linux-stable.git/drivers/net/wireless/intel, branch v5.4.90

iwlwifi: mvm: hook up missing RX handlers

2020-12-30T10:51:23+00:00

[ Upstream commit 8a59d39033c35bb484f6bd91891db86ebe07fdc2 ]

The RX handlers for probe response data and channel switch weren't
hooked up properly, fix that.

Fixes: 86e177d80ff7 ("iwlwifi: mvm: add NOA and CSA to a probe response")
Fixes: d3a108a48dc6 ("iwlwifi: mvm: Support CSA countdown offloading")
Signed-off-by: Johannes Berg 
Signed-off-by: Luca Coelho 
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.2d07dcee0d35.I07a61b5d734478db57d9434ff303e4c90bf6c32b@changeid
Signed-off-by: Luca Coelho 
Signed-off-by: Sasha Levin

iwlwifi: pcie: add one missing entry for AX210

2020-12-30T10:50:57+00:00

[ Upstream commit 5febcdef30902fa870128b9789b873199f13aff1 ]

The 0x0024 subsytem device ID was missing from the list, so some AX210
devices were not recognized.  Add it.

Signed-off-by: Luca Coelho 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/iwlwifi.20201202143859.308eab4db42c.I3763196cd3f7bb36f3dcabf02ec4e7c4fe859c0f@changeid
Signed-off-by: Sasha Levin

iwlwifi: mvm: fix kernel panic in case of assert during CSA

2020-12-16T09:56:55+00:00

[ Upstream commit fe56d05ee6c87f6a1a8c7267affd92c9438249cc ]

During CSA, we briefly nullify the phy context, in __iwl_mvm_unassign_vif_chanctx.
In case we have a FW assert right after it, it remains NULL though.
We end up running into endless loop due to mac80211 trying repeatedly to
move us to ASSOC state, and we keep returning -EINVAL. Later down the road
we hit a kernel panic.

Detect and avoid this endless loop.

Signed-off-by: Sara Sharon 
Signed-off-by: Luca Coelho 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/iwlwifi.20201107104557.d64de2c17bff.Iedd0d2afa20a2aacba5259a5cae31cb3a119a4eb@changeid
Signed-off-by: Sasha Levin

iwlwifi: pcie: set LTR to avoid completion timeout

2020-12-16T09:56:55+00:00

[ Upstream commit edb625208d84aef179e3f16590c1c582fc5fdae6 ]

On some platforms, the preset values aren't correct and then we may
get a completion timeout in the firmware. Change the LTR configuration
to avoid that. The firmware will do some more complex reinit of this
later, but for the boot process we use ~250usec.

Signed-off-by: Johannes Berg 
Signed-off-by: Luca Coelho 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/iwlwifi.20201107104557.d83d591c05ba.I42885c9fb500bc08b9a4c07c4ff3d436cc7a3c84@changeid
Signed-off-by: Sasha Levin

iwlwifi: pcie: limit memory read spin time

2020-12-16T09:56:55+00:00

[ Upstream commit 04516706bb99889986ddfa3a769ed50d2dc7ac13 ]

When we read device memory, we lock a spinlock, write the address we
want to read from the device and then spin in a loop reading the data
in 32-bit quantities from another register.

As the description makes clear, this is rather inefficient, incurring
a PCIe bus transaction for every read. In a typical device today, we
want to read 786k SMEM if it crashes, leading to 192k register reads.
Occasionally, we've seen the whole loop take over 20 seconds and then
triggering the soft lockup detector.

Clearly, it is unreasonable to spin here for such extended periods of
time.

To fix this, break the loop down into an outer and an inner loop, and
break out of the inner loop if more than half a second elapsed. To
avoid too much overhead, check for that only every 128 reads, though
there's no particular reason for that number. Then, unlock and relock
to obtain NIC access again, reprogram the start address and continue.

This will keep (interrupt) latencies on the CPU down to a reasonable
time.

Signed-off-by: Johannes Berg 
Signed-off-by: Mordechay Goodstein 
Signed-off-by: Luca Coelho 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/iwlwifi.20201022165103.45878a7e49aa.I3b9b9c5a10002915072312ce75b68ed5b3dc6e14@changeid
Signed-off-by: Sasha Levin

iwlwifi: mvm: write queue_sync_state only for sync

2020-12-02T07:49:50+00:00

[ Upstream commit 97cc16943f23078535fdbce4f6391b948b4ccc08 ]

We use mvm->queue_sync_state to wait for synchronous queue sync
messages, but if an async one happens inbetween we shouldn't
clear mvm->queue_sync_state after sending the async one, that
can run concurrently (at least from the CPU POV) with another
synchronous queue sync.

Signed-off-by: Johannes Berg 
Fixes: 3c514bf831ac ("iwlwifi: mvm: add a loose synchronization of the NSSN across Rx queues")
Signed-off-by: Luca Coelho 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/iwlwifi.20201107104557.51a3148f2c14.I0772171dbaec87433a11513e9586d98b5d920b5f@changeid
Signed-off-by: Sasha Levin

iwlwifi: mvm: split a print to avoid a WARNING in ROC

2020-10-29T08:57:43+00:00

[ Upstream commit 903b3f9badf1d54f77b468b96706dab679b45b14 ]

A print in the remain on channel code was too long and caused
a WARNING, split it.

Signed-off-by: Emmanuel Grumbach 
Fixes: dc28e12f2125 ("iwlwifi: mvm: ROC: Extend the ROC max delay duration & limit ROC duration")
Signed-off-by: Luca Coelho 
Link: https://lore.kernel.org/r/iwlwifi.20200930102759.58d57c0bdc68.Ib06008665e7bf1199c360aa92691d9c74fb84990@changeid
Signed-off-by: Luca Coelho 
Signed-off-by: Sasha Levin

iwlegacy: Check the return value of pcie_capability_read_*()

2020-08-19T06:16:04+00:00

[ Upstream commit 9018fd7f2a73e9b290f48a56b421558fa31e8b75 ]

On failure pcie_capability_read_dword() sets it's last parameter, val
to 0. However, with Patch 14/14, it is possible that val is set to ~0 on
failure. This would introduce a bug because (x & x) == (~0 & x).

This bug can be avoided without changing the function's behaviour if the
return value of pcie_capability_read_dword is checked to confirm success.

Check the return value of pcie_capability_read_dword() to ensure success.

Suggested-by: Bjorn Helgaas 
Signed-off-by: Bolarinwa Olayemi Saheed 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/20200713175529.29715-3-refactormyself@gmail.com
Signed-off-by: Sasha Levin

iwlwifi: mvm: don't call iwl_mvm_free_inactive_queue() under RCU

2020-07-29T08:18:41+00:00

commit fbb1461ad1d6eacca9beb69a2f3ce1b5398d399b upstream.

iwl_mvm_free_inactive_queue() will sleep in synchronize_net() under
some circumstances, so don't call it under RCU. There doesn't appear
to be a need for RCU protection around this particular call.

Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Johannes Berg 
Signed-off-by: Luca Coelho 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/iwlwifi.20200403112332.0f49448c133d.I17fd308bc4a9491859c9b112f4eb5d2c3fc18d7d@changeid
Signed-off-by: Greg Kroah-Hartman

iwlwifi: mvm: fix aux station leak

2020-06-22T07:31:10+00:00

[ Upstream commit f327236df2afc8c3c711e7e070f122c26974f4da ]

When mvm is initialized we alloc aux station with aux queue.
We later free the station memory when driver is stopped, but we
never free the queue's memory, which casues a leak.

Add a proper de-initialization of the station.

Signed-off-by: Sharon 
Signed-off-by: Luca Coelho 
Link: https://lore.kernel.org/r/iwlwifi.20200529092401.0121c5be55e9.Id7516fbb3482131d0c9dfb51ff20b226617ddb49@changeid
Signed-off-by: Sasha Levin