartman

mwifiex: clear is_suspended flag when interrupt is received early

2013-05-19T17:54:41+00:00

commit 48795424acff7215d5eac0b52793a2c1eb3a6283 upstream.

When the XO-4 with 8787 wireless is woken up due to wake-on-WLAN
mwifiex is often flooded with "not allowed while suspended" messages
and the interface is unusable.

[  202.171609] int: sdio_ireg = 0x1
[  202.180700] info: mwifiex_process_hs_config: auto cancelling host
               sleep since there is interrupt from the firmware
[  202.201880] event: wakeup device...
[  202.211452] event: hs_deactivated
[  202.514638] info: --- Rx: Data packet ---
[  202.514753] data: 4294957544 BSS(0-0): Data <= kernel
[  202.514825] PREP_CMD: device in suspended state
[  202.514839] data: dequeuing the packet ec7248c0 ec4869c0
[  202.514886] mwifiex_write_data_sync: not allowed while suspended
[  202.514886] host_to_card, write iomem (1) failed: -1
[  202.514917] mwifiex_write_data_sync: not allowed while suspended
[  202.514936] host_to_card, write iomem (2) failed: -1
[  202.514949] mwifiex_write_data_sync: not allowed while suspended
[  202.514965] host_to_card, write iomem (3) failed: -1
[  202.514976] mwifiex_write_data_async failed: 0xFFFFFFFF

This can be readily reproduced when putting the XO-4 in a loop where
it goes to sleep due to inactivity, but then wakes up due to an
incoming ping. The error is hit within an hour or two.

This issue happens when an interrupt comes in early while host sleep
is still activated. Driver handles this case by auto cancelling host
sleep. However is_suspended flag is still set which prevents any cmd
or data from being sent to firmware. Fix it by clearing is_suspended
flag in this path.

Reported-by: Daniel Drake 
Tested-by: Daniel Drake 
Signed-off-by: Bing Zhao 
Signed-off-by: John W. Linville 
Signed-off-by: Greg Kroah-Hartman

ath9k: fix key allocation error handling for powersave keys

2013-05-19T17:54:40+00:00

commit 4ef69d0394cba8caa9f75d3f2e53429bfb8b3045 upstream.

If no keycache slots are available, ath_key_config can return -ENOSPC.
If the key index is not checked for errors, it can lead to logspam that
looks like this: "ath: wiphy0: keyreset: keycache entry 228 out of range"
This can cause follow-up errors if the invalid keycache index gets
used for tx.

Signed-off-by: Felix Fietkau 
Signed-off-by: John W. Linville 
Signed-off-by: Greg Kroah-Hartman

mwifiex: Call pci_release_region after calling pci_disable_device

2013-05-08T02:51:52+00:00

commit 5b0d9b218b74042ff72bf4bfda6eeb2e4bf98397 upstream.

"drivers should call pci_release_region() AFTER
calling pci_disable_device()"

Please refer section 3.2 Request MMIO/IOP resources
in Documentation/PCI/pci.txt

Signed-off-by: Avinash Patil 
Signed-off-by: Amitkumar Karwar 
Signed-off-by: Yogesh Ashok Powar 
Signed-off-by: Bing Zhao 
Signed-off-by: John W. Linville 
Signed-off-by: Greg Kroah-Hartman