linux-stable.git/drivers/net/wireless, branch v3.16.75 Linux kernel stable tree ath6kl: add some bounds checking 2019-09-23T20:12:17+00:00 Dan Carpenter dan.carpenter@oracle.com 2019-04-04T08:56:51+00:00 65e2043814c7d6096521199ae8e18d5b40254a3e commit 5d6751eaff672ea77642e74e92e6c0ac7f9709ab upstream. The "ev->traffic_class" and "reply->ac" variables come from the network and they're used as an offset into the wmi->stream_exist_for_ac[] array. Those variables are u8 so they can be 0-255 but the stream_exist_for_ac[] array only has WMM_NUM_AC (4) elements. We need to add a couple bounds checks to prevent array overflows. I also modified one existing check from "if (traffic_class > 3) {" to "if (traffic_class >= WMM_NUM_AC) {" just to make them all consistent. Fixes: bdcd81707973 (" Add ath6kl cleaned up driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 5d6751eaff672ea77642e74e92e6c0ac7f9709ab upstream.

The "ev->traffic_class" and "reply->ac" variables come from the network
and they're used as an offset into the wmi->stream_exist_for_ac[] array.
Those variables are u8 so they can be 0-255 but the stream_exist_for_ac[]
array only has WMM_NUM_AC (4) elements.  We need to add a couple bounds
checks to prevent array overflows.

I also modified one existing check from "if (traffic_class > 3) {" to
"if (traffic_class >= WMM_NUM_AC) {" just to make them all consistent.

Fixes: bdcd81707973 (" Add ath6kl cleaned up driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
p54usb: Fix race between disconnect and firmware loading 2019-09-23T20:12:14+00:00 Alan Stern stern@rowland.harvard.edu 2019-05-20T14:44:21+00:00 450e350ba7c383dc74b181e4eeb50526df68433e commit 6e41e2257f1094acc37618bf6c856115374c6922 upstream. The syzbot fuzzer found a bug in the p54 USB wireless driver. The issue involves a race between disconnect and the firmware-loader callback routine, and it has several aspects. One big problem is that when the firmware can't be loaded, the callback routine tries to unbind the driver from the USB _device_ (by calling device_release_driver) instead of from the USB _interface_ to which it is actually bound (by calling usb_driver_release_interface). The race involves access to the private data structure. The driver's disconnect handler waits for a completion that is signalled by the firmware-loader callback routine. As soon as the completion is signalled, you have to assume that the private data structure may have been deallocated by the disconnect handler -- even if the firmware was loaded without errors. However, the callback routine does access the private data several times after that point. Another problem is that, in order to ensure that the USB device structure hasn't been freed when the callback routine runs, the driver takes a reference to it. This isn't good enough any more, because now that the callback routine calls usb_driver_release_interface, it has to ensure that the interface structure hasn't been freed. Finally, the driver takes an unnecessary reference to the USB device structure in the probe function and drops the reference in the disconnect handler. This extra reference doesn't accomplish anything, because the USB core already guarantees that a device structure won't be deallocated while a driver is still bound to any of its interfaces. To fix these problems, this patch makes the following changes: Call usb_driver_release_interface() rather than device_release_driver(). Don't signal the completion until after the important information has been copied out of the private data structure, and don't refer to the private data at all thereafter. Lock udev (the interface's parent) before unbinding the driver instead of locking udev->parent. During the firmware loading process, take a reference to the USB interface instead of the USB device. Don't take an unnecessary reference to the device during probe (and then don't drop it during disconnect). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: syzbot+200d4bb11b23d929335f@syzkaller.appspotmail.com Acked-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 6e41e2257f1094acc37618bf6c856115374c6922 upstream.

The syzbot fuzzer found a bug in the p54 USB wireless driver.  The
issue involves a race between disconnect and the firmware-loader
callback routine, and it has several aspects.

One big problem is that when the firmware can't be loaded, the
callback routine tries to unbind the driver from the USB _device_ (by
calling device_release_driver) instead of from the USB _interface_ to
which it is actually bound (by calling usb_driver_release_interface).

The race involves access to the private data structure.  The driver's
disconnect handler waits for a completion that is signalled by the
firmware-loader callback routine.  As soon as the completion is
signalled, you have to assume that the private data structure may have
been deallocated by the disconnect handler -- even if the firmware was
loaded without errors.  However, the callback routine does access the
private data several times after that point.

Another problem is that, in order to ensure that the USB device
structure hasn't been freed when the callback routine runs, the driver
takes a reference to it.  This isn't good enough any more, because now
that the callback routine calls usb_driver_release_interface, it has
to ensure that the interface structure hasn't been freed.

Finally, the driver takes an unnecessary reference to the USB device
structure in the probe function and drops the reference in the
disconnect handler.  This extra reference doesn't accomplish anything,
because the USB core already guarantees that a device structure won't
be deallocated while a driver is still bound to any of its interfaces.

To fix these problems, this patch makes the following changes:

	Call usb_driver_release_interface() rather than
	device_release_driver().

	Don't signal the completion until after the important
	information has been copied out of the private data structure,
	and don't refer to the private data at all thereafter.

	Lock udev (the interface's parent) before unbinding the driver
	instead of locking udev->parent.

	During the firmware loading process, take a reference to the
	USB interface instead of the USB device.

	Don't take an unnecessary reference to the device during probe
	(and then don't drop it during disconnect).

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: syzbot+200d4bb11b23d929335f@syzkaller.appspotmail.com
Acked-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
mwifiex: Fix three heap overflow at parsing element in cfg80211_ap_settings 2019-09-23T20:12:11+00:00 Wen Huang huangwenabc@gmail.com 2019-08-28T02:07:51+00:00 fb8186b15518423646f0e2105c34b3e620623b4e commit 7caac62ed598a196d6ddf8d9c121e12e082cac3a upstream. mwifiex_update_vs_ie(),mwifiex_set_uap_rates() and mwifiex_set_wmm_params() call memcpy() without checking the destination size.Since the source is given from user-space, this may trigger a heap buffer overflow. Fix them by putting the length check before performing memcpy(). This fix addresses CVE-2019-14814,CVE-2019-14815,CVE-2019-14816. Signed-off-by: Wen Huang <huangwenabc@gmail.com> Acked-by: Ganapathi Bhat <gbhat@marvell.comg> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> [bwh: Backported to 3.16: adjust filenames] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 7caac62ed598a196d6ddf8d9c121e12e082cac3a upstream.

mwifiex_update_vs_ie(),mwifiex_set_uap_rates() and
mwifiex_set_wmm_params() call memcpy() without checking
the destination size.Since the source is given from
user-space, this may trigger a heap buffer overflow.

Fix them by putting the length check before performing memcpy().

This fix addresses CVE-2019-14814,CVE-2019-14815,CVE-2019-14816.

Signed-off-by: Wen Huang <huangwenabc@gmail.com>
Acked-by: Ganapathi Bhat <gbhat@marvell.comg>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
[bwh: Backported to 3.16: adjust filenames]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
mwifiex: vendor_ie length check for parse WMM IEs 2019-09-23T20:12:10+00:00 Karthik D A karthida@marvell.com 2016-09-28T12:48:24+00:00 e58e542e6eab2734dda4e5006d9ec3226fddd4c1 commit 113630b581d6d423998d2113a8e892ed6e6af6f9 upstream. While copying the vendor_ie obtained from the cfg80211_find_vendor_ie() to the struct mwifiex_types_wmm_info, length/size was inappropriate. This patch corrects the required length needed to the mwifiex_types_wmm_info Signed-off-by: Karthik D A <karthida@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> [bwh: Backported to 3.16: adjust filename] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 113630b581d6d423998d2113a8e892ed6e6af6f9 upstream.

While copying the vendor_ie obtained from the cfg80211_find_vendor_ie()
to the struct mwifiex_types_wmm_info, length/size was inappropriate.
This patch corrects the required length needed to the
mwifiex_types_wmm_info

Signed-off-by: Karthik D A <karthida@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
[bwh: Backported to 3.16: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
rsi: add fix for crash during assertions 2019-09-23T20:12:09+00:00 Sanjay Konduri sanjay.konduri@redpinesignals.com 2018-05-15T09:04:30+00:00 fd56118648c89adbd7a64bc8e3e26ac4871d1c1a commit abd39c6ded9db53aa44c2540092bdd5fb6590fa8 upstream. Observed crash in some scenarios when assertion has occurred, this is because hw structure is freed and is tried to get accessed in some functions where null check is already present. So, avoided the crash by making the hw to NULL after freeing. Signed-off-by: Sanjay Konduri <sanjay.konduri@redpinesignals.com> Signed-off-by: Sushant Kumar Mishra <sushant.mishra@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit abd39c6ded9db53aa44c2540092bdd5fb6590fa8 upstream.

Observed crash in some scenarios when assertion has occurred,
this is because hw structure is freed and is tried to get
accessed in some functions where null check is already
present. So, avoided the crash by making the hw to NULL after
freeing.

Signed-off-by: Sanjay Konduri <sanjay.konduri@redpinesignals.com>
Signed-off-by: Sushant Kumar Mishra <sushant.mishra@redpinesignals.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
p54: drop device reference count if fails to enable device 2019-09-23T20:11:53+00:00 Pan Bian bianpan2016@163.com 2019-04-17T09:41:23+00:00 3c3e63e351405fff843102db8222b397068e5281 commit 8149069db81853570a665f5e5648c0e526dc0e43 upstream. The function p54p_probe takes an extra reference count of the PCI device. However, the extra reference count is not dropped when it fails to enable the PCI device. This patch fixes the bug. Signed-off-by: Pan Bian <bianpan2016@163.com> Acked-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> [bwh: Backported to 3.16: adjust filename] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 8149069db81853570a665f5e5648c0e526dc0e43 upstream.

The function p54p_probe takes an extra reference count of the PCI
device. However, the extra reference count is not dropped when it fails
to enable the PCI device. This patch fixes the bug.

Signed-off-by: Pan Bian <bianpan2016@163.com>
Acked-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
[bwh: Backported to 3.16: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
mwl8k: Fix rate_idx underflow 2019-09-23T20:11:52+00:00 Petr Štetiar ynezz@true.cz 2019-04-11T18:13:30+00:00 c4e8f65dc299b14f79a545748817be5ed48f0e0b commit 6b583201fa219b7b1b6aebd8966c8fd9357ef9f4 upstream. It was reported on OpenWrt bug tracking system[1], that several users are affected by the endless reboot of their routers if they configure 5GHz interface with channel 44 or 48. The reboot loop is caused by the following excessive number of WARN_ON messages: WARNING: CPU: 0 PID: 0 at backports-4.19.23-1/net/mac80211/rx.c:4516 ieee80211_rx_napi+0x1fc/0xa54 [mac80211] as the messages are being correctly emitted by the following guard: case RX_ENC_LEGACY: if (WARN_ON(status->rate_idx >= sband->n_bitrates)) as the rate_idx is in this case erroneously set to 251 (0xfb). This fix simply converts previously used magic number to proper constant and guards against substraction which is leading to the currently observed underflow. 1. https://bugs.openwrt.org/index.php?do=details&task_id=2218 Fixes: 854783444bab ("mwl8k: properly set receive status rate index on 5 GHz receive") Tested-by: Eubert Bao <bunnier@gmail.com> Reported-by: Eubert Bao <bunnier@gmail.com> Signed-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> [bwh: Backported to 3.16: adjust filename, context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 6b583201fa219b7b1b6aebd8966c8fd9357ef9f4 upstream.

It was reported on OpenWrt bug tracking system[1], that several users
are affected by the endless reboot of their routers if they configure
5GHz interface with channel 44 or 48.

The reboot loop is caused by the following excessive number of WARN_ON
messages:

 WARNING: CPU: 0 PID: 0 at backports-4.19.23-1/net/mac80211/rx.c:4516
                             ieee80211_rx_napi+0x1fc/0xa54 [mac80211]

as the messages are being correctly emitted by the following guard:

 case RX_ENC_LEGACY:
      if (WARN_ON(status->rate_idx >= sband->n_bitrates))

as the rate_idx is in this case erroneously set to 251 (0xfb). This fix
simply converts previously used magic number to proper constant and
guards against substraction which is leading to the currently observed
underflow.

1. https://bugs.openwrt.org/index.php?do=details&task_id=2218

Fixes: 854783444bab ("mwl8k: properly set receive status rate index on 5 GHz receive")
Tested-by: Eubert Bao <bunnier@gmail.com>
Reported-by: Eubert Bao <bunnier@gmail.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
[bwh: Backported to 3.16: adjust filename, context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
at76c50x-usb: Don't register led_trigger if usb_register_driver failed 2019-09-23T20:11:52+00:00 YueHaibing yuehaibing@huawei.com 2019-04-08T03:45:29+00:00 4a881abca144abc45f04b580fbadec879e4042f4 commit 09ac2694b0475f96be895848687ebcbba97eeecf upstream. Syzkaller report this: [ 1213.468581] BUG: unable to handle kernel paging request at fffffbfff83bf338 [ 1213.469530] #PF error: [normal kernel read fault] [ 1213.469530] PGD 237fe4067 P4D 237fe4067 PUD 237e60067 PMD 1c868b067 PTE 0 [ 1213.473514] Oops: 0000 [#1] SMP KASAN PTI [ 1213.473514] CPU: 0 PID: 6321 Comm: syz-executor.0 Tainted: G C 5.1.0-rc3+ #8 [ 1213.473514] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 1213.473514] RIP: 0010:strcmp+0x31/0xa0 [ 1213.473514] Code: 00 00 00 00 fc ff df 55 53 48 83 ec 08 eb 0a 84 db 48 89 ef 74 5a 4c 89 e6 48 89 f8 48 89 fa 48 8d 6f 01 48 c1 e8 03 83 e2 07 <42> 0f b6 04 28 38 d0 7f 04 84 c0 75 50 48 89 f0 48 89 f2 0f b6 5d [ 1213.473514] RSP: 0018:ffff8881f2b7f950 EFLAGS: 00010246 [ 1213.473514] RAX: 1ffffffff83bf338 RBX: ffff8881ea6f7240 RCX: ffffffff825350c6 [ 1213.473514] RDX: 0000000000000000 RSI: ffffffffc1ee19c0 RDI: ffffffffc1df99c0 [ 1213.473514] RBP: ffffffffc1df99c1 R08: 0000000000000001 R09: 0000000000000004 [ 1213.473514] R10: 0000000000000000 R11: ffff8881de353f00 R12: ffff8881ee727900 [ 1213.473514] R13: dffffc0000000000 R14: 0000000000000001 R15: ffffffffc1eeaaf0 [ 1213.473514] FS: 00007fa66fa01700(0000) GS:ffff8881f7200000(0000) knlGS:0000000000000000 [ 1213.473514] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1213.473514] CR2: fffffbfff83bf338 CR3: 00000001ebb9e005 CR4: 00000000007606f0 [ 1213.473514] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1213.473514] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1213.473514] PKRU: 55555554 [ 1213.473514] Call Trace: [ 1213.473514] led_trigger_register+0x112/0x3f0 [ 1213.473514] led_trigger_register_simple+0x7a/0x110 [ 1213.473514] ? 0xffffffffc1c10000 [ 1213.473514] at76_mod_init+0x77/0x1000 [at76c50x_usb] [ 1213.473514] do_one_initcall+0xbc/0x47d [ 1213.473514] ? perf_trace_initcall_level+0x3a0/0x3a0 [ 1213.473514] ? kasan_unpoison_shadow+0x30/0x40 [ 1213.473514] ? kasan_unpoison_shadow+0x30/0x40 [ 1213.473514] do_init_module+0x1b5/0x547 [ 1213.473514] load_module+0x6405/0x8c10 [ 1213.473514] ? module_frob_arch_sections+0x20/0x20 [ 1213.473514] ? kernel_read_file+0x1e6/0x5d0 [ 1213.473514] ? find_held_lock+0x32/0x1c0 [ 1213.473514] ? cap_capable+0x1ae/0x210 [ 1213.473514] ? __do_sys_finit_module+0x162/0x190 [ 1213.473514] __do_sys_finit_module+0x162/0x190 [ 1213.473514] ? __ia32_sys_init_module+0xa0/0xa0 [ 1213.473514] ? __mutex_unlock_slowpath+0xdc/0x690 [ 1213.473514] ? wait_for_completion+0x370/0x370 [ 1213.473514] ? vfs_write+0x204/0x4a0 [ 1213.473514] ? do_syscall_64+0x18/0x450 [ 1213.473514] do_syscall_64+0x9f/0x450 [ 1213.473514] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 1213.473514] RIP: 0033:0x462e99 [ 1213.473514] Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 [ 1213.473514] RSP: 002b:00007fa66fa00c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 1213.473514] RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 [ 1213.473514] RDX: 0000000000000000 RSI: 0000000020000300 RDI: 0000000000000003 [ 1213.473514] RBP: 00007fa66fa00c70 R08: 0000000000000000 R09: 0000000000000000 [ 1213.473514] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fa66fa016bc [ 1213.473514] R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004 If usb_register failed, no need to call led_trigger_register_simple. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 1264b951463a ("at76c50x-usb: add driver") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> [bwh: Backported to 3.16: adjust filename] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 09ac2694b0475f96be895848687ebcbba97eeecf upstream.

Syzkaller report this:

[ 1213.468581] BUG: unable to handle kernel paging request at fffffbfff83bf338
[ 1213.469530] #PF error: [normal kernel read fault]
[ 1213.469530] PGD 237fe4067 P4D 237fe4067 PUD 237e60067 PMD 1c868b067 PTE 0
[ 1213.473514] Oops: 0000 [#1] SMP KASAN PTI
[ 1213.473514] CPU: 0 PID: 6321 Comm: syz-executor.0 Tainted: G         C        5.1.0-rc3+ #8
[ 1213.473514] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[ 1213.473514] RIP: 0010:strcmp+0x31/0xa0
[ 1213.473514] Code: 00 00 00 00 fc ff df 55 53 48 83 ec 08 eb 0a 84 db 48 89 ef 74 5a 4c 89 e6 48 89 f8 48 89 fa 48 8d 6f 01 48 c1 e8 03 83 e2 07 <42> 0f b6 04 28 38 d0 7f 04 84 c0 75 50 48 89 f0 48 89 f2 0f b6 5d
[ 1213.473514] RSP: 0018:ffff8881f2b7f950 EFLAGS: 00010246
[ 1213.473514] RAX: 1ffffffff83bf338 RBX: ffff8881ea6f7240 RCX: ffffffff825350c6
[ 1213.473514] RDX: 0000000000000000 RSI: ffffffffc1ee19c0 RDI: ffffffffc1df99c0
[ 1213.473514] RBP: ffffffffc1df99c1 R08: 0000000000000001 R09: 0000000000000004
[ 1213.473514] R10: 0000000000000000 R11: ffff8881de353f00 R12: ffff8881ee727900
[ 1213.473514] R13: dffffc0000000000 R14: 0000000000000001 R15: ffffffffc1eeaaf0
[ 1213.473514] FS:  00007fa66fa01700(0000) GS:ffff8881f7200000(0000) knlGS:0000000000000000
[ 1213.473514] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1213.473514] CR2: fffffbfff83bf338 CR3: 00000001ebb9e005 CR4: 00000000007606f0
[ 1213.473514] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1213.473514] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 1213.473514] PKRU: 55555554
[ 1213.473514] Call Trace:
[ 1213.473514]  led_trigger_register+0x112/0x3f0
[ 1213.473514]  led_trigger_register_simple+0x7a/0x110
[ 1213.473514]  ? 0xffffffffc1c10000
[ 1213.473514]  at76_mod_init+0x77/0x1000 [at76c50x_usb]
[ 1213.473514]  do_one_initcall+0xbc/0x47d
[ 1213.473514]  ? perf_trace_initcall_level+0x3a0/0x3a0
[ 1213.473514]  ? kasan_unpoison_shadow+0x30/0x40
[ 1213.473514]  ? kasan_unpoison_shadow+0x30/0x40
[ 1213.473514]  do_init_module+0x1b5/0x547
[ 1213.473514]  load_module+0x6405/0x8c10
[ 1213.473514]  ? module_frob_arch_sections+0x20/0x20
[ 1213.473514]  ? kernel_read_file+0x1e6/0x5d0
[ 1213.473514]  ? find_held_lock+0x32/0x1c0
[ 1213.473514]  ? cap_capable+0x1ae/0x210
[ 1213.473514]  ? __do_sys_finit_module+0x162/0x190
[ 1213.473514]  __do_sys_finit_module+0x162/0x190
[ 1213.473514]  ? __ia32_sys_init_module+0xa0/0xa0
[ 1213.473514]  ? __mutex_unlock_slowpath+0xdc/0x690
[ 1213.473514]  ? wait_for_completion+0x370/0x370
[ 1213.473514]  ? vfs_write+0x204/0x4a0
[ 1213.473514]  ? do_syscall_64+0x18/0x450
[ 1213.473514]  do_syscall_64+0x9f/0x450
[ 1213.473514]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 1213.473514] RIP: 0033:0x462e99
[ 1213.473514] Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
[ 1213.473514] RSP: 002b:00007fa66fa00c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[ 1213.473514] RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99
[ 1213.473514] RDX: 0000000000000000 RSI: 0000000020000300 RDI: 0000000000000003
[ 1213.473514] RBP: 00007fa66fa00c70 R08: 0000000000000000 R09: 0000000000000000
[ 1213.473514] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fa66fa016bc
[ 1213.473514] R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004

If usb_register failed, no need to call led_trigger_register_simple.

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 1264b951463a ("at76c50x-usb: add driver")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
[bwh: Backported to 3.16: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
rt2x00: do not increment sequence number while re-transmitting 2019-08-13T11:39:06+00:00 Vijayakumar Durai vijayakumar.durai1@vivint.com 2019-03-27T10:03:17+00:00 8fe41e807bec8adf1a218c9f8113e23af2acb4c4 commit 746ba11f170603bf1eaade817553a6c2e9135bbe upstream. Currently rt2x00 devices retransmit the management frames with incremented sequence number if hardware is assigning the sequence. This is HW bug fixed already for non-QOS data frames, but it should be fixed for management frames except beacon. Without fix retransmitted frames have wrong SN: AlphaNet_e8:fb:36 Vivotek_52:31:51 Authentication, SN=1648, FN=0, Flags=........C Frame is not being retransmitted 1648 1 AlphaNet_e8:fb:36 Vivotek_52:31:51 Authentication, SN=1649, FN=0, Flags=....R...C Frame is being retransmitted 1649 1 AlphaNet_e8:fb:36 Vivotek_52:31:51 Authentication, SN=1650, FN=0, Flags=....R...C Frame is being retransmitted 1650 1 With the fix SN stays correctly the same: 88:6a:e3:e8:f9:a2 8c:f5:a3:88:76:87 Authentication, SN=1450, FN=0, Flags=........C 88:6a:e3:e8:f9:a2 8c:f5:a3:88:76:87 Authentication, SN=1450, FN=0, Flags=....R...C 88:6a:e3:e8:f9:a2 8c:f5:a3:88:76:87 Authentication, SN=1450, FN=0, Flags=....R...C Signed-off-by: Vijayakumar Durai <vijayakumar.durai1@vivint.com> [sgruszka: simplify code, change comments and changelog] Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> [bwh: Backported to 3.16: adjust filenames, context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 746ba11f170603bf1eaade817553a6c2e9135bbe upstream.

Currently rt2x00 devices retransmit the management frames with
incremented sequence number if hardware is assigning the sequence.

This is HW bug fixed already for non-QOS data frames, but it should
be fixed for management frames except beacon.

Without fix retransmitted frames have wrong SN:

 AlphaNet_e8:fb:36 Vivotek_52:31:51 Authentication, SN=1648, FN=0, Flags=........C Frame is not being retransmitted 1648 1
 AlphaNet_e8:fb:36 Vivotek_52:31:51 Authentication, SN=1649, FN=0, Flags=....R...C Frame is being retransmitted 1649 1
 AlphaNet_e8:fb:36 Vivotek_52:31:51 Authentication, SN=1650, FN=0, Flags=....R...C Frame is being retransmitted 1650 1

With the fix SN stays correctly the same:

 88:6a:e3:e8:f9:a2 8c:f5:a3:88:76:87 Authentication, SN=1450, FN=0, Flags=........C
 88:6a:e3:e8:f9:a2 8c:f5:a3:88:76:87 Authentication, SN=1450, FN=0, Flags=....R...C
 88:6a:e3:e8:f9:a2 8c:f5:a3:88:76:87 Authentication, SN=1450, FN=0, Flags=....R...C

Signed-off-by: Vijayakumar Durai <vijayakumar.durai1@vivint.com>
[sgruszka: simplify code, change comments and changelog]
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
[bwh: Backported to 3.16: adjust filenames, context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
mwifiex: Fix heap overflow in mwifiex_uap_parse_tail_ies() 2019-07-09T21:04:22+00:00 Takashi Iwai tiwai@suse.de 2019-05-31T13:18:41+00:00 a62393d7eb63bd075c51154002825cc7ab4dd3eb commit 69ae4f6aac1578575126319d3f55550e7e440449 upstream. A few places in mwifiex_uap_parse_tail_ies() perform memcpy() unconditionally, which may lead to either buffer overflow or read over boundary. This patch addresses the issues by checking the read size and the destination size at each place more properly. Along with the fixes, the patch cleans up the code slightly by introducing a temporary variable for the token size, and unifies the error path with the standard goto statement. Reported-by: huangwen <huangwen@venustech.com.cn> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> [bwh: Backported to 3.16: - The tail IEs are parsed in mwifiex_set_mgmt_ies, which looks for two specific IEs rather than looping - Check IE length against tail length after calling cfg80211_find_vendor_ie(), but not after cfg80211_find_ie() since that already does it - On error, return without calling mwifiex_set_mgmt_beacon_data_ies() - Drop inapplicable change to WMM IE handling - Adjust filename] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 69ae4f6aac1578575126319d3f55550e7e440449 upstream.

A few places in mwifiex_uap_parse_tail_ies() perform memcpy()
unconditionally, which may lead to either buffer overflow or read over
boundary.

This patch addresses the issues by checking the read size and the
destination size at each place more properly.  Along with the fixes,
the patch cleans up the code slightly by introducing a temporary
variable for the token size, and unifies the error path with the
standard goto statement.

Reported-by: huangwen <huangwen@venustech.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
[bwh: Backported to 3.16:
 - The tail IEs are parsed in mwifiex_set_mgmt_ies, which looks for two
   specific IEs rather than looping
 - Check IE length against tail length after calling
   cfg80211_find_vendor_ie(), but not after cfg80211_find_ie() since that
   already does it
 - On error, return without calling mwifiex_set_mgmt_beacon_data_ies()
 - Drop inapplicable change to WMM IE handling
 - Adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>