commit 07c90acb071b9954e1fecb1e4f4f13d12c544b34 upstream. iwl4965 fails upon resume from hibernation on my laptop. The reason seems to be a stale interrupt which isn't being cleared out before interrupts are enabled. We end up with a race beween the resume trying to bring things back up, and the restart work (queued form the interrupt handler) trying to bring things down. Eventually the whole thing blows up. Fix the problem by clearing out any stale interrupts before interrupts get enabled during resume. Here's a debug log of the indicent: [ 12.042589] ieee80211 phy0: il_isr ISR inta 0x00000080, enabled 0xaa00008b, fh 0x00000000 [ 12.042625] ieee80211 phy0: il4965_irq_tasklet inta 0x00000080, enabled 0x00000000, fh 0x00000000 [ 12.042651] iwl4965 0000:10:00.0: RF_KILL bit toggled to enable radio. [ 12.042653] iwl4965 0000:10:00.0: On demand firmware reload [ 12.042690] ieee80211 phy0: il4965_irq_tasklet End inta 0x00000000, enabled 0xaa00008b, fh 0x00000000, flags 0x00000282 [ 12.052207] ieee80211 phy0: il4965_mac_start enter [ 12.052212] ieee80211 phy0: il_prep_station Add STA to driver ID 31: ff:ff:ff:ff:ff:ff [ 12.052244] ieee80211 phy0: il4965_set_hw_ready hardware ready [ 12.052324] ieee80211 phy0: il_apm_init Init card's basic functions [ 12.052348] ieee80211 phy0: il_apm_init L1 Enabled; Disabling L0S [ 12.055727] ieee80211 phy0: il4965_load_bsm Begin load bsm [ 12.056140] ieee80211 phy0: il4965_verify_bsm Begin verify bsm [ 12.058642] ieee80211 phy0: il4965_verify_bsm BSM bootstrap uCode image OK [ 12.058721] ieee80211 phy0: il4965_load_bsm BSM write complete, poll 1 iterations [ 12.058734] ieee80211 phy0: __il4965_up iwl4965 is coming up [ 12.058737] ieee80211 phy0: il4965_mac_start Start UP work done. [ 12.058757] ieee80211 phy0: __il4965_down iwl4965 is going down [ 12.058761] ieee80211 phy0: il_scan_cancel_timeout Scan cancel timeout [ 12.058762] ieee80211 phy0: il_do_scan_abort Not performing scan to abort [ 12.058765] ieee80211 phy0: il_clear_ucode_stations Clearing ucode stations in driver [ 12.058767] ieee80211 phy0: il_clear_ucode_stations No active stations found to be cleared [ 12.058819] ieee80211 phy0: _il_apm_stop Stop card, put in low power state [ 12.058827] ieee80211 phy0: _il_apm_stop_master stop master [ 12.058864] ieee80211 phy0: il4965_clear_free_frames 0 frames on pre-allocated heap on clear. [ 12.058869] ieee80211 phy0: Hardware restart was requested [ 16.132299] iwl4965 0000:10:00.0: START_ALIVE timeout after 4000ms. [ 16.132303] ------------[ cut here ]------------ [ 16.132304] Hardware became unavailable upon resume. This could be a software issue prior to suspend or a hardware issue. [ 16.132338] WARNING: CPU: 0 PID: 181 at net/mac80211/util.c:1826 ieee80211_reconfig+0x8f/0x14b0 [mac80211] [ 16.132390] Modules linked in: ctr ccm sch_fq_codel xt_tcpudp xt_multiport xt_state iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv4 ip_tables x_tables binfmt_misc joydev mousedev btusb btrtl btintel btbcm bluetooth ecdh_generic ecc iTCO_wdt i2c_dev iwl4965 iwlegacy coretemp snd_hda_codec_analog pcspkr psmouse mac80211 snd_hda_codec_generic libarc4 sdhci_pci cqhci sha256_generic sdhci libsha256 firewire_ohci snd_hda_intel snd_intel_dspcfg mmc_core snd_hda_codec snd_hwdep firewire_core led_class iosf_mbi snd_hda_core uhci_hcd lpc_ich crc_itu_t cfg80211 ehci_pci ehci_hcd snd_pcm usbcore mfd_core rfkill snd_timer snd usb_common soundcore video parport_pc parport intel_agp wmi intel_gtt backlight e1000e agpgart evdev [ 16.132456] CPU: 0 UID: 0 PID: 181 Comm: kworker/u8:6 Not tainted 6.11.0-cl+ #143 [ 16.132460] Hardware name: Hewlett-Packard HP Compaq 6910p/30BE, BIOS 68MCU Ver. F.19 07/06/2010 [ 16.132463] Workqueue: async async_run_entry_fn [ 16.132469] RIP: 0010:ieee80211_reconfig+0x8f/0x14b0 [mac80211] [ 16.132501] Code: da 02 00 00 c6 83 ad 05 00 00 00 48 89 df e8 98 1b fc ff 85 c0 41 89 c7 0f 84 e9 02 00 00 48 c7 c7 a0 e6 48 a0 e8 d1 77 c4 e0 <0f> 0b eb 2d 84 c0 0f 85 8b 01 00 00 c6 87 ad 05 00 00 00 e8 69 1b [ 16.132504] RSP: 0018:ffffc9000029fcf0 EFLAGS: 00010282 [ 16.132507] RAX: 0000000000000000 RBX: ffff8880072008e0 RCX: 0000000000000001 [ 16.132509] RDX: ffffffff81f21a18 RSI: 0000000000000086 RDI: 0000000000000001 [ 16.132510] RBP: ffff8880072003c0 R08: 0000000000000000 R09: 0000000000000003 [ 16.132512] R10: 0000000000000000 R11: ffff88807e5b0000 R12: 0000000000000001 [ 16.132514] R13: 0000000000000000 R14: 0000000000000000 R15: 00000000ffffff92 [ 16.132515] FS: 0000000000000000(0000) GS:ffff88807c200000(0000) knlGS:0000000000000000 [ 16.132517] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 16.132519] CR2: 000055dd43786c08 CR3: 000000000978f000 CR4: 00000000000006f0 [ 16.132521] Call Trace: [ 16.132525] <TASK> [ 16.132526] ? __warn+0x77/0x120 [ 16.132532] ? ieee80211_reconfig+0x8f/0x14b0 [mac80211] [ 16.132564] ? report_bug+0x15c/0x190 [ 16.132568] ? handle_bug+0x36/0x70 [ 16.132571] ? exc_invalid_op+0x13/0x60 [ 16.132573] ? asm_exc_invalid_op+0x16/0x20 [ 16.132579] ? ieee80211_reconfig+0x8f/0x14b0 [mac80211] [ 16.132611] ? snd_hdac_bus_init_cmd_io+0x24/0x200 [snd_hda_core] [ 16.132617] ? pick_eevdf+0x133/0x1c0 [ 16.132622] ? check_preempt_wakeup_fair+0x70/0x90 [ 16.132626] ? wakeup_preempt+0x4a/0x60 [ 16.132628] ? ttwu_do_activate.isra.0+0x5a/0x190 [ 16.132632] wiphy_resume+0x79/0x1a0 [cfg80211] [ 16.132675] ? wiphy_suspend+0x2a0/0x2a0 [cfg80211] [ 16.132697] dpm_run_callback+0x75/0x1b0 [ 16.132703] device_resume+0x97/0x200 [ 16.132707] async_resume+0x14/0x20 [ 16.132711] async_run_entry_fn+0x1b/0xa0 [ 16.132714] process_one_work+0x13d/0x350 [ 16.132718] worker_thread+0x2be/0x3d0 [ 16.132722] ? cancel_delayed_work_sync+0x70/0x70 [ 16.132725] kthread+0xc0/0xf0 [ 16.132729] ? kthread_park+0x80/0x80 [ 16.132732] ret_from_fork+0x28/0x40 [ 16.132735] ? kthread_park+0x80/0x80 [ 16.132738] ret_from_fork_asm+0x11/0x20 [ 16.132741] </TASK> [ 16.132742] ---[ end trace 0000000000000000 ]--- [ 16.132930] ------------[ cut here ]------------ [ 16.132932] WARNING: CPU: 0 PID: 181 at net/mac80211/driver-ops.c:41 drv_stop+0xe7/0xf0 [mac80211] [ 16.132957] Modules linked in: ctr ccm sch_fq_codel xt_tcpudp xt_multiport xt_state iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv4 ip_tables x_tables binfmt_misc joydev mousedev btusb btrtl btintel btbcm bluetooth ecdh_generic ecc iTCO_wdt i2c_dev iwl4965 iwlegacy coretemp snd_hda_codec_analog pcspkr psmouse mac80211 snd_hda_codec_generic libarc4 sdhci_pci cqhci sha256_generic sdhci libsha256 firewire_ohci snd_hda_intel snd_intel_dspcfg mmc_core snd_hda_codec snd_hwdep firewire_core led_class iosf_mbi snd_hda_core uhci_hcd lpc_ich crc_itu_t cfg80211 ehci_pci ehci_hcd snd_pcm usbcore mfd_core rfkill snd_timer snd usb_common soundcore video parport_pc parport intel_agp wmi intel_gtt backlight e1000e agpgart evdev [ 16.133014] CPU: 0 UID: 0 PID: 181 Comm: kworker/u8:6 Tainted: G W 6.11.0-cl+ #143 [ 16.133018] Tainted: [W]=WARN [ 16.133019] Hardware name: Hewlett-Packard HP Compaq 6910p/30BE, BIOS 68MCU Ver. F.19 07/06/2010 [ 16.133021] Workqueue: async async_run_entry_fn [ 16.133025] RIP: 0010:drv_stop+0xe7/0xf0 [mac80211] [ 16.133048] Code: 48 85 c0 74 0e 48 8b 78 08 89 ea 48 89 de e8 e0 87 04 00 65 ff 0d d1 de c4 5f 0f 85 42 ff ff ff e8 be 52 c2 e0 e9 38 ff ff ff <0f> 0b 5b 5d c3 0f 1f 40 00 41 54 49 89 fc 55 53 48 89 f3 2e 2e 2e [ 16.133050] RSP: 0018:ffffc9000029fc50 EFLAGS: 00010246 [ 16.133053] RAX: 0000000000000000 RBX: ffff8880072008e0 RCX: ffff88800377f6c0 [ 16.133054] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff8880072008e0 [ 16.133056] RBP: 0000000000000000 R08: ffffffff81f238d8 R09: 0000000000000000 [ 16.133058] R10: ffff8880080520f0 R11: 0000000000000000 R12: ffff888008051c60 [ 16.133060] R13: ffff8880072008e0 R14: 0000000000000000 R15: ffff8880072011d8 [ 16.133061] FS: 0000000000000000(0000) GS:ffff88807c200000(0000) knlGS:0000000000000000 [ 16.133063] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 16.133065] CR2: 000055dd43786c08 CR3: 000000000978f000 CR4: 00000000000006f0 [ 16.133067] Call Trace: [ 16.133069] <TASK> [ 16.133070] ? __warn+0x77/0x120 [ 16.133075] ? drv_stop+0xe7/0xf0 [mac80211] [ 16.133098] ? report_bug+0x15c/0x190 [ 16.133100] ? handle_bug+0x36/0x70 [ 16.133103] ? exc_invalid_op+0x13/0x60 [ 16.133105] ? asm_exc_invalid_op+0x16/0x20 [ 16.133109] ? drv_stop+0xe7/0xf0 [mac80211] [ 16.133132] ieee80211_do_stop+0x55a/0x810 [mac80211] [ 16.133161] ? fq_codel_reset+0xa5/0xc0 [sch_fq_codel] [ 16.133164] ieee80211_stop+0x4f/0x180 [mac80211] [ 16.133192] __dev_close_many+0xa2/0x120 [ 16.133195] dev_close_many+0x90/0x150 [ 16.133198] dev_close+0x5d/0x80 [ 16.133200] cfg80211_shutdown_all_interfaces+0x40/0xe0 [cfg80211] [ 16.133223] wiphy_resume+0xb2/0x1a0 [cfg80211] [ 16.133247] ? wiphy_suspend+0x2a0/0x2a0 [cfg80211] [ 16.133269] dpm_run_callback+0x75/0x1b0 [ 16.133273] device_resume+0x97/0x200 [ 16.133277] async_resume+0x14/0x20 [ 16.133280] async_run_entry_fn+0x1b/0xa0 [ 16.133283] process_one_work+0x13d/0x350 [ 16.133287] worker_thread+0x2be/0x3d0 [ 16.133290] ? cancel_delayed_work_sync+0x70/0x70 [ 16.133294] kthread+0xc0/0xf0 [ 16.133296] ? kthread_park+0x80/0x80 [ 16.133299] ret_from_fork+0x28/0x40 [ 16.133302] ? kthread_park+0x80/0x80 [ 16.133304] ret_from_fork_asm+0x11/0x20 [ 16.133307] </TASK> [ 16.133308] ---[ end trace 0000000000000000 ]--- [ 16.133335] ieee80211 phy0: PM: dpm_run_callback(): wiphy_resume [cfg80211] returns -110 [ 16.133360] ieee80211 phy0: PM: failed to restore async: error -110 Cc: stable@vger.kernel.org Cc: Stanislaw Gruszka <stf_xl@wp.pl> Cc: Kalle Valo <kvalo@kernel.org> Cc: linux-wireless@vger.kernel.org Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241001200745.8276-1-ville.syrjala@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3a84454f5204718ca5b4ad2c1f0bf2031e2403d1 ] There is a WARNING in iwl_trans_wait_tx_queues_empty() (that was recently converted from just a message), that can be hit if we wait for TX queues to become empty after firmware died. Clearly, we can't expect anything from the firmware after it's declared dead. Don't call iwl_trans_wait_tx_queues_empty() in this case. While it could be a good idea to stop the flow earlier, the flush functions do some maintenance work that is not related to the firmware, so keep that part of the code running even when the firmware is not running. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240825191257.a7cbd794cee9.I44a739fbd4ffcc46b83844dd1c7b2eb0c7b270f6@changeid [edit commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 916a5d9c5354c426220a0a6533a5e8ea1287d6ea ] Driver creates also the WFA TPC element, consider that in the calculation. Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240825191257.e710ce446b7f.I2715c6742e9c3d160e2ba41bc4b35de370d2ce34@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3c6a0b1f0add72e7f522bc9145222b86d0a7712a ] In RFKILL we first set the RFKILL bit, then we abort scan (if one exists) by waiting for the notification from FW and notifying mac80211. And then we stop the device. But in case we have a scan ongoing in the period of time between rfkill on and before the device is stopped - we will not wait for the FW notification because of the iwl_mvm_is_radio_killed() condition, and then the scan_status and uid_status are misconfigured, (scan_status is cleared but uid_status not) and when the notification suddenly arrives (before stopping the device) we will get into the assert about scan_status and uid_status mismatch. Fix this by waiting for FW notif when rfkill is on but the device isn't disabled yet. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231004123422.c43b69aa2c77.Icc7b5efb47974d6f499156ff7510b786e177993b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4bb95f4535489ed830cf9b34b0a891e384d1aee4 ]
In case the firmware sends a notification that claims it has more data
than it has, we will read past that was allocated for the notification.
Remove the print of the buffer, we won't see it by default. If needed,
we can see the content with tracing.
This was reported by KFENCE.
Fixes: bdccdb854f2f ("iwlwifi: mvm: support MFUART dump in case of MFUART assert")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240513132416.ba82a01a559e.Ia91dd20f5e1ca1ad380b95e68aebf2794f553d9b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4a7aace2899711592327463c1a29ffee44fcc66e ]
We don't actually support >64 even for HE devices, so revert
back to 64. This fixes an issue where the session is refused
because the queue is configured differently from the actual
session later.
Fixes: 514c30696fbc ("iwlwifi: add support for IEEE802.11ax")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Liad Kaufman <liad.kaufman@intel.com>
Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240510170500.52f7b4cf83aa.If47e43adddf7fe250ed7f5571fbb35d8221c7c47@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a528ab1da324d078ec60283c34c17848580df24 ] Roee reported various hard-to-debug crashes with pings in EHT aggregation scenarios. Enabling KASAN showed that we access the BAID allocation out of bounds, and looking at the code a bit shows that since the reorder buffer entry (struct iwl_mvm_reorder_buf_entry) is 128 bytes if debug such as lockdep is enabled, then staring from an agg size 512 we overflow the size calculation, and allocate a much smaller structure than we should, causing slab corruption once we initialize this. Fix this by simply using u32 instead of u16. Reported-by: Roee Goldfiner <roee.h.goldfiner@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230620125813.f428c856030d.I2c2bb808e945adb71bc15f5b2bac2d8957ea90eb@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 3f649ab728cda8038259d8f14492fe400fbab911 upstream. Using uninitialized_var() is dangerous as it papers over real bugs[1] (or can in the future), and suppresses unrelated compiler warnings (e.g. "unused variable"). If the compiler thinks it is uninitialized, either simply initialize the variable or make compiler changes. In preparation for removing[2] the[3] macro[4], remove all remaining needless uses with the following script: git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \ xargs perl -pi -e \ 's/\buninitialized_var\(([^\)]+)\)/\1/g; s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;' drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid pathological white-space. No outstanding warnings were found building allmodconfig with GCC 9.3.0 for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64, alpha, and m68k. [1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/ [2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/ [3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/ [4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/ Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5 Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ef16799640865f937719f0771c93be5dca18adc6 ] A received TKIP key may be up to 32 bytes because it may contain MIC rx/tx keys too. These are not used by iwl and copying these over overflows the iwl_keyinfo.key field. Add a check to not copy more data to iwl_keyinfo.key then will fit. This fixes backtraces like this one: memcpy: detected field-spanning write (size 32) of single field "sta_cmd.key.key" at drivers/net/wireless/intel/iwlwifi/dvm/sta.c:1103 (size 16) WARNING: CPU: 1 PID: 946 at drivers/net/wireless/intel/iwlwifi/dvm/sta.c:1103 iwlagn_send_sta_key+0x375/0x390 [iwldvm] <snip> Hardware name: Dell Inc. Latitude E6430/0H3MT5, BIOS A21 05/08/2017 RIP: 0010:iwlagn_send_sta_key+0x375/0x390 [iwldvm] <snip> Call Trace: <TASK> iwl_set_dynamic_key+0x1f0/0x220 [iwldvm] iwlagn_mac_set_key+0x1e4/0x280 [iwldvm] drv_set_key+0xa4/0x1b0 [mac80211] ieee80211_key_enable_hw_accel+0xa8/0x2d0 [mac80211] ieee80211_key_replace+0x22d/0x8e0 [mac80211] <snip> Link: https://www.alionet.org/index.php?topic=1469.0 Link: https://lore.kernel.org/linux-wireless/20230218191056.never.374-kees@kernel.org/ Link: https://lore.kernel.org/linux-wireless/68760035-7f75-1b23-e355-bfb758a87d83@redhat.com/ Cc: Kees Cook <keescook@chromium.org> Suggested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 13513cec93ac9902d0b896976d8bab3758a9881c ]
Check the firmware response size for responses to the
memory read/write command in debugfs before using it.
Fixes: 2b55f43f8e47 ("iwlwifi: mvm: Add mem debugfs entry")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230417113648.0d56fcaf68ee.I70e9571f3ed7263929b04f8fabad23c9b999e4ea@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>