linux-stable.git/drivers/net/wireless/intel, branch v4.19.71

iwlwifi: mvm: fix version check for GEO_TX_POWER_LIMIT support

2019-08-16T08:12:54+00:00

commit f5a47fae6aa3eb06f100e701d2342ee56b857bee upstream.

We erroneously added a check for FW API version 41 before sending
GEO_TX_POWER_LIMIT, but this was already implemented in version 38.
Additionally, it was cherry-picked to older versions, namely 17, 26
and 29, so check for those as well.

Cc: stable@vger.kernel.org
Fixes: eca1e56ceedd ("iwlwifi: mvm: don't send GEO_TX_POWER_LIMIT to old firmwares")
Signed-off-by: Luca Coelho 
Signed-off-by: Johannes Berg 
Signed-off-by: Greg Kroah-Hartman

iwlwifi: mvm: don't send GEO_TX_POWER_LIMIT on version < 41

2019-08-16T08:12:54+00:00

commit 39bd984c203e86f3109b49c2a2e20677c4d3ab65 upstream.

Firmware versions before 41 don't support the GEO_TX_POWER_LIMIT
command, and sending it to the firmware will cause a firmware crash.
We allow this via debugfs, so we need to return an error value in case
it's not supported.

This had already been fixed during init, when we send the command if
the ACPI WGDS table is present.  Fix it also for the other,
userspace-triggered case.

Cc: stable@vger.kernel.org
Fixes: 7fe90e0e3d60 ("iwlwifi: mvm: refactor geo init")
Signed-off-by: Luca Coelho 
Signed-off-by: Johannes Berg 
Signed-off-by: Greg Kroah-Hartman

iwlwifi: mvm: fix an out-of-bound access

2019-08-16T08:12:53+00:00

commit ba3224db78034435e9ff0247277cce7c7bb1756c upstream.

The index for the elements of the ACPI object we dereference
was static. This means that if we called the function twice
we wouldn't start from 3 again, but rather from the latest
index we reached in the previous call.
This was dutifully reported by KASAN.

Fix this.

Cc: stable@vger.kernel.org
Fixes: 6996490501ed ("iwlwifi: mvm: add support for EWRD (Dynamic SAR) ACPI table")
Signed-off-by: Emmanuel Grumbach 
Signed-off-by: Johannes Berg 
Signed-off-by: Greg Kroah-Hartman

iwlwifi: don't unmap as page memory that was mapped as single

2019-08-16T08:12:53+00:00

commit 87e7e25aee6b59fef740856f4e86d4b60496c9e1 upstream.

In order to remember how to unmap a memory (as single or
as page), we maintain a bit per Transmit Buffer (TBs) in
the meta data (structure iwl_cmd_meta).
We maintain a bitmap: 1 bit per TB.
If the TB is set, we will free the memory as a page.
This bitmap was never cleared. Fix this.

Cc: stable@vger.kernel.org
Fixes: 3cd1980b0cdf ("iwlwifi: pcie: introduce new tfd and tb formats")
Signed-off-by: Emmanuel Grumbach 
Signed-off-by: Johannes Berg 
Signed-off-by: Greg Kroah-Hartman

iwlwifi: fix RF-Kill interrupt while FW load for gen2 devices

2019-07-26T07:14:22+00:00

commit ed3e4c6d3cd8f093a3636cb05492429fe2af228d upstream.

Newest devices have a new firmware load mechanism. This
mechanism is called the context info. It means that the
driver doesn't need to load the sections of the firmware.
The driver rather prepares a place in DRAM, with pointers
to the relevant sections of the firmware, and the firmware
loads itself.
At the end of the process, the firmware sends the ALIVE
interrupt. This is different from the previous scheme in
which the driver expected the FH_TX interrupt after each
section being transferred over the DMA.

In order to support this new flow, we enabled all the
interrupts. This broke the assumption that we have in the
code that the RF-Kill interrupt can't interrupt the firmware
load flow.

Change the context info flow to enable only the ALIVE
interrupt, and re-enable all the other interrupts only
after the firmware is alive. Then, we won't see the RF-Kill
interrupt until then. Getting the RF-Kill interrupt while
loading the firmware made us kill the firmware while it is
loading and we ended up dumping garbage instead of the firmware
state.

Re-enable the ALIVE | RX interrupts from the ISR when we
get the ALIVE interrupt to be able to get the RX interrupt
that comes immediately afterwards for the ALIVE
notification. This is needed for non MSI-X only.

Cc: stable@vger.kernel.org
Signed-off-by: Emmanuel Grumbach 
Signed-off-by: Luca Coelho 
Signed-off-by: Greg Kroah-Hartman

iwlwifi: don't WARN when calling iwl_get_shared_mem_conf with RF-Kill

2019-07-26T07:14:22+00:00

commit 0d53cfd0cca3c729a089c39eef0e7d8ae7662974 upstream.

iwl_mvm_send_cmd returns 0 when the command won't be sent
because RF-Kill is asserted. Do the same when we call
iwl_get_shared_mem_conf since it is not sent through
iwl_mvm_send_cmd but directly calls the transport layer.

Cc: stable@vger.kernel.org
Signed-off-by: Emmanuel Grumbach 
Signed-off-by: Luca Coelho 
Signed-off-by: Greg Kroah-Hartman

iwlwifi: pcie: fix ALIVE interrupt handling for gen2 devices w/o MSI-X

2019-07-26T07:14:22+00:00

commit ec46ae30245ecb41d73f8254613db07c653fb498 upstream.

We added code to restock the buffer upon ALIVE interrupt
when MSI-X is disabled. This was added as part of the context
info code. This code was added only if the ISR debug level
is set which is very unlikely to be related.
Move this code to run even when the ISR debug level is not
set.

Note that gen2 devices work with MSI-X in most cases so that
this path is seldom used.

Cc: stable@vger.kernel.org
Signed-off-by: Emmanuel Grumbach 
Signed-off-by: Luca Coelho 
Signed-off-by: Greg Kroah-Hartman

iwlwifi: pcie: don't service an interrupt that was masked

2019-07-26T07:14:22+00:00

commit 3b57a10ca14c619707398dc58fe5ece18c95b20b upstream.

Sometimes the register status can include interrupts that
were masked. We can, for example, get the RF-Kill bit set
in the interrupt status register although this interrupt
was masked. Then if we get the ALIVE interrupt (for example)
that was not masked, we need to *not* service the RF-Kill
interrupt.
Fix this in the MSI-X interrupt handler.

Cc: stable@vger.kernel.org
Signed-off-by: Emmanuel Grumbach 
Signed-off-by: Luca Coelho 
Signed-off-by: Greg Kroah-Hartman

iwlwifi: mvm: Drop large non sta frames

2019-07-26T07:14:14+00:00

[ Upstream commit ac70499ee97231a418dc1a4d6c9dc102e8f64631 ]

In some buggy scenarios we could possible attempt to transmit frames larger
than maximum MSDU size. Since our devices don't know how to handle this,
it may result in asserts, hangs etc.
This can happen, for example, when we receive a large multicast frame
and try to transmit it back to the air in AP mode.
Since in a legal scenario this should never happen, drop such frames and
warn about it.

Signed-off-by: Andrei Otcheretianski 
Signed-off-by: Luca Coelho 
Signed-off-by: Sasha Levin

iwlwifi: Fix double-free problems in iwl_req_fw_callback()

2019-07-14T06:11:06+00:00

[ Upstream commit a8627176b0de7ba3f4524f641ddff4abf23ae4e4 ]

In the error handling code of iwl_req_fw_callback(), iwl_dealloc_ucode()
is called to free data. In iwl_drv_stop(), iwl_dealloc_ucode() is called
again, which can cause double-free problems.

To fix this bug, the call to iwl_dealloc_ucode() in
iwl_req_fw_callback() is deleted.

This bug is found by a runtime fuzzing tool named FIZZER written by us.

Signed-off-by: Jia-Ju Bai 
Signed-off-by: Luca Coelho 
Signed-off-by: Kalle Valo 
Signed-off-by: Sasha Levin