<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-stable.git/drivers/net/wireless, branch linux-4.1.y</title>
<subtitle>Linux kernel stable tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/'/>
<entry>
<title>Revert "ath10k: send (re)assoc peer command when NSS changed"</title>
<updated>2018-05-23T01:36:36+00:00</updated>
<author>
<name>Karthikeyan Periyasamy</name>
<email>periyasa@codeaurora.org</email>
</author>
<published>2018-03-27T08:25:29+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=e54942db9f715ed8f3fba65d042f7c1d4c0190d5'/>
<id>e54942db9f715ed8f3fba65d042f7c1d4c0190d5</id>
<content type='text'>
[ Upstream commit 55cc11da69895a680940c1733caabc37be685f5e ]

This reverts commit 55884c045d31a29cf69db8332d1064a1b61dd159.

When Ath10k is in AP mode and an unassociated STA sends a VHT action frame
(Operating Mode Notification for the NSS change) periodically to AP this causes
ath10k to call ath10k_station_assoc() which sends WMI_PEER_ASSOC_CMDID during
NSS update. Over the time (with a certain client it can happen within 15 mins
when there are over 500 of these VHT action frames) continuous calls of
WMI_PEER_ASSOC_CMDID cause firmware to assert due to resource exhaust.

To my knowledge setting WMI_PEER_NSS peer param itself enough to handle NSS
updates and no need to call ath10k_station_assoc(). So revert the original
commit from 2014 as it's unclear why the change was really needed.
Now the firmware assert doesn't happen anymore.

Issue observed in QCA9984 platform with firmware version:10.4-3.5.3-00053.
This Change tested in QCA9984 with firmware version: 10.4-3.5.3-00053 and
QCA988x platform with firmware version: 10.2.4-1.0-00036.

Firmware Assert log:

ath10k_pci 0002:01:00.0: firmware crashed! (guid e61f1274-9acd-4c5b-bcca-e032ea6e723c)
ath10k_pci 0002:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe
ath10k_pci 0002:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 1 testmode 1
ath10k_pci 0002:01:00.0: firmware ver 10.4-3.5.3-00053 api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast crc32 4c56a386
ath10k_pci 0002:01:00.0: board_file api 2 bmi_id 0:4 crc32 c2271344
ath10k_pci 0002:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal otp max-sta 512 raw 0 hwcrypto 1
ath10k_pci 0002:01:00.0: firmware register dump:
ath10k_pci 0002:01:00.0: [00]: 0x0000000A 0x000015B3 0x00981E5F 0x00975B31
ath10k_pci 0002:01:00.0: [04]: 0x00981E5F 0x00060530 0x00000011 0x00446C60
ath10k_pci 0002:01:00.0: [08]: 0x0042F1FC 0x00458080 0x00000017 0x00000000
ath10k_pci 0002:01:00.0: [12]: 0x00000009 0x00000000 0x00973ABC 0x00973AD2
ath10k_pci 0002:01:00.0: [16]: 0x00973AB0 0x00960E62 0x009606CA 0x00000000
ath10k_pci 0002:01:00.0: [20]: 0x40981E5F 0x004066DC 0x00400000 0x00981E34
ath10k_pci 0002:01:00.0: [24]: 0x80983B48 0x0040673C 0x000000C0 0xC0981E5F
ath10k_pci 0002:01:00.0: [28]: 0x80993DEB 0x0040676C 0x00431AB8 0x0045D0C4
ath10k_pci 0002:01:00.0: [32]: 0x80993E5C 0x004067AC 0x004303C0 0x0045D0C4
ath10k_pci 0002:01:00.0: [36]: 0x80994AAB 0x004067DC 0x00000000 0x0045D0C4
ath10k_pci 0002:01:00.0: [40]: 0x809971A0 0x0040681C 0x004303C0 0x00441B00
ath10k_pci 0002:01:00.0: [44]: 0x80991904 0x0040688C 0x004303C0 0x0045D0C4
ath10k_pci 0002:01:00.0: [48]: 0x80963AD3 0x00406A7C 0x004303C0 0x009918FC
ath10k_pci 0002:01:00.0: [52]: 0x80960E80 0x00406A9C 0x0000001F 0x00400000
ath10k_pci 0002:01:00.0: [56]: 0x80960E51 0x00406ACC 0x00400000 0x00000000
ath10k_pci 0002:01:00.0: Copy Engine register dump:
ath10k_pci 0002:01:00.0: index: addr: sr_wr_idx: sr_r_idx: dst_wr_idx: dst_r_idx:
ath10k_pci 0002:01:00.0: [00]: 0x0004a000 15 15 3 3
ath10k_pci 0002:01:00.0: [01]: 0x0004a400 17 17 212 213
ath10k_pci 0002:01:00.0: [02]: 0x0004a800 21 21 20 21
ath10k_pci 0002:01:00.0: [03]: 0x0004ac00 25 25 27 25
ath10k_pci 0002:01:00.0: [04]: 0x0004b000 515 515 144 104
ath10k_pci 0002:01:00.0: [05]: 0x0004b400 28 28 155 156
ath10k_pci 0002:01:00.0: [06]: 0x0004b800 12 12 12 12
ath10k_pci 0002:01:00.0: [07]: 0x0004bc00 1 1 1 1
ath10k_pci 0002:01:00.0: [08]: 0x0004c000 0 0 127 0
ath10k_pci 0002:01:00.0: [09]: 0x0004c400 1 1 1 1
ath10k_pci 0002:01:00.0: [10]: 0x0004c800 0 0 0 0
ath10k_pci 0002:01:00.0: [11]: 0x0004cc00 0 0 0 0
ath10k_pci 0002:01:00.0: CE[1] write_index 212 sw_index 213 hw_index 0 nentries_mask 0x000001ff
ath10k_pci 0002:01:00.0: CE[2] write_index 20 sw_index 21 hw_index 0 nentries_mask 0x0000007f
ath10k_pci 0002:01:00.0: CE[5] write_index 155 sw_index 156 hw_index 0 nentries_mask 0x000001ff
ath10k_pci 0002:01:00.0: DMA addr: nbytes: meta data: byte swap: gather:
ath10k_pci 0002:01:00.0: [455]: 0x580c0042 0 0 0 0
ath10k_pci 0002:01:00.0: [456]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [457]: 0x580c0042 0 0 0 0
ath10k_pci 0002:01:00.0: [458]: 0x594a0038 0 0 0 1
ath10k_pci 0002:01:00.0: [459]: 0x580c0a42 0 0 0 0
ath10k_pci 0002:01:00.0: [460]: 0x594a0060 0 0 0 1
ath10k_pci 0002:01:00.0: [461]: 0x580c0c42 0 0 0 0
ath10k_pci 0002:01:00.0: [462]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [463]: 0x580c0c42 0 0 0 0
ath10k_pci 0002:01:00.0: [464]: 0x594a0038 0 0 0 1
ath10k_pci 0002:01:00.0: [465]: 0x580c0a42 0 0 0 0
ath10k_pci 0002:01:00.0: [466]: 0x594a0060 0 0 0 1
ath10k_pci 0002:01:00.0: [467]: 0x580c0042 0 0 0 0
ath10k_pci 0002:01:00.0: [468]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [469]: 0x580c1c42 0 0 0 0
ath10k_pci 0002:01:00.0: [470]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [471]: 0x580c1c42 0 0 0 0
ath10k_pci 0002:01:00.0: [472]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [473]: 0x580c1c42 0 0 0 0
ath10k_pci 0002:01:00.0: [474]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [475]: 0x580c0642 0 0 0 0
ath10k_pci 0002:01:00.0: [476]: 0x594a0038 0 0 0 1
ath10k_pci 0002:01:00.0: [477]: 0x580c0842 0 0 0 0
ath10k_pci 0002:01:00.0: [478]: 0x594a0060 0 0 0 1
ath10k_pci 0002:01:00.0: [479]: 0x580c0042 0 0 0 0
ath10k_pci 0002:01:00.0: [480]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [481]: 0x580c0042 0 0 0 0
ath10k_pci 0002:01:00.0: [482]: 0x594a0038 0 0 0 1
ath10k_pci 0002:01:00.0: [483]: 0x580c0842 0 0 0 0
ath10k_pci 0002:01:00.0: [484]: 0x594a0060 0 0 0 1
ath10k_pci 0002:01:00.0: [485]: 0x580c0642 0 0 0 0
ath10k_pci 0002:01:00.0: [486]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [487]: 0x580c0642 0 0 0 0
ath10k_pci 0002:01:00.0: [488]: 0x594a0038 0 0 0 1
ath10k_pci 0002:01:00.0: [489]: 0x580c0842 0 0 0 0
ath10k_pci 0002:01:00.0: [490]: 0x594a0060 0 0 0 1
ath10k_pci 0002:01:00.0: [491]: 0x580c0042 0 0 0 0
ath10k_pci 0002:01:00.0: [492]: 0x58174040 0 1 0 0
ath10k_pci 0002:01:00.0: [493]: 0x5a946040 0 1 0 0
ath10k_pci 0002:01:00.0: [494]: 0x59909040 0 1 0 0
ath10k_pci 0002:01:00.0: [495]: 0x5ae5a040 0 1 0 0
ath10k_pci 0002:01:00.0: [496]: 0x58096040 0 1 0 0
ath10k_pci 0002:01:00.0: [497]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [498]: 0x580c0642 0 0 0 0
ath10k_pci 0002:01:00.0: [499]: 0x5c1e0040 0 1 0 0
ath10k_pci 0002:01:00.0: [500]: 0x58153040 0 1 0 0
ath10k_pci 0002:01:00.0: [501]: 0x58129040 0 1 0 0
ath10k_pci 0002:01:00.0: [502]: 0x5952f040 0 1 0 0
ath10k_pci 0002:01:00.0: [503]: 0x59535040 0 1 0 0
ath10k_pci 0002:01:00.0: [504]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [505]: 0x580c0042 0 0 0 0
ath10k_pci 0002:01:00.0: [506]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [507]: 0x580c0042 0 0 0 0
ath10k_pci 0002:01:00.0: [508]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [509]: 0x580c0042 0 0 0 0
ath10k_pci 0002:01:00.0: [510]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [511]: 0x580c0042 0 0 0 0
ath10k_pci 0002:01:00.0: [512]: 0x5adcc040 0 1 0 0
ath10k_pci 0002:01:00.0: [513]: 0x5cf3d040 0 1 0 0
ath10k_pci 0002:01:00.0: [514]: 0x5c1e9040 64 1 0 0
ath10k_pci 0002:01:00.0: [515]: 0x00000000 0 0 0 0

Signed-off-by: Karthikeyan Periyasamy &lt;periyasa@codeaurora.org&gt;
Signed-off-by: Kalle Valo &lt;kvalo@codeaurora.org&gt;
Signed-off-by: Sasha Levin &lt;alexander.levin@microsoft.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 55cc11da69895a680940c1733caabc37be685f5e ]

This reverts commit 55884c045d31a29cf69db8332d1064a1b61dd159.

When Ath10k is in AP mode and an unassociated STA sends a VHT action frame
(Operating Mode Notification for the NSS change) periodically to AP this causes
ath10k to call ath10k_station_assoc() which sends WMI_PEER_ASSOC_CMDID during
NSS update. Over the time (with a certain client it can happen within 15 mins
when there are over 500 of these VHT action frames) continuous calls of
WMI_PEER_ASSOC_CMDID cause firmware to assert due to resource exhaust.

To my knowledge setting WMI_PEER_NSS peer param itself enough to handle NSS
updates and no need to call ath10k_station_assoc(). So revert the original
commit from 2014 as it's unclear why the change was really needed.
Now the firmware assert doesn't happen anymore.

Issue observed in QCA9984 platform with firmware version:10.4-3.5.3-00053.
This Change tested in QCA9984 with firmware version: 10.4-3.5.3-00053 and
QCA988x platform with firmware version: 10.2.4-1.0-00036.

Firmware Assert log:

ath10k_pci 0002:01:00.0: firmware crashed! (guid e61f1274-9acd-4c5b-bcca-e032ea6e723c)
ath10k_pci 0002:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe
ath10k_pci 0002:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 1 testmode 1
ath10k_pci 0002:01:00.0: firmware ver 10.4-3.5.3-00053 api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast crc32 4c56a386
ath10k_pci 0002:01:00.0: board_file api 2 bmi_id 0:4 crc32 c2271344
ath10k_pci 0002:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal otp max-sta 512 raw 0 hwcrypto 1
ath10k_pci 0002:01:00.0: firmware register dump:
ath10k_pci 0002:01:00.0: [00]: 0x0000000A 0x000015B3 0x00981E5F 0x00975B31
ath10k_pci 0002:01:00.0: [04]: 0x00981E5F 0x00060530 0x00000011 0x00446C60
ath10k_pci 0002:01:00.0: [08]: 0x0042F1FC 0x00458080 0x00000017 0x00000000
ath10k_pci 0002:01:00.0: [12]: 0x00000009 0x00000000 0x00973ABC 0x00973AD2
ath10k_pci 0002:01:00.0: [16]: 0x00973AB0 0x00960E62 0x009606CA 0x00000000
ath10k_pci 0002:01:00.0: [20]: 0x40981E5F 0x004066DC 0x00400000 0x00981E34
ath10k_pci 0002:01:00.0: [24]: 0x80983B48 0x0040673C 0x000000C0 0xC0981E5F
ath10k_pci 0002:01:00.0: [28]: 0x80993DEB 0x0040676C 0x00431AB8 0x0045D0C4
ath10k_pci 0002:01:00.0: [32]: 0x80993E5C 0x004067AC 0x004303C0 0x0045D0C4
ath10k_pci 0002:01:00.0: [36]: 0x80994AAB 0x004067DC 0x00000000 0x0045D0C4
ath10k_pci 0002:01:00.0: [40]: 0x809971A0 0x0040681C 0x004303C0 0x00441B00
ath10k_pci 0002:01:00.0: [44]: 0x80991904 0x0040688C 0x004303C0 0x0045D0C4
ath10k_pci 0002:01:00.0: [48]: 0x80963AD3 0x00406A7C 0x004303C0 0x009918FC
ath10k_pci 0002:01:00.0: [52]: 0x80960E80 0x00406A9C 0x0000001F 0x00400000
ath10k_pci 0002:01:00.0: [56]: 0x80960E51 0x00406ACC 0x00400000 0x00000000
ath10k_pci 0002:01:00.0: Copy Engine register dump:
ath10k_pci 0002:01:00.0: index: addr: sr_wr_idx: sr_r_idx: dst_wr_idx: dst_r_idx:
ath10k_pci 0002:01:00.0: [00]: 0x0004a000 15 15 3 3
ath10k_pci 0002:01:00.0: [01]: 0x0004a400 17 17 212 213
ath10k_pci 0002:01:00.0: [02]: 0x0004a800 21 21 20 21
ath10k_pci 0002:01:00.0: [03]: 0x0004ac00 25 25 27 25
ath10k_pci 0002:01:00.0: [04]: 0x0004b000 515 515 144 104
ath10k_pci 0002:01:00.0: [05]: 0x0004b400 28 28 155 156
ath10k_pci 0002:01:00.0: [06]: 0x0004b800 12 12 12 12
ath10k_pci 0002:01:00.0: [07]: 0x0004bc00 1 1 1 1
ath10k_pci 0002:01:00.0: [08]: 0x0004c000 0 0 127 0
ath10k_pci 0002:01:00.0: [09]: 0x0004c400 1 1 1 1
ath10k_pci 0002:01:00.0: [10]: 0x0004c800 0 0 0 0
ath10k_pci 0002:01:00.0: [11]: 0x0004cc00 0 0 0 0
ath10k_pci 0002:01:00.0: CE[1] write_index 212 sw_index 213 hw_index 0 nentries_mask 0x000001ff
ath10k_pci 0002:01:00.0: CE[2] write_index 20 sw_index 21 hw_index 0 nentries_mask 0x0000007f
ath10k_pci 0002:01:00.0: CE[5] write_index 155 sw_index 156 hw_index 0 nentries_mask 0x000001ff
ath10k_pci 0002:01:00.0: DMA addr: nbytes: meta data: byte swap: gather:
ath10k_pci 0002:01:00.0: [455]: 0x580c0042 0 0 0 0
ath10k_pci 0002:01:00.0: [456]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [457]: 0x580c0042 0 0 0 0
ath10k_pci 0002:01:00.0: [458]: 0x594a0038 0 0 0 1
ath10k_pci 0002:01:00.0: [459]: 0x580c0a42 0 0 0 0
ath10k_pci 0002:01:00.0: [460]: 0x594a0060 0 0 0 1
ath10k_pci 0002:01:00.0: [461]: 0x580c0c42 0 0 0 0
ath10k_pci 0002:01:00.0: [462]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [463]: 0x580c0c42 0 0 0 0
ath10k_pci 0002:01:00.0: [464]: 0x594a0038 0 0 0 1
ath10k_pci 0002:01:00.0: [465]: 0x580c0a42 0 0 0 0
ath10k_pci 0002:01:00.0: [466]: 0x594a0060 0 0 0 1
ath10k_pci 0002:01:00.0: [467]: 0x580c0042 0 0 0 0
ath10k_pci 0002:01:00.0: [468]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [469]: 0x580c1c42 0 0 0 0
ath10k_pci 0002:01:00.0: [470]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [471]: 0x580c1c42 0 0 0 0
ath10k_pci 0002:01:00.0: [472]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [473]: 0x580c1c42 0 0 0 0
ath10k_pci 0002:01:00.0: [474]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [475]: 0x580c0642 0 0 0 0
ath10k_pci 0002:01:00.0: [476]: 0x594a0038 0 0 0 1
ath10k_pci 0002:01:00.0: [477]: 0x580c0842 0 0 0 0
ath10k_pci 0002:01:00.0: [478]: 0x594a0060 0 0 0 1
ath10k_pci 0002:01:00.0: [479]: 0x580c0042 0 0 0 0
ath10k_pci 0002:01:00.0: [480]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [481]: 0x580c0042 0 0 0 0
ath10k_pci 0002:01:00.0: [482]: 0x594a0038 0 0 0 1
ath10k_pci 0002:01:00.0: [483]: 0x580c0842 0 0 0 0
ath10k_pci 0002:01:00.0: [484]: 0x594a0060 0 0 0 1
ath10k_pci 0002:01:00.0: [485]: 0x580c0642 0 0 0 0
ath10k_pci 0002:01:00.0: [486]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [487]: 0x580c0642 0 0 0 0
ath10k_pci 0002:01:00.0: [488]: 0x594a0038 0 0 0 1
ath10k_pci 0002:01:00.0: [489]: 0x580c0842 0 0 0 0
ath10k_pci 0002:01:00.0: [490]: 0x594a0060 0 0 0 1
ath10k_pci 0002:01:00.0: [491]: 0x580c0042 0 0 0 0
ath10k_pci 0002:01:00.0: [492]: 0x58174040 0 1 0 0
ath10k_pci 0002:01:00.0: [493]: 0x5a946040 0 1 0 0
ath10k_pci 0002:01:00.0: [494]: 0x59909040 0 1 0 0
ath10k_pci 0002:01:00.0: [495]: 0x5ae5a040 0 1 0 0
ath10k_pci 0002:01:00.0: [496]: 0x58096040 0 1 0 0
ath10k_pci 0002:01:00.0: [497]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [498]: 0x580c0642 0 0 0 0
ath10k_pci 0002:01:00.0: [499]: 0x5c1e0040 0 1 0 0
ath10k_pci 0002:01:00.0: [500]: 0x58153040 0 1 0 0
ath10k_pci 0002:01:00.0: [501]: 0x58129040 0 1 0 0
ath10k_pci 0002:01:00.0: [502]: 0x5952f040 0 1 0 0
ath10k_pci 0002:01:00.0: [503]: 0x59535040 0 1 0 0
ath10k_pci 0002:01:00.0: [504]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [505]: 0x580c0042 0 0 0 0
ath10k_pci 0002:01:00.0: [506]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [507]: 0x580c0042 0 0 0 0
ath10k_pci 0002:01:00.0: [508]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [509]: 0x580c0042 0 0 0 0
ath10k_pci 0002:01:00.0: [510]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [511]: 0x580c0042 0 0 0 0
ath10k_pci 0002:01:00.0: [512]: 0x5adcc040 0 1 0 0
ath10k_pci 0002:01:00.0: [513]: 0x5cf3d040 0 1 0 0
ath10k_pci 0002:01:00.0: [514]: 0x5c1e9040 64 1 0 0
ath10k_pci 0002:01:00.0: [515]: 0x00000000 0 0 0 0

Signed-off-by: Karthikeyan Periyasamy &lt;periyasa@codeaurora.org&gt;
Signed-off-by: Kalle Valo &lt;kvalo@codeaurora.org&gt;
Signed-off-by: Sasha Levin &lt;alexander.levin@microsoft.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ath9k_hw: check if the chip failed to wake up</title>
<updated>2018-05-23T01:36:36+00:00</updated>
<author>
<name>Felix Fietkau</name>
<email>nbd@nbd.name</email>
</author>
<published>2017-02-02T09:14:51+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=858463ce794f5ae28c23cd43ab91db021b1adaf2'/>
<id>858463ce794f5ae28c23cd43ab91db021b1adaf2</id>
<content type='text'>
[ Upstream commit a34d0a0da1abae46a5f6ebd06fb0ec484ca099d9 ]

In an RFC patch, Sven Eckelmann and Simon Wunderlich reported:

"QCA 802.11n chips (especially AR9330/AR9340) sometimes end up in a
state in which a read of AR_CFG always returns 0xdeadbeef.
This should not happen when when the power_mode of the device is
ATH9K_PM_AWAKE."

Include the check for the default register state in the existing MAC
hang check.

Signed-off-by: Felix Fietkau &lt;nbd@nbd.name&gt;
Signed-off-by: Kalle Valo &lt;kvalo@qca.qualcomm.com&gt;
Signed-off-by: Sasha Levin &lt;alexander.levin@microsoft.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit a34d0a0da1abae46a5f6ebd06fb0ec484ca099d9 ]

In an RFC patch, Sven Eckelmann and Simon Wunderlich reported:

"QCA 802.11n chips (especially AR9330/AR9340) sometimes end up in a
state in which a read of AR_CFG always returns 0xdeadbeef.
This should not happen when when the power_mode of the device is
ATH9K_PM_AWAKE."

Include the check for the default register state in the existing MAC
hang check.

Signed-off-by: Felix Fietkau &lt;nbd@nbd.name&gt;
Signed-off-by: Kalle Valo &lt;kvalo@qca.qualcomm.com&gt;
Signed-off-by: Sasha Levin &lt;alexander.levin@microsoft.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>rtl8187: Fix NULL pointer dereference in priv-&gt;conf_mutex</title>
<updated>2018-05-23T01:36:31+00:00</updated>
<author>
<name>Sudhir Sreedharan</name>
<email>ssreedharan@mvista.com</email>
</author>
<published>2018-02-15T07:22:45+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=70a9d9bd6de74bd2e366a330bfc8e1c94385bb6a'/>
<id>70a9d9bd6de74bd2e366a330bfc8e1c94385bb6a</id>
<content type='text'>
[ Upstream commit 7972326a26b5bf8dc2adac575c4e03ee7e9d193a ]

This can be reproduced by bind/unbind the driver multiple times
in AM3517 board.

Analysis revealed that rtl8187_start() was invoked before probe
finishes(ie. before the mutex is initialized).

 INFO: trying to register non-static key.
 the code is fine but needs lockdep annotation.
 turning off the locking correctness validator.
 CPU: 0 PID: 821 Comm: wpa_supplicant Not tainted 4.9.80-dirty #250
 Hardware name: Generic AM3517 (Flattened Device Tree)
 [&lt;c010e0d8&gt;] (unwind_backtrace) from [&lt;c010beac&gt;] (show_stack+0x10/0x14)
 [&lt;c010beac&gt;] (show_stack) from [&lt;c017401c&gt;] (register_lock_class+0x4f4/0x55c)
 [&lt;c017401c&gt;] (register_lock_class) from [&lt;c0176fe0&gt;] (__lock_acquire+0x74/0x1938)
 [&lt;c0176fe0&gt;] (__lock_acquire) from [&lt;c0178cfc&gt;] (lock_acquire+0xfc/0x23c)
 [&lt;c0178cfc&gt;] (lock_acquire) from [&lt;c08aa2f8&gt;] (mutex_lock_nested+0x50/0x3b0)
 [&lt;c08aa2f8&gt;] (mutex_lock_nested) from [&lt;c05f5bf8&gt;] (rtl8187_start+0x2c/0xd54)
 [&lt;c05f5bf8&gt;] (rtl8187_start) from [&lt;c082dea0&gt;] (drv_start+0xa8/0x320)
 [&lt;c082dea0&gt;] (drv_start) from [&lt;c084d1d4&gt;] (ieee80211_do_open+0x2bc/0x8e4)
 [&lt;c084d1d4&gt;] (ieee80211_do_open) from [&lt;c069be94&gt;] (__dev_open+0xb8/0x120)
 [&lt;c069be94&gt;] (__dev_open) from [&lt;c069c11c&gt;] (__dev_change_flags+0x88/0x14c)
 [&lt;c069c11c&gt;] (__dev_change_flags) from [&lt;c069c1f8&gt;] (dev_change_flags+0x18/0x48)
 [&lt;c069c1f8&gt;] (dev_change_flags) from [&lt;c0710b08&gt;] (devinet_ioctl+0x738/0x840)
 [&lt;c0710b08&gt;] (devinet_ioctl) from [&lt;c067925c&gt;] (sock_ioctl+0x164/0x2f4)
 [&lt;c067925c&gt;] (sock_ioctl) from [&lt;c02883f8&gt;] (do_vfs_ioctl+0x8c/0x9d0)
 [&lt;c02883f8&gt;] (do_vfs_ioctl) from [&lt;c0288da8&gt;] (SyS_ioctl+0x6c/0x7c)
 [&lt;c0288da8&gt;] (SyS_ioctl) from [&lt;c0107760&gt;] (ret_fast_syscall+0x0/0x1c)
 Unable to handle kernel NULL pointer dereference at virtual address 00000000
 pgd = cd1ec000
 [00000000] *pgd=8d1de831, *pte=00000000, *ppte=00000000
 Internal error: Oops: 817 [#1] PREEMPT ARM
 Modules linked in:
 CPU: 0 PID: 821 Comm: wpa_supplicant Not tainted 4.9.80-dirty #250
 Hardware name: Generic AM3517 (Flattened Device Tree)
 task: ce73eec0 task.stack: cd1ea000
 PC is at mutex_lock_nested+0xe8/0x3b0
 LR is at mutex_lock_nested+0xd0/0x3b0

Cc: stable@vger.kernel.org
Signed-off-by: Sudhir Sreedharan &lt;ssreedharan@mvista.com&gt;
Signed-off-by: Kalle Valo &lt;kvalo@codeaurora.org&gt;
Signed-off-by: Sasha Levin &lt;alexander.levin@microsoft.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 7972326a26b5bf8dc2adac575c4e03ee7e9d193a ]

This can be reproduced by bind/unbind the driver multiple times
in AM3517 board.

Analysis revealed that rtl8187_start() was invoked before probe
finishes(ie. before the mutex is initialized).

 INFO: trying to register non-static key.
 the code is fine but needs lockdep annotation.
 turning off the locking correctness validator.
 CPU: 0 PID: 821 Comm: wpa_supplicant Not tainted 4.9.80-dirty #250
 Hardware name: Generic AM3517 (Flattened Device Tree)
 [&lt;c010e0d8&gt;] (unwind_backtrace) from [&lt;c010beac&gt;] (show_stack+0x10/0x14)
 [&lt;c010beac&gt;] (show_stack) from [&lt;c017401c&gt;] (register_lock_class+0x4f4/0x55c)
 [&lt;c017401c&gt;] (register_lock_class) from [&lt;c0176fe0&gt;] (__lock_acquire+0x74/0x1938)
 [&lt;c0176fe0&gt;] (__lock_acquire) from [&lt;c0178cfc&gt;] (lock_acquire+0xfc/0x23c)
 [&lt;c0178cfc&gt;] (lock_acquire) from [&lt;c08aa2f8&gt;] (mutex_lock_nested+0x50/0x3b0)
 [&lt;c08aa2f8&gt;] (mutex_lock_nested) from [&lt;c05f5bf8&gt;] (rtl8187_start+0x2c/0xd54)
 [&lt;c05f5bf8&gt;] (rtl8187_start) from [&lt;c082dea0&gt;] (drv_start+0xa8/0x320)
 [&lt;c082dea0&gt;] (drv_start) from [&lt;c084d1d4&gt;] (ieee80211_do_open+0x2bc/0x8e4)
 [&lt;c084d1d4&gt;] (ieee80211_do_open) from [&lt;c069be94&gt;] (__dev_open+0xb8/0x120)
 [&lt;c069be94&gt;] (__dev_open) from [&lt;c069c11c&gt;] (__dev_change_flags+0x88/0x14c)
 [&lt;c069c11c&gt;] (__dev_change_flags) from [&lt;c069c1f8&gt;] (dev_change_flags+0x18/0x48)
 [&lt;c069c1f8&gt;] (dev_change_flags) from [&lt;c0710b08&gt;] (devinet_ioctl+0x738/0x840)
 [&lt;c0710b08&gt;] (devinet_ioctl) from [&lt;c067925c&gt;] (sock_ioctl+0x164/0x2f4)
 [&lt;c067925c&gt;] (sock_ioctl) from [&lt;c02883f8&gt;] (do_vfs_ioctl+0x8c/0x9d0)
 [&lt;c02883f8&gt;] (do_vfs_ioctl) from [&lt;c0288da8&gt;] (SyS_ioctl+0x6c/0x7c)
 [&lt;c0288da8&gt;] (SyS_ioctl) from [&lt;c0107760&gt;] (ret_fast_syscall+0x0/0x1c)
 Unable to handle kernel NULL pointer dereference at virtual address 00000000
 pgd = cd1ec000
 [00000000] *pgd=8d1de831, *pte=00000000, *ppte=00000000
 Internal error: Oops: 817 [#1] PREEMPT ARM
 Modules linked in:
 CPU: 0 PID: 821 Comm: wpa_supplicant Not tainted 4.9.80-dirty #250
 Hardware name: Generic AM3517 (Flattened Device Tree)
 task: ce73eec0 task.stack: cd1ea000
 PC is at mutex_lock_nested+0xe8/0x3b0
 LR is at mutex_lock_nested+0xd0/0x3b0

Cc: stable@vger.kernel.org
Signed-off-by: Sudhir Sreedharan &lt;ssreedharan@mvista.com&gt;
Signed-off-by: Kalle Valo &lt;kvalo@codeaurora.org&gt;
Signed-off-by: Sasha Levin &lt;alexander.levin@microsoft.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>wl1251: check return from call to wl1251_acx_arp_ip_filter</title>
<updated>2018-05-23T01:36:26+00:00</updated>
<author>
<name>Colin Ian King</name>
<email>colin.king@canonical.com</email>
</author>
<published>2017-12-26T17:33:18+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=1450502513acc82462c8fa9d52ccfcad8ef1c390'/>
<id>1450502513acc82462c8fa9d52ccfcad8ef1c390</id>
<content type='text'>
[ Upstream commit ac1181c60822292176ab96912208ec9f9819faf8 ]

Currently the less than zero error check on ret is incorrect
as it is checking a far earlier ret assignment rather than the
return from the call to wl1251_acx_arp_ip_filter. Fix this by
adding in the missing assginment.

Detected by CoverityScan, CID#1164835 ("Logically dead code")

Fixes: 204cc5c44fb6 ("wl1251: implement hardware ARP filtering")
Signed-off-by: Colin Ian King &lt;colin.king@canonical.com&gt;
Signed-off-by: Kalle Valo &lt;kvalo@codeaurora.org&gt;
Signed-off-by: Sasha Levin &lt;alexander.levin@microsoft.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit ac1181c60822292176ab96912208ec9f9819faf8 ]

Currently the less than zero error check on ret is incorrect
as it is checking a far earlier ret assignment rather than the
return from the call to wl1251_acx_arp_ip_filter. Fix this by
adding in the missing assginment.

Detected by CoverityScan, CID#1164835 ("Logically dead code")

Fixes: 204cc5c44fb6 ("wl1251: implement hardware ARP filtering")
Signed-off-by: Colin Ian King &lt;colin.king@canonical.com&gt;
Signed-off-by: Kalle Valo &lt;kvalo@codeaurora.org&gt;
Signed-off-by: Sasha Levin &lt;alexander.levin@microsoft.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ray_cs: Avoid reading past end of buffer</title>
<updated>2018-05-23T01:36:25+00:00</updated>
<author>
<name>Kees Cook</name>
<email>keescook@chromium.org</email>
</author>
<published>2017-05-05T22:38:41+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=5e2eee8e54bd31ede9110a6a4c620d07203a866b'/>
<id>5e2eee8e54bd31ede9110a6a4c620d07203a866b</id>
<content type='text'>
[ Upstream commit e48d661eb13f2f83861428f001c567fdb3f317e8 ]

Using memcpy() from a buffer that is shorter than the length copied means
the destination buffer is being filled with arbitrary data from the kernel
rodata segment. In this case, the source was made longer, since it did not
match the destination structure size. Additionally removes a needless cast.

This was found with the future CONFIG_FORTIFY_SOURCE feature.

Cc: Daniel Micay &lt;danielmicay@gmail.com&gt;
Signed-off-by: Kees Cook &lt;keescook@chromium.org&gt;
Signed-off-by: Kalle Valo &lt;kvalo@codeaurora.org&gt;
Signed-off-by: Sasha Levin &lt;alexander.levin@microsoft.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit e48d661eb13f2f83861428f001c567fdb3f317e8 ]

Using memcpy() from a buffer that is shorter than the length copied means
the destination buffer is being filled with arbitrary data from the kernel
rodata segment. In this case, the source was made longer, since it did not
match the destination structure size. Additionally removes a needless cast.

This was found with the future CONFIG_FORTIFY_SOURCE feature.

Cc: Daniel Micay &lt;danielmicay@gmail.com&gt;
Signed-off-by: Kees Cook &lt;keescook@chromium.org&gt;
Signed-off-by: Kalle Valo &lt;kvalo@codeaurora.org&gt;
Signed-off-by: Sasha Levin &lt;alexander.levin@microsoft.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ath5k: fix memory leak on buf on failed eeprom read</title>
<updated>2018-05-23T01:36:25+00:00</updated>
<author>
<name>Colin Ian King</name>
<email>colin.king@canonical.com</email>
</author>
<published>2017-05-03T14:26:00+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=7a43a45f7a96bb166348116963d3536644a63cc2'/>
<id>7a43a45f7a96bb166348116963d3536644a63cc2</id>
<content type='text'>
[ Upstream commit 8fed6823e06e43ee9cf7c0ffecec2f9111ce6201 ]

The AR5K_EEPROM_READ macro returns with -EIO if a read error
occurs causing a memory leak on the allocated buffer buf. Fix
this by explicitly calling ath5k_hw_nvram_read and exiting on
the via the freebuf label that performs the necessary free'ing
of buf when a read error occurs.

Detected by CoverityScan, CID#1248782 ("Resource Leak")

Signed-off-by: Colin Ian King &lt;colin.king@canonical.com&gt;
Signed-off-by: Kalle Valo &lt;kvalo@qca.qualcomm.com&gt;
Signed-off-by: Sasha Levin &lt;alexander.levin@microsoft.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 8fed6823e06e43ee9cf7c0ffecec2f9111ce6201 ]

The AR5K_EEPROM_READ macro returns with -EIO if a read error
occurs causing a memory leak on the allocated buffer buf. Fix
this by explicitly calling ath5k_hw_nvram_read and exiting on
the via the freebuf label that performs the necessary free'ing
of buf when a read error occurs.

Detected by CoverityScan, CID#1248782 ("Resource Leak")

Signed-off-by: Colin Ian King &lt;colin.king@canonical.com&gt;
Signed-off-by: Kalle Valo &lt;kvalo@qca.qualcomm.com&gt;
Signed-off-by: Sasha Levin &lt;alexander.levin@microsoft.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>brcmfmac: fix P2P_DEVICE ethernet address generation</title>
<updated>2018-05-23T01:33:53+00:00</updated>
<author>
<name>Arend Van Spriel</name>
<email>arend.vanspriel@broadcom.com</email>
</author>
<published>2018-02-28T20:15:20+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=dbd9dbe063409cfb5740b21468fabb09fde69c8f'/>
<id>dbd9dbe063409cfb5740b21468fabb09fde69c8f</id>
<content type='text'>
[ Upstream commit 455f3e76cfc0d893585a5f358b9ddbe9c1e1e53b ]

The firmware has a requirement that the P2P_DEVICE address should
be different from the address of the primary interface. When not
specified by user-space, the driver generates the MAC address for
the P2P_DEVICE interface using the MAC address of the primary
interface and setting the locally administered bit. However, the MAC
address of the primary interface may already have that bit set causing
the creation of the P2P_DEVICE interface to fail with -EBUSY. Fix this
by using a random address instead to determine the P2P_DEVICE address.

Cc: stable@vger.kernel.org # 3.10.y
Reported-by: Hans de Goede &lt;hdegoede@redhat.com&gt;
Reviewed-by: Hante Meuleman &lt;hante.meuleman@broadcom.com&gt;
Reviewed-by: Pieter-Paul Giesberts &lt;pieter-paul.giesberts@broadcom.com&gt;
Reviewed-by: Franky Lin &lt;franky.lin@broadcom.com&gt;
Signed-off-by: Arend van Spriel &lt;arend.vanspriel@broadcom.com&gt;
Signed-off-by: Kalle Valo &lt;kvalo@codeaurora.org&gt;
Signed-off-by: Sasha Levin &lt;alexander.levin@microsoft.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 455f3e76cfc0d893585a5f358b9ddbe9c1e1e53b ]

The firmware has a requirement that the P2P_DEVICE address should
be different from the address of the primary interface. When not
specified by user-space, the driver generates the MAC address for
the P2P_DEVICE interface using the MAC address of the primary
interface and setting the locally administered bit. However, the MAC
address of the primary interface may already have that bit set causing
the creation of the P2P_DEVICE interface to fail with -EBUSY. Fix this
by using a random address instead to determine the P2P_DEVICE address.

Cc: stable@vger.kernel.org # 3.10.y
Reported-by: Hans de Goede &lt;hdegoede@redhat.com&gt;
Reviewed-by: Hante Meuleman &lt;hante.meuleman@broadcom.com&gt;
Reviewed-by: Pieter-Paul Giesberts &lt;pieter-paul.giesberts@broadcom.com&gt;
Reviewed-by: Franky Lin &lt;franky.lin@broadcom.com&gt;
Signed-off-by: Arend van Spriel &lt;arend.vanspriel@broadcom.com&gt;
Signed-off-by: Kalle Valo &lt;kvalo@codeaurora.org&gt;
Signed-off-by: Sasha Levin &lt;alexander.levin@microsoft.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>rtlwifi: rtl_pci: Fix the bug when inactiveps is enabled.</title>
<updated>2018-05-23T01:33:51+00:00</updated>
<author>
<name>Tsang-Shian Lin</name>
<email>thlin@realtek.com</email>
</author>
<published>2017-12-09T17:37:10+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=8d5072e41e941669d535c687ee6662bb9caabdfd'/>
<id>8d5072e41e941669d535c687ee6662bb9caabdfd</id>
<content type='text'>
[ Upstream commit b7573a0a27bfa8270dea9b145448f6884b7cacc1 ]

Reset the driver current tx read/write index to zero when inactiveps
nic out of sync with HW state. Wrong driver tx read/write index will
cause Tx fail.

Signed-off-by: Tsang-Shian Lin &lt;thlin@realtek.com&gt;
Signed-off-by: Ping-Ke Shih &lt;pkshih@realtek.com&gt;
Signed-off-by: Larry Finger &lt;Larry.Finger@lwfinger.net&gt;
Cc: Yan-Hsuan Chuang &lt;yhchuang@realtek.com&gt;
Cc: Birming Chiu &lt;birming@realtek.com&gt;
Cc: Shaofu &lt;shaofu@realtek.com&gt;
Cc: Steven Ting &lt;steventing@realtek.com&gt;
Signed-off-by: Kalle Valo &lt;kvalo@codeaurora.org&gt;
Signed-off-by: Sasha Levin &lt;alexander.levin@microsoft.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit b7573a0a27bfa8270dea9b145448f6884b7cacc1 ]

Reset the driver current tx read/write index to zero when inactiveps
nic out of sync with HW state. Wrong driver tx read/write index will
cause Tx fail.

Signed-off-by: Tsang-Shian Lin &lt;thlin@realtek.com&gt;
Signed-off-by: Ping-Ke Shih &lt;pkshih@realtek.com&gt;
Signed-off-by: Larry Finger &lt;Larry.Finger@lwfinger.net&gt;
Cc: Yan-Hsuan Chuang &lt;yhchuang@realtek.com&gt;
Cc: Birming Chiu &lt;birming@realtek.com&gt;
Cc: Shaofu &lt;shaofu@realtek.com&gt;
Cc: Steven Ting &lt;steventing@realtek.com&gt;
Signed-off-by: Kalle Valo &lt;kvalo@codeaurora.org&gt;
Signed-off-by: Sasha Levin &lt;alexander.levin@microsoft.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>rndis_wlan: add return value validation</title>
<updated>2018-05-23T01:33:50+00:00</updated>
<author>
<name>Pan Bian</name>
<email>bianpan2016@163.com</email>
</author>
<published>2017-04-24T00:40:28+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=58b6fa4c42f1d15559b5adadd698f40b27c4729a'/>
<id>58b6fa4c42f1d15559b5adadd698f40b27c4729a</id>
<content type='text'>
[ Upstream commit 9dc7efd3978aa67ae598129d2a3f240b390ce508 ]

Function create_singlethread_workqueue() will return a NULL pointer if
there is no enough memory, and its return value should be validated
before using. However, in function rndis_wlan_bind(), its return value
is not checked. This may cause NULL dereference bugs. This patch fixes
it.

Signed-off-by: Pan Bian &lt;bianpan2016@163.com&gt;
Signed-off-by: Kalle Valo &lt;kvalo@codeaurora.org&gt;
Signed-off-by: Sasha Levin &lt;alexander.levin@microsoft.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 9dc7efd3978aa67ae598129d2a3f240b390ce508 ]

Function create_singlethread_workqueue() will return a NULL pointer if
there is no enough memory, and its return value should be validated
before using. However, in function rndis_wlan_bind(), its return value
is not checked. This may cause NULL dereference bugs. This patch fixes
it.

Signed-off-by: Pan Bian &lt;bianpan2016@163.com&gt;
Signed-off-by: Kalle Valo &lt;kvalo@codeaurora.org&gt;
Signed-off-by: Sasha Levin &lt;alexander.levin@microsoft.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ath: Fix updating radar flags for coutry code India</title>
<updated>2018-05-23T01:33:49+00:00</updated>
<author>
<name>Mohammed Shafi Shajakhan</name>
<email>mohammed@qti.qualcomm.com</email>
</author>
<published>2017-04-12T17:49:37+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=64be122127f93839867963fb3ab84f7ea7075df2'/>
<id>64be122127f93839867963fb3ab84f7ea7075df2</id>
<content type='text'>
[ Upstream commit c0c345d4cacc6a1f39d4856f37dcf6e34f51a5e4 ]

As per latest regulatory update for India, channel 52, 56, 60, 64
is no longer restricted to DFS. Enabling DFS/no infra flags in driver
results in applying all DFS related restrictions (like doing CAC etc
before this channel moves to 'available state') for these channels
even though the country code is programmed as 'India' in he hardware,
fix this by relaxing the frequency range while applying RADAR flags
only if the country code is programmed to India. If the frequency range
needs to modified based on different country code, ath_is_radar_freq
can be extended/modified dynamically.

Signed-off-by: Mohammed Shafi Shajakhan &lt;mohammed@qti.qualcomm.com&gt;
Signed-off-by: Kalle Valo &lt;kvalo@qca.qualcomm.com&gt;
Signed-off-by: Sasha Levin &lt;alexander.levin@microsoft.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit c0c345d4cacc6a1f39d4856f37dcf6e34f51a5e4 ]

As per latest regulatory update for India, channel 52, 56, 60, 64
is no longer restricted to DFS. Enabling DFS/no infra flags in driver
results in applying all DFS related restrictions (like doing CAC etc
before this channel moves to 'available state') for these channels
even though the country code is programmed as 'India' in he hardware,
fix this by relaxing the frequency range while applying RADAR flags
only if the country code is programmed to India. If the frequency range
needs to modified based on different country code, ath_is_radar_freq
can be extended/modified dynamically.

Signed-off-by: Mohammed Shafi Shajakhan &lt;mohammed@qti.qualcomm.com&gt;
Signed-off-by: Kalle Valo &lt;kvalo@qca.qualcomm.com&gt;
Signed-off-by: Sasha Levin &lt;alexander.levin@microsoft.com&gt;
</pre>
</div>
</content>
</entry>
</feed>
