linux-stable.git/drivers/net/wireless/intel, branch v5.10.7

iwlwifi: mvm: hook up missing RX handlers

2020-12-30T10:53:46+00:00

[ Upstream commit 8a59d39033c35bb484f6bd91891db86ebe07fdc2 ]

The RX handlers for probe response data and channel switch weren't
hooked up properly, fix that.

Fixes: 86e177d80ff7 ("iwlwifi: mvm: add NOA and CSA to a probe response")
Fixes: d3a108a48dc6 ("iwlwifi: mvm: Support CSA countdown offloading")
Signed-off-by: Johannes Berg 
Signed-off-by: Luca Coelho 
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.2d07dcee0d35.I07a61b5d734478db57d9434ff303e4c90bf6c32b@changeid
Signed-off-by: Luca Coelho 
Signed-off-by: Sasha Levin

iwlwifi: dbg-tlv: fix old length in is_trig_data_contained()

2020-12-30T10:53:46+00:00

[ Upstream commit 58a1c9f9a9b6b9092ae10b84f6b571a06596e296 ]

There's a bug in the lengths - the 'old length' needs to be calculated
using the 'old' pointer, of course, likely a copy/paste mistake. Fix
this.

Reported-by: Daniel Gabay 
Signed-off-by: Johannes Berg 
Fixes: cf29c5b66b9f ("iwlwifi: dbg_ini: implement time point handling")
Signed-off-by: Luca Coelho 
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.c0105ddffa74.I1ddb243053ff763c91b663748b6a593ecc3b5634@changeid
Signed-off-by: Luca Coelho 
Signed-off-by: Sasha Levin

iwlwifi: pcie: add some missing entries for AX210

2020-12-02T19:01:35+00:00

Some subsytem device IDs were missing from the list, so some AX210
devices were not recognized.  Add them.

Signed-off-by: Golan Ben Ami 
Signed-off-by: Luca Coelho 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/iwlwifi.20201202143859.a06ba7540449.I7390305d088a49c1043c9b489154fe057989c18f@changeid
Link: https://lore.kernel.org/r/20201121003411.9450-1-ikegami.t@gmail.com

iwlwifi: pcie: invert values of NO_160 device config entries

2020-12-02T19:01:33+00:00

The NO_160 flag specifies if the device doesn't have 160 MHz support,
but we errorneously assumed the opposite.  If the flag was set, we
were considering that 160 MHz was supported, but it's actually the
opposite.  Fix it by inverting the bits, i.e. NO_160 is 0x1 and 160
is 0x0.

Fixes: d6f2134a3831 ("iwlwifi: add mac/rf types and 160MHz to the device tables")
Signed-off-by: Luca Coelho 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/iwlwifi.20201202143859.375bec857ccb.I83884286b688965293e9810381808039bd7eedae@changeid

iwlwifi: pcie: add one missing entry for AX210

2020-12-02T19:01:32+00:00

The 0x0024 subsytem device ID was missing from the list, so some AX210
devices were not recognized.  Add it.

Signed-off-by: Luca Coelho 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/iwlwifi.20201202143859.308eab4db42c.I3763196cd3f7bb36f3dcabf02ec4e7c4fe859c0f@changeid

iwlwifi: mvm: fix kernel panic in case of assert during CSA

2020-11-10T18:45:36+00:00

During CSA, we briefly nullify the phy context, in __iwl_mvm_unassign_vif_chanctx.
In case we have a FW assert right after it, it remains NULL though.
We end up running into endless loop due to mac80211 trying repeatedly to
move us to ASSOC state, and we keep returning -EINVAL. Later down the road
we hit a kernel panic.

Detect and avoid this endless loop.

Signed-off-by: Sara Sharon 
Signed-off-by: Luca Coelho 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/iwlwifi.20201107104557.d64de2c17bff.Iedd0d2afa20a2aacba5259a5cae31cb3a119a4eb@changeid

iwlwifi: pcie: set LTR to avoid completion timeout

2020-11-10T18:45:35+00:00

On some platforms, the preset values aren't correct and then we may
get a completion timeout in the firmware. Change the LTR configuration
to avoid that. The firmware will do some more complex reinit of this
later, but for the boot process we use ~250usec.

Signed-off-by: Johannes Berg 
Signed-off-by: Luca Coelho 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/iwlwifi.20201107104557.d83d591c05ba.I42885c9fb500bc08b9a4c07c4ff3d436cc7a3c84@changeid

iwlwifi: mvm: write queue_sync_state only for sync

2020-11-10T18:45:34+00:00

We use mvm->queue_sync_state to wait for synchronous queue sync
messages, but if an async one happens inbetween we shouldn't
clear mvm->queue_sync_state after sending the async one, that
can run concurrently (at least from the CPU POV) with another
synchronous queue sync.

Signed-off-by: Johannes Berg 
Fixes: 3c514bf831ac ("iwlwifi: mvm: add a loose synchronization of the NSSN across Rx queues")
Signed-off-by: Luca Coelho 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/iwlwifi.20201107104557.51a3148f2c14.I0772171dbaec87433a11513e9586d98b5d920b5f@changeid

iwlwifi: mvm: properly cancel a session protection for P2P

2020-11-10T18:45:32+00:00

We need to feed the configuration id to remove  session protection
properly.
Remember the conf_id when we add the session protection so that we
can give it back when we want to remove the session protection.
While at it, slightly improve the kernel doc for the conf_id
of the notification.

Signed-off-by: Emmanuel Grumbach 
Fixes: fe959c7b2049 ("iwlwifi: mvm: use the new session protection command")
Signed-off-by: Luca Coelho 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/iwlwifi.20201107104557.3642f730333d.I01a98ecde62096d00d171cf34ad775bf80cb0277@changeid

iwlwifi: mvm: use the HOT_SPOT_CMD to cancel an AUX ROC

2020-11-10T18:45:31+00:00

The ROC that runs on the AUX ROC (meaning an ROC on the STA vif),
was added with the HOT_SPOT_CMD firmware command and must be
cancelled with that same command.

Signed-off-by: Emmanuel Grumbach 
Fixes: fe959c7b2049 ("iwlwifi: mvm: use the new session protection command")
Signed-off-by: Luca Coelho 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/iwlwifi.20201107104557.a317376154da.I44fa3637373ba4bd421cdff2cabc761bffc0735f@changeid