linux-stable.git/drivers/net/wireless/intel, branch v5.4.161

iwlwifi: mvm: disable RX-diversity in powersave

2021-11-17T08:48:32+00:00

[ Upstream commit e5322b9ab5f63536c41301150b7ce64605ce52cc ]

Just like we have default SMPS mode as dynamic in powersave,
we should not enable RX-diversity in powersave, to reduce
power consumption when connected to a non-MIMO AP.

Signed-off-by: Johannes Berg 
Signed-off-by: Luca Coelho 
Link: https://lore.kernel.org/r/iwlwifi.20211017113927.fc896bc5cdaa.I1d11da71b8a5cbe921a37058d5f578f1b14a2023@changeid
Signed-off-by: Luca Coelho 
Signed-off-by: Sasha Levin

iwlwifi: mvm: fix access to BSS elements

2021-09-22T10:26:36+00:00

[ Upstream commit 6c608cd6962ebdf84fd3de6d42f88ed64d2f4e1b ]

BSS elements are protected using RCU, so we need to use
RCU properly to access them, fix that.

Signed-off-by: Johannes Berg 
Signed-off-by: Luca Coelho 
Link: https://lore.kernel.org/r/iwlwifi.20210805130823.fd8b5791ab44.Iba26800a6301078d3782fb249c476dd8ac2bf3c6@changeid
Signed-off-by: Luca Coelho 
Signed-off-by: Sasha Levin

iwlwifi: mvm: avoid static queue number aliasing

2021-09-22T10:26:36+00:00

[ Upstream commit c6ce1c74ef2923b8ffd85f7f8b486f804f343b39 ]

When TVQM is enabled (iwl_mvm_has_new_tx_api() is true), then
queue numbers are just sequentially assigned 0, 1, 2, ...
Prior to TVQM, in DQA, there were some statically allocated
queue numbers:
* IWL_MVM_DQA_AUX_QUEUE == 1,
* both IWL_MVM_DQA_INJECT_MONITOR_QUEUE and
IWL_MVM_DQA_P2P_DEVICE_QUEUE == 2, and
* IWL_MVM_DQA_AP_PROBE_RESP_QUEUE == 9.

Now, these values are assigned to the members mvm->aux_queue,
mvm->snif_queue, mvm->probe_queue and mvm->p2p_dev_queue by
default. Normally, this doesn't really matter, and if TVQM is
in fact available we override them to the real values after
allocating a queue for use there.

However, this allocation doesn't always happen. For example,
for mvm->p2p_dev_queue (== 2) it only happens when the P2P
Device interface is started, if any. If it's not started, the
value in mvm->p2p_dev_queue remains 2. This wouldn't really
matter all that much if it weren't for iwl_mvm_is_static_queue()
which checks a queue number against one of those four static
numbers.

Now, if no P2P Device or monitor interface is added then queue
2 may be dynamically allocated, yet alias mvm->p2p_dev_queue or
mvm->snif_queue, and thus iwl_mvm_is_static_queue() erroneously
returns true for it. If it then gets full, all interface queues
are stopped, instead of just backpressuring against the one TXQ
that's really the only affected one.

This clearly can lead to issues, as everything is stopped even
if just a single TXQ filled its corresponding HW queue, if it
happens to have an appropriate number (2 or 9, AUX is always
reassigned.) Due to a mac80211 bug, this also led to a situation
in which the queues remained stopped across a deauthentication
and then attempts to connect to a new AP started failing, but
that's fixed separately.

Fix all of this by simply initializing the queue numbers to
the invalid value until they're used, if TVQM is enabled, and
also setting them back to that value when the queues are later
freed again.

Signed-off-by: Johannes Berg
Signed-off-by: Luca Coelho
Link: https://lore.kernel.org/r/iwlwifi.20210802172232.2e47e623f9e2.I9b0830dafbb68ef35b7b8f0f46160abec02ac7d0@changeid
Signed-off-by: Luca Coelho
Signed-off-by: Sasha Levin

iwlwifi: mvm: fix a memory leak in iwl_mvm_mac_ctxt_beacon_changed

2021-09-22T10:26:36+00:00

[ Upstream commit 0f5d44ac6e55551798dd3da0ff847c8df5990822 ]

If beacon_inject_active is true, we will return without freeing
beacon.  Fid that by freeing it before returning.

Signed-off-by: Zhang Qilong 
[reworded the commit message]
Signed-off-by: Luca Coelho 
Link: https://lore.kernel.org/r/iwlwifi.20210802172232.d16206ca60fc.I9984a9b442c84814c307cee3213044e24d26f38a@changeid
Signed-off-by: Luca Coelho 
Signed-off-by: Sasha Levin

iwlwifi: pcie: fix context info freeing

2021-07-19T06:53:12+00:00

[ Upstream commit 26d18c75a7496c4c52b0b6789e713dc76ebfbc87 ]

After firmware alive, iwl_trans_pcie_gen2_fw_alive() is called
to free the context info. However, on gen3 that will then free
the context info with the wrong size.

Since we free this allocation later, let it stick around until
the device is stopped for now, freeing some of it earlier is a
separate change.

Signed-off-by: Johannes Berg 
Signed-off-by: Luca Coelho 
Link: https://lore.kernel.org/r/iwlwifi.20210618105614.afb63fb8cbc1.If4968db8e09f4ce2a1d27a6d750bca3d132d7d70@changeid
Signed-off-by: Luca Coelho 
Signed-off-by: Sasha Levin

iwlwifi: pcie: free IML DMA memory allocation

2021-07-19T06:53:12+00:00

[ Upstream commit 310f60f53a86eba680d9bc20a371e13b06a5f903 ]

In the case of gen3 devices with image loader (IML) support,
we were leaking the IML DMA allocation and never freeing it.
Fix that.

Signed-off-by: Johannes Berg 
Signed-off-by: Luca Coelho 
Link: https://lore.kernel.org/r/iwlwifi.20210618105614.07e117dbedb7.I7bb9ebbe0617656986c2a598ea5e827b533bd3b9@changeid
Signed-off-by: Luca Coelho 
Signed-off-by: Sasha Levin

iwlwifi: mvm: don't change band on bound PHY contexts

2021-07-19T06:53:12+00:00

[ Upstream commit 8835a64f74c46baebfc946cd5a2c861b866ebcee ]

When we have a P2P Device active, we attempt to only change the
PHY context it uses when we get a new remain-on-channel, if the
P2P Device is the only user of the PHY context.

This is fine if we're switching within a band, but if we're
switching bands then the switch implies a removal and re-add
of the PHY context, which isn't permitted by the firmware while
it's bound to an interface.

Fix the code to skip the unbind/release/... cycle only if the
band doesn't change (or we have old devices that can switch the
band on the fly as well.)

Signed-off-by: Johannes Berg 
Signed-off-by: Luca Coelho 
Link: https://lore.kernel.org/r/iwlwifi.20210612142637.e9ac313f70f3.I713b9d109957df7e7d9ed0861d5377ce3f8fccd3@changeid
Signed-off-by: Luca Coelho 
Signed-off-by: Sasha Levin

mac80211: remove iwlwifi specific workaround that broke sta NDP tx

2021-07-14T14:53:04+00:00

commit e41eb3e408de27982a5f8f50b2dd8002bed96908 upstream.

Sending nulldata packets is important for sw AP link probing and detecting
4-address mode links. The checks that dropped these packets were apparently
added to work around an iwlwifi firmware bug with multi-TID aggregation.

Fixes: 41cbb0f5a295 ("mac80211: add support for HE")
Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau 
Link: https://lore.kernel.org/r/20210619101517.90806-1-nbd@nbd.name
Signed-off-by: Johannes Berg 
Signed-off-by: Greg Kroah-Hartman

ipw2x00: potential buffer overflow in libipw_wx_set_encodeext()

2021-05-14T07:44:13+00:00

commit 260a9ad9446723d4063ed802989758852809714d upstream.

The "ext->key_len" is a u16 that comes from the user.  If it's over
SCM_KEY_LEN (32) that could lead to memory corruption.

Fixes: e0d369d1d969 ("[PATCH] ieee82011: Added WE-18 support to default wireless extension handler")
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter 
Acked-by: Stanislav Yakovlev 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/YHaoA1i+8uT4ir4h@mwanda
Signed-off-by: Greg Kroah-Hartman

iwlwifi: Fix softirq/hardirq disabling in iwl_pcie_gen2_enqueue_hcmd()

2021-05-07T08:51:37+00:00

commit e7020bb068d8be50a92f48e36b236a1a1ef9282e upstream.

Analogically to what we did in 2800aadc18a6 ("iwlwifi: Fix softirq/hardirq
disabling in iwl_pcie_enqueue_hcmd()"), we must apply the same fix to
iwl_pcie_gen2_enqueue_hcmd(), as it's being called from exactly the same
contexts.

Reported-by: Heiner Kallweit 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/nycvar.YFH.7.76.2104171112390.18270@cbobk.fhfr.pm
Signed-off-by: Jari Ruusu 
Signed-off-by: Greg Kroah-Hartman