linux-stable.git/drivers/net/wireless/intel, branch v6.1.73

wifi: iwlwifi: yoyo: swap cdb and jacket bits values

2024-01-10T16:10:28+00:00

[ Upstream commit 65008777b9dcd2002414ddb2c2158293a6e2fd6f ]

The bits are wrong, the jacket bit should be 5 and cdb bit 4.
Fix it.

Fixes: 1f171f4f1437 ("iwlwifi: Add support for getting rf id with blank otp")
Signed-off-by: Rotem Saado 
Signed-off-by: Gregory Greenman 
Link: https://lore.kernel.org/r/20231004123422.356d8dacda2f.I349ab888b43a11baa2453a1d6978a6a703e422f0@changeid
Signed-off-by: Johannes Berg 
Signed-off-by: Sasha Levin

wifi: iwlwifi: pcie: don't synchronize IRQs from IRQ

2024-01-10T16:10:21+00:00

[ Upstream commit 400f6ebbc175286576c7f7fddf3c347d09d12310 ]

On older devices (before unified image!) we can end up calling
stop_device from an rfkill interrupt. However, in stop_device
we attempt to synchronize IRQs, which then of course deadlocks.

Avoid this by checking the context, if running from the IRQ
thread then don't synchronize. This wouldn't be correct on a
new device since RSS is supported, but older devices only have
a single interrupt/queue.

Fixes: 37fb29bd1f90 ("wifi: iwlwifi: pcie: synchronize IRQs before NAPI")
Reviewed-by: Miri Korenblit 
Reviewed-by: Emmanuel Grumbach 
Signed-off-by: Johannes Berg 
Signed-off-by: Kalle Valo 
Link: https://msgid.link/20231215111335.59aab00baed7.Iadfe154d6248e7f9dfd69522e5429dbbd72925d7@changeid
Signed-off-by: Sasha Levin

wifi: iwlwifi: pcie: add another missing bh-disable for rxq->lock

2024-01-01T12:38:54+00:00

[ Upstream commit a4754182dc936b97ec7e9f6b08cdf7ed97ef9069 ]

Evidently I had only looked at all the ones in rx.c, and missed this.
Add bh-disable to this use of the rxq->lock as well.

Fixes: 25edc8f259c7 ("iwlwifi: pcie: properly implement NAPI")
Reported-by: Brian Norris 
Signed-off-by: Johannes Berg 
Signed-off-by: Miri Korenblit 
Link: https://msgid.link/20231208183100.e79ad3dae649.I8f19713c4383707f8be7fc20ff5cc1ecf12429bb@changeid
Signed-off-by: Johannes Berg 
Signed-off-by: Sasha Levin

wifi: iwlwifi: Use FW rate for non-data frames

2023-11-28T17:07:03+00:00

[ Upstream commit 499d02790495958506a64f37ceda7e97345a50a8 ]

Currently we are setting the rate in the tx cmd for
mgmt frames (e.g. during connection establishment).
This was problematic when sending mgmt frames in eSR mode,
as we don't know what link this frame will be sent on
(This is decided by the FW), so we don't know what is the
lowest rate.
Fix this by not setting the rate in tx cmd and rely
on FW to choose the right one.
Set rate only for injected frames with fixed rate,
or when no sta is given.
Also set for important frames (EAPOL etc.) the High Priority flag.

Fixes: 055b22e770dd ("iwlwifi: mvm: Set Tx rate and flags when there is not station")
Signed-off-by: Miri Korenblit 
Signed-off-by: Gregory Greenman 
Link: https://lore.kernel.org/r/20230913145231.6c7e59620ee0.I6eaed3ccdd6dd62b9e664facc484081fc5275843@changeid
Signed-off-by: Johannes Berg 
Signed-off-by: Sasha Levin

wifi: iwlwifi: empty overflow queue during flush

2023-11-20T10:51:54+00:00

[ Upstream commit 658939fc68d3241f9a0019e224cd7154438c23f2 ]

If a TX queue has no space for new TX frames, the driver will keep
these frames in the overflow queue, and during reclaim flow it
will retry to send the frames from that queue.
But if the reclaim flow was invoked from TX queue flush, we will also
TX these frames, which is wrong as we don't want to TX anything
after flush.
This might also cause assert 0x125F when removing the queue,
saying that the driver removes a non-empty queue
Fix this by TXing the overflow queue's frames only if we are
not in flush queue flow.

Fixes: a44509805895 ("iwlwifi: move reclaim flows to the queue file")
Signed-off-by: Miri Korenblit 
Signed-off-by: Gregory Greenman 
Link: https://lore.kernel.org/r/20231022173519.caf06c8709d9.Ibf664ccb3f952e836f8fa461ea58fc08e5c46e88@changeid
Signed-off-by: Johannes Berg 
Signed-off-by: Sasha Levin

wifi: iwlwifi: pcie: synchronize IRQs before NAPI

2023-11-20T10:51:54+00:00

[ Upstream commit 37fb29bd1f90f16d1abc95c0e9f0ff8eec9829ad ]

When we want to synchronize the NAPI, which was added in
commit 5af2bb3168db ("wifi: iwlwifi: call napi_synchronize()
before freeing rx/tx queues"), we also need to make sure we
can't actually reschedule the NAPI. Yes, this happens while
interrupts are disabled, but interrupts may still be running
or pending. Also call iwl_pcie_synchronize_irqs() to ensure
we won't reschedule the NAPI.

Fixes: 4cf2f5904d97 ("iwlwifi: queue: avoid memory leak in reset flow")
Signed-off-by: Johannes Berg 
Signed-off-by: Gregory Greenman 
Link: https://lore.kernel.org/r/20231017115047.a0f4104b479a.Id5c50a944f709092aa6256e32d8c63b2b8d8d3ac@changeid
Signed-off-by: Johannes Berg 
Signed-off-by: Sasha Levin

wifi: iwlwifi: call napi_synchronize() before freeing rx/tx queues

2023-11-20T10:51:54+00:00

[ Upstream commit 5af2bb3168db6b0af9988eb25cccf2e3bc4455e2 ]

When rx/tx queues are being freed, on a different CPU there could be
still rx flow running. Call napi_synchronize() to prevent such a race.

Signed-off-by: Gregory Greenman 
Co-developed-by: Benjamin Berg 
Signed-off-by: Benjamin Berg 
Link: https://lore.kernel.org/r/20230416154301.5171ee44dcc1.Iff18718540da412e084e7d8266447d40730600ed@changeid
Signed-off-by: Johannes Berg 
Stable-dep-of: 37fb29bd1f90 ("wifi: iwlwifi: pcie: synchronize IRQs before NAPI")
Signed-off-by: Sasha Levin

wifi: iwlwifi: honor the enable_ini value

2023-11-20T10:51:51+00:00

[ Upstream commit e0c1ca236e28e4263fba76d47a108ed95dcae33e ]

In case the user sets the enable_ini to some preset, we want to honor
the value.

Remove the ops to set the value of the module parameter is runtime, we
don't want to allow to modify the value in runtime since we configure
the firmware once at the beginning on its life.

Fixes: b49c2b252b58 ("iwlwifi: Configure FW debug preset via module param.")
Signed-off-by: Emmanuel Grumbach 
Signed-off-by: Gregory Greenman 
Link: https://lore.kernel.org/r/20230830112059.5734e0f374bb.I6698eda8ed2112378dd47ac5d62866ebe7a94f77@changeid
Signed-off-by: Johannes Berg 
Signed-off-by: Sasha Levin

wifi: iwlwifi: Ensure ack flag is properly cleared.

2023-10-25T10:03:10+00:00

[ Upstream commit e8fbe99e87877f0412655f40d7c45bf8471470ac ]

Debugging indicates that nothing else is clearing the info->flags,
so some frames were flagged as ACKed when they should not be.
Explicitly clear the ack flag to ensure this does not happen.

Signed-off-by: Ben Greear 
Acked-by: Gregory Greenman 
Link: https://lore.kernel.org/r/20230808205605.4105670-1-greearb@candelatech.com
Signed-off-by: Johannes Berg 
Signed-off-by: Sasha Levin

wifi: iwlwifi: mvm: Fix a memory corruption issue

2023-10-10T20:00:39+00:00

[ Upstream commit 8ba438ef3cacc4808a63ed0ce24d4f0942cfe55d ]

A few lines above, space is kzalloc()'ed for:
	sizeof(struct iwl_nvm_data) +
	sizeof(struct ieee80211_channel) +
	sizeof(struct ieee80211_rate)

'mvm->nvm_data' is a 'struct iwl_nvm_data', so it is fine.

At the end of this structure, there is the 'channels' flex array.
Each element is of type 'struct ieee80211_channel'.
So only 1 element is allocated in this array.

When doing:
  mvm->nvm_data->bands[0].channels = mvm->nvm_data->channels;
We point at the first element of the 'channels' flex array.
So this is fine.

However, when doing:
  mvm->nvm_data->bands[0].bitrates =
			(void *)((u8 *)mvm->nvm_data->channels + 1);
because of the "(u8 *)" cast, we add only 1 to the address of the beginning
of the flex array.

It is likely that we want point at the 'struct ieee80211_rate' allocated
just after.

Remove the spurious casting so that the pointer arithmetic works as
expected.

Fixes: 8ca151b568b6 ("iwlwifi: add the MVM driver")
Signed-off-by: Christophe JAILLET 
Acked-by: Gregory Greenman 
Link: https://lore.kernel.org/r/23f0ec986ef1529055f4f93dcb3940a6cf8d9a94.1690143750.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Johannes Berg 
Signed-off-by: Sasha Levin