linux-stable.git/drivers/net/wireless/st, branch v6.0

wifi: mac80211: change QoS settings API to take link into account

2022-07-15T09:43:15+00:00

Take the link into account in the QoS settings (EDCA parameters)
APIs.

Signed-off-by: Johannes Berg

wifi: mac80211: return a beacon for a specific link

2022-06-20T10:57:08+00:00

Pass the link id through to the get_beacon and return
the beacon for a specific link id.

Signed-off-by: Shaul Triebitz 
Signed-off-by: Johannes Berg

wifi: mac80211: split bss_info_changed method

2022-06-20T10:55:09+00:00

Split the bss_info_changed method to vif_cfg_changed and
link_info_changed, with the latter getting a link ID.
Also change the 'changed' parameter to u64 already, we
know we need that.

Signed-off-by: Johannes Berg

wifi: mac80211: move interface config to new struct

2022-06-20T10:55:03+00:00

We'll use bss_conf for per-link configuration later, so
move out all the non-link-specific data out into a new
struct ieee80211_vif_cfg used in the vif.

Some adjustments were done with the following spatch:

    @@
    expression sdata;
    struct ieee80211_vif *vifp;
    identifier var = { assoc, ibss_joined, aid, arp_addr_list, arp_addr_cnt, ssid, ssid_len, s1g, ibss_creator };
    @@
    (
    -sdata->vif.bss_conf.var
    +sdata->vif.cfg.var
    |
    -vifp->bss_conf.var
    +vifp->cfg.var
    )

    @bss_conf@
    struct ieee80211_bss_conf *bss_conf;
    identifier var = { assoc, ibss_joined, aid, arp_addr_list, arp_addr_cnt, ssid, ssid_len, s1g, ibss_creator };
    @@
    -bss_conf->var
    +vif_cfg->var

(though more manual fixups were needed, e.g. replacing
"vif_cfg->" by "vif->cfg." in many files.)

Signed-off-by: Johannes Berg

wifi: cw1200: cleanup the code a bit

2022-05-30T08:29:15+00:00

Delete if NULL check before dev_kfree_skb call.
This change is to cleanup the code a bit.

Signed-off-by: Bernard Zhao 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/20220517014136.410450-1-bernard@vivo.com

mac80211: prepare sta handling for MLO support

2022-04-11T14:42:03+00:00

Currently in mac80211 each STA object is represented
using sta_info datastructure with the associated
STA specific information and drivers access ieee80211_sta
part of it.

With MLO (Multi Link Operation) support being added
in 802.11be standard, though the association is logically
with a single Multi Link capable STA, at the physical level
communication can happen via different advertised
links (uniquely identified by Channel, operating class,
BSSID) and hence the need to handle multiple link
STA parameters within a composite sta_info object
called the MLD STA. The different link STA part of
MLD STA are identified using the link address which can
be same or different as the MLD STA address and unique
link id based on the link vif.

To support extension of such a model, the sta_info
datastructure is modified to hold multiple link STA
objects with link specific params currently within
sta_info moved to this new structure. Similarly this is
done for ieee80211_sta as well which will be accessed
within mac80211 as well as by drivers, hence trivial
driver changes are expected to support this.

For current non MLO supported drivers, only one link STA
is present and link information is accessed via 'deflink'
member.

For MLO drivers, we still need to define the APIs etc. to
get the correct link ID and access the correct part of
the station info.

Currently in mac80211, all link STA info are accessed directly
via deflink. These will be updated to access via link pointers
indexed by link id with MLO support patches, with link id
being 0 for non MLO supported cases.

Except for couple of macro related changes, below spatch takes
care of updating mac80211 and driver code to access to the
link STA info via deflink.

  @ieee80211_sta@
  struct ieee80211_sta *s;
  struct sta_info *si;
  identifier var = {supp_rates, ht_cap, vht_cap, he_cap, he_6ghz_capa, eht_cap, rx_nss, bandwidth, txpwr};
  @@

  (
    s->
  -    var
  +    deflink.var
  |
   si->sta.
  -    var
  +    deflink.var
  )

  @sta_info@
  struct sta_info *si;
  identifier var = {gtk, pcpu_rx_stats, rx_stats, rx_stats_avg, status_stats, tx_stats, cur_max_bandwidth};
  @@

  (
    si->
  -    var
  +    deflink.var
  )

Signed-off-by: Sriram R 
Link: https://lore.kernel.org/r/1649086883-13246-1-git-send-email-quic_srirrama@quicinc.com
[remove MLO-drivers notes from commit message, not clear yet; run spatch]
Signed-off-by: Johannes Berg

Merge tag 'wireless-next-2022-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

2022-03-11T21:00:17+00:00

Johannes Berg says:

====================
brcmfmac
 * add BCM43454/6 support

rtw89
 * add support for 160 MHz channels and 6 GHz band
 * hardware scan support

iwlwifi
 * support UHB TAS enablement via BIOS
 * remove a bunch of W=1 warnings
 * add support for channel switch offload
 * support 32 Rx AMPDU sessions in newer devices
 * add support for a couple of new devices
 * add support for band disablement via BIOS

mt76
 * mt7915 thermal management improvements
 * SAR support for more mt76 drivers
 * mt7986 wmac support on mt7915

ath11k
 * debugfs interface to configure firmware debug log level
 * debugfs interface to test Target Wake Time (TWT)
 * provide 802.11ax High Efficiency (HE) data via radiotap

ath9k
 * use hw_random API instead of directly dumping into random.c

wcn36xx
 * fix wcn3660 to work on 5 GHz band

ath6kl
 * add device ID for WLU5150-D81

cfg80211/mac80211
 * initial EHT (from 802.11be) support
   (EHT rates, 320 MHz, larger block-ack)
 * support disconnect on HW restart

* tag 'wireless-next-2022-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (247 commits)
  mac80211: Add support to trigger sta disconnect on hardware restart
  mac80211: fix potential double free on mesh join
  mac80211: correct legacy rates check in ieee80211_calc_rx_airtime
  nl80211: fix typo of NL80211_IF_TYPE_OCB in documentation
  mac80211: Use GFP_KERNEL instead of GFP_ATOMIC when possible
  mac80211: replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE
  rtw89: 8852c: process logic efuse map
  rtw89: 8852c: process efuse of phycap
  rtw89: support DAV efuse reading operation
  rtw89: 8852c: add chip::dle_mem
  rtw89: add page_regs to handle v1 chips
  rtw89: add chip_info::{h2c,c2h}_reg to support more chips
  rtw89: add hci_func_en_addr to support variant generation
  rtw89: add power_{on/off}_func
  rtw89: read chip version depends on chip ID
  rtw89: pci: use a struct to describe all registers address related to DMA channel
  rtw89: pci: add V1 of PCI channel address
  rtw89: pci: add struct rtw89_pci_info
  rtw89: 8852c: add 8852c empty files
  MAINTAINERS: add devicetree bindings entry for mt76
  ...

====================

Link: https://lore.kernel.org/r/20220311124029.213470-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski

cw1200: use time_is_after_jiffies() instead of open coding it

2022-03-10T16:17:10+00:00

Use the helper function time_is_{before,after}_jiffies() to improve
code readability.

Signed-off-by: Wang Qing 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/1646018060-61275-1-git-send-email-wangqing@vivo.com

Merge tag 'spi-remove-void' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

2022-02-28T18:43:07+00:00

Mark Brown says:

====================
spi: Make remove() return void

This series from Uwe Kleine-König converts the spi remove function to
return void since there is nothing useful that we can do with a failure
and it as more buses are converted it'll enable further work on the
driver core.
====================

Link: https://lore.kernel.org/r/20220228173957.1262628-2-broonie@kernel.org/
Signed-off-by: Jakub Kicinski

spi: make remove callback a void function

2022-02-09T13:00:45+00:00

The value returned by an spi driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)

So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.

Signed-off-by: Uwe Kleine-König 
Acked-by: Marc Kleine-Budde 
Acked-by: Andy Shevchenko 
Reviewed-by: Geert Uytterhoeven 
Acked-by: Jérôme Pouiller 
Acked-by: Miquel Raynal 
Acked-by: Jonathan Cameron 
Acked-by: Claudius Heine 
Acked-by: Stefan Schmidt 
Acked-by: Alexandre Belloni 
Acked-by: Ulf Hansson  # For MMC
Acked-by: Marcus Folkesson 
Acked-by: Łukasz Stelmach 
Acked-by: Lee Jones 
Link: https://lore.kernel.org/r/20220123175201.34839-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown