linux-stable.git/drivers/net/wireless/realtek, branch linux-4.19.y Linux kernel stable tree wifi: rtl8xxxu: Fix the TX power of RTL8192CU, RTL8723AU 2024-06-16T11:23:39+00:00 Bitterblue Smith rtl8821cerfe2@gmail.com 2024-04-15T20:59:05+00:00 e9b77b537a198235a518f71a274348afd1288467 commit 08b5d052d17a89bb8706b2888277d0b682dc1610 upstream. Don't subtract 1 from the power index. This was added in commit 2fc0b8e5a17d ("rtl8xxxu: Add TX power base values for gen1 parts") for unknown reasons. The vendor drivers don't do this. Also correct the calculations of values written to REG_OFDM0_X{C,D}_TX_IQ_IMBALANCE. According to the vendor driver, these are used for TX power training. With these changes rtl8xxxu sets the TX power of RTL8192CU the same as the vendor driver. None of this appears to have any effect on my RTL8192CU device. Cc: stable@vger.kernel.org Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/6ae5945b-644e-45e4-a78f-4c7d9c987910@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 08b5d052d17a89bb8706b2888277d0b682dc1610 upstream.

Don't subtract 1 from the power index. This was added in commit
2fc0b8e5a17d ("rtl8xxxu: Add TX power base values for gen1 parts")
for unknown reasons. The vendor drivers don't do this.

Also correct the calculations of values written to
REG_OFDM0_X{C,D}_TX_IQ_IMBALANCE. According to the vendor driver,
these are used for TX power training.

With these changes rtl8xxxu sets the TX power of RTL8192CU the same
as the vendor driver.

None of this appears to have any effect on my RTL8192CU device.

Cc: stable@vger.kernel.org
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/6ae5945b-644e-45e4-a78f-4c7d9c987910@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
wifi: rtlwifi: rtl8723{be,ae}: using calculate_bit_shift() 2024-02-23T07:12:48+00:00 Su Hui suhui@nfschina.com 2023-12-19T06:57:39+00:00 93aab385375ddd03a83f5b8444c665ee2c2b6d88 [ Upstream commit 5c16618bc06a41ad68fd8499a21d35ef57ca06c2 ] Using calculate_bit_shift() to replace rtl8723_phy_calculate_bit_shift(). And fix an undefined bitwise shift behavior problem. Signed-off-by: Su Hui <suhui@nfschina.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231219065739.1895666-12-suhui@nfschina.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 5c16618bc06a41ad68fd8499a21d35ef57ca06c2 ]

Using calculate_bit_shift() to replace rtl8723_phy_calculate_bit_shift().
And fix an undefined bitwise shift behavior problem.

Signed-off-by: Su Hui <suhui@nfschina.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231219065739.1895666-12-suhui@nfschina.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
wifi: rtl8xxxu: Add additional USB IDs for RTL8192EU devices 2024-02-23T07:12:48+00:00 Zenm Chen zenmchen@gmail.com 2023-12-17T12:30:17+00:00 099b8d44c6a0ab899600f6ece6737ce8b527dbc7 [ Upstream commit 4e87ca403e2008b9e182239e1abbf6876a55eb33 ] Add additional USB IDs found in the vendor driver from https://github.com/Mange/rtl8192eu-linux-driver to support more RTL8192EU devices. Signed-off-by: Zenm Chen <zenmchen@gmail.com> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231217123017.1982-1-zenmchen@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 4e87ca403e2008b9e182239e1abbf6876a55eb33 ]

Add additional USB IDs found in the vendor driver from
https://github.com/Mange/rtl8192eu-linux-driver to support more
RTL8192EU devices.

Signed-off-by: Zenm Chen <zenmchen@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231217123017.1982-1-zenmchen@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
wifi: rtlwifi: Convert LNKCTL change to PCIe cap RMW accessors 2024-01-25T22:33:38+00:00 Ilpo Järvinen ilpo.jarvinen@linux.intel.com 2023-11-24T08:47:17+00:00 a0aa5c8bacad6f5a6f5cd0aeba459b54f4f01c0f commit 5894d0089cbc146063dcc0239a78ede0a8142efb upstream. The rtlwifi driver comes with custom code to write into PCIe Link Control register. RMW access for the Link Control register requires locking that is already provided by the standard PCIe capability accessors. Convert the custom RMW code writing into LNKCTL register to standard RMW capability accessors. The accesses are changed to cover the full LNKCTL register instead of touching just a single byte of the register. Fixes: 0c8173385e54 ("rtl8192ce: Add new driver") Cc: stable@vger.kernel.org Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231124084725.12738-3-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 5894d0089cbc146063dcc0239a78ede0a8142efb upstream.

The rtlwifi driver comes with custom code to write into PCIe Link
Control register. RMW access for the Link Control register requires
locking that is already provided by the standard PCIe capability
accessors.

Convert the custom RMW code writing into LNKCTL register to standard
RMW capability accessors. The accesses are changed to cover the full
LNKCTL register instead of touching just a single byte of the register.

Fixes: 0c8173385e54 ("rtl8192ce: Add new driver")
Cc: stable@vger.kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231124084725.12738-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
wifi: rtlwifi: Remove bogus and dangerous ASPM disable/enable code 2024-01-25T22:33:38+00:00 Ilpo Järvinen ilpo.jarvinen@linux.intel.com 2023-11-24T08:47:16+00:00 fef91b68a7a1ce6fe250c823f9eac0a8a4b86d67 commit b3943b3c2971444364e03224cfc828c5789deada upstream. Ever since introduction in the commit 0c8173385e54 ("rtl8192ce: Add new driver") the rtlwifi code has, according to comments, attempted to disable/enable ASPM of the upstream bridge by writing into its LNKCTL register. However, the code has never been correct because it performs the writes to the device instead of the upstream bridge. Worse yet, the offset where the PCIe capabilities reside is derived from the offset of the upstream bridge. As a result, the write will use an offset on the device that does not relate to the LNKCTL register making the ASPM disable/enable code outright dangerous. Because of those problems, there is no indication that the driver needs disable/enable ASPM on the upstream bridge. As the Capabilities offset is not correctly calculated for the write to target device's LNKCTL register, the code is not disabling/enabling device's ASPM either. Therefore, just remove the upstream bridge related ASPM disable/enable code entirely. The upstream bridge related ASPM code was the only user of the struct mp_adapter members num4bytes, pcibridge_pciehdr_offset, and pcibridge_linkctrlreg so those are removed as well. Note: This change does not remove the code related to changing the device's ASPM on purpose (which is independent of this flawed code related to upstream bridge's ASPM). Suggested-by: Bjorn Helgaas <bhelgaas@kernel.org> Fixes: 0c8173385e54 ("rtl8192ce: Add new driver") Fixes: 886e14b65a8f ("rtlwifi: Eliminate raw reads and writes from PCIe portion") Cc: stable@vger.kernel.org Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231124084725.12738-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b3943b3c2971444364e03224cfc828c5789deada upstream.

Ever since introduction in the commit 0c8173385e54 ("rtl8192ce: Add new
driver") the rtlwifi code has, according to comments, attempted to
disable/enable ASPM of the upstream bridge by writing into its LNKCTL
register. However, the code has never been correct because it performs
the writes to the device instead of the upstream bridge.

Worse yet, the offset where the PCIe capabilities reside is derived
from the offset of the upstream bridge. As a result, the write will use
an offset on the device that does not relate to the LNKCTL register
making the ASPM disable/enable code outright dangerous.

Because of those problems, there is no indication that the driver needs
disable/enable ASPM on the upstream bridge. As the Capabilities offset
is not correctly calculated for the write to target device's LNKCTL
register, the code is not disabling/enabling device's ASPM either.
Therefore, just remove the upstream bridge related ASPM disable/enable
code entirely.

The upstream bridge related ASPM code was the only user of the struct
mp_adapter members num4bytes, pcibridge_pciehdr_offset, and
pcibridge_linkctrlreg so those are removed as well.

Note: This change does not remove the code related to changing the
device's ASPM on purpose (which is independent of this flawed code
related to upstream bridge's ASPM).

Suggested-by: Bjorn Helgaas <bhelgaas@kernel.org>
Fixes: 0c8173385e54 ("rtl8192ce: Add new driver")
Fixes: 886e14b65a8f ("rtlwifi: Eliminate raw reads and writes from PCIe portion")
Cc: stable@vger.kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231124084725.12738-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
wifi: rtlwifi: rtl8192se: using calculate_bit_shift() 2024-01-25T22:33:34+00:00 Su Hui suhui@nfschina.com 2023-12-19T06:57:37+00:00 9e50da7d71796c662bb39dada2d3ca44c2bf2362 [ Upstream commit ac32b9317063b101a8ff3d3e885f76f87a280419 ] Using calculate_bit_shift() to replace _rtl92s_phy_calculate_bit_shift(). And fix the undefined bitwise shift behavior problem. Fixes: d15853163bea ("rtlwifi: rtl8192se: Merge phy routines") Signed-off-by: Su Hui <suhui@nfschina.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231219065739.1895666-10-suhui@nfschina.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit ac32b9317063b101a8ff3d3e885f76f87a280419 ]

Using calculate_bit_shift() to replace _rtl92s_phy_calculate_bit_shift().
And fix the undefined bitwise shift behavior problem.

Fixes: d15853163bea ("rtlwifi: rtl8192se: Merge phy routines")
Signed-off-by: Su Hui <suhui@nfschina.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231219065739.1895666-10-suhui@nfschina.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
wifi: rtlwifi: rtl8192ee: using calculate_bit_shift() 2024-01-25T22:33:34+00:00 Su Hui suhui@nfschina.com 2023-12-19T06:57:36+00:00 6642a375aa95f4344ab1fc7332f2d45c20ea2d63 [ Upstream commit 63526897fc0d086069bcab67c3a112caaec751cb ] Using calculate_bit_shift() to replace _rtl92ee_phy_calculate_bit_shift(). And fix the undefined bitwise shift behavior problem. Fixes: b1a3bfc97cd9 ("rtlwifi: rtl8192ee: Move driver from staging to the regular tree") Signed-off-by: Su Hui <suhui@nfschina.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231219065739.1895666-9-suhui@nfschina.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 63526897fc0d086069bcab67c3a112caaec751cb ]

Using calculate_bit_shift() to replace _rtl92ee_phy_calculate_bit_shift().
And fix the undefined bitwise shift behavior problem.

Fixes: b1a3bfc97cd9 ("rtlwifi: rtl8192ee: Move driver from staging to the regular tree")
Signed-off-by: Su Hui <suhui@nfschina.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231219065739.1895666-9-suhui@nfschina.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
wifi: rtlwifi: rtl8192de: using calculate_bit_shift() 2024-01-25T22:33:34+00:00 Su Hui suhui@nfschina.com 2023-12-19T06:57:35+00:00 9f1500e8c3a50be139e87d71394d5109e46e3dad [ Upstream commit b8b2baad2e652042cf8b6339939ac2f4e6f53de4 ] Using calculate_bit_shift() to replace _rtl92d_phy_calculate_bit_shift(). And fix the undefined bitwise shift behavior problem. Fixes: 7274a8c22980 ("rtlwifi: rtl8192de: Merge phy routines") Signed-off-by: Su Hui <suhui@nfschina.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231219065739.1895666-8-suhui@nfschina.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit b8b2baad2e652042cf8b6339939ac2f4e6f53de4 ]

Using calculate_bit_shift() to replace _rtl92d_phy_calculate_bit_shift().
And fix the undefined bitwise shift behavior problem.

Fixes: 7274a8c22980 ("rtlwifi: rtl8192de: Merge phy routines")
Signed-off-by: Su Hui <suhui@nfschina.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231219065739.1895666-8-suhui@nfschina.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
rtlwifi: rtl8192de: make arrays static const, makes object smaller 2024-01-25T22:33:34+00:00 Colin Ian King colin.king@canonical.com 2021-08-03T14:49:48+00:00 86cd6555b79b22b64bf49a031bc056c4d4c447bd [ Upstream commit b05897ca8c821a16ac03850c4704fe460b3f21a0 ] Don't populate arrays the stack but instead make them static const. Replace array channel_info with channel_all since it contains the same data as channel_all. Makes object code smaller by 961 bytes. Before: text data bss dec hex filename 128147 44250 1024 173421 2a56d ../realtek/rtlwifi/rtl8192de/phy.o After text data bss dec hex filename 127122 44314 1024 172460 2a1ac ../realtek/rtlwifi/rtl8192de/phy.o (gcc version 10.2.0) Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210803144949.79433-2-colin.king@canonical.com Stable-dep-of: b8b2baad2e65 ("wifi: rtlwifi: rtl8192de: using calculate_bit_shift()") Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit b05897ca8c821a16ac03850c4704fe460b3f21a0 ]

Don't populate arrays the stack but instead make them static const. Replace
array channel_info with channel_all since it contains the same data as
channel_all. Makes object code smaller by 961 bytes.

Before:
   text	   data	    bss	    dec	   hex	filename
 128147	  44250	   1024	 173421	 2a56d	../realtek/rtlwifi/rtl8192de/phy.o

After
   text	   data	    bss	    dec	   hex	filename
 127122	  44314	   1024	 172460	 2a1ac	../realtek/rtlwifi/rtl8192de/phy.o

(gcc version 10.2.0)

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210803144949.79433-2-colin.king@canonical.com
Stable-dep-of: b8b2baad2e65 ("wifi: rtlwifi: rtl8192de: using calculate_bit_shift()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
wifi: rtlwifi: rtl8192ce: using calculate_bit_shift() 2024-01-25T22:33:34+00:00 Su Hui suhui@nfschina.com 2023-12-19T06:57:34+00:00 8f79e8a983010ac6e31e2ce6bde6d00e2c9a4e4e [ Upstream commit 3d03e8231031bcc65a48cd88ef9c71b6524ce70b ] Using calculate_bit_shift() to replace _rtl92c_phy_calculate_bit_shift(). And fix the undefined bitwise shift behavior problem. Fixes: 0c8173385e54 ("rtl8192ce: Add new driver") Signed-off-by: Su Hui <suhui@nfschina.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231219065739.1895666-7-suhui@nfschina.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 3d03e8231031bcc65a48cd88ef9c71b6524ce70b ]

Using calculate_bit_shift() to replace _rtl92c_phy_calculate_bit_shift().
And fix the undefined bitwise shift behavior problem.

Fixes: 0c8173385e54 ("rtl8192ce: Add new driver")
Signed-off-by: Su Hui <suhui@nfschina.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231219065739.1895666-7-suhui@nfschina.com
Signed-off-by: Sasha Levin <sashal@kernel.org>