linux-stable.git/drivers/net/wireless/intel, branch linux-5.8.y

iwlwifi: dbg: run init_cfg function once per driver load

2020-10-29T09:07:47+00:00

[ Upstream commit 42f8a2735cc218b6b372134684d4cd3c1423f123 ]

Every time we call init_cfg driver appends the enabled triggers
to the active triggers while this should be done only once per
driver load.

Signed-off-by: Mordechay Goodstein 
Fixes: 14124b25780d ("iwlwifi: dbg_ini: implement monitor allocation flow")
Signed-off-by: Luca Coelho 
Link: https://lore.kernel.org/r/iwlwifi.20200930161256.79bd622e604a.Ie0f79d2ea90ca5cdf363f56194ead81b0a2c6202@changeid
Signed-off-by: Luca Coelho 
Signed-off-by: Sasha Levin

iwlwifi: dbg: remove no filter condition

2020-10-29T09:07:47+00:00

[ Upstream commit bfdb157127dab2a85d4096a68a00ad568c9eb590 ]

Currently if group-id and command-id values are zero we
trigger and collect every RX frame,
this is not the right behavior and zero value
should be handled like any other filter.

Signed-off-by: Mordechay Goodstein 
Fixes: 3ed34fbf9d3b ("iwlwifi: dbg_ini: support FW response/notification region type")
Signed-off-by: Luca Coelho 
Link: https://lore.kernel.org/r/iwlwifi.20200930161256.6a0aae2c0507.I7bd72968279d586af420472707d53106b35efc08@changeid
Signed-off-by: Luca Coelho 
Signed-off-by: Sasha Levin

iwlwifi: mvm: split a print to avoid a WARNING in ROC

2020-10-29T09:07:47+00:00

[ Upstream commit 903b3f9badf1d54f77b468b96706dab679b45b14 ]

A print in the remain on channel code was too long and caused
a WARNING, split it.

Signed-off-by: Emmanuel Grumbach 
Fixes: dc28e12f2125 ("iwlwifi: mvm: ROC: Extend the ROC max delay duration & limit ROC duration")
Signed-off-by: Luca Coelho 
Link: https://lore.kernel.org/r/iwlwifi.20200930102759.58d57c0bdc68.Ib06008665e7bf1199c360aa92691d9c74fb84990@changeid
Signed-off-by: Luca Coelho 
Signed-off-by: Sasha Levin

iwlegacy: Check the return value of pcie_capability_read_*()

2020-08-19T06:26:20+00:00

[ Upstream commit 9018fd7f2a73e9b290f48a56b421558fa31e8b75 ]

On failure pcie_capability_read_dword() sets it's last parameter, val
to 0. However, with Patch 14/14, it is possible that val is set to ~0 on
failure. This would introduce a bug because (x & x) == (~0 & x).

This bug can be avoided without changing the function's behaviour if the
return value of pcie_capability_read_dword is checked to confirm success.

Check the return value of pcie_capability_read_dword() to ensure success.

Suggested-by: Bjorn Helgaas 
Signed-off-by: Bolarinwa Olayemi Saheed 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/20200713175529.29715-3-refactormyself@gmail.com
Signed-off-by: Sasha Levin

iwlwifi: Make some Killer Wireless-AC 1550 cards work again

2020-07-20T16:38:58+00:00

Fix the regression introduced by commit c8685937d07f ("iwlwifi: move
pu devices to new table") by adding the ids and the configurations of
two missing Killer 1550 cards in order to configure and let them work
correctly again (following the new table convention).
Resolve bug 208141 ("Wireless ac 9560 not working kernel 5.7.2",
https://bugzilla.kernel.org/show_bug.cgi?id=208141).

Fixes: c8685937d07f ("iwlwifi: move pu devices to new table")
Signed-off-by: Alessio Bonfiglio 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/20200714091911.4442-1-alessio.bonfiglio@mail.polimi.it

iwlwifi: fix crash in iwl_dbg_tlv_alloc_trigger

2020-06-23T08:26:22+00:00

The tlv passed to iwl_dbg_tlv_alloc_trigger comes from a loaded firmware
file. The memory can be marked as read-only as firmware could be
shared. In anyway, writing to this memory is not expected. So,
iwl_dbg_tlv_alloc_trigger can crash now:

  BUG: unable to handle page fault for address: ffffae2c01bfa794
  PF: supervisor write access in kernel mode
  PF: error_code(0x0003) - permissions violation
  PGD 107d51067 P4D 107d51067 PUD 107d52067 PMD 659ad2067 PTE 8000000662298161
  CPU: 2 PID: 161 Comm: kworker/2:1 Not tainted 5.7.0-3.gad96a07-default #1 openSUSE Tumbleweed (unreleased)
  RIP: 0010:iwl_dbg_tlv_alloc_trigger+0x25/0x60 [iwlwifi]
  Code: eb f2 0f 1f 00 66 66 66 66 90 83 7e 04 33 48 89 f8 44 8b 46 10 48 89 f7 76 40 41 8d 50 ff 83 fa 19 77 23 8b 56 20 85 d2 75 07  46 20 ff ff ff ff 4b 8d 14 40 48 c1 e2 04 48 8d b4 10 00 05 00
  RSP: 0018:ffffae2c00417ce8 EFLAGS: 00010246
  RAX: ffff8f0522334018 RBX: ffff8f0522334018 RCX: ffffffffc0fc26c0
  RDX: 0000000000000000 RSI: ffffae2c01bfa774 RDI: ffffae2c01bfa774
  RBP: 0000000000000000 R08: 0000000000000004 R09: 0000000000000001
  R10: 0000000000000034 R11: ffffae2c01bfa77c R12: ffff8f0522334230
  R13: 0000000001000009 R14: ffff8f0523fdbc00 R15: ffff8f051f395800
  FS:  0000000000000000(0000) GS:ffff8f0527c80000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: ffffae2c01bfa794 CR3: 0000000389eba000 CR4: 00000000000006e0
  Call Trace:
   iwl_dbg_tlv_alloc+0x79/0x120 [iwlwifi]
   iwl_parse_tlv_firmware.isra.0+0x57d/0x1550 [iwlwifi]
   iwl_req_fw_callback+0x3f8/0x6a0 [iwlwifi]
   request_firmware_work_func+0x47/0x90
   process_one_work+0x1e3/0x3b0
   worker_thread+0x46/0x340
   kthread+0x115/0x140
   ret_from_fork+0x1f/0x40

As can be seen, write bit is not set in the PTE. Read of
trig->occurrences succeeds in iwl_dbg_tlv_alloc_trigger, but
trig->occurrences = cpu_to_le32(-1); fails there, obviously.

This is likely because we (at SUSE) use compressed firmware and that is
marked as RO after decompression (see fw_map_paged_buf).

Fix it by creating a temporary buffer in case we need to change the
memory.

Signed-off-by: Jiri Slaby 
Reported-by: Dieter Nützel 
Tested-by: Dieter Nützel 
Cc: Johannes Berg 
Cc: Emmanuel Grumbach 
Cc: Luca Coelho 
Cc: Intel Linux Wireless 
Cc: Kalle Valo 
Cc: "David S. Miller" 
Cc: Jakub Kicinski 
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/20200612073800.27742-1-jslaby@suse.cz

iwlwifi: mvm: don't call iwl_mvm_free_inactive_queue() under RCU

2020-06-23T08:24:48+00:00

iwl_mvm_free_inactive_queue() will sleep in synchronize_net() under
some circumstances, so don't call it under RCU. There doesn't appear
to be a need for RCU protection around this particular call.

Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Johannes Berg 
Signed-off-by: Luca Coelho 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/iwlwifi.20200403112332.0f49448c133d.I17fd308bc4a9491859c9b112f4eb5d2c3fc18d7d@changeid

treewide: replace '---help---' in Kconfig files with 'help'

2020-06-13T16:57:21+00:00

Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.

This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.

There are a variety of indentation styles found.

  a) 4 spaces + '---help---'
  b) 7 spaces + '---help---'
  c) 8 spaces + '---help---'
  d) 1 space + 1 tab + '---help---'
  e) 1 tab + '---help---'    (correct indentation)
  f) 1 tab + 1 space + '---help---'
  g) 1 tab + 2 spaces + '---help---'

In order to convert all of them to 1 tab + 'help', I ran the
following commend:

  $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'

Signed-off-by: Masahiro Yamada

iwlwifi: bump FW API to 56 for AX devices

2020-05-29T07:32:46+00:00

Start supporting API version 56 for AX devices.

Signed-off-by: Luca Coelho 
Link: https://lore.kernel.org/r/iwlwifi.20200529092401.aabbc5b472ee.I88cb2c3d2d07e62eac3671335ff1fb80b73c5839@changeid

iwlwifi: mvm: add support for range request version 10

2020-05-29T07:32:41+00:00

Range request version 10 keeps the same command size as version 9
but uses 2 reserved fields for the responder beacon interval and
station id (if exists).
For now, since the beacon interval of unassoc APs is unknown, use
a value of 100 TUs which is a common value for many APs.

While at it, remove the definition for CCMP_256 cipher, since this
is not supported.

Signed-off-by: Avraham Stern 
Signed-off-by: Luca Coelho 
Link: https://lore.kernel.org/r/iwlwifi.20200529092401.b7ccdad0805f.I59ea7f773caed85a66c61401066ae169008442e6@changeid