linux-stable.git/drivers/net/wireless/intel, branch v4.19.2

iwlwifi: mvm: check return value of rs_rate_from_ucode_rate()

2018-11-13T19:08:41+00:00

commit 3d71c3f1f50cf309bd20659422af549bc784bfff upstream.

The rs_rate_from_ucode_rate() function may return -EINVAL if the rate
is invalid, but none of the callsites check for the error, potentially
making us access arrays with index IWL_RATE_INVALID, which is larger
than the arrays, causing an out-of-bounds access.  This will trigger
KASAN warnings, such as the one reported in the bugzilla issue
mentioned below.

This fixes https://bugzilla.kernel.org/show_bug.cgi?id=200659

Cc: stable@vger.kernel.org
Signed-off-by: Luca Coelho 
Signed-off-by: Kalle Valo 
Signed-off-by: Greg Kroah-Hartman

iwlwifi: mvm: fix BAR seq ctrl reporting

2018-11-13T19:08:30+00:00

[ Upstream commit 941ab4eb66c10bc5c7234e83a7a858b2806ed151 ]

There is a bug in FW where the sequence control may be
incorrect, and the driver overrides it with the value
of the ieee80211 header.

However, in BAR there is no sequence control in the header,
which result with arbitrary sequence.

This access to an unknown location is bad and it makes the
logs very confusing - so fix it.

Signed-off-by: Sara Sharon 
Signed-off-by: Luca Coelho 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

iwlwifi: mvm: check for n_profiles validity in EWRD ACPI

2018-11-13T19:08:23+00:00

[ Upstream commit 2e1976bb75263fbad918e82184b16a23bd721546 ]

When reading the profiles from the EWRD table in ACPI, we loop over
the data and set it into our internal table.  We use the number of
profiles specified in ACPI without checking its validity, so if the
ACPI table is corrupted and the number is larger than our array size,
we will try to make an out-of-bounds access.

Fix this by making sure the value specified in the ACPI table is
valid.

Fixes: 6996490501ed ("iwlwifi: mvm: add support for EWRD (Dynamic SAR) ACPI table")
Signed-off-by: Luca Coelho 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

iwlwifi: mvm: clear HW_RESTART_REQUESTED when stopping the interface

2018-11-13T19:08:23+00:00

[ Upstream commit 155f7e0441cd121b1e673d465a35e99f4b9b2f0b ]

Fix a bug that happens in the following scenario:
1) suspend without WoWLAN
2) mac80211 calls drv_stop because of the suspend
3) __iwl_mvm_mac_stop deallocates the aux station
4) during drv_stop the firmware crashes
5) iwlmvm:
	* sets IWL_MVM_STATUS_HW_RESTART_REQUESTED
	* asks mac80211 to kick the restart flow
6) mac80211 puts the restart worker into a freezable
   queue which means that the worker will not run for now
   since the workqueue is already frozen
7) ...
8) resume
9) mac80211 runs ieee80211_reconfig as part of the resume
10) mac80211 detects that a restart flow has been requested
    and that we are now resuming from suspend and cancels
    the restart worker
11) mac80211 calls drv_start()
12) __iwl_mvm_mac_start checks that IWL_MVM_STATUS_HW_RESTART_REQUESTED
    clears it, sets IWL_MVM_STATUS_IN_HW_RESTART and calls
    iwl_mvm_restart_cleanup()
13) iwl_fw_error_dump gets called and accesses the device
    to get debug data
14) iwl_mvm_up adds the aux station
15) iwl_mvm_add_aux_sta() allocates an internal station for
    the aux station
16) iwl_mvm_allocate_int_sta() tests IWL_MVM_STATUS_IN_HW_RESTART
    and doesn't really allocate a station ID for the aux
    station
17) a new queue is added for the aux station

Note that steps from 5 to 9 aren't really part of the
problem but were described for the sake of completeness.

Once the iwl_mvm_mac_stop() is called, the device is not
accessible, meaning that step 12) can't succeed and we'll
see the following:

drivers/net/wireless/intel/iwlwifi/pcie/trans.c:2122 iwl_trans_pcie_grab_nic_access+0xc0/0x1d6 [iwlwifi]()
Timeout waiting for hardware access (CSR_GP_CNTRL 0x080403d8)
Call Trace:
[] iwl_trans_pcie_grab_nic_access+0xc0/0x1d6 [iwlwifi]
[] iwl_trans_pcie_dump_regs+0x3fd/0x3fd [iwlwifi]
[] iwl_fw_error_dump+0x4f5/0xe8b [iwlwifi]
[] __iwl_mvm_mac_start+0x5a/0x21a [iwlmvm]
[] iwl_mvm_mac_start+0xd4/0x103 [iwlmvm]
[] drv_start+0xa1/0xc5 [iwl7000_mac80211]
[] ieee80211_reconfig+0x145/0xf50 [mac80211]
[] ieee80211_resume+0x62/0x66 [mac80211]
[] wiphy_resume+0xa9/0xc6 [cfg80211]

The station id of the aux station is set to 0xff in step 3
and because we don't really allocate a new station id for
the auxliary station (as explained in 16), we end up sending
a command to the firmware asking to connect the queue
to station id 0xff. This makes the firmware crash with the
following information:

0x00002093 | ADVANCED_SYSASSERT
0x000002F0 | trm_hw_status0
0x00000000 | trm_hw_status1
0x00000B38 | branchlink2
0x0001978C | interruptlink1
0x00000000 | interruptlink2
0xFF080501 | data1
0xDEADBEEF | data2
0xDEADBEEF | data3
Firmware error during reconfiguration - reprobe!
FW error in SYNC CMD SCD_QUEUE_CFG

Fix this by clearing IWL_MVM_STATUS_HW_RESTART_REQUESTED
in iwl_mvm_mac_stop(). We won't be able to collect debug
data anyway and when we will brought up again, we will
have a clean state from the firmware perspective.
Since we won't have IWL_MVM_STATUS_IN_HW_RESTART set in
step 12) we won't get to the 2093 ASSERT either.

Fixes: bf8b286f86fc ("iwlwifi: mvm: defer setting IWL_MVM_STATUS_IN_HW_RESTART")
Signed-off-by: Emmanuel Grumbach 
Signed-off-by: Luca Coelho 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

iwlwifi: pcie: avoid empty free RB queue

2018-11-13T19:08:23+00:00

[ Upstream commit 868a1e863f95183f00809363fefba6d4f5bcd116 ]

If all free RB queues are empty, the driver will never restock the
free RB queue.  That's because the restocking happens in the Rx flow,
and if the free queue is empty there will be no Rx.

Although there's a background worker (a.k.a. allocator) allocating
memory for RBs so that the Rx handler can restock them, the worker may
run only after the free queue has become empty (and then it is too
late for restocking as explained above).

There is a solution for that called 'emergency': If the number of used
RB's reaches half the amount of all RB's, the Rx handler will not wait
for the allocator but immediately allocate memory for the used RB's
and restock the free queue.

But, since the used RB's is per queue, it may happen that the used
RB's are spread between the queues such that the emergency check will
fail for each of the queues
(and still run out of RBs, causing the above symptom).

To fix it, move to emergency mode if the sum of *all* used RBs (for
all Rx queues) reaches half the amount of all RB's

Signed-off-by: Shaul Triebitz 
Signed-off-by: Luca Coelho 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

Merge tag 'wireless-drivers-for-davem-2018-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers

2018-10-02T23:16:59+00:00

Kalle Valo says:

====================
wireless-drivers fixes for 4.19

First, and also hopefully the last, set of fixes for 4.19. All small
but still important fixes

mt76x0

* fix a bug when a virtual interface is removed multiple times

b43

* fix DMA error related regression with proprietary firmware

iwlwifi

* fix an oops which was a regression in v4.19-rc1
====================

Signed-off-by: David S. Miller

iwlwifi: 1000: set the TFD queue size

2018-09-27T18:20:36+00:00

.max_tfd_queue_size was ommited for 1000 card serries leading to oops in
swiotlb.

Fixes: 7b3e42ea2ead ("iwlwifi: support multiple tfd queue max sizes for different devices")
Tested-by: Randy Dunlap 
Signed-off-by: Pavel Machek 
Signed-off-by: Emmanuel Grumbach 
Signed-off-by: Luca Coelho 
Signed-off-by: Kalle Valo

Merge tag 'mac80211-for-davem-2018-09-03' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

2018-09-04T05:12:02+00:00

Johannes Berg says:

====================
Here are quite a large number of fixes, notably:
 * various A-MSDU building fixes (currently only affects mt76)
 * syzkaller & spectre fixes in hwsim
 * TXQ vs. teardown fix that was causing crashes
 * embed WMM info in reg rule, bad code here had been causing crashes
 * one compilation issue with fix from Arnd (rfkill-gpio includes)
 * fixes for a race and bad data during/after channel switch
 * nl80211: a validation fix, attribute type & unit fixes
along with other small fixes.
====================

Signed-off-by: David S. Miller

cfg80211: make wmm_rule part of the reg_rule structure

2018-08-28T09:11:47+00:00

Make wmm_rule be part of the reg_rule structure. This simplifies the
code a lot at the cost of having bigger memory usage. However in most
cases we have only few reg_rule's and when we do have many like in
iwlwifi we do not save memory as it allocates a separate wmm_rule for
each channel anyway.

This also fixes a bug reported in various places where somewhere the
pointers were corrupted and we ended up doing a null-dereference.

Fixes: 230ebaa189af ("cfg80211: read wmm rules from regulatory database")
Signed-off-by: Stanislaw Gruszka 
[rephrase commit message slightly]
Signed-off-by: Johannes Berg

Merge tag 'pci-v4.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

2018-08-16T16:21:54+00:00

Pull pci updates from Bjorn Helgaas:

 - Decode AER errors with names similar to "lspci" (Tyler Baicar)

 - Expose AER statistics in sysfs (Rajat Jain)

 - Clear AER status bits selectively based on the type of recovery (Oza
   Pawandeep)

 - Honor "pcie_ports=native" even if HEST sets FIRMWARE_FIRST (Alexandru
   Gagniuc)

 - Don't clear AER status bits if we're using the "Firmware-First"
   strategy where firmware owns the registers (Alexandru Gagniuc)

 - Use sysfs_match_string() to simplify ASPM sysfs parsing (Andy
   Shevchenko)

 - Remove unnecessary includes of  (Bjorn Helgaas)

 - Defer DPC event handling to work queue (Keith Busch)

 - Use threaded IRQ for DPC bottom half (Keith Busch)

 - Print AER status while handling DPC events (Keith Busch)

 - Work around IDT switch ACS Source Validation erratum (James
   Puthukattukaran)

 - Emit diagnostics for all cases of PCIe Link downtraining (Links
   operating slower than they're capable of) (Alexandru Gagniuc)

 - Skip VFs when configuring Max Payload Size (Myron Stowe)

 - Reduce Root Port Max Payload Size if necessary when hot-adding a
   device below it (Myron Stowe)

 - Simplify SHPC existence/permission checks (Bjorn Helgaas)

 - Remove hotplug sample skeleton driver (Lukas Wunner)

 - Convert pciehp to threaded IRQ handling (Lukas Wunner)

 - Improve pciehp tolerance of missed events and initially unstable
   links (Lukas Wunner)

 - Clear spurious pciehp events on resume (Lukas Wunner)

 - Add pciehp runtime PM support, including for Thunderbolt controllers
   (Lukas Wunner)

 - Support interrupts from pciehp bridges in D3hot (Lukas Wunner)

 - Mark fall-through switch cases before enabling -Wimplicit-fallthrough
   (Gustavo A. R. Silva)

 - Move DMA-debug PCI init from arch code to PCI core (Christoph
   Hellwig)

 - Fix pci_request_irq() usage of IRQF_ONESHOT when no handler is
   supplied (Heiner Kallweit)

 - Unify PCI and DMA direction #defines (Shunyong Yang)

 - Add PCI_DEVICE_DATA() macro (Andy Shevchenko)

 - Check for VPD completion before checking for timeout (Bert Kenward)

 - Limit Netronome NFP5000 config space size to work around erratum
   (Jakub Kicinski)

 - Set IRQCHIP_ONESHOT_SAFE for PCI MSI irqchips (Heiner Kallweit)

 - Document ACPI description of PCI host bridges (Bjorn Helgaas)

 - Add "pci=disable_acs_redir=" parameter to disable ACS redirection for
   peer-to-peer DMA support (we don't have the peer-to-peer support yet;
   this is just one piece) (Logan Gunthorpe)

 - Clean up devm_of_pci_get_host_bridge_resources() resource allocation
   (Jan Kiszka)

 - Fixup resizable BARs after suspend/resume (Christian König)

 - Make "pci=earlydump" generic (Sinan Kaya)

 - Fix ROM BAR access routines to stay in bounds and check for signature
   correctly (Rex Zhu)

 - Add DMA alias quirk for Microsemi Switchtec NTB (Doug Meyer)

 - Expand documentation for pci_add_dma_alias() (Logan Gunthorpe)

 - To avoid bus errors, enable PASID only if entire path supports
   End-End TLP prefixes (Sinan Kaya)

 - Unify slot and bus reset functions and remove hotplug knowledge from
   callers (Sinan Kaya)

 - Add Function-Level Reset quirks for Intel and Samsung NVMe devices to
   fix guest reboot issues (Alex Williamson)

 - Add function 1 DMA alias quirk for Marvell 88SS9183 PCIe SSD
   Controller (Bjorn Helgaas)

 - Remove Xilinx AXI-PCIe host bridge arch dependency (Palmer Dabbelt)

 - Remove Aardvark outbound window configuration (Evan Wang)

 - Fix Aardvark bridge window sizing issue (Zachary Zhang)

 - Convert Aardvark to use pci_host_probe() to reduce code duplication
   (Thomas Petazzoni)

 - Correct the Cadence cdns_pcie_writel() signature (Alan Douglas)

 - Add Cadence support for optional generic PHYs (Alan Douglas)

 - Add Cadence power management ops (Alan Douglas)

 - Remove redundant variable from Cadence driver (Colin Ian King)

 - Add Kirin MSI support (Xiaowei Song)

 - Drop unnecessary root_bus_nr setting from exynos, imx6, keystone,
   armada8k, artpec6, designware-plat, histb, qcom, spear13xx (Shawn
   Guo)

 - Move link notification settings from DesignWare core to individual
   drivers (Gustavo Pimentel)

 - Add endpoint library MSI-X interfaces (Gustavo Pimentel)

 - Correct signature of endpoint library IRQ interfaces (Gustavo
   Pimentel)

 - Add DesignWare endpoint library MSI-X callbacks (Gustavo Pimentel)

 - Add endpoint library MSI-X test support (Gustavo Pimentel)

 - Remove unnecessary GFP_ATOMIC from Hyper-V "new child" allocation
   (Jia-Ju Bai)

 - Add more devices to Broadcom PAXC quirk (Ray Jui)

 - Work around corrupted Broadcom PAXC config space to enable SMMU and
   GICv3 ITS (Ray Jui)

 - Disable MSI parsing to work around broken Broadcom PAXC logic in some
   devices (Ray Jui)

 - Hide unconfigured functions to work around a Broadcom PAXC defect
   (Ray Jui)

 - Lower iproc log level to reduce console output during boot (Ray Jui)

 - Fix mobiveil iomem/phys_addr_t type usage (Lorenzo Pieralisi)

 - Fix mobiveil missing include file (Lorenzo Pieralisi)

 - Add mobiveil Kconfig/Makefile support (Lorenzo Pieralisi)

 - Fix mvebu I/O space remapping issues (Thomas Petazzoni)

 - Use generic pci_host_bridge in mvebu instead of ARM-specific API
   (Thomas Petazzoni)

 - Whitelist VMD devices with fast interrupt handlers to avoid sharing
   vectors with slow handlers (Keith Busch)

* tag 'pci-v4.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (153 commits)
  PCI/AER: Don't clear AER bits if error handling is Firmware-First
  PCI: Limit config space size for Netronome NFP5000
  PCI/MSI: Set IRQCHIP_ONESHOT_SAFE for PCI-MSI irqchips
  PCI/VPD: Check for VPD access completion before checking for timeout
  PCI: Add PCI_DEVICE_DATA() macro to fully describe device ID entry
  PCI: Match Root Port's MPS to endpoint's MPSS as necessary
  PCI: Skip MPS logic for Virtual Functions (VFs)
  PCI: Add function 1 DMA alias quirk for Marvell 88SS9183
  PCI: Check for PCIe Link downtraining
  PCI: Add ACS Redirect disable quirk for Intel Sunrise Point
  PCI: Add device-specific ACS Redirect disable infrastructure
  PCI: Convert device-specific ACS quirks from NULL termination to ARRAY_SIZE
  PCI: Add "pci=disable_acs_redir=" parameter for peer-to-peer support
  PCI: Allow specifying devices using a base bus and path of devfns
  PCI: Make specifying PCI devices in kernel parameters reusable
  PCI: Hide ACS quirk declarations inside PCI core
  PCI: Delay after FLR of Intel DC P3700 NVMe
  PCI: Disable Samsung SM961/PM961 NVMe before FLR
  PCI: Export pcie_has_flr()
  PCI: mvebu: Drop bogus comment above mvebu_pcie_map_registers()
  ...