<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-stable.git/drivers/net/wireless/broadcom, branch v6.1.136</title>
<subtitle>Linux kernel stable tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/'/>
<entry>
<title>wifi: brcmfmac: keep power during suspend if board requires it</title>
<updated>2025-04-10T12:33:38+00:00</updated>
<author>
<name>Matthias Proske</name>
<email>email@matthias-proske.de</email>
</author>
<published>2025-02-12T18:59:35+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=499d26188afc8fbb420afcd95527bc9efd518e17'/>
<id>499d26188afc8fbb420afcd95527bc9efd518e17</id>
<content type='text'>
[ Upstream commit 8c3170628a9ce24a59647bd24f897e666af919b8 ]

After commit 92cadedd9d5f ("brcmfmac: Avoid keeping power to SDIO card
unless WOWL is used"), the wifi adapter by default is turned off on
suspend and then re-probed on resume.

This conflicts with some embedded boards that require to remain powered.
They will fail on resume with:

brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
ieee80211 phy1: brcmf_bus_started: failed: -110
ieee80211 phy1: brcmf_attach: dongle is not responding: err=-110
brcmfmac: brcmf_sdio_firmware_callback: brcmf_attach failed

This commit checks for the Device Tree property 'cap-power-off-cards'.
If this property is not set, it means that we do not have the capability
to power off and should therefore remain powered.

Signed-off-by: Matthias Proske &lt;email@matthias-proske.de&gt;
Acked-by: Arend van Spriel &lt;arend.vanspriel@broadcom.com&gt;
Link: https://patch.msgid.link/20250212185941.146958-2-email@matthias-proske.de
Signed-off-by: Johannes Berg &lt;johannes.berg@intel.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 8c3170628a9ce24a59647bd24f897e666af919b8 ]

After commit 92cadedd9d5f ("brcmfmac: Avoid keeping power to SDIO card
unless WOWL is used"), the wifi adapter by default is turned off on
suspend and then re-probed on resume.

This conflicts with some embedded boards that require to remain powered.
They will fail on resume with:

brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
ieee80211 phy1: brcmf_bus_started: failed: -110
ieee80211 phy1: brcmf_attach: dongle is not responding: err=-110
brcmfmac: brcmf_sdio_firmware_callback: brcmf_attach failed

This commit checks for the Device Tree property 'cap-power-off-cards'.
If this property is not set, it means that we do not have the capability
to power off and should therefore remain powered.

Signed-off-by: Matthias Proske &lt;email@matthias-proske.de&gt;
Acked-by: Arend van Spriel &lt;arend.vanspriel@broadcom.com&gt;
Link: https://patch.msgid.link/20250212185941.146958-2-email@matthias-proske.de
Signed-off-by: Johannes Berg &lt;johannes.berg@intel.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>wifi: brcmfmac: fix NULL pointer dereference in brcmf_txfinalize()</title>
<updated>2025-02-21T12:49:43+00:00</updated>
<author>
<name>Marcel Hamer</name>
<email>marcel.hamer@windriver.com</email>
</author>
<published>2025-01-16T13:22:40+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=4e51d6d093e763348916e69d06d87e0a5593661b'/>
<id>4e51d6d093e763348916e69d06d87e0a5593661b</id>
<content type='text'>
commit 68abd0c4ebf24cd499841a488b97a6873d5efabb upstream.

On removal of the device or unloading of the kernel module a potential NULL
pointer dereference occurs.

The following sequence deletes the interface:

  brcmf_detach()
    brcmf_remove_interface()
      brcmf_del_if()

Inside the brcmf_del_if() function the drvr-&gt;if2bss[ifidx] is updated to
BRCMF_BSSIDX_INVALID (-1) if the bsscfgidx matches.

After brcmf_remove_interface() call the brcmf_proto_detach() function is
called providing the following sequence:

  brcmf_detach()
    brcmf_proto_detach()
      brcmf_proto_msgbuf_detach()
        brcmf_flowring_detach()
          brcmf_msgbuf_delete_flowring()
            brcmf_msgbuf_remove_flowring()
              brcmf_flowring_delete()
                brcmf_get_ifp()
                brcmf_txfinalize()

Since brcmf_get_ip() can and actually will return NULL in this case the
call to brcmf_txfinalize() will result in a NULL pointer dereference inside
brcmf_txfinalize() when trying to update ifp-&gt;ndev-&gt;stats.tx_errors.

This will only happen if a flowring still has an skb.

Although the NULL pointer dereference has only been seen when trying to
update the tx statistic, all other uses of the ifp pointer have been
guarded as well with an early return if ifp is NULL.

Cc: stable@vger.kernel.org
Signed-off-by: Marcel Hamer &lt;marcel.hamer@windriver.com&gt;
Link: https://lore.kernel.org/all/b519e746-ddfd-421f-d897-7620d229e4b2@gmail.com/
Acked-by: Arend van Spriel  &lt;arend.vanspriel@broadcom.com&gt;
Signed-off-by: Kalle Valo &lt;kvalo@kernel.org&gt;
Link: https://patch.msgid.link/20250116132240.731039-1-marcel.hamer@windriver.com
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 68abd0c4ebf24cd499841a488b97a6873d5efabb upstream.

On removal of the device or unloading of the kernel module a potential NULL
pointer dereference occurs.

The following sequence deletes the interface:

  brcmf_detach()
    brcmf_remove_interface()
      brcmf_del_if()

Inside the brcmf_del_if() function the drvr-&gt;if2bss[ifidx] is updated to
BRCMF_BSSIDX_INVALID (-1) if the bsscfgidx matches.

After brcmf_remove_interface() call the brcmf_proto_detach() function is
called providing the following sequence:

  brcmf_detach()
    brcmf_proto_detach()
      brcmf_proto_msgbuf_detach()
        brcmf_flowring_detach()
          brcmf_msgbuf_delete_flowring()
            brcmf_msgbuf_remove_flowring()
              brcmf_flowring_delete()
                brcmf_get_ifp()
                brcmf_txfinalize()

Since brcmf_get_ip() can and actually will return NULL in this case the
call to brcmf_txfinalize() will result in a NULL pointer dereference inside
brcmf_txfinalize() when trying to update ifp-&gt;ndev-&gt;stats.tx_errors.

This will only happen if a flowring still has an skb.

Although the NULL pointer dereference has only been seen when trying to
update the tx statistic, all other uses of the ifp pointer have been
guarded as well with an early return if ifp is NULL.

Cc: stable@vger.kernel.org
Signed-off-by: Marcel Hamer &lt;marcel.hamer@windriver.com&gt;
Link: https://lore.kernel.org/all/b519e746-ddfd-421f-d897-7620d229e4b2@gmail.com/
Acked-by: Arend van Spriel  &lt;arend.vanspriel@broadcom.com&gt;
Signed-off-by: Kalle Valo &lt;kvalo@kernel.org&gt;
Link: https://patch.msgid.link/20250116132240.731039-1-marcel.hamer@windriver.com
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>wifi: brcmfmac: Check the return value of of_property_read_string_index()</title>
<updated>2025-02-21T12:49:32+00:00</updated>
<author>
<name>Stefan Dösinger</name>
<email>stefan@codeweavers.com</email>
</author>
<published>2025-01-06T17:09:58+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=af525a8b2ab85291617e79a5bb18bcdcb529e80c'/>
<id>af525a8b2ab85291617e79a5bb18bcdcb529e80c</id>
<content type='text'>
[ Upstream commit 082d9e263af8de68f0c34f67b251818205160f6e ]

Somewhen between 6.10 and 6.11 the driver started to crash on my
MacBookPro14,3. The property doesn't exist and 'tmp' remains
uninitialized, so we pass a random pointer to devm_kstrdup().

The crash I am getting looks like this:

BUG: unable to handle page fault for address: 00007f033c669379
PF: supervisor read access in kernel mode
PF: error_code(0x0001) - permissions violation
PGD 8000000101341067 P4D 8000000101341067 PUD 101340067 PMD 1013bb067 PTE 800000010aee9025
Oops: Oops: 0001 [#1] SMP PTI
CPU: 4 UID: 0 PID: 827 Comm: (udev-worker) Not tainted 6.11.8-gentoo #1
Hardware name: Apple Inc. MacBookPro14,3/Mac-551B86E5744E2388, BIOS 529.140.2.0.0 06/23/2024
RIP: 0010:strlen+0x4/0x30
Code: f7 75 ec 31 c0 c3 cc cc cc cc 48 89 f8 c3 cc cc cc cc 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa &lt;80&gt; 3f 00 74 14 48 89 f8 48 83 c0 01 80 38 00 75 f7 48 29 f8 c3 cc
RSP: 0018:ffffb4aac0683ad8 EFLAGS: 00010202
RAX: 00000000ffffffea RBX: 00007f033c669379 RCX: 0000000000000001
RDX: 0000000000000cc0 RSI: 00007f033c669379 RDI: 00007f033c669379
RBP: 00000000ffffffea R08: 0000000000000000 R09: 00000000c0ba916a
R10: ffffffffffffffff R11: ffffffffb61ea260 R12: ffff91f7815b50c8
R13: 0000000000000cc0 R14: ffff91fafefffe30 R15: ffffb4aac0683b30
FS:  00007f033ccbe8c0(0000) GS:ffff91faeed00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f033c669379 CR3: 0000000107b1e004 CR4: 00000000003706f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 &lt;TASK&gt;
 ? __die+0x23/0x70
 ? page_fault_oops+0x149/0x4c0
 ? raw_spin_rq_lock_nested+0xe/0x20
 ? sched_balance_newidle+0x22b/0x3c0
 ? update_load_avg+0x78/0x770
 ? exc_page_fault+0x6f/0x150
 ? asm_exc_page_fault+0x26/0x30
 ? __pfx_pci_conf1_write+0x10/0x10
 ? strlen+0x4/0x30
 devm_kstrdup+0x25/0x70
 brcmf_of_probe+0x273/0x350 [brcmfmac]

Signed-off-by: Stefan Dösinger &lt;stefan@codeweavers.com&gt;
Acked-by: Arend van Spriel &lt;arend.vanspriel@broadcom.com&gt;
Signed-off-by: Kalle Valo &lt;kvalo@kernel.org&gt;
Link: https://patch.msgid.link/20250106170958.3595-1-stefan@codeweavers.com
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 082d9e263af8de68f0c34f67b251818205160f6e ]

Somewhen between 6.10 and 6.11 the driver started to crash on my
MacBookPro14,3. The property doesn't exist and 'tmp' remains
uninitialized, so we pass a random pointer to devm_kstrdup().

The crash I am getting looks like this:

BUG: unable to handle page fault for address: 00007f033c669379
PF: supervisor read access in kernel mode
PF: error_code(0x0001) - permissions violation
PGD 8000000101341067 P4D 8000000101341067 PUD 101340067 PMD 1013bb067 PTE 800000010aee9025
Oops: Oops: 0001 [#1] SMP PTI
CPU: 4 UID: 0 PID: 827 Comm: (udev-worker) Not tainted 6.11.8-gentoo #1
Hardware name: Apple Inc. MacBookPro14,3/Mac-551B86E5744E2388, BIOS 529.140.2.0.0 06/23/2024
RIP: 0010:strlen+0x4/0x30
Code: f7 75 ec 31 c0 c3 cc cc cc cc 48 89 f8 c3 cc cc cc cc 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa &lt;80&gt; 3f 00 74 14 48 89 f8 48 83 c0 01 80 38 00 75 f7 48 29 f8 c3 cc
RSP: 0018:ffffb4aac0683ad8 EFLAGS: 00010202
RAX: 00000000ffffffea RBX: 00007f033c669379 RCX: 0000000000000001
RDX: 0000000000000cc0 RSI: 00007f033c669379 RDI: 00007f033c669379
RBP: 00000000ffffffea R08: 0000000000000000 R09: 00000000c0ba916a
R10: ffffffffffffffff R11: ffffffffb61ea260 R12: ffff91f7815b50c8
R13: 0000000000000cc0 R14: ffff91fafefffe30 R15: ffffb4aac0683b30
FS:  00007f033ccbe8c0(0000) GS:ffff91faeed00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f033c669379 CR3: 0000000107b1e004 CR4: 00000000003706f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 &lt;TASK&gt;
 ? __die+0x23/0x70
 ? page_fault_oops+0x149/0x4c0
 ? raw_spin_rq_lock_nested+0xe/0x20
 ? sched_balance_newidle+0x22b/0x3c0
 ? update_load_avg+0x78/0x770
 ? exc_page_fault+0x6f/0x150
 ? asm_exc_page_fault+0x26/0x30
 ? __pfx_pci_conf1_write+0x10/0x10
 ? strlen+0x4/0x30
 devm_kstrdup+0x25/0x70
 brcmf_of_probe+0x273/0x350 [brcmfmac]

Signed-off-by: Stefan Dösinger &lt;stefan@codeweavers.com&gt;
Acked-by: Arend van Spriel &lt;arend.vanspriel@broadcom.com&gt;
Signed-off-by: Kalle Valo &lt;kvalo@kernel.org&gt;
Link: https://patch.msgid.link/20250106170958.3595-1-stefan@codeweavers.com
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>wifi: brcmsmac: add gain range check to wlc_phy_iqcal_gainparams_nphy()</title>
<updated>2025-02-21T12:49:31+00:00</updated>
<author>
<name>Dmitry Antipov</name>
<email>dmantipov@yandex.ru</email>
</author>
<published>2024-12-10T07:04:41+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=ada9df08b3ef683507e75b92f522fb659260147f'/>
<id>ada9df08b3ef683507e75b92f522fb659260147f</id>
<content type='text'>
[ Upstream commit 3f4a0948c3524ae50f166dbc6572a3296b014e62 ]

In 'wlc_phy_iqcal_gainparams_nphy()', add gain range check to WARN()
instead of possible out-of-bounds 'tbl_iqcal_gainparams_nphy' access.
Compile tested only.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Signed-off-by: Dmitry Antipov &lt;dmantipov@yandex.ru&gt;
Acked-by: Arend van Spriel &lt;arend.vanspriel@broadcom.com&gt;
Signed-off-by: Kalle Valo &lt;kvalo@kernel.org&gt;
Link: https://patch.msgid.link/20241210070441.836362-1-dmantipov@yandex.ru
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 3f4a0948c3524ae50f166dbc6572a3296b014e62 ]

In 'wlc_phy_iqcal_gainparams_nphy()', add gain range check to WARN()
instead of possible out-of-bounds 'tbl_iqcal_gainparams_nphy' access.
Compile tested only.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Signed-off-by: Dmitry Antipov &lt;dmantipov@yandex.ru&gt;
Acked-by: Arend van Spriel &lt;arend.vanspriel@broadcom.com&gt;
Signed-off-by: Kalle Valo &lt;kvalo@kernel.org&gt;
Link: https://patch.msgid.link/20241210070441.836362-1-dmantipov@yandex.ru
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>wifi: brcmfmac: Fix oops due to NULL pointer dereference in brcmf_sdiod_sglist_rw()</title>
<updated>2024-12-14T18:54:44+00:00</updated>
<author>
<name>Norbert van Bolhuis</name>
<email>nvbolhuis@gmail.com</email>
</author>
<published>2024-11-07T13:28:13+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=67a25ea28f8ec1da8894f2f115d01d3becf67dc7'/>
<id>67a25ea28f8ec1da8894f2f115d01d3becf67dc7</id>
<content type='text'>
[ Upstream commit 857282b819cbaa0675aaab1e7542e2c0579f52d7 ]

This patch fixes a NULL pointer dereference bug in brcmfmac that occurs
when a high 'sd_sgentry_align' value applies (e.g. 512) and a lot of queued SKBs
are sent from the pkt queue.

The problem is the number of entries in the pre-allocated sgtable, it is
nents = max(rxglom_size, txglom_size) + max(rxglom_size, txglom_size) &gt;&gt; 4 + 1.
Given the default [rt]xglom_size=32 it's actually 35 which is too small.
Worst case, the pkt queue can end up with 64 SKBs. This occurs when a new SKB
is added for each original SKB if tailroom isn't enough to hold tail_pad.
At least one sg entry is needed for each SKB. So, eventually the "skb_queue_walk loop"
in brcmf_sdiod_sglist_rw may run out of sg entries. This makes sg_next return
NULL and this causes the oops.

The patch sets nents to max(rxglom_size, txglom_size) * 2 to be able handle
the worst-case.
Btw. this requires only 64-35=29 * 16 (or 20 if CONFIG_NEED_SG_DMA_LENGTH) = 464
additional bytes of memory.

Signed-off-by: Norbert van Bolhuis &lt;nvbolhuis@gmail.com&gt;
Signed-off-by: Kalle Valo &lt;kvalo@kernel.org&gt;
Link: https://patch.msgid.link/20241107132903.13513-1-nvbolhuis@gmail.com
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 857282b819cbaa0675aaab1e7542e2c0579f52d7 ]

This patch fixes a NULL pointer dereference bug in brcmfmac that occurs
when a high 'sd_sgentry_align' value applies (e.g. 512) and a lot of queued SKBs
are sent from the pkt queue.

The problem is the number of entries in the pre-allocated sgtable, it is
nents = max(rxglom_size, txglom_size) + max(rxglom_size, txglom_size) &gt;&gt; 4 + 1.
Given the default [rt]xglom_size=32 it's actually 35 which is too small.
Worst case, the pkt queue can end up with 64 SKBs. This occurs when a new SKB
is added for each original SKB if tailroom isn't enough to hold tail_pad.
At least one sg entry is needed for each SKB. So, eventually the "skb_queue_walk loop"
in brcmf_sdiod_sglist_rw may run out of sg entries. This makes sg_next return
NULL and this causes the oops.

The patch sets nents to max(rxglom_size, txglom_size) * 2 to be able handle
the worst-case.
Btw. this requires only 64-35=29 * 16 (or 20 if CONFIG_NEED_SG_DMA_LENGTH) = 464
additional bytes of memory.

Signed-off-by: Norbert van Bolhuis &lt;nvbolhuis@gmail.com&gt;
Signed-off-by: Kalle Valo &lt;kvalo@kernel.org&gt;
Link: https://patch.msgid.link/20241107132903.13513-1-nvbolhuis@gmail.com
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>wifi: brcmfmac: release 'root' node in all execution paths</title>
<updated>2024-12-14T18:54:01+00:00</updated>
<author>
<name>Javier Carrasco</name>
<email>javier.carrasco.cruz@gmail.com</email>
</author>
<published>2024-10-30T17:34:45+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=7e696b979061de3fc482b01b343d2d0fd1248900'/>
<id>7e696b979061de3fc482b01b343d2d0fd1248900</id>
<content type='text'>
commit 2e19a3b590ebf2e351fc9d0e7c323430e65b6b6d upstream.

The fixed patch introduced an additional condition to enter the scope
where the 'root' device_node is released (!settings-&gt;board_type,
currently 'err'), which avoid decrementing the refcount with a call to
of_node_put() if that second condition is not satisfied.

Move the call to of_node_put() to the point where 'root' is no longer
required to avoid leaking the resource if err is not zero.

Cc: stable@vger.kernel.org
Fixes: 7682de8b3351 ("wifi: brcmfmac: of: Fetch Apple properties")
Signed-off-by: Javier Carrasco &lt;javier.carrasco.cruz@gmail.com&gt;
Signed-off-by: Kalle Valo &lt;kvalo@kernel.org&gt;
Link: https://patch.msgid.link/20241030-brcmfmac-of-cleanup-v1-1-0b90eefb4279@gmail.com
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 2e19a3b590ebf2e351fc9d0e7c323430e65b6b6d upstream.

The fixed patch introduced an additional condition to enter the scope
where the 'root' device_node is released (!settings-&gt;board_type,
currently 'err'), which avoid decrementing the refcount with a call to
of_node_put() if that second condition is not satisfied.

Move the call to of_node_put() to the point where 'root' is no longer
required to avoid leaking the resource if err is not zero.

Cc: stable@vger.kernel.org
Fixes: 7682de8b3351 ("wifi: brcmfmac: of: Fetch Apple properties")
Signed-off-by: Javier Carrasco &lt;javier.carrasco.cruz@gmail.com&gt;
Signed-off-by: Kalle Valo &lt;kvalo@kernel.org&gt;
Link: https://patch.msgid.link/20241030-brcmfmac-of-cleanup-v1-1-0b90eefb4279@gmail.com
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>wifi: brcm80211: BRCM_TRACING should depend on TRACING</title>
<updated>2024-11-08T15:26:40+00:00</updated>
<author>
<name>Geert Uytterhoeven</name>
<email>geert@linux-m68k.org</email>
</author>
<published>2024-09-24T12:09:32+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=a419868e8e4a6d8e57d8c5753c0458c52a5a8589'/>
<id>a419868e8e4a6d8e57d8c5753c0458c52a5a8589</id>
<content type='text'>
[ Upstream commit b73b2069528f90ec49d5fa1010a759baa2c2be05 ]

When tracing is disabled, there is no point in asking the user about
enabling Broadcom wireless device tracing.

Fixes: f5c4f10852d42012 ("brcm80211: Allow trace support to be enabled separately from debug")
Signed-off-by: Geert Uytterhoeven &lt;geert@linux-m68k.org&gt;
Acked-by: Arend van Spriel &lt;arend.vanspriel@broadcom.com&gt;
Signed-off-by: Kalle Valo &lt;kvalo@kernel.org&gt;
Link: https://patch.msgid.link/81a29b15eaacc1ac1fb421bdace9ac0c3385f40f.1727179742.git.geert@linux-m68k.org
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit b73b2069528f90ec49d5fa1010a759baa2c2be05 ]

When tracing is disabled, there is no point in asking the user about
enabling Broadcom wireless device tracing.

Fixes: f5c4f10852d42012 ("brcm80211: Allow trace support to be enabled separately from debug")
Signed-off-by: Geert Uytterhoeven &lt;geert@linux-m68k.org&gt;
Acked-by: Arend van Spriel &lt;arend.vanspriel@broadcom.com&gt;
Signed-off-by: Kalle Valo &lt;kvalo@kernel.org&gt;
Link: https://patch.msgid.link/81a29b15eaacc1ac1fb421bdace9ac0c3385f40f.1727179742.git.geert@linux-m68k.org
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>wifi: brcmsmac: advertise MFP_CAPABLE to enable WPA3</title>
<updated>2024-09-12T09:10:20+00:00</updated>
<author>
<name>Arend van Spriel</name>
<email>arend.vanspriel@broadcom.com</email>
</author>
<published>2024-06-17T12:26:09+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=f67db18eff1bfa9d909967d24858dfa99f3dd5af'/>
<id>f67db18eff1bfa9d909967d24858dfa99f3dd5af</id>
<content type='text'>
[ Upstream commit dbb5265a5d7cca1cdba7736dba313ab7d07bc19d ]

After being asked about support for WPA3 for BCM43224 chipset it
was found that all it takes is setting the MFP_CAPABLE flag and
mac80211 will take care of all that is needed [1].

Link: https://lore.kernel.org/linux-wireless/20200526155909.5807-2-Larry.Finger@lwfinger.net/ [1]
Signed-off-by: Arend van Spriel &lt;arend.vanspriel@broadcom.com&gt;
Tested-by: Reijer Boekhoff &lt;reijerboekhoff@protonmail.com&gt;
Signed-off-by: Kalle Valo &lt;kvalo@kernel.org&gt;
Link: https://patch.msgid.link/20240617122609.349582-1-arend.vanspriel@broadcom.com
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit dbb5265a5d7cca1cdba7736dba313ab7d07bc19d ]

After being asked about support for WPA3 for BCM43224 chipset it
was found that all it takes is setting the MFP_CAPABLE flag and
mac80211 will take care of all that is needed [1].

Link: https://lore.kernel.org/linux-wireless/20200526155909.5807-2-Larry.Finger@lwfinger.net/ [1]
Signed-off-by: Arend van Spriel &lt;arend.vanspriel@broadcom.com&gt;
Tested-by: Reijer Boekhoff &lt;reijerboekhoff@protonmail.com&gt;
Signed-off-by: Kalle Valo &lt;kvalo@kernel.org&gt;
Link: https://patch.msgid.link/20240617122609.349582-1-arend.vanspriel@broadcom.com
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>wifi: brcmsmac: LCN PHY code is used for BCM4313 2G-only device</title>
<updated>2024-08-03T06:49:03+00:00</updated>
<author>
<name>Samasth Norway Ananda</name>
<email>samasth.norway.ananda@oracle.com</email>
</author>
<published>2024-05-09T23:10:37+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=0216644f28600ff2af2599c275e3594ff852b441'/>
<id>0216644f28600ff2af2599c275e3594ff852b441</id>
<content type='text'>
[ Upstream commit c636fa85feb450ca414a10010ed05361a73c93a6 ]

The band_idx variable in the function wlc_lcnphy_tx_iqlo_cal() will
never be set to 1 as BCM4313 is the only device for which the LCN PHY
code is used. This is a 2G-only device.

Fixes: 5b435de0d786 ("net: wireless: add brcm80211 drivers")
Signed-off-by: Samasth Norway Ananda &lt;samasth.norway.ananda@oracle.com&gt;
Acked-by: Arend van Spriel &lt;arend.vanspriel@broadcom.com&gt;
Signed-off-by: Kalle Valo &lt;kvalo@kernel.org&gt;
Link: https://msgid.link/20240509231037.2014109-1-samasth.norway.ananda@oracle.com
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit c636fa85feb450ca414a10010ed05361a73c93a6 ]

The band_idx variable in the function wlc_lcnphy_tx_iqlo_cal() will
never be set to 1 as BCM4313 is the only device for which the LCN PHY
code is used. This is a 2G-only device.

Fixes: 5b435de0d786 ("net: wireless: add brcm80211 drivers")
Signed-off-by: Samasth Norway Ananda &lt;samasth.norway.ananda@oracle.com&gt;
Acked-by: Arend van Spriel &lt;arend.vanspriel@broadcom.com&gt;
Signed-off-by: Kalle Valo &lt;kvalo@kernel.org&gt;
Link: https://msgid.link/20240509231037.2014109-1-samasth.norway.ananda@oracle.com
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>wifi: brcmfmac: pcie: handle randbuf allocation failure</title>
<updated>2024-06-12T09:03:07+00:00</updated>
<author>
<name>Duoming Zhou</name>
<email>duoming@zju.edu.cn</email>
</author>
<published>2024-03-06T14:04:37+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=0eb2c0528e232b3c32cde9d5e1c9f80ba2996e49'/>
<id>0eb2c0528e232b3c32cde9d5e1c9f80ba2996e49</id>
<content type='text'>
[ Upstream commit 316f790ebcf94bdf59f794b7cdea4068dc676d4c ]

The kzalloc() in brcmf_pcie_download_fw_nvram() will return null
if the physical memory has run out. As a result, if we use
get_random_bytes() to generate random bytes in the randbuf, the
null pointer dereference bug will happen.

In order to prevent allocation failure, this patch adds a separate
function using buffer on kernel stack to generate random bytes in
the randbuf, which could prevent the kernel stack from overflow.

Fixes: 91918ce88d9f ("wifi: brcmfmac: pcie: Provide a buffer of random bytes to the device")
Suggested-by: Arnd Bergmann &lt;arnd@arndb.de&gt;
Signed-off-by: Duoming Zhou &lt;duoming@zju.edu.cn&gt;
Signed-off-by: Kalle Valo &lt;kvalo@kernel.org&gt;
Link: https://msgid.link/20240306140437.18177-1-duoming@zju.edu.cn
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 316f790ebcf94bdf59f794b7cdea4068dc676d4c ]

The kzalloc() in brcmf_pcie_download_fw_nvram() will return null
if the physical memory has run out. As a result, if we use
get_random_bytes() to generate random bytes in the randbuf, the
null pointer dereference bug will happen.

In order to prevent allocation failure, this patch adds a separate
function using buffer on kernel stack to generate random bytes in
the randbuf, which could prevent the kernel stack from overflow.

Fixes: 91918ce88d9f ("wifi: brcmfmac: pcie: Provide a buffer of random bytes to the device")
Suggested-by: Arnd Bergmann &lt;arnd@arndb.de&gt;
Signed-off-by: Duoming Zhou &lt;duoming@zju.edu.cn&gt;
Signed-off-by: Kalle Valo &lt;kvalo@kernel.org&gt;
Link: https://msgid.link/20240306140437.18177-1-duoming@zju.edu.cn
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
</feed>
