linux-stable.git/drivers/net/wireless/intel, branch v5.3.11

iwlwifi: pcie: 0x2720 is qu and 0x30DC is not

2019-11-12T18:27:48+00:00

[ Upstream commit 17c216ed6b9eef34e647192063f6149d33eff579 ]

When converting the wrong qu configurations in an earlier commit, I
accidentally swapped 0x2720 and 0x30DC.  Instead of converting 0x2720,
I converted 0x30DC.  Undo 0x30DC and convert 0x2720.

Signed-off-by: Luca Coelho 
Signed-off-by: Kalle Valo 
Signed-off-by: Sasha Levin

iwlwifi: pcie: fix all 9460 entries for qnj

2019-11-12T18:27:47+00:00

[ Upstream commit e55890150a961944e861a46efc8599f80f25de76 ]

A bunch of the entries for qnj were wrong.  The 9460 device doesn't
exist, so update them to 9461 and 9462.  There are still a bunch of
other occurrences of 9460, but that will be fixed separately.

Signed-off-by: Luca Coelho 
Signed-off-by: Kalle Valo 
Signed-off-by: Sasha Levin

iwlwifi: pcie: fix PCI ID 0x2720 configs that should be soc

2019-11-12T18:27:47+00:00

[ Upstream commit 6dea7da7019aa04c02edf1878c9c2e59d6cb75a5 ]

Some entries for PCI ID 0x2720 were using iwl9260_2ac_cfg, but the
correct is to use iwl9260_2ac_cfg_soc.  Fix that.

Signed-off-by: Luca Coelho 
Signed-off-by: Kalle Valo 
Signed-off-by: Sasha Levin

iwlwifi: exclude GEO SAR support for 3168

2019-11-06T12:09:30+00:00

commit 12e36d98d3e5acf5fc57774e0a15906d55f30cb9 upstream.

We currently support two NICs in FW version 29, namely 7265D and 3168.
Out of these, only 7265D supports GEO SAR, so adjust the function that
checks for it accordingly.

Signed-off-by: Luca Coelho 
Fixes: f5a47fae6aa3 ("iwlwifi: mvm: fix version check for GEO_TX_POWER_LIMIT support")
Signed-off-by: Luca Coelho 
Signed-off-by: Greg Kroah-Hartman

iwlwifi: pcie: change qu with jf devices to use qu configuration

2019-10-29T08:22:20+00:00

commit aa0cc7dde17bb6b8cc533bbcfe3f53d70e0dd269 upstream.

There were a bunch of devices with qu and jf that were loading the
configuration with pu and jf, which is wrong.  Fix them all
accordingly.  Additionally, remove 0x1010 and 0x1210 subsytem IDs from
the list, since they are obviously wrong, and 0x0044 and 0x0244, which
were duplicate.

Cc: stable@vger.kernel.org # 5.1+
Signed-off-by: Luca Coelho 
Signed-off-by: Greg Kroah-Hartman

iwlwifi: fw: don't send GEO_TX_POWER_LIMIT command to FW version 36

2019-10-05T13:12:13+00:00

commit fddbfeece9c7882cc47754c7da460fe427e3e85b upstream.

The intention was to have the GEO_TX_POWER_LIMIT command in FW version
36 as well, but not all 8000 family got this feature enabled.  The
8000 family is the only one using version 36, so skip this version
entirely.  If we try to send this command to the firmwares that do not
support it, we get a BAD_COMMAND response from the firmware.

This fixes https://bugzilla.kernel.org/show_bug.cgi?id=204151.

Cc: stable@vger.kernel.org # 4.19+
Signed-off-by: Luca Coelho 
Signed-off-by: Kalle Valo 
Signed-off-by: Greg Kroah-Hartman

iwlwifi: assign directly to iwl_trans->cfg in QuZ detection

2019-09-03T13:50:59+00:00

We were erroneously assigning the new configuration to a local
variable cfg, but that was not being assigned to anything, so the
change was getting lost.  Assign directly to iwl_trans->cfg instead.

Fixes: 5a8c31aa6357 ("iwlwifi: pcie: fix recognition of QuZ devices")
Cc: stable@vger.kernel.org # 5.2
Signed-off-by: Luca Coelho 
Signed-off-by: Kalle Valo

iwlwifi: pcie: handle switching killer Qu B0 NICs to C0

2019-08-29T14:38:34+00:00

We need to use a different firmware for C0 versions of killer Qu NICs.
Add structures for them and handle them in the if block that detects
C0 revisions.

Additionally, instead of having an inclusive check for QnJ devices,
make the selection exclusive, so that switching to QnJ is the
exception, not the default.  This prevents us from having to add all
the non-QnJ cards to an exclusion list.  To do so, only go into the
QnJ block if the device has an RF ID type HR and HW revision QnJ.

Cc: stable@vger.kernel.org # 5.2
Signed-off-by: Luca Coelho 
Link: https://lore.kernel.org/r/20190821171732.2266-1-luca@coelho.fi
Signed-off-by: Johannes Berg

iwlwifi: pcie: fix recognition of QuZ devices

2019-08-20T14:00:42+00:00

If the HW revision of Qu devices we found is QuZ, then we need to
switch the configuration accordingly in order to use the correct FW.

Add a block of ifs in order do that.

Signed-off-by: Luca Coelho 
Signed-off-by: Kalle Valo

iwlwifi: pcie: don't switch FW to qnj when ax201 is detected

2019-08-20T14:00:41+00:00

We have a too generic condition that switches from Qu configurations
to QnJ configurations.  We need to exclude some configurations so that
they are not erroneously switched.  Add the ax201 configuration to the
list of exclusions.

Signed-off-by: Luca Coelho 
Signed-off-by: Kalle Valo