<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-stable.git/drivers/net/wireless/intel, branch linux-5.4.y</title>
<subtitle>Linux kernel stable tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/'/>
<entry>
<title>wifi: iwlegacy: Check rate_idx range after addition</title>
<updated>2025-08-28T14:21:27+00:00</updated>
<author>
<name>Stanislaw Gruszka</name>
<email>stf_xl@wp.pl</email>
</author>
<published>2025-05-25T14:45:24+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=1870f42bd95da79299e94a90c9c2421e5bbeea9e'/>
<id>1870f42bd95da79299e94a90c9c2421e5bbeea9e</id>
<content type='text'>
[ Upstream commit 0de19d5ae0b2c5b18b88c5c7f0442f707a207409 ]

Limit rate_idx to IL_LAST_OFDM_RATE for 5GHz band for thinkable case
the index is incorrect.

Reported-by: Fedor Pchelkin &lt;pchelkin@ispras.ru&gt;
Reported-by: Alexei Safin &lt;a.safin@rosa.ru&gt;
Signed-off-by: Stanislaw Gruszka &lt;stf_xl@wp.pl&gt;
Reviewed-by: Fedor Pchelkin &lt;pchelkin@ispras.ru&gt;
Link: https://patch.msgid.link/20250525144524.GA172583@wp.pl
Signed-off-by: Johannes Berg &lt;johannes.berg@intel.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 0de19d5ae0b2c5b18b88c5c7f0442f707a207409 ]

Limit rate_idx to IL_LAST_OFDM_RATE for 5GHz band for thinkable case
the index is incorrect.

Reported-by: Fedor Pchelkin &lt;pchelkin@ispras.ru&gt;
Reported-by: Alexei Safin &lt;a.safin@rosa.ru&gt;
Signed-off-by: Stanislaw Gruszka &lt;stf_xl@wp.pl&gt;
Reviewed-by: Fedor Pchelkin &lt;pchelkin@ispras.ru&gt;
Link: https://patch.msgid.link/20250525144524.GA172583@wp.pl
Signed-off-by: Johannes Berg &lt;johannes.berg@intel.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>wifi: iwlwifi: fw: Fix possible memory leak in iwl_fw_dbg_collect</title>
<updated>2025-08-28T14:21:27+00:00</updated>
<author>
<name>Pagadala Yesu Anjaneyulu</name>
<email>pagadala.yesu.anjaneyulu@intel.com</email>
</author>
<published>2025-06-11T19:26:23+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=ecd425c5091b018c2b5d786fb70123e2b0c6731f'/>
<id>ecd425c5091b018c2b5d786fb70123e2b0c6731f</id>
<content type='text'>
[ Upstream commit cc8d9cbf269dab363c768bfa9312265bc807fca5 ]

Ensure descriptor is freed on error to avoid memory leak.

Signed-off-by: Pagadala Yesu Anjaneyulu &lt;pagadala.yesu.anjaneyulu@intel.com&gt;
Signed-off-by: Miri Korenblit &lt;miriam.rachel.korenblit@intel.com&gt;
Link: https://patch.msgid.link/20250611222325.8158d15ec866.Ifa3e422c302397111f20a16da7509e6574bc19e3@changeid
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit cc8d9cbf269dab363c768bfa9312265bc807fca5 ]

Ensure descriptor is freed on error to avoid memory leak.

Signed-off-by: Pagadala Yesu Anjaneyulu &lt;pagadala.yesu.anjaneyulu@intel.com&gt;
Signed-off-by: Miri Korenblit &lt;miriam.rachel.korenblit@intel.com&gt;
Link: https://patch.msgid.link/20250611222325.8158d15ec866.Ifa3e422c302397111f20a16da7509e6574bc19e3@changeid
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>wifi: iwlwifi: dvm: fix potential overflow in rs_fill_link_cmd()</title>
<updated>2025-08-28T14:21:27+00:00</updated>
<author>
<name>Rand Deeb</name>
<email>rand.sec96@gmail.com</email>
</author>
<published>2024-03-13T10:17:55+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=137d67e903867062ee27877a8da8d0229ba9a363'/>
<id>137d67e903867062ee27877a8da8d0229ba9a363</id>
<content type='text'>
[ Upstream commit e3ad987e9dc7d1e12e3f2f1e623f0e174cd0ca78 ]

The 'index' variable in the rs_fill_link_cmd() function can reach
LINK_QUAL_MAX_RETRY_NUM during the execution of the inner loop. This
variable is used as an index for the lq_cmd-&gt;rs_table array, which has a
size of LINK_QUAL_MAX_RETRY_NUM, without proper validation.

Modify the condition of the inner loop to ensure that the 'index' variable
does not exceed LINK_QUAL_MAX_RETRY_NUM - 1, thereby preventing any
potential overflow issues.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Signed-off-by: Rand Deeb &lt;rand.sec96@gmail.com&gt;
Link: https://patch.msgid.link/20240313101755.269209-1-rand.sec96@gmail.com
Signed-off-by: Miri Korenblit &lt;miriam.rachel.korenblit@intel.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit e3ad987e9dc7d1e12e3f2f1e623f0e174cd0ca78 ]

The 'index' variable in the rs_fill_link_cmd() function can reach
LINK_QUAL_MAX_RETRY_NUM during the execution of the inner loop. This
variable is used as an index for the lq_cmd-&gt;rs_table array, which has a
size of LINK_QUAL_MAX_RETRY_NUM, without proper validation.

Modify the condition of the inner loop to ensure that the 'index' variable
does not exceed LINK_QUAL_MAX_RETRY_NUM - 1, thereby preventing any
potential overflow issues.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Signed-off-by: Rand Deeb &lt;rand.sec96@gmail.com&gt;
Link: https://patch.msgid.link/20240313101755.269209-1-rand.sec96@gmail.com
Signed-off-by: Miri Korenblit &lt;miriam.rachel.korenblit@intel.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>wifi: iwlwifi: mvm: fix scan request validation</title>
<updated>2025-08-28T14:21:26+00:00</updated>
<author>
<name>Avraham Stern</name>
<email>avraham.stern@intel.com</email>
</author>
<published>2025-07-09T20:05:43+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=aaa6dc2d0feb36b9076b3bc643b808604063af35'/>
<id>aaa6dc2d0feb36b9076b3bc643b808604063af35</id>
<content type='text'>
[ Upstream commit 7c2f3ec7707188d8d5269ae2dce97d7be3e9f261 ]

The scan request validation function uses bitwise and instead
of logical and. Fix it.

Signed-off-by: Avraham Stern &lt;avraham.stern@intel.com&gt;
Reviewed-by: Ilan Peer &lt;ilan.peer@intel.com&gt;
Signed-off-by: Miri Korenblit &lt;miriam.rachel.korenblit@intel.com&gt;
Link: https://patch.msgid.link/20250709230308.3fbc1f27871b.I7a8ee91f463c1a2d9d8561c8232e196885d02c43@changeid
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 7c2f3ec7707188d8d5269ae2dce97d7be3e9f261 ]

The scan request validation function uses bitwise and instead
of logical and. Fix it.

Signed-off-by: Avraham Stern &lt;avraham.stern@intel.com&gt;
Reviewed-by: Ilan Peer &lt;ilan.peer@intel.com&gt;
Signed-off-by: Miri Korenblit &lt;miriam.rachel.korenblit@intel.com&gt;
Link: https://patch.msgid.link/20250709230308.3fbc1f27871b.I7a8ee91f463c1a2d9d8561c8232e196885d02c43@changeid
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>iwlwifi: Add missing check for alloc_ordered_workqueue</title>
<updated>2025-08-28T14:21:19+00:00</updated>
<author>
<name>Jiasheng Jiang</name>
<email>jiasheng@iscas.ac.cn</email>
</author>
<published>2023-01-10T01:48:48+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=c80832d445653baba5ac80cd2c2637c437ac881b'/>
<id>c80832d445653baba5ac80cd2c2637c437ac881b</id>
<content type='text'>
[ Upstream commit 90a0d9f339960448a3acc1437a46730f975efd6a ]

Add check for the return value of alloc_ordered_workqueue since it may
return NULL pointer.

Fixes: b481de9ca074 ("[IWLWIFI]: add iwlwifi wireless drivers")
Signed-off-by: Jiasheng Jiang &lt;jiasheng@iscas.ac.cn&gt;
Link: https://patch.msgid.link/20230110014848.28226-1-jiasheng@iscas.ac.cn
Signed-off-by: Miri Korenblit &lt;miriam.rachel.korenblit@intel.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 90a0d9f339960448a3acc1437a46730f975efd6a ]

Add check for the return value of alloc_ordered_workqueue since it may
return NULL pointer.

Fixes: b481de9ca074 ("[IWLWIFI]: add iwlwifi wireless drivers")
Signed-off-by: Jiasheng Jiang &lt;jiasheng@iscas.ac.cn&gt;
Link: https://patch.msgid.link/20230110014848.28226-1-jiasheng@iscas.ac.cn
Signed-off-by: Miri Korenblit &lt;miriam.rachel.korenblit@intel.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>wifi: iwlwifi: Fix memory leak in iwl_mvm_init()</title>
<updated>2025-08-28T14:21:19+00:00</updated>
<author>
<name>Xiu Jianfeng</name>
<email>xiujianfeng@huawei.com</email>
</author>
<published>2022-11-09T03:52:13+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=ee8cff4694d6803f59ccc78f9b6083b381dafbd6'/>
<id>ee8cff4694d6803f59ccc78f9b6083b381dafbd6</id>
<content type='text'>
[ Upstream commit ed2e916c890944633d6826dce267579334f63ea5 ]

When iwl_opmode_register() fails, it does not unregster rate control,
which will cause a memory leak issue, this patch fixes it.

Fixes: 9f66a397c877 ("iwlwifi: mvm: rs: add ops for the new rate scaling in the FW")
Signed-off-by: Xiu Jianfeng &lt;xiujianfeng@huawei.com&gt;
Link: https://patch.msgid.link/20221109035213.570-1-xiujianfeng@huawei.com
Signed-off-by: Miri Korenblit &lt;miriam.rachel.korenblit@intel.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit ed2e916c890944633d6826dce267579334f63ea5 ]

When iwl_opmode_register() fails, it does not unregster rate control,
which will cause a memory leak issue, this patch fixes it.

Fixes: 9f66a397c877 ("iwlwifi: mvm: rs: add ops for the new rate scaling in the FW")
Signed-off-by: Xiu Jianfeng &lt;xiujianfeng@huawei.com&gt;
Link: https://patch.msgid.link/20221109035213.570-1-xiujianfeng@huawei.com
Signed-off-by: Miri Korenblit &lt;miriam.rachel.korenblit@intel.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>wifi: iwlwifi: fw: allocate chained SG tables for dump</title>
<updated>2025-04-10T12:29:42+00:00</updated>
<author>
<name>Johannes Berg</name>
<email>johannes.berg@intel.com</email>
</author>
<published>2025-02-09T12:34:45+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=f5302f67865fd6b1febf49e9edd21af2f82fbd3e'/>
<id>f5302f67865fd6b1febf49e9edd21af2f82fbd3e</id>
<content type='text'>
[ Upstream commit 7774e3920029398ad49dc848b23840593f14d515 ]

The firmware dumps can be pretty big, and since we use single
pages for each SG table entry, even the table itself may end
up being an order-5 allocation. Build chained tables so that
we need not allocate a higher-order table here.

This could be improved and cleaned up, e.g. by using the SG
pool code or simply kvmalloc(), but all of that would require
also updating the devcoredump first since that frees it all,
so we need to be more careful. SG pool might also run against
the CONFIG_ARCH_NO_SG_CHAIN limitation, which is irrelevant
here.

Also use _devcd_free_sgtable() for the error paths now, much
simpler especially since it's in two places now.

Signed-off-by: Johannes Berg &lt;johannes.berg@intel.com&gt;
Signed-off-by: Miri Korenblit &lt;miriam.rachel.korenblit@intel.com&gt;
Link: https://patch.msgid.link/20250209143303.697c7a465ac9.Iea982df46b5c075bfb77ade36f187d99a70c63db@changeid
Signed-off-by: Johannes Berg &lt;johannes.berg@intel.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 7774e3920029398ad49dc848b23840593f14d515 ]

The firmware dumps can be pretty big, and since we use single
pages for each SG table entry, even the table itself may end
up being an order-5 allocation. Build chained tables so that
we need not allocate a higher-order table here.

This could be improved and cleaned up, e.g. by using the SG
pool code or simply kvmalloc(), but all of that would require
also updating the devcoredump first since that frees it all,
so we need to be more careful. SG pool might also run against
the CONFIG_ARCH_NO_SG_CHAIN limitation, which is irrelevant
here.

Also use _devcd_free_sgtable() for the error paths now, much
simpler especially since it's in two places now.

Signed-off-by: Johannes Berg &lt;johannes.berg@intel.com&gt;
Signed-off-by: Miri Korenblit &lt;miriam.rachel.korenblit@intel.com&gt;
Link: https://patch.msgid.link/20250209143303.697c7a465ac9.Iea982df46b5c075bfb77ade36f187d99a70c63db@changeid
Signed-off-by: Johannes Berg &lt;johannes.berg@intel.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>wifi: iwlwifi: limit printed string from FW file</title>
<updated>2025-03-13T11:43:28+00:00</updated>
<author>
<name>Johannes Berg</name>
<email>johannes.berg@intel.com</email>
</author>
<published>2025-02-09T12:34:51+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=38f0d398b6d7640d223db69df022c4a232f24774'/>
<id>38f0d398b6d7640d223db69df022c4a232f24774</id>
<content type='text'>
[ Upstream commit e0dc2c1bef722cbf16ae557690861e5f91208129 ]

There's no guarantee here that the file is always with a
NUL-termination, so reading the string may read beyond the
end of the TLV. If that's the last TLV in the file, it can
perhaps even read beyond the end of the file buffer.

Fix that by limiting the print format to the size of the
buffer we have.

Fixes: aee1b6385e29 ("iwlwifi: support fseq tlv and print fseq version")
Signed-off-by: Johannes Berg &lt;johannes.berg@intel.com&gt;
Signed-off-by: Miri Korenblit &lt;miriam.rachel.korenblit@intel.com&gt;
Link: https://patch.msgid.link/20250209143303.cb5f9d0c2f5d.Idec695d53c6c2234aade306f7647b576c7e3d928@changeid
Signed-off-by: Johannes Berg &lt;johannes.berg@intel.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit e0dc2c1bef722cbf16ae557690861e5f91208129 ]

There's no guarantee here that the file is always with a
NUL-termination, so reading the string may read beyond the
end of the TLV. If that's the last TLV in the file, it can
perhaps even read beyond the end of the file buffer.

Fix that by limiting the print format to the size of the
buffer we have.

Fixes: aee1b6385e29 ("iwlwifi: support fseq tlv and print fseq version")
Signed-off-by: Johannes Berg &lt;johannes.berg@intel.com&gt;
Signed-off-by: Miri Korenblit &lt;miriam.rachel.korenblit@intel.com&gt;
Link: https://patch.msgid.link/20250209143303.cb5f9d0c2f5d.Idec695d53c6c2234aade306f7647b576c7e3d928@changeid
Signed-off-by: Johannes Berg &lt;johannes.berg@intel.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>wifi: ipw2x00: libipw_rx_any(): fix bad alignment</title>
<updated>2024-12-14T18:44:52+00:00</updated>
<author>
<name>Jiapeng Chong</name>
<email>jiapeng.chong@linux.alibaba.com</email>
</author>
<published>2024-11-01T06:07:25+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=d336bf86802e770c9124dd0398c0a4284d5501d6'/>
<id>d336bf86802e770c9124dd0398c0a4284d5501d6</id>
<content type='text'>
[ Upstream commit 4fa4f049dc0d9741b16c96bcbf0108c85368a2b9 ]

This patch fixes incorrect code alignment.

./drivers/net/wireless/intel/ipw2x00/libipw_rx.c:871:2-3: code aligned with following code on line 882.
./drivers/net/wireless/intel/ipw2x00/libipw_rx.c:886:2-3: code aligned with following code on line 900.

Reported-by: Abaci Robot &lt;abaci@linux.alibaba.com&gt;
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=11381
Signed-off-by: Jiapeng Chong &lt;jiapeng.chong@linux.alibaba.com&gt;
Signed-off-by: Kalle Valo &lt;kvalo@kernel.org&gt;
Link: https://patch.msgid.link/20241101060725.54640-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 4fa4f049dc0d9741b16c96bcbf0108c85368a2b9 ]

This patch fixes incorrect code alignment.

./drivers/net/wireless/intel/ipw2x00/libipw_rx.c:871:2-3: code aligned with following code on line 882.
./drivers/net/wireless/intel/ipw2x00/libipw_rx.c:886:2-3: code aligned with following code on line 900.

Reported-by: Abaci Robot &lt;abaci@linux.alibaba.com&gt;
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=11381
Signed-off-by: Jiapeng Chong &lt;jiapeng.chong@linux.alibaba.com&gt;
Signed-off-by: Kalle Valo &lt;kvalo@kernel.org&gt;
Link: https://patch.msgid.link/20241101060725.54640-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>wifi: iwlegacy: Clear stale interrupts before resuming device</title>
<updated>2024-11-08T15:20:53+00:00</updated>
<author>
<name>Ville Syrjälä</name>
<email>ville.syrjala@linux.intel.com</email>
</author>
<published>2024-10-01T20:07:45+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=9d89941e51259c2b0b8e9c10c6f1f74200d7444f'/>
<id>9d89941e51259c2b0b8e9c10c6f1f74200d7444f</id>
<content type='text'>
commit 07c90acb071b9954e1fecb1e4f4f13d12c544b34 upstream.

iwl4965 fails upon resume from hibernation on my laptop. The reason
seems to be a stale interrupt which isn't being cleared out before
interrupts are enabled. We end up with a race beween the resume
trying to bring things back up, and the restart work (queued form
the interrupt handler) trying to bring things down. Eventually
the whole thing blows up.

Fix the problem by clearing out any stale interrupts before
interrupts get enabled during resume.

Here's a debug log of the indicent:
[   12.042589] ieee80211 phy0: il_isr ISR inta 0x00000080, enabled 0xaa00008b, fh 0x00000000
[   12.042625] ieee80211 phy0: il4965_irq_tasklet inta 0x00000080, enabled 0x00000000, fh 0x00000000
[   12.042651] iwl4965 0000:10:00.0: RF_KILL bit toggled to enable radio.
[   12.042653] iwl4965 0000:10:00.0: On demand firmware reload
[   12.042690] ieee80211 phy0: il4965_irq_tasklet End inta 0x00000000, enabled 0xaa00008b, fh 0x00000000, flags 0x00000282
[   12.052207] ieee80211 phy0: il4965_mac_start enter
[   12.052212] ieee80211 phy0: il_prep_station Add STA to driver ID 31: ff:ff:ff:ff:ff:ff
[   12.052244] ieee80211 phy0: il4965_set_hw_ready hardware  ready
[   12.052324] ieee80211 phy0: il_apm_init Init card's basic functions
[   12.052348] ieee80211 phy0: il_apm_init L1 Enabled; Disabling L0S
[   12.055727] ieee80211 phy0: il4965_load_bsm Begin load bsm
[   12.056140] ieee80211 phy0: il4965_verify_bsm Begin verify bsm
[   12.058642] ieee80211 phy0: il4965_verify_bsm BSM bootstrap uCode image OK
[   12.058721] ieee80211 phy0: il4965_load_bsm BSM write complete, poll 1 iterations
[   12.058734] ieee80211 phy0: __il4965_up iwl4965 is coming up
[   12.058737] ieee80211 phy0: il4965_mac_start Start UP work done.
[   12.058757] ieee80211 phy0: __il4965_down iwl4965 is going down
[   12.058761] ieee80211 phy0: il_scan_cancel_timeout Scan cancel timeout
[   12.058762] ieee80211 phy0: il_do_scan_abort Not performing scan to abort
[   12.058765] ieee80211 phy0: il_clear_ucode_stations Clearing ucode stations in driver
[   12.058767] ieee80211 phy0: il_clear_ucode_stations No active stations found to be cleared
[   12.058819] ieee80211 phy0: _il_apm_stop Stop card, put in low power state
[   12.058827] ieee80211 phy0: _il_apm_stop_master stop master
[   12.058864] ieee80211 phy0: il4965_clear_free_frames 0 frames on pre-allocated heap on clear.
[   12.058869] ieee80211 phy0: Hardware restart was requested
[   16.132299] iwl4965 0000:10:00.0: START_ALIVE timeout after 4000ms.
[   16.132303] ------------[ cut here ]------------
[   16.132304] Hardware became unavailable upon resume. This could be a software issue prior to suspend or a hardware issue.
[   16.132338] WARNING: CPU: 0 PID: 181 at net/mac80211/util.c:1826 ieee80211_reconfig+0x8f/0x14b0 [mac80211]
[   16.132390] Modules linked in: ctr ccm sch_fq_codel xt_tcpudp xt_multiport xt_state iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv4 ip_tables x_tables binfmt_misc joydev mousedev btusb btrtl btintel btbcm bluetooth ecdh_generic ecc iTCO_wdt i2c_dev iwl4965 iwlegacy coretemp snd_hda_codec_analog pcspkr psmouse mac80211 snd_hda_codec_generic libarc4 sdhci_pci cqhci sha256_generic sdhci libsha256 firewire_ohci snd_hda_intel snd_intel_dspcfg mmc_core snd_hda_codec snd_hwdep firewire_core led_class iosf_mbi snd_hda_core uhci_hcd lpc_ich crc_itu_t cfg80211 ehci_pci ehci_hcd snd_pcm usbcore mfd_core rfkill snd_timer snd usb_common soundcore video parport_pc parport intel_agp wmi intel_gtt backlight e1000e agpgart evdev
[   16.132456] CPU: 0 UID: 0 PID: 181 Comm: kworker/u8:6 Not tainted 6.11.0-cl+ #143
[   16.132460] Hardware name: Hewlett-Packard HP Compaq 6910p/30BE, BIOS 68MCU Ver. F.19 07/06/2010
[   16.132463] Workqueue: async async_run_entry_fn
[   16.132469] RIP: 0010:ieee80211_reconfig+0x8f/0x14b0 [mac80211]
[   16.132501] Code: da 02 00 00 c6 83 ad 05 00 00 00 48 89 df e8 98 1b fc ff 85 c0 41 89 c7 0f 84 e9 02 00 00 48 c7 c7 a0 e6 48 a0 e8 d1 77 c4 e0 &lt;0f&gt; 0b eb 2d 84 c0 0f 85 8b 01 00 00 c6 87 ad 05 00 00 00 e8 69 1b
[   16.132504] RSP: 0018:ffffc9000029fcf0 EFLAGS: 00010282
[   16.132507] RAX: 0000000000000000 RBX: ffff8880072008e0 RCX: 0000000000000001
[   16.132509] RDX: ffffffff81f21a18 RSI: 0000000000000086 RDI: 0000000000000001
[   16.132510] RBP: ffff8880072003c0 R08: 0000000000000000 R09: 0000000000000003
[   16.132512] R10: 0000000000000000 R11: ffff88807e5b0000 R12: 0000000000000001
[   16.132514] R13: 0000000000000000 R14: 0000000000000000 R15: 00000000ffffff92
[   16.132515] FS:  0000000000000000(0000) GS:ffff88807c200000(0000) knlGS:0000000000000000
[   16.132517] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   16.132519] CR2: 000055dd43786c08 CR3: 000000000978f000 CR4: 00000000000006f0
[   16.132521] Call Trace:
[   16.132525]  &lt;TASK&gt;
[   16.132526]  ? __warn+0x77/0x120
[   16.132532]  ? ieee80211_reconfig+0x8f/0x14b0 [mac80211]
[   16.132564]  ? report_bug+0x15c/0x190
[   16.132568]  ? handle_bug+0x36/0x70
[   16.132571]  ? exc_invalid_op+0x13/0x60
[   16.132573]  ? asm_exc_invalid_op+0x16/0x20
[   16.132579]  ? ieee80211_reconfig+0x8f/0x14b0 [mac80211]
[   16.132611]  ? snd_hdac_bus_init_cmd_io+0x24/0x200 [snd_hda_core]
[   16.132617]  ? pick_eevdf+0x133/0x1c0
[   16.132622]  ? check_preempt_wakeup_fair+0x70/0x90
[   16.132626]  ? wakeup_preempt+0x4a/0x60
[   16.132628]  ? ttwu_do_activate.isra.0+0x5a/0x190
[   16.132632]  wiphy_resume+0x79/0x1a0 [cfg80211]
[   16.132675]  ? wiphy_suspend+0x2a0/0x2a0 [cfg80211]
[   16.132697]  dpm_run_callback+0x75/0x1b0
[   16.132703]  device_resume+0x97/0x200
[   16.132707]  async_resume+0x14/0x20
[   16.132711]  async_run_entry_fn+0x1b/0xa0
[   16.132714]  process_one_work+0x13d/0x350
[   16.132718]  worker_thread+0x2be/0x3d0
[   16.132722]  ? cancel_delayed_work_sync+0x70/0x70
[   16.132725]  kthread+0xc0/0xf0
[   16.132729]  ? kthread_park+0x80/0x80
[   16.132732]  ret_from_fork+0x28/0x40
[   16.132735]  ? kthread_park+0x80/0x80
[   16.132738]  ret_from_fork_asm+0x11/0x20
[   16.132741]  &lt;/TASK&gt;
[   16.132742] ---[ end trace 0000000000000000 ]---
[   16.132930] ------------[ cut here ]------------
[   16.132932] WARNING: CPU: 0 PID: 181 at net/mac80211/driver-ops.c:41 drv_stop+0xe7/0xf0 [mac80211]
[   16.132957] Modules linked in: ctr ccm sch_fq_codel xt_tcpudp xt_multiport xt_state iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv4 ip_tables x_tables binfmt_misc joydev mousedev btusb btrtl btintel btbcm bluetooth ecdh_generic ecc iTCO_wdt i2c_dev iwl4965 iwlegacy coretemp snd_hda_codec_analog pcspkr psmouse mac80211 snd_hda_codec_generic libarc4 sdhci_pci cqhci sha256_generic sdhci libsha256 firewire_ohci snd_hda_intel snd_intel_dspcfg mmc_core snd_hda_codec snd_hwdep firewire_core led_class iosf_mbi snd_hda_core uhci_hcd lpc_ich crc_itu_t cfg80211 ehci_pci ehci_hcd snd_pcm usbcore mfd_core rfkill snd_timer snd usb_common soundcore video parport_pc parport intel_agp wmi intel_gtt backlight e1000e agpgart evdev
[   16.133014] CPU: 0 UID: 0 PID: 181 Comm: kworker/u8:6 Tainted: G        W          6.11.0-cl+ #143
[   16.133018] Tainted: [W]=WARN
[   16.133019] Hardware name: Hewlett-Packard HP Compaq 6910p/30BE, BIOS 68MCU Ver. F.19 07/06/2010
[   16.133021] Workqueue: async async_run_entry_fn
[   16.133025] RIP: 0010:drv_stop+0xe7/0xf0 [mac80211]
[   16.133048] Code: 48 85 c0 74 0e 48 8b 78 08 89 ea 48 89 de e8 e0 87 04 00 65 ff 0d d1 de c4 5f 0f 85 42 ff ff ff e8 be 52 c2 e0 e9 38 ff ff ff &lt;0f&gt; 0b 5b 5d c3 0f 1f 40 00 41 54 49 89 fc 55 53 48 89 f3 2e 2e 2e
[   16.133050] RSP: 0018:ffffc9000029fc50 EFLAGS: 00010246
[   16.133053] RAX: 0000000000000000 RBX: ffff8880072008e0 RCX: ffff88800377f6c0
[   16.133054] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff8880072008e0
[   16.133056] RBP: 0000000000000000 R08: ffffffff81f238d8 R09: 0000000000000000
[   16.133058] R10: ffff8880080520f0 R11: 0000000000000000 R12: ffff888008051c60
[   16.133060] R13: ffff8880072008e0 R14: 0000000000000000 R15: ffff8880072011d8
[   16.133061] FS:  0000000000000000(0000) GS:ffff88807c200000(0000) knlGS:0000000000000000
[   16.133063] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   16.133065] CR2: 000055dd43786c08 CR3: 000000000978f000 CR4: 00000000000006f0
[   16.133067] Call Trace:
[   16.133069]  &lt;TASK&gt;
[   16.133070]  ? __warn+0x77/0x120
[   16.133075]  ? drv_stop+0xe7/0xf0 [mac80211]
[   16.133098]  ? report_bug+0x15c/0x190
[   16.133100]  ? handle_bug+0x36/0x70
[   16.133103]  ? exc_invalid_op+0x13/0x60
[   16.133105]  ? asm_exc_invalid_op+0x16/0x20
[   16.133109]  ? drv_stop+0xe7/0xf0 [mac80211]
[   16.133132]  ieee80211_do_stop+0x55a/0x810 [mac80211]
[   16.133161]  ? fq_codel_reset+0xa5/0xc0 [sch_fq_codel]
[   16.133164]  ieee80211_stop+0x4f/0x180 [mac80211]
[   16.133192]  __dev_close_many+0xa2/0x120
[   16.133195]  dev_close_many+0x90/0x150
[   16.133198]  dev_close+0x5d/0x80
[   16.133200]  cfg80211_shutdown_all_interfaces+0x40/0xe0 [cfg80211]
[   16.133223]  wiphy_resume+0xb2/0x1a0 [cfg80211]
[   16.133247]  ? wiphy_suspend+0x2a0/0x2a0 [cfg80211]
[   16.133269]  dpm_run_callback+0x75/0x1b0
[   16.133273]  device_resume+0x97/0x200
[   16.133277]  async_resume+0x14/0x20
[   16.133280]  async_run_entry_fn+0x1b/0xa0
[   16.133283]  process_one_work+0x13d/0x350
[   16.133287]  worker_thread+0x2be/0x3d0
[   16.133290]  ? cancel_delayed_work_sync+0x70/0x70
[   16.133294]  kthread+0xc0/0xf0
[   16.133296]  ? kthread_park+0x80/0x80
[   16.133299]  ret_from_fork+0x28/0x40
[   16.133302]  ? kthread_park+0x80/0x80
[   16.133304]  ret_from_fork_asm+0x11/0x20
[   16.133307]  &lt;/TASK&gt;
[   16.133308] ---[ end trace 0000000000000000 ]---
[   16.133335] ieee80211 phy0: PM: dpm_run_callback(): wiphy_resume [cfg80211] returns -110
[   16.133360] ieee80211 phy0: PM: failed to restore async: error -110

Cc: stable@vger.kernel.org
Cc: Stanislaw Gruszka &lt;stf_xl@wp.pl&gt;
Cc: Kalle Valo &lt;kvalo@kernel.org&gt;
Cc: linux-wireless@vger.kernel.org
Signed-off-by: Ville Syrjälä &lt;ville.syrjala@linux.intel.com&gt;
Acked-by: Stanislaw Gruszka &lt;stf_xl@wp.pl&gt;
Signed-off-by: Kalle Valo &lt;kvalo@kernel.org&gt;
Link: https://patch.msgid.link/20241001200745.8276-1-ville.syrjala@linux.intel.com
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 07c90acb071b9954e1fecb1e4f4f13d12c544b34 upstream.

iwl4965 fails upon resume from hibernation on my laptop. The reason
seems to be a stale interrupt which isn't being cleared out before
interrupts are enabled. We end up with a race beween the resume
trying to bring things back up, and the restart work (queued form
the interrupt handler) trying to bring things down. Eventually
the whole thing blows up.

Fix the problem by clearing out any stale interrupts before
interrupts get enabled during resume.

Here's a debug log of the indicent:
[   12.042589] ieee80211 phy0: il_isr ISR inta 0x00000080, enabled 0xaa00008b, fh 0x00000000
[   12.042625] ieee80211 phy0: il4965_irq_tasklet inta 0x00000080, enabled 0x00000000, fh 0x00000000
[   12.042651] iwl4965 0000:10:00.0: RF_KILL bit toggled to enable radio.
[   12.042653] iwl4965 0000:10:00.0: On demand firmware reload
[   12.042690] ieee80211 phy0: il4965_irq_tasklet End inta 0x00000000, enabled 0xaa00008b, fh 0x00000000, flags 0x00000282
[   12.052207] ieee80211 phy0: il4965_mac_start enter
[   12.052212] ieee80211 phy0: il_prep_station Add STA to driver ID 31: ff:ff:ff:ff:ff:ff
[   12.052244] ieee80211 phy0: il4965_set_hw_ready hardware  ready
[   12.052324] ieee80211 phy0: il_apm_init Init card's basic functions
[   12.052348] ieee80211 phy0: il_apm_init L1 Enabled; Disabling L0S
[   12.055727] ieee80211 phy0: il4965_load_bsm Begin load bsm
[   12.056140] ieee80211 phy0: il4965_verify_bsm Begin verify bsm
[   12.058642] ieee80211 phy0: il4965_verify_bsm BSM bootstrap uCode image OK
[   12.058721] ieee80211 phy0: il4965_load_bsm BSM write complete, poll 1 iterations
[   12.058734] ieee80211 phy0: __il4965_up iwl4965 is coming up
[   12.058737] ieee80211 phy0: il4965_mac_start Start UP work done.
[   12.058757] ieee80211 phy0: __il4965_down iwl4965 is going down
[   12.058761] ieee80211 phy0: il_scan_cancel_timeout Scan cancel timeout
[   12.058762] ieee80211 phy0: il_do_scan_abort Not performing scan to abort
[   12.058765] ieee80211 phy0: il_clear_ucode_stations Clearing ucode stations in driver
[   12.058767] ieee80211 phy0: il_clear_ucode_stations No active stations found to be cleared
[   12.058819] ieee80211 phy0: _il_apm_stop Stop card, put in low power state
[   12.058827] ieee80211 phy0: _il_apm_stop_master stop master
[   12.058864] ieee80211 phy0: il4965_clear_free_frames 0 frames on pre-allocated heap on clear.
[   12.058869] ieee80211 phy0: Hardware restart was requested
[   16.132299] iwl4965 0000:10:00.0: START_ALIVE timeout after 4000ms.
[   16.132303] ------------[ cut here ]------------
[   16.132304] Hardware became unavailable upon resume. This could be a software issue prior to suspend or a hardware issue.
[   16.132338] WARNING: CPU: 0 PID: 181 at net/mac80211/util.c:1826 ieee80211_reconfig+0x8f/0x14b0 [mac80211]
[   16.132390] Modules linked in: ctr ccm sch_fq_codel xt_tcpudp xt_multiport xt_state iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv4 ip_tables x_tables binfmt_misc joydev mousedev btusb btrtl btintel btbcm bluetooth ecdh_generic ecc iTCO_wdt i2c_dev iwl4965 iwlegacy coretemp snd_hda_codec_analog pcspkr psmouse mac80211 snd_hda_codec_generic libarc4 sdhci_pci cqhci sha256_generic sdhci libsha256 firewire_ohci snd_hda_intel snd_intel_dspcfg mmc_core snd_hda_codec snd_hwdep firewire_core led_class iosf_mbi snd_hda_core uhci_hcd lpc_ich crc_itu_t cfg80211 ehci_pci ehci_hcd snd_pcm usbcore mfd_core rfkill snd_timer snd usb_common soundcore video parport_pc parport intel_agp wmi intel_gtt backlight e1000e agpgart evdev
[   16.132456] CPU: 0 UID: 0 PID: 181 Comm: kworker/u8:6 Not tainted 6.11.0-cl+ #143
[   16.132460] Hardware name: Hewlett-Packard HP Compaq 6910p/30BE, BIOS 68MCU Ver. F.19 07/06/2010
[   16.132463] Workqueue: async async_run_entry_fn
[   16.132469] RIP: 0010:ieee80211_reconfig+0x8f/0x14b0 [mac80211]
[   16.132501] Code: da 02 00 00 c6 83 ad 05 00 00 00 48 89 df e8 98 1b fc ff 85 c0 41 89 c7 0f 84 e9 02 00 00 48 c7 c7 a0 e6 48 a0 e8 d1 77 c4 e0 &lt;0f&gt; 0b eb 2d 84 c0 0f 85 8b 01 00 00 c6 87 ad 05 00 00 00 e8 69 1b
[   16.132504] RSP: 0018:ffffc9000029fcf0 EFLAGS: 00010282
[   16.132507] RAX: 0000000000000000 RBX: ffff8880072008e0 RCX: 0000000000000001
[   16.132509] RDX: ffffffff81f21a18 RSI: 0000000000000086 RDI: 0000000000000001
[   16.132510] RBP: ffff8880072003c0 R08: 0000000000000000 R09: 0000000000000003
[   16.132512] R10: 0000000000000000 R11: ffff88807e5b0000 R12: 0000000000000001
[   16.132514] R13: 0000000000000000 R14: 0000000000000000 R15: 00000000ffffff92
[   16.132515] FS:  0000000000000000(0000) GS:ffff88807c200000(0000) knlGS:0000000000000000
[   16.132517] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   16.132519] CR2: 000055dd43786c08 CR3: 000000000978f000 CR4: 00000000000006f0
[   16.132521] Call Trace:
[   16.132525]  &lt;TASK&gt;
[   16.132526]  ? __warn+0x77/0x120
[   16.132532]  ? ieee80211_reconfig+0x8f/0x14b0 [mac80211]
[   16.132564]  ? report_bug+0x15c/0x190
[   16.132568]  ? handle_bug+0x36/0x70
[   16.132571]  ? exc_invalid_op+0x13/0x60
[   16.132573]  ? asm_exc_invalid_op+0x16/0x20
[   16.132579]  ? ieee80211_reconfig+0x8f/0x14b0 [mac80211]
[   16.132611]  ? snd_hdac_bus_init_cmd_io+0x24/0x200 [snd_hda_core]
[   16.132617]  ? pick_eevdf+0x133/0x1c0
[   16.132622]  ? check_preempt_wakeup_fair+0x70/0x90
[   16.132626]  ? wakeup_preempt+0x4a/0x60
[   16.132628]  ? ttwu_do_activate.isra.0+0x5a/0x190
[   16.132632]  wiphy_resume+0x79/0x1a0 [cfg80211]
[   16.132675]  ? wiphy_suspend+0x2a0/0x2a0 [cfg80211]
[   16.132697]  dpm_run_callback+0x75/0x1b0
[   16.132703]  device_resume+0x97/0x200
[   16.132707]  async_resume+0x14/0x20
[   16.132711]  async_run_entry_fn+0x1b/0xa0
[   16.132714]  process_one_work+0x13d/0x350
[   16.132718]  worker_thread+0x2be/0x3d0
[   16.132722]  ? cancel_delayed_work_sync+0x70/0x70
[   16.132725]  kthread+0xc0/0xf0
[   16.132729]  ? kthread_park+0x80/0x80
[   16.132732]  ret_from_fork+0x28/0x40
[   16.132735]  ? kthread_park+0x80/0x80
[   16.132738]  ret_from_fork_asm+0x11/0x20
[   16.132741]  &lt;/TASK&gt;
[   16.132742] ---[ end trace 0000000000000000 ]---
[   16.132930] ------------[ cut here ]------------
[   16.132932] WARNING: CPU: 0 PID: 181 at net/mac80211/driver-ops.c:41 drv_stop+0xe7/0xf0 [mac80211]
[   16.132957] Modules linked in: ctr ccm sch_fq_codel xt_tcpudp xt_multiport xt_state iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv4 ip_tables x_tables binfmt_misc joydev mousedev btusb btrtl btintel btbcm bluetooth ecdh_generic ecc iTCO_wdt i2c_dev iwl4965 iwlegacy coretemp snd_hda_codec_analog pcspkr psmouse mac80211 snd_hda_codec_generic libarc4 sdhci_pci cqhci sha256_generic sdhci libsha256 firewire_ohci snd_hda_intel snd_intel_dspcfg mmc_core snd_hda_codec snd_hwdep firewire_core led_class iosf_mbi snd_hda_core uhci_hcd lpc_ich crc_itu_t cfg80211 ehci_pci ehci_hcd snd_pcm usbcore mfd_core rfkill snd_timer snd usb_common soundcore video parport_pc parport intel_agp wmi intel_gtt backlight e1000e agpgart evdev
[   16.133014] CPU: 0 UID: 0 PID: 181 Comm: kworker/u8:6 Tainted: G        W          6.11.0-cl+ #143
[   16.133018] Tainted: [W]=WARN
[   16.133019] Hardware name: Hewlett-Packard HP Compaq 6910p/30BE, BIOS 68MCU Ver. F.19 07/06/2010
[   16.133021] Workqueue: async async_run_entry_fn
[   16.133025] RIP: 0010:drv_stop+0xe7/0xf0 [mac80211]
[   16.133048] Code: 48 85 c0 74 0e 48 8b 78 08 89 ea 48 89 de e8 e0 87 04 00 65 ff 0d d1 de c4 5f 0f 85 42 ff ff ff e8 be 52 c2 e0 e9 38 ff ff ff &lt;0f&gt; 0b 5b 5d c3 0f 1f 40 00 41 54 49 89 fc 55 53 48 89 f3 2e 2e 2e
[   16.133050] RSP: 0018:ffffc9000029fc50 EFLAGS: 00010246
[   16.133053] RAX: 0000000000000000 RBX: ffff8880072008e0 RCX: ffff88800377f6c0
[   16.133054] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff8880072008e0
[   16.133056] RBP: 0000000000000000 R08: ffffffff81f238d8 R09: 0000000000000000
[   16.133058] R10: ffff8880080520f0 R11: 0000000000000000 R12: ffff888008051c60
[   16.133060] R13: ffff8880072008e0 R14: 0000000000000000 R15: ffff8880072011d8
[   16.133061] FS:  0000000000000000(0000) GS:ffff88807c200000(0000) knlGS:0000000000000000
[   16.133063] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   16.133065] CR2: 000055dd43786c08 CR3: 000000000978f000 CR4: 00000000000006f0
[   16.133067] Call Trace:
[   16.133069]  &lt;TASK&gt;
[   16.133070]  ? __warn+0x77/0x120
[   16.133075]  ? drv_stop+0xe7/0xf0 [mac80211]
[   16.133098]  ? report_bug+0x15c/0x190
[   16.133100]  ? handle_bug+0x36/0x70
[   16.133103]  ? exc_invalid_op+0x13/0x60
[   16.133105]  ? asm_exc_invalid_op+0x16/0x20
[   16.133109]  ? drv_stop+0xe7/0xf0 [mac80211]
[   16.133132]  ieee80211_do_stop+0x55a/0x810 [mac80211]
[   16.133161]  ? fq_codel_reset+0xa5/0xc0 [sch_fq_codel]
[   16.133164]  ieee80211_stop+0x4f/0x180 [mac80211]
[   16.133192]  __dev_close_many+0xa2/0x120
[   16.133195]  dev_close_many+0x90/0x150
[   16.133198]  dev_close+0x5d/0x80
[   16.133200]  cfg80211_shutdown_all_interfaces+0x40/0xe0 [cfg80211]
[   16.133223]  wiphy_resume+0xb2/0x1a0 [cfg80211]
[   16.133247]  ? wiphy_suspend+0x2a0/0x2a0 [cfg80211]
[   16.133269]  dpm_run_callback+0x75/0x1b0
[   16.133273]  device_resume+0x97/0x200
[   16.133277]  async_resume+0x14/0x20
[   16.133280]  async_run_entry_fn+0x1b/0xa0
[   16.133283]  process_one_work+0x13d/0x350
[   16.133287]  worker_thread+0x2be/0x3d0
[   16.133290]  ? cancel_delayed_work_sync+0x70/0x70
[   16.133294]  kthread+0xc0/0xf0
[   16.133296]  ? kthread_park+0x80/0x80
[   16.133299]  ret_from_fork+0x28/0x40
[   16.133302]  ? kthread_park+0x80/0x80
[   16.133304]  ret_from_fork_asm+0x11/0x20
[   16.133307]  &lt;/TASK&gt;
[   16.133308] ---[ end trace 0000000000000000 ]---
[   16.133335] ieee80211 phy0: PM: dpm_run_callback(): wiphy_resume [cfg80211] returns -110
[   16.133360] ieee80211 phy0: PM: failed to restore async: error -110

Cc: stable@vger.kernel.org
Cc: Stanislaw Gruszka &lt;stf_xl@wp.pl&gt;
Cc: Kalle Valo &lt;kvalo@kernel.org&gt;
Cc: linux-wireless@vger.kernel.org
Signed-off-by: Ville Syrjälä &lt;ville.syrjala@linux.intel.com&gt;
Acked-by: Stanislaw Gruszka &lt;stf_xl@wp.pl&gt;
Signed-off-by: Kalle Valo &lt;kvalo@kernel.org&gt;
Link: https://patch.msgid.link/20241001200745.8276-1-ville.syrjala@linux.intel.com
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
</feed>
