linux-stable.git/drivers/net/wireless/intel, branch v5.4.293 Linux kernel stable tree wifi: iwlwifi: fw: allocate chained SG tables for dump 2025-04-10T12:29:42+00:00 Johannes Berg johannes.berg@intel.com 2025-02-09T12:34:45+00:00 f5302f67865fd6b1febf49e9edd21af2f82fbd3e [ Upstream commit 7774e3920029398ad49dc848b23840593f14d515 ] The firmware dumps can be pretty big, and since we use single pages for each SG table entry, even the table itself may end up being an order-5 allocation. Build chained tables so that we need not allocate a higher-order table here. This could be improved and cleaned up, e.g. by using the SG pool code or simply kvmalloc(), but all of that would require also updating the devcoredump first since that frees it all, so we need to be more careful. SG pool might also run against the CONFIG_ARCH_NO_SG_CHAIN limitation, which is irrelevant here. Also use _devcd_free_sgtable() for the error paths now, much simpler especially since it's in two places now. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250209143303.697c7a465ac9.Iea982df46b5c075bfb77ade36f187d99a70c63db@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 7774e3920029398ad49dc848b23840593f14d515 ]

The firmware dumps can be pretty big, and since we use single
pages for each SG table entry, even the table itself may end
up being an order-5 allocation. Build chained tables so that
we need not allocate a higher-order table here.

This could be improved and cleaned up, e.g. by using the SG
pool code or simply kvmalloc(), but all of that would require
also updating the devcoredump first since that frees it all,
so we need to be more careful. SG pool might also run against
the CONFIG_ARCH_NO_SG_CHAIN limitation, which is irrelevant
here.

Also use _devcd_free_sgtable() for the error paths now, much
simpler especially since it's in two places now.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250209143303.697c7a465ac9.Iea982df46b5c075bfb77ade36f187d99a70c63db@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
wifi: iwlwifi: limit printed string from FW file 2025-03-13T11:43:28+00:00 Johannes Berg johannes.berg@intel.com 2025-02-09T12:34:51+00:00 38f0d398b6d7640d223db69df022c4a232f24774 [ Upstream commit e0dc2c1bef722cbf16ae557690861e5f91208129 ] There's no guarantee here that the file is always with a NUL-termination, so reading the string may read beyond the end of the TLV. If that's the last TLV in the file, it can perhaps even read beyond the end of the file buffer. Fix that by limiting the print format to the size of the buffer we have. Fixes: aee1b6385e29 ("iwlwifi: support fseq tlv and print fseq version") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250209143303.cb5f9d0c2f5d.Idec695d53c6c2234aade306f7647b576c7e3d928@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit e0dc2c1bef722cbf16ae557690861e5f91208129 ]

There's no guarantee here that the file is always with a
NUL-termination, so reading the string may read beyond the
end of the TLV. If that's the last TLV in the file, it can
perhaps even read beyond the end of the file buffer.

Fix that by limiting the print format to the size of the
buffer we have.

Fixes: aee1b6385e29 ("iwlwifi: support fseq tlv and print fseq version")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250209143303.cb5f9d0c2f5d.Idec695d53c6c2234aade306f7647b576c7e3d928@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
wifi: ipw2x00: libipw_rx_any(): fix bad alignment 2024-12-14T18:44:52+00:00 Jiapeng Chong jiapeng.chong@linux.alibaba.com 2024-11-01T06:07:25+00:00 d336bf86802e770c9124dd0398c0a4284d5501d6 [ Upstream commit 4fa4f049dc0d9741b16c96bcbf0108c85368a2b9 ] This patch fixes incorrect code alignment. ./drivers/net/wireless/intel/ipw2x00/libipw_rx.c:871:2-3: code aligned with following code on line 882. ./drivers/net/wireless/intel/ipw2x00/libipw_rx.c:886:2-3: code aligned with following code on line 900. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=11381 Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241101060725.54640-1-jiapeng.chong@linux.alibaba.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 4fa4f049dc0d9741b16c96bcbf0108c85368a2b9 ]

This patch fixes incorrect code alignment.

./drivers/net/wireless/intel/ipw2x00/libipw_rx.c:871:2-3: code aligned with following code on line 882.
./drivers/net/wireless/intel/ipw2x00/libipw_rx.c:886:2-3: code aligned with following code on line 900.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=11381
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241101060725.54640-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
wifi: iwlegacy: Clear stale interrupts before resuming device 2024-11-08T15:20:53+00:00 Ville Syrjälä ville.syrjala@linux.intel.com 2024-10-01T20:07:45+00:00 9d89941e51259c2b0b8e9c10c6f1f74200d7444f commit 07c90acb071b9954e1fecb1e4f4f13d12c544b34 upstream. iwl4965 fails upon resume from hibernation on my laptop. The reason seems to be a stale interrupt which isn't being cleared out before interrupts are enabled. We end up with a race beween the resume trying to bring things back up, and the restart work (queued form the interrupt handler) trying to bring things down. Eventually the whole thing blows up. Fix the problem by clearing out any stale interrupts before interrupts get enabled during resume. Here's a debug log of the indicent: [ 12.042589] ieee80211 phy0: il_isr ISR inta 0x00000080, enabled 0xaa00008b, fh 0x00000000 [ 12.042625] ieee80211 phy0: il4965_irq_tasklet inta 0x00000080, enabled 0x00000000, fh 0x00000000 [ 12.042651] iwl4965 0000:10:00.0: RF_KILL bit toggled to enable radio. [ 12.042653] iwl4965 0000:10:00.0: On demand firmware reload [ 12.042690] ieee80211 phy0: il4965_irq_tasklet End inta 0x00000000, enabled 0xaa00008b, fh 0x00000000, flags 0x00000282 [ 12.052207] ieee80211 phy0: il4965_mac_start enter [ 12.052212] ieee80211 phy0: il_prep_station Add STA to driver ID 31: ff:ff:ff:ff:ff:ff [ 12.052244] ieee80211 phy0: il4965_set_hw_ready hardware ready [ 12.052324] ieee80211 phy0: il_apm_init Init card's basic functions [ 12.052348] ieee80211 phy0: il_apm_init L1 Enabled; Disabling L0S [ 12.055727] ieee80211 phy0: il4965_load_bsm Begin load bsm [ 12.056140] ieee80211 phy0: il4965_verify_bsm Begin verify bsm [ 12.058642] ieee80211 phy0: il4965_verify_bsm BSM bootstrap uCode image OK [ 12.058721] ieee80211 phy0: il4965_load_bsm BSM write complete, poll 1 iterations [ 12.058734] ieee80211 phy0: __il4965_up iwl4965 is coming up [ 12.058737] ieee80211 phy0: il4965_mac_start Start UP work done. [ 12.058757] ieee80211 phy0: __il4965_down iwl4965 is going down [ 12.058761] ieee80211 phy0: il_scan_cancel_timeout Scan cancel timeout [ 12.058762] ieee80211 phy0: il_do_scan_abort Not performing scan to abort [ 12.058765] ieee80211 phy0: il_clear_ucode_stations Clearing ucode stations in driver [ 12.058767] ieee80211 phy0: il_clear_ucode_stations No active stations found to be cleared [ 12.058819] ieee80211 phy0: _il_apm_stop Stop card, put in low power state [ 12.058827] ieee80211 phy0: _il_apm_stop_master stop master [ 12.058864] ieee80211 phy0: il4965_clear_free_frames 0 frames on pre-allocated heap on clear. [ 12.058869] ieee80211 phy0: Hardware restart was requested [ 16.132299] iwl4965 0000:10:00.0: START_ALIVE timeout after 4000ms. [ 16.132303] ------------[ cut here ]------------ [ 16.132304] Hardware became unavailable upon resume. This could be a software issue prior to suspend or a hardware issue. [ 16.132338] WARNING: CPU: 0 PID: 181 at net/mac80211/util.c:1826 ieee80211_reconfig+0x8f/0x14b0 [mac80211] [ 16.132390] Modules linked in: ctr ccm sch_fq_codel xt_tcpudp xt_multiport xt_state iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv4 ip_tables x_tables binfmt_misc joydev mousedev btusb btrtl btintel btbcm bluetooth ecdh_generic ecc iTCO_wdt i2c_dev iwl4965 iwlegacy coretemp snd_hda_codec_analog pcspkr psmouse mac80211 snd_hda_codec_generic libarc4 sdhci_pci cqhci sha256_generic sdhci libsha256 firewire_ohci snd_hda_intel snd_intel_dspcfg mmc_core snd_hda_codec snd_hwdep firewire_core led_class iosf_mbi snd_hda_core uhci_hcd lpc_ich crc_itu_t cfg80211 ehci_pci ehci_hcd snd_pcm usbcore mfd_core rfkill snd_timer snd usb_common soundcore video parport_pc parport intel_agp wmi intel_gtt backlight e1000e agpgart evdev [ 16.132456] CPU: 0 UID: 0 PID: 181 Comm: kworker/u8:6 Not tainted 6.11.0-cl+ #143 [ 16.132460] Hardware name: Hewlett-Packard HP Compaq 6910p/30BE, BIOS 68MCU Ver. F.19 07/06/2010 [ 16.132463] Workqueue: async async_run_entry_fn [ 16.132469] RIP: 0010:ieee80211_reconfig+0x8f/0x14b0 [mac80211] [ 16.132501] Code: da 02 00 00 c6 83 ad 05 00 00 00 48 89 df e8 98 1b fc ff 85 c0 41 89 c7 0f 84 e9 02 00 00 48 c7 c7 a0 e6 48 a0 e8 d1 77 c4 e0 <0f> 0b eb 2d 84 c0 0f 85 8b 01 00 00 c6 87 ad 05 00 00 00 e8 69 1b [ 16.132504] RSP: 0018:ffffc9000029fcf0 EFLAGS: 00010282 [ 16.132507] RAX: 0000000000000000 RBX: ffff8880072008e0 RCX: 0000000000000001 [ 16.132509] RDX: ffffffff81f21a18 RSI: 0000000000000086 RDI: 0000000000000001 [ 16.132510] RBP: ffff8880072003c0 R08: 0000000000000000 R09: 0000000000000003 [ 16.132512] R10: 0000000000000000 R11: ffff88807e5b0000 R12: 0000000000000001 [ 16.132514] R13: 0000000000000000 R14: 0000000000000000 R15: 00000000ffffff92 [ 16.132515] FS: 0000000000000000(0000) GS:ffff88807c200000(0000) knlGS:0000000000000000 [ 16.132517] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 16.132519] CR2: 000055dd43786c08 CR3: 000000000978f000 CR4: 00000000000006f0 [ 16.132521] Call Trace: [ 16.132525] <TASK> [ 16.132526] ? __warn+0x77/0x120 [ 16.132532] ? ieee80211_reconfig+0x8f/0x14b0 [mac80211] [ 16.132564] ? report_bug+0x15c/0x190 [ 16.132568] ? handle_bug+0x36/0x70 [ 16.132571] ? exc_invalid_op+0x13/0x60 [ 16.132573] ? asm_exc_invalid_op+0x16/0x20 [ 16.132579] ? ieee80211_reconfig+0x8f/0x14b0 [mac80211] [ 16.132611] ? snd_hdac_bus_init_cmd_io+0x24/0x200 [snd_hda_core] [ 16.132617] ? pick_eevdf+0x133/0x1c0 [ 16.132622] ? check_preempt_wakeup_fair+0x70/0x90 [ 16.132626] ? wakeup_preempt+0x4a/0x60 [ 16.132628] ? ttwu_do_activate.isra.0+0x5a/0x190 [ 16.132632] wiphy_resume+0x79/0x1a0 [cfg80211] [ 16.132675] ? wiphy_suspend+0x2a0/0x2a0 [cfg80211] [ 16.132697] dpm_run_callback+0x75/0x1b0 [ 16.132703] device_resume+0x97/0x200 [ 16.132707] async_resume+0x14/0x20 [ 16.132711] async_run_entry_fn+0x1b/0xa0 [ 16.132714] process_one_work+0x13d/0x350 [ 16.132718] worker_thread+0x2be/0x3d0 [ 16.132722] ? cancel_delayed_work_sync+0x70/0x70 [ 16.132725] kthread+0xc0/0xf0 [ 16.132729] ? kthread_park+0x80/0x80 [ 16.132732] ret_from_fork+0x28/0x40 [ 16.132735] ? kthread_park+0x80/0x80 [ 16.132738] ret_from_fork_asm+0x11/0x20 [ 16.132741] </TASK> [ 16.132742] ---[ end trace 0000000000000000 ]--- [ 16.132930] ------------[ cut here ]------------ [ 16.132932] WARNING: CPU: 0 PID: 181 at net/mac80211/driver-ops.c:41 drv_stop+0xe7/0xf0 [mac80211] [ 16.132957] Modules linked in: ctr ccm sch_fq_codel xt_tcpudp xt_multiport xt_state iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv4 ip_tables x_tables binfmt_misc joydev mousedev btusb btrtl btintel btbcm bluetooth ecdh_generic ecc iTCO_wdt i2c_dev iwl4965 iwlegacy coretemp snd_hda_codec_analog pcspkr psmouse mac80211 snd_hda_codec_generic libarc4 sdhci_pci cqhci sha256_generic sdhci libsha256 firewire_ohci snd_hda_intel snd_intel_dspcfg mmc_core snd_hda_codec snd_hwdep firewire_core led_class iosf_mbi snd_hda_core uhci_hcd lpc_ich crc_itu_t cfg80211 ehci_pci ehci_hcd snd_pcm usbcore mfd_core rfkill snd_timer snd usb_common soundcore video parport_pc parport intel_agp wmi intel_gtt backlight e1000e agpgart evdev [ 16.133014] CPU: 0 UID: 0 PID: 181 Comm: kworker/u8:6 Tainted: G W 6.11.0-cl+ #143 [ 16.133018] Tainted: [W]=WARN [ 16.133019] Hardware name: Hewlett-Packard HP Compaq 6910p/30BE, BIOS 68MCU Ver. F.19 07/06/2010 [ 16.133021] Workqueue: async async_run_entry_fn [ 16.133025] RIP: 0010:drv_stop+0xe7/0xf0 [mac80211] [ 16.133048] Code: 48 85 c0 74 0e 48 8b 78 08 89 ea 48 89 de e8 e0 87 04 00 65 ff 0d d1 de c4 5f 0f 85 42 ff ff ff e8 be 52 c2 e0 e9 38 ff ff ff <0f> 0b 5b 5d c3 0f 1f 40 00 41 54 49 89 fc 55 53 48 89 f3 2e 2e 2e [ 16.133050] RSP: 0018:ffffc9000029fc50 EFLAGS: 00010246 [ 16.133053] RAX: 0000000000000000 RBX: ffff8880072008e0 RCX: ffff88800377f6c0 [ 16.133054] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff8880072008e0 [ 16.133056] RBP: 0000000000000000 R08: ffffffff81f238d8 R09: 0000000000000000 [ 16.133058] R10: ffff8880080520f0 R11: 0000000000000000 R12: ffff888008051c60 [ 16.133060] R13: ffff8880072008e0 R14: 0000000000000000 R15: ffff8880072011d8 [ 16.133061] FS: 0000000000000000(0000) GS:ffff88807c200000(0000) knlGS:0000000000000000 [ 16.133063] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 16.133065] CR2: 000055dd43786c08 CR3: 000000000978f000 CR4: 00000000000006f0 [ 16.133067] Call Trace: [ 16.133069] <TASK> [ 16.133070] ? __warn+0x77/0x120 [ 16.133075] ? drv_stop+0xe7/0xf0 [mac80211] [ 16.133098] ? report_bug+0x15c/0x190 [ 16.133100] ? handle_bug+0x36/0x70 [ 16.133103] ? exc_invalid_op+0x13/0x60 [ 16.133105] ? asm_exc_invalid_op+0x16/0x20 [ 16.133109] ? drv_stop+0xe7/0xf0 [mac80211] [ 16.133132] ieee80211_do_stop+0x55a/0x810 [mac80211] [ 16.133161] ? fq_codel_reset+0xa5/0xc0 [sch_fq_codel] [ 16.133164] ieee80211_stop+0x4f/0x180 [mac80211] [ 16.133192] __dev_close_many+0xa2/0x120 [ 16.133195] dev_close_many+0x90/0x150 [ 16.133198] dev_close+0x5d/0x80 [ 16.133200] cfg80211_shutdown_all_interfaces+0x40/0xe0 [cfg80211] [ 16.133223] wiphy_resume+0xb2/0x1a0 [cfg80211] [ 16.133247] ? wiphy_suspend+0x2a0/0x2a0 [cfg80211] [ 16.133269] dpm_run_callback+0x75/0x1b0 [ 16.133273] device_resume+0x97/0x200 [ 16.133277] async_resume+0x14/0x20 [ 16.133280] async_run_entry_fn+0x1b/0xa0 [ 16.133283] process_one_work+0x13d/0x350 [ 16.133287] worker_thread+0x2be/0x3d0 [ 16.133290] ? cancel_delayed_work_sync+0x70/0x70 [ 16.133294] kthread+0xc0/0xf0 [ 16.133296] ? kthread_park+0x80/0x80 [ 16.133299] ret_from_fork+0x28/0x40 [ 16.133302] ? kthread_park+0x80/0x80 [ 16.133304] ret_from_fork_asm+0x11/0x20 [ 16.133307] </TASK> [ 16.133308] ---[ end trace 0000000000000000 ]--- [ 16.133335] ieee80211 phy0: PM: dpm_run_callback(): wiphy_resume [cfg80211] returns -110 [ 16.133360] ieee80211 phy0: PM: failed to restore async: error -110 Cc: stable@vger.kernel.org Cc: Stanislaw Gruszka <stf_xl@wp.pl> Cc: Kalle Valo <kvalo@kernel.org> Cc: linux-wireless@vger.kernel.org Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241001200745.8276-1-ville.syrjala@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 07c90acb071b9954e1fecb1e4f4f13d12c544b34 upstream.

iwl4965 fails upon resume from hibernation on my laptop. The reason
seems to be a stale interrupt which isn't being cleared out before
interrupts are enabled. We end up with a race beween the resume
trying to bring things back up, and the restart work (queued form
the interrupt handler) trying to bring things down. Eventually
the whole thing blows up.

Fix the problem by clearing out any stale interrupts before
interrupts get enabled during resume.

Here's a debug log of the indicent:
[   12.042589] ieee80211 phy0: il_isr ISR inta 0x00000080, enabled 0xaa00008b, fh 0x00000000
[   12.042625] ieee80211 phy0: il4965_irq_tasklet inta 0x00000080, enabled 0x00000000, fh 0x00000000
[   12.042651] iwl4965 0000:10:00.0: RF_KILL bit toggled to enable radio.
[   12.042653] iwl4965 0000:10:00.0: On demand firmware reload
[   12.042690] ieee80211 phy0: il4965_irq_tasklet End inta 0x00000000, enabled 0xaa00008b, fh 0x00000000, flags 0x00000282
[   12.052207] ieee80211 phy0: il4965_mac_start enter
[   12.052212] ieee80211 phy0: il_prep_station Add STA to driver ID 31: ff:ff:ff:ff:ff:ff
[   12.052244] ieee80211 phy0: il4965_set_hw_ready hardware  ready
[   12.052324] ieee80211 phy0: il_apm_init Init card's basic functions
[   12.052348] ieee80211 phy0: il_apm_init L1 Enabled; Disabling L0S
[   12.055727] ieee80211 phy0: il4965_load_bsm Begin load bsm
[   12.056140] ieee80211 phy0: il4965_verify_bsm Begin verify bsm
[   12.058642] ieee80211 phy0: il4965_verify_bsm BSM bootstrap uCode image OK
[   12.058721] ieee80211 phy0: il4965_load_bsm BSM write complete, poll 1 iterations
[   12.058734] ieee80211 phy0: __il4965_up iwl4965 is coming up
[   12.058737] ieee80211 phy0: il4965_mac_start Start UP work done.
[   12.058757] ieee80211 phy0: __il4965_down iwl4965 is going down
[   12.058761] ieee80211 phy0: il_scan_cancel_timeout Scan cancel timeout
[   12.058762] ieee80211 phy0: il_do_scan_abort Not performing scan to abort
[   12.058765] ieee80211 phy0: il_clear_ucode_stations Clearing ucode stations in driver
[   12.058767] ieee80211 phy0: il_clear_ucode_stations No active stations found to be cleared
[   12.058819] ieee80211 phy0: _il_apm_stop Stop card, put in low power state
[   12.058827] ieee80211 phy0: _il_apm_stop_master stop master
[   12.058864] ieee80211 phy0: il4965_clear_free_frames 0 frames on pre-allocated heap on clear.
[   12.058869] ieee80211 phy0: Hardware restart was requested
[   16.132299] iwl4965 0000:10:00.0: START_ALIVE timeout after 4000ms.
[   16.132303] ------------[ cut here ]------------
[   16.132304] Hardware became unavailable upon resume. This could be a software issue prior to suspend or a hardware issue.
[   16.132338] WARNING: CPU: 0 PID: 181 at net/mac80211/util.c:1826 ieee80211_reconfig+0x8f/0x14b0 [mac80211]
[   16.132390] Modules linked in: ctr ccm sch_fq_codel xt_tcpudp xt_multiport xt_state iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv4 ip_tables x_tables binfmt_misc joydev mousedev btusb btrtl btintel btbcm bluetooth ecdh_generic ecc iTCO_wdt i2c_dev iwl4965 iwlegacy coretemp snd_hda_codec_analog pcspkr psmouse mac80211 snd_hda_codec_generic libarc4 sdhci_pci cqhci sha256_generic sdhci libsha256 firewire_ohci snd_hda_intel snd_intel_dspcfg mmc_core snd_hda_codec snd_hwdep firewire_core led_class iosf_mbi snd_hda_core uhci_hcd lpc_ich crc_itu_t cfg80211 ehci_pci ehci_hcd snd_pcm usbcore mfd_core rfkill snd_timer snd usb_common soundcore video parport_pc parport intel_agp wmi intel_gtt backlight e1000e agpgart evdev
[   16.132456] CPU: 0 UID: 0 PID: 181 Comm: kworker/u8:6 Not tainted 6.11.0-cl+ #143
[   16.132460] Hardware name: Hewlett-Packard HP Compaq 6910p/30BE, BIOS 68MCU Ver. F.19 07/06/2010
[   16.132463] Workqueue: async async_run_entry_fn
[   16.132469] RIP: 0010:ieee80211_reconfig+0x8f/0x14b0 [mac80211]
[   16.132501] Code: da 02 00 00 c6 83 ad 05 00 00 00 48 89 df e8 98 1b fc ff 85 c0 41 89 c7 0f 84 e9 02 00 00 48 c7 c7 a0 e6 48 a0 e8 d1 77 c4 e0 <0f> 0b eb 2d 84 c0 0f 85 8b 01 00 00 c6 87 ad 05 00 00 00 e8 69 1b
[   16.132504] RSP: 0018:ffffc9000029fcf0 EFLAGS: 00010282
[   16.132507] RAX: 0000000000000000 RBX: ffff8880072008e0 RCX: 0000000000000001
[   16.132509] RDX: ffffffff81f21a18 RSI: 0000000000000086 RDI: 0000000000000001
[   16.132510] RBP: ffff8880072003c0 R08: 0000000000000000 R09: 0000000000000003
[   16.132512] R10: 0000000000000000 R11: ffff88807e5b0000 R12: 0000000000000001
[   16.132514] R13: 0000000000000000 R14: 0000000000000000 R15: 00000000ffffff92
[   16.132515] FS:  0000000000000000(0000) GS:ffff88807c200000(0000) knlGS:0000000000000000
[   16.132517] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   16.132519] CR2: 000055dd43786c08 CR3: 000000000978f000 CR4: 00000000000006f0
[   16.132521] Call Trace:
[   16.132525]  <TASK>
[   16.132526]  ? __warn+0x77/0x120
[   16.132532]  ? ieee80211_reconfig+0x8f/0x14b0 [mac80211]
[   16.132564]  ? report_bug+0x15c/0x190
[   16.132568]  ? handle_bug+0x36/0x70
[   16.132571]  ? exc_invalid_op+0x13/0x60
[   16.132573]  ? asm_exc_invalid_op+0x16/0x20
[   16.132579]  ? ieee80211_reconfig+0x8f/0x14b0 [mac80211]
[   16.132611]  ? snd_hdac_bus_init_cmd_io+0x24/0x200 [snd_hda_core]
[   16.132617]  ? pick_eevdf+0x133/0x1c0
[   16.132622]  ? check_preempt_wakeup_fair+0x70/0x90
[   16.132626]  ? wakeup_preempt+0x4a/0x60
[   16.132628]  ? ttwu_do_activate.isra.0+0x5a/0x190
[   16.132632]  wiphy_resume+0x79/0x1a0 [cfg80211]
[   16.132675]  ? wiphy_suspend+0x2a0/0x2a0 [cfg80211]
[   16.132697]  dpm_run_callback+0x75/0x1b0
[   16.132703]  device_resume+0x97/0x200
[   16.132707]  async_resume+0x14/0x20
[   16.132711]  async_run_entry_fn+0x1b/0xa0
[   16.132714]  process_one_work+0x13d/0x350
[   16.132718]  worker_thread+0x2be/0x3d0
[   16.132722]  ? cancel_delayed_work_sync+0x70/0x70
[   16.132725]  kthread+0xc0/0xf0
[   16.132729]  ? kthread_park+0x80/0x80
[   16.132732]  ret_from_fork+0x28/0x40
[   16.132735]  ? kthread_park+0x80/0x80
[   16.132738]  ret_from_fork_asm+0x11/0x20
[   16.132741]  </TASK>
[   16.132742] ---[ end trace 0000000000000000 ]---
[   16.132930] ------------[ cut here ]------------
[   16.132932] WARNING: CPU: 0 PID: 181 at net/mac80211/driver-ops.c:41 drv_stop+0xe7/0xf0 [mac80211]
[   16.132957] Modules linked in: ctr ccm sch_fq_codel xt_tcpudp xt_multiport xt_state iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv4 ip_tables x_tables binfmt_misc joydev mousedev btusb btrtl btintel btbcm bluetooth ecdh_generic ecc iTCO_wdt i2c_dev iwl4965 iwlegacy coretemp snd_hda_codec_analog pcspkr psmouse mac80211 snd_hda_codec_generic libarc4 sdhci_pci cqhci sha256_generic sdhci libsha256 firewire_ohci snd_hda_intel snd_intel_dspcfg mmc_core snd_hda_codec snd_hwdep firewire_core led_class iosf_mbi snd_hda_core uhci_hcd lpc_ich crc_itu_t cfg80211 ehci_pci ehci_hcd snd_pcm usbcore mfd_core rfkill snd_timer snd usb_common soundcore video parport_pc parport intel_agp wmi intel_gtt backlight e1000e agpgart evdev
[   16.133014] CPU: 0 UID: 0 PID: 181 Comm: kworker/u8:6 Tainted: G        W          6.11.0-cl+ #143
[   16.133018] Tainted: [W]=WARN
[   16.133019] Hardware name: Hewlett-Packard HP Compaq 6910p/30BE, BIOS 68MCU Ver. F.19 07/06/2010
[   16.133021] Workqueue: async async_run_entry_fn
[   16.133025] RIP: 0010:drv_stop+0xe7/0xf0 [mac80211]
[   16.133048] Code: 48 85 c0 74 0e 48 8b 78 08 89 ea 48 89 de e8 e0 87 04 00 65 ff 0d d1 de c4 5f 0f 85 42 ff ff ff e8 be 52 c2 e0 e9 38 ff ff ff <0f> 0b 5b 5d c3 0f 1f 40 00 41 54 49 89 fc 55 53 48 89 f3 2e 2e 2e
[   16.133050] RSP: 0018:ffffc9000029fc50 EFLAGS: 00010246
[   16.133053] RAX: 0000000000000000 RBX: ffff8880072008e0 RCX: ffff88800377f6c0
[   16.133054] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff8880072008e0
[   16.133056] RBP: 0000000000000000 R08: ffffffff81f238d8 R09: 0000000000000000
[   16.133058] R10: ffff8880080520f0 R11: 0000000000000000 R12: ffff888008051c60
[   16.133060] R13: ffff8880072008e0 R14: 0000000000000000 R15: ffff8880072011d8
[   16.133061] FS:  0000000000000000(0000) GS:ffff88807c200000(0000) knlGS:0000000000000000
[   16.133063] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   16.133065] CR2: 000055dd43786c08 CR3: 000000000978f000 CR4: 00000000000006f0
[   16.133067] Call Trace:
[   16.133069]  <TASK>
[   16.133070]  ? __warn+0x77/0x120
[   16.133075]  ? drv_stop+0xe7/0xf0 [mac80211]
[   16.133098]  ? report_bug+0x15c/0x190
[   16.133100]  ? handle_bug+0x36/0x70
[   16.133103]  ? exc_invalid_op+0x13/0x60
[   16.133105]  ? asm_exc_invalid_op+0x16/0x20
[   16.133109]  ? drv_stop+0xe7/0xf0 [mac80211]
[   16.133132]  ieee80211_do_stop+0x55a/0x810 [mac80211]
[   16.133161]  ? fq_codel_reset+0xa5/0xc0 [sch_fq_codel]
[   16.133164]  ieee80211_stop+0x4f/0x180 [mac80211]
[   16.133192]  __dev_close_many+0xa2/0x120
[   16.133195]  dev_close_many+0x90/0x150
[   16.133198]  dev_close+0x5d/0x80
[   16.133200]  cfg80211_shutdown_all_interfaces+0x40/0xe0 [cfg80211]
[   16.133223]  wiphy_resume+0xb2/0x1a0 [cfg80211]
[   16.133247]  ? wiphy_suspend+0x2a0/0x2a0 [cfg80211]
[   16.133269]  dpm_run_callback+0x75/0x1b0
[   16.133273]  device_resume+0x97/0x200
[   16.133277]  async_resume+0x14/0x20
[   16.133280]  async_run_entry_fn+0x1b/0xa0
[   16.133283]  process_one_work+0x13d/0x350
[   16.133287]  worker_thread+0x2be/0x3d0
[   16.133290]  ? cancel_delayed_work_sync+0x70/0x70
[   16.133294]  kthread+0xc0/0xf0
[   16.133296]  ? kthread_park+0x80/0x80
[   16.133299]  ret_from_fork+0x28/0x40
[   16.133302]  ? kthread_park+0x80/0x80
[   16.133304]  ret_from_fork_asm+0x11/0x20
[   16.133307]  </TASK>
[   16.133308] ---[ end trace 0000000000000000 ]---
[   16.133335] ieee80211 phy0: PM: dpm_run_callback(): wiphy_resume [cfg80211] returns -110
[   16.133360] ieee80211 phy0: PM: failed to restore async: error -110

Cc: stable@vger.kernel.org
Cc: Stanislaw Gruszka <stf_xl@wp.pl>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: linux-wireless@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241001200745.8276-1-ville.syrjala@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
wifi: iwlwifi: mvm: Fix response handling in iwl_mvm_send_recovery_cmd() 2024-11-08T15:20:52+00:00 Daniel Gabay daniel.gabay@intel.com 2024-10-10T11:05:05+00:00 9c98ee7ea463a838235e7a0e35851b38476364f2 [ Upstream commit 07a6e3b78a65f4b2796a8d0d4adb1a15a81edead ] 1. The size of the response packet is not validated. 2. The response buffer is not freed. Resolve these issues by switching to iwl_mvm_send_cmd_status(), which handles both size validation and frees the buffer. Fixes: f130bb75d881 ("iwlwifi: add FW recovery flow") Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241010140328.76c73185951e.Id3b6ca82ced2081f5ee4f33c997491d0ebda83f7@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 07a6e3b78a65f4b2796a8d0d4adb1a15a81edead ]

1. The size of the response packet is not validated.
2. The response buffer is not freed.

Resolve these issues by switching to iwl_mvm_send_cmd_status(),
which handles both size validation and frees the buffer.

Fixes: f130bb75d881 ("iwlwifi: add FW recovery flow")
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241010140328.76c73185951e.Id3b6ca82ced2081f5ee4f33c997491d0ebda83f7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
wifi: iwlwifi: mvm: disconnect station vifs if recovery failed 2024-11-08T15:20:52+00:00 Emmanuel Grumbach emmanuel.grumbach@intel.com 2024-01-28T06:53:56+00:00 8b30a66a94ea1b1c0c052996567d1838f3dc8888 [ Upstream commit e50a88e5cb8792cc416866496288c5f4d1eb4b1f ] This will allow to reconnect immediately instead of leaving the connection in a limbo state. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240128084842.e90531cd3a36.Iebdc9483983c0d8497f9dcf9d79ec37332a5fdcc@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Stable-dep-of: 07a6e3b78a65 ("wifi: iwlwifi: mvm: Fix response handling in iwl_mvm_send_recovery_cmd()") Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit e50a88e5cb8792cc416866496288c5f4d1eb4b1f ]

This will allow to reconnect immediately instead of leaving the
connection in a limbo state.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240128084842.e90531cd3a36.Iebdc9483983c0d8497f9dcf9d79ec37332a5fdcc@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Stable-dep-of: 07a6e3b78a65 ("wifi: iwlwifi: mvm: Fix response handling in iwl_mvm_send_recovery_cmd()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
wifi: iwlwifi: mvm: don't wait for tx queues if firmware is dead 2024-11-08T15:20:25+00:00 Emmanuel Grumbach emmanuel.grumbach@intel.com 2024-08-25T16:17:04+00:00 16c1e5d5228f26f120e12e6ca55c59c3a5e6dece [ Upstream commit 3a84454f5204718ca5b4ad2c1f0bf2031e2403d1 ] There is a WARNING in iwl_trans_wait_tx_queues_empty() (that was recently converted from just a message), that can be hit if we wait for TX queues to become empty after firmware died. Clearly, we can't expect anything from the firmware after it's declared dead. Don't call iwl_trans_wait_tx_queues_empty() in this case. While it could be a good idea to stop the flow earlier, the flush functions do some maintenance work that is not related to the firmware, so keep that part of the code running even when the firmware is not running. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240825191257.a7cbd794cee9.I44a739fbd4ffcc46b83844dd1c7b2eb0c7b270f6@changeid [edit commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 3a84454f5204718ca5b4ad2c1f0bf2031e2403d1 ]

There is a WARNING in iwl_trans_wait_tx_queues_empty() (that was
recently converted from just a message), that can be hit if we
wait for TX queues to become empty after firmware died. Clearly,
we can't expect anything from the firmware after it's declared dead.

Don't call iwl_trans_wait_tx_queues_empty() in this case. While it could
be a good idea to stop the flow earlier, the flush functions do some
maintenance work that is not related to the firmware, so keep that part
of the code running even when the firmware is not running.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240825191257.a7cbd794cee9.I44a739fbd4ffcc46b83844dd1c7b2eb0c7b270f6@changeid
[edit commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
wifi: iwlwifi: mvm: fix iwl_mvm_max_scan_ie_fw_cmd_room() 2024-11-08T15:20:25+00:00 Daniel Gabay daniel.gabay@intel.com 2024-08-25T16:17:06+00:00 5fa62c3fffa7731ee92a2167b7360d8274777d4d [ Upstream commit 916a5d9c5354c426220a0a6533a5e8ea1287d6ea ] Driver creates also the WFA TPC element, consider that in the calculation. Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240825191257.e710ce446b7f.I2715c6742e9c3d160e2ba41bc4b35de370d2ce34@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 916a5d9c5354c426220a0a6533a5e8ea1287d6ea ]

Driver creates also the WFA TPC element, consider that in the
calculation.

Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240825191257.e710ce446b7f.I2715c6742e9c3d160e2ba41bc4b35de370d2ce34@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
wifi: iwlwifi: abort scan when rfkill on but device enabled 2024-09-04T11:14:54+00:00 Miri Korenblit miriam.rachel.korenblit@intel.com 2023-10-04T09:36:28+00:00 7b31922f2a3b5958c844067c66f61f31d9a19ac0 [ Upstream commit 3c6a0b1f0add72e7f522bc9145222b86d0a7712a ] In RFKILL we first set the RFKILL bit, then we abort scan (if one exists) by waiting for the notification from FW and notifying mac80211. And then we stop the device. But in case we have a scan ongoing in the period of time between rfkill on and before the device is stopped - we will not wait for the FW notification because of the iwl_mvm_is_radio_killed() condition, and then the scan_status and uid_status are misconfigured, (scan_status is cleared but uid_status not) and when the notification suddenly arrives (before stopping the device) we will get into the assert about scan_status and uid_status mismatch. Fix this by waiting for FW notif when rfkill is on but the device isn't disabled yet. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231004123422.c43b69aa2c77.Icc7b5efb47974d6f499156ff7510b786e177993b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 3c6a0b1f0add72e7f522bc9145222b86d0a7712a ]

In RFKILL we first set the RFKILL bit, then we abort scan
(if one exists) by waiting for the notification from FW
and notifying mac80211. And then we stop the device.
But in case we have a scan ongoing in the period of time between
rfkill on and before the device is stopped - we will not wait for the
FW notification because of the iwl_mvm_is_radio_killed() condition,
and then the scan_status and uid_status are misconfigured,
(scan_status is cleared but uid_status not)
and when the notification suddenly arrives (before stopping the device)
we will get into the assert about scan_status and uid_status mismatch.
Fix this by waiting for FW notif when rfkill is on but the device isn't
disabled yet.

Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231004123422.c43b69aa2c77.Icc7b5efb47974d6f499156ff7510b786e177993b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
wifi: iwlwifi: mvm: don't read past the mfuart notifcation 2024-07-05T07:08:11+00:00 Emmanuel Grumbach emmanuel.grumbach@intel.com 2024-05-13T10:27:14+00:00 6532f18e66b384b8d4b7e5c9caca042faaa9e8de [ Upstream commit 4bb95f4535489ed830cf9b34b0a891e384d1aee4 ] In case the firmware sends a notification that claims it has more data than it has, we will read past that was allocated for the notification. Remove the print of the buffer, we won't see it by default. If needed, we can see the content with tracing. This was reported by KFENCE. Fixes: bdccdb854f2f ("iwlwifi: mvm: support MFUART dump in case of MFUART assert") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240513132416.ba82a01a559e.Ia91dd20f5e1ca1ad380b95e68aebf2794f553d9b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 4bb95f4535489ed830cf9b34b0a891e384d1aee4 ]

In case the firmware sends a notification that claims it has more data
than it has, we will read past that was allocated for the notification.
Remove the print of the buffer, we won't see it by default. If needed,
we can see the content with tracing.

This was reported by KFENCE.

Fixes: bdccdb854f2f ("iwlwifi: mvm: support MFUART dump in case of MFUART assert")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240513132416.ba82a01a559e.Ia91dd20f5e1ca1ad380b95e68aebf2794f553d9b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>