linux-stable.git/drivers/net/wireless/intel, branch v4.19.30

iwlwifi: mvm: fix setting HE ppe FW config

2019-02-12T18:47:14+00:00

[ Upstream commit 189b8d441b0f7825f0b4278851c52afaa0515ed2 ]

The FW expects to get the ppe value for each NSS-BW pair in the same
format as in the he phy capabilities IE, which means that a value of 0
implies ppe should be used for BPSK (mcs 0). If there are no PPE
thresholds in the IE, or if for some NSS-RU pair there's no threshold
set for it (this could happen because it's a variable-sized field), it
means no PPE should not be used for that pair, so the value sent to FW
should be 7 which corresponds to "none".

Fixes: 514c30696fbc ("iwlwifi: add support for IEEE802.11ax")
Signed-off-by: Naftali Goldstein 
Signed-off-by: Luca Coelho 
Signed-off-by: Kalle Valo 
Signed-off-by: Sasha Levin

iwlwifi: fw: do not set sgi bits for HE connection

2019-02-12T18:46:59+00:00

[ Upstream commit 5c2dbebb446539eb9640bf59a02756d6e7f1fc53 ]

If the association supports HE, HT/VHT rates will never be used for Tx
and therefore there's no need to set the sgi-per-channel-width-support
bits, so don't set them in this case.

Fixes: 110b32f065f3 ("iwlwifi: mvm: rs: add basic implementation of the new RS API handlers")
Signed-off-by: Naftali Goldstein 
Signed-off-by: Luca Coelho 
Signed-off-by: Sasha Levin

iwlwifi: mvm: Send LQ command as async when necessary

2019-01-26T08:32:44+00:00

commit 3baf7528d6f832b28622d1ddadd2e47f6c2b5e08 upstream.

The parameter that indicated whether the LQ command should be sent
as sync or async was removed, causing the LQ command to be sent as
sync from interrupt context (e.g. from the RX path). This resulted
in a kernel warning: "scheduling while atomic" and failing to send
the LQ command, which ultimately leads to a queue hang.

Fix it by adding back the required parameter to send the command as
sync only when it is allowed.

Fixes: d94c5a820d10 ("iwlwifi: mvm: open BA session only when sta is authorized")
Signed-off-by: Avraham Stern 
Signed-off-by: Luca Coelho 
Signed-off-by: Emmanuel Grumbach 
Signed-off-by: Greg Kroah-Hartman

iwlwifi: add new cards for 9560, 9462, 9461 and killer series

2018-12-29T12:37:58+00:00

commit f108703cb5f199d0fc98517ac29a997c4c646c94 upstream.

add few PCI ID'S for 9560, 9462, 9461 and killer series.

Cc: stable@vger.kernel.org
Signed-off-by: Ihab Zhaika 
Signed-off-by: Luca Coelho 
Signed-off-by: Greg Kroah-Hartman

iwlwifi: mvm: don't send GEO_TX_POWER_LIMIT to old firmwares

2018-12-29T12:37:58+00:00

commit eca1e56ceedd9cc185eb18baf307d3ff2e4af376 upstream.

Old firmware versions don't support this command. Sending it
to any firmware before -41.ucode will crash the firmware.

This fixes https://bugzilla.kernel.org/show_bug.cgi?id=201975

Fixes: 66e839030fd6 ("iwlwifi: fix wrong WGDS_WIFI_DATA_SIZE")
CC:  #4.19+
Signed-off-by: Emmanuel Grumbach 
Signed-off-by: Luca Coelho 
Signed-off-by: Kalle Valo 
Signed-off-by: Greg Kroah-Hartman

iwlwifi: mvm: don't use SAR Geo if basic SAR is not used

2018-12-01T08:37:26+00:00

commit 5d041c46ccb9b48acc110e214beff5e2789311df upstream.

We can't use SAR Geo if basic SAR is not enabled, since the SAR Geo
tables define offsets in relation to the basic SAR table in use.

To fix this, make iwl_mvm_sar_init() return one in case WRDS is not
available, so we can skip reading WGDS entirely.

Fixes: a6bff3cb19b7 ("iwlwifi: mvm: add GEO_TX_POWER_LIMIT cmd for geographic tx power table")
Cc: stable@vger.kernel.org # 4.12+
Signed-off-by: Luca Coelho 
Signed-off-by: Greg Kroah-Hartman

iwlwifi: mvm: fix regulatory domain update when the firmware starts

2018-12-01T08:37:26+00:00

commit 82715ac71e6b94a2c2136e31f3a8e6748e33aa8c upstream.

When the firmware starts, it doesn't have any regulatory
information, hence it uses the world wide limitations. The
driver can feed the firmware with previous knowledge that
was kept in the driver, but the firmware may still not
update its internal tables.

This happens when we start a BSS interface, and then the
firmware can change the regulatory tables based on our
location and it'll use more lenient, location specific
rules. Then, if the firmware is shut down (when the
interface is brought down), and then an AP interface is
created, the firmware will forget the country specific
rules.

The host will think that we are in a certain country that
may allow channels and will try to teach the firmware about
our location, but the firmware may still not allow to drop
the world wide limitations and apply country specific rules
because it was just re-started.

In this case, the firmware will reply with MCC_RESP_ILLEGAL
to the MCC_UPDATE_CMD. In that case, iwlwifi needs to let
the upper layers (cfg80211 / hostapd) know that the channel
list they know about has been updated.

This fixes https://bugzilla.kernel.org/show_bug.cgi?id=201105

Cc: stable@vger.kernel.org
Signed-off-by: Emmanuel Grumbach 
Signed-off-by: Luca Coelho 
Signed-off-by: Greg Kroah-Hartman

iwlwifi: mvm: support sta_statistics() even on older firmware

2018-12-01T08:37:26+00:00

commit ec484d03ef0df8d34086b95710e355a259cbe1f2 upstream.

The oldest firmware supported by iwlmvm do support getting
the average beacon RSSI. Enable the sta_statistics() call
from mac80211 even on older firmware versions.

Fixes: 33cef9256342 ("iwlwifi: mvm: support beacon statistics for BSS client")
Cc: stable@vger.kernel.org # 4.2+
Signed-off-by: Emmanuel Grumbach 
Signed-off-by: Luca Coelho 
Signed-off-by: Greg Kroah-Hartman

iwlwifi: fix wrong WGDS_WIFI_DATA_SIZE

2018-12-01T08:37:26+00:00

commit 66e839030fd698586734e017fd55c4f2a89dba0b upstream.

From coreboot/BIOS:
Name ("WGDS", Package() {
 Revision,
 Package() {
     DomainType,                         // 0x7:WiFi ==> We miss this one.
     WgdsWiFiSarDeltaGroup1PowerMax1,    // Group 1 FCC 2400 Max
     WgdsWiFiSarDeltaGroup1PowerChainA1, // Group 1 FCC 2400 A Offset
     WgdsWiFiSarDeltaGroup1PowerChainB1, // Group 1 FCC 2400 B Offset
     WgdsWiFiSarDeltaGroup1PowerMax2,    // Group 1 FCC 5200 Max
     WgdsWiFiSarDeltaGroup1PowerChainA2, // Group 1 FCC 5200 A Offset
     WgdsWiFiSarDeltaGroup1PowerChainB2, // Group 1 FCC 5200 B Offset
     WgdsWiFiSarDeltaGroup2PowerMax1,    // Group 2 EC Jap 2400 Max
     WgdsWiFiSarDeltaGroup2PowerChainA1, // Group 2 EC Jap 2400 A Offset
     WgdsWiFiSarDeltaGroup2PowerChainB1, // Group 2 EC Jap 2400 B Offset
     WgdsWiFiSarDeltaGroup2PowerMax2,    // Group 2 EC Jap 5200 Max
     WgdsWiFiSarDeltaGroup2PowerChainA2, // Group 2 EC Jap 5200 A Offset
     WgdsWiFiSarDeltaGroup2PowerChainB2, // Group 2 EC Jap 5200 B Offset
     WgdsWiFiSarDeltaGroup3PowerMax1,    // Group 3 ROW 2400 Max
     WgdsWiFiSarDeltaGroup3PowerChainA1, // Group 3 ROW 2400 A Offset
     WgdsWiFiSarDeltaGroup3PowerChainB1, // Group 3 ROW 2400 B Offset
     WgdsWiFiSarDeltaGroup3PowerMax2,    // Group 3 ROW 5200 Max
     WgdsWiFiSarDeltaGroup3PowerChainA2, // Group 3 ROW 5200 A Offset
     WgdsWiFiSarDeltaGroup3PowerChainB2, // Group 3 ROW 5200 B Offset
 }
})

When read the ACPI data to find out the WGDS, the DATA_SIZE is never
matched.
From the above format, it gives 19 numbers, but our driver is hardcode
as 18.
Fix it to pass then can parse the data into our wgds table.
Then we will see:
iwlwifi 0000:01:00.0: U iwl_mvm_sar_geo_init Sending GEO_TX_POWER_LIMIT
iwlwifi 0000:01:00.0: U iwl_mvm_sar_geo_init SAR geographic profile[0]
Band[0]: chain A = 68 chain B = 69 max_tx_power = 54
iwlwifi 0000:01:00.0: U iwl_mvm_sar_geo_init SAR geographic profile[0]
Band[1]: chain A = 48 chain B = 49 max_tx_power = 70
iwlwifi 0000:01:00.0: U iwl_mvm_sar_geo_init SAR geographic profile[1]
Band[0]: chain A = 51 chain B = 67 max_tx_power = 50
iwlwifi 0000:01:00.0: U iwl_mvm_sar_geo_init SAR geographic profile[1]
Band[1]: chain A = 69 chain B = 70 max_tx_power = 68
iwlwifi 0000:01:00.0: U iwl_mvm_sar_geo_init SAR geographic profile[2]
Band[0]: chain A = 49 chain B = 50 max_tx_power = 48
iwlwifi 0000:01:00.0: U iwl_mvm_sar_geo_init SAR geographic profile[2]
Band[1]: chain A = 52 chain B = 53 max_tx_power = 51

Cc: stable@vger.kernel.org # 4.12+
Fixes: a6bff3cb19b7 ("iwlwifi: mvm: add GEO_TX_POWER_LIMIT cmd for geographic tx power table")
Signed-off-by: Matt Chen 
Signed-off-by: Luca Coelho 
Signed-off-by: Greg Kroah-Hartman

iwlwifi: mvm: check return value of rs_rate_from_ucode_rate()

2018-11-13T19:08:41+00:00

commit 3d71c3f1f50cf309bd20659422af549bc784bfff upstream.

The rs_rate_from_ucode_rate() function may return -EINVAL if the rate
is invalid, but none of the callsites check for the error, potentially
making us access arrays with index IWL_RATE_INVALID, which is larger
than the arrays, causing an out-of-bounds access.  This will trigger
KASAN warnings, such as the one reported in the bugzilla issue
mentioned below.

This fixes https://bugzilla.kernel.org/show_bug.cgi?id=200659

Cc: stable@vger.kernel.org
Signed-off-by: Luca Coelho 
Signed-off-by: Kalle Valo 
Signed-off-by: Greg Kroah-Hartman