linux-stable.git/drivers/net/wireless/broadcom, branch v5.8.2 Linux kernel stable tree brcmfmac: set state of hanger slot to FREE when flushing PSQ 2020-08-19T06:26:20+00:00 Wright Feng wright.feng@cypress.com 2020-06-24T09:16:07+00:00 b195c3db843437784ad5dfca940d978f4722e3f8 [ Upstream commit fcdd7a875def793c38d7369633af3eba6c7cf089 ] When USB or SDIO device got abnormal bus disconnection, host driver tried to clean up the skbs in PSQ and TXQ (The skb's pointer in hanger slot linked to PSQ and TSQ), so we should set the state of skb hanger slot to BRCMF_FWS_HANGER_ITEM_STATE_FREE before freeing skb. In brcmf_fws_bus_txq_cleanup it already sets BRCMF_FWS_HANGER_ITEM_STATE_FREE before freeing skb, therefore we add the same thing in brcmf_fws_psq_flush to avoid following warning message. [ 1580.012880] ------------ [ cut here ]------------ [ 1580.017550] WARNING: CPU: 3 PID: 3065 at drivers/net/wireless/broadcom/brcm80211/brcmutil/utils.c:49 brcmu_pkt_buf_free_skb+0x21/0x30 [brcmutil] [ 1580.184017] Call Trace: [ 1580.186514] brcmf_fws_cleanup+0x14e/0x190 [brcmfmac] [ 1580.191594] brcmf_fws_del_interface+0x70/0x90 [brcmfmac] [ 1580.197029] brcmf_proto_bcdc_del_if+0xe/0x10 [brcmfmac] [ 1580.202418] brcmf_remove_interface+0x69/0x190 [brcmfmac] [ 1580.207888] brcmf_detach+0x90/0xe0 [brcmfmac] [ 1580.212385] brcmf_usb_disconnect+0x76/0xb0 [brcmfmac] [ 1580.217557] usb_unbind_interface+0x72/0x260 [ 1580.221857] device_release_driver_internal+0x141/0x200 [ 1580.227152] device_release_driver+0x12/0x20 [ 1580.231460] bus_remove_device+0xfd/0x170 [ 1580.235504] device_del+0x1d9/0x300 [ 1580.239041] usb_disable_device+0x9e/0x270 [ 1580.243160] usb_disconnect+0x94/0x270 [ 1580.246980] hub_event+0x76d/0x13b0 [ 1580.250499] process_one_work+0x144/0x360 [ 1580.254564] worker_thread+0x4d/0x3c0 [ 1580.258247] kthread+0x109/0x140 [ 1580.261515] ? rescuer_thread+0x340/0x340 [ 1580.265543] ? kthread_park+0x60/0x60 [ 1580.269237] ? SyS_exit_group+0x14/0x20 [ 1580.273118] ret_from_fork+0x25/0x30 [ 1580.300446] ------------ [ cut here ]------------ Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200624091608.25154-2-wright.feng@cypress.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit fcdd7a875def793c38d7369633af3eba6c7cf089 ]

When USB or SDIO device got abnormal bus disconnection, host driver
tried to clean up the skbs in PSQ and TXQ (The skb's pointer in hanger
slot linked to PSQ and TSQ), so we should set the state of skb hanger slot
to BRCMF_FWS_HANGER_ITEM_STATE_FREE before freeing skb.
In brcmf_fws_bus_txq_cleanup it already sets
BRCMF_FWS_HANGER_ITEM_STATE_FREE before freeing skb, therefore we add the
same thing in brcmf_fws_psq_flush to avoid following warning message.

   [ 1580.012880] ------------   [ cut here ]------------
   [ 1580.017550] WARNING: CPU: 3 PID: 3065 at
drivers/net/wireless/broadcom/brcm80211/brcmutil/utils.c:49
brcmu_pkt_buf_free_skb+0x21/0x30 [brcmutil]
   [ 1580.184017] Call Trace:
   [ 1580.186514]  brcmf_fws_cleanup+0x14e/0x190 [brcmfmac]
   [ 1580.191594]  brcmf_fws_del_interface+0x70/0x90 [brcmfmac]
   [ 1580.197029]  brcmf_proto_bcdc_del_if+0xe/0x10 [brcmfmac]
   [ 1580.202418]  brcmf_remove_interface+0x69/0x190 [brcmfmac]
   [ 1580.207888]  brcmf_detach+0x90/0xe0 [brcmfmac]
   [ 1580.212385]  brcmf_usb_disconnect+0x76/0xb0 [brcmfmac]
   [ 1580.217557]  usb_unbind_interface+0x72/0x260
   [ 1580.221857]  device_release_driver_internal+0x141/0x200
   [ 1580.227152]  device_release_driver+0x12/0x20
   [ 1580.231460]  bus_remove_device+0xfd/0x170
   [ 1580.235504]  device_del+0x1d9/0x300
   [ 1580.239041]  usb_disable_device+0x9e/0x270
   [ 1580.243160]  usb_disconnect+0x94/0x270
   [ 1580.246980]  hub_event+0x76d/0x13b0
   [ 1580.250499]  process_one_work+0x144/0x360
   [ 1580.254564]  worker_thread+0x4d/0x3c0
   [ 1580.258247]  kthread+0x109/0x140
   [ 1580.261515]  ? rescuer_thread+0x340/0x340
   [ 1580.265543]  ? kthread_park+0x60/0x60
   [ 1580.269237]  ? SyS_exit_group+0x14/0x20
   [ 1580.273118]  ret_from_fork+0x25/0x30
   [ 1580.300446] ------------   [ cut here ]------------

Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Wright Feng <wright.feng@cypress.com>
Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200624091608.25154-2-wright.feng@cypress.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
brcmfmac: To fix Bss Info flag definition Bug 2020-08-19T06:26:20+00:00 Prasanna Kerekoppa prasanna.kerekoppa@cypress.com 2020-06-04T07:18:35+00:00 f41a2583e10bf371cb64c3af9269cff77653f32c [ Upstream commit fa3266541b13f390eb35bdbc38ff4a03368be004 ] Bss info flag definition need to be fixed from 0x2 to 0x4 This flag is for rssi info received on channel. All Firmware branches defined as 0x4 and this is bug in brcmfmac. Signed-off-by: Prasanna Kerekoppa <prasanna.kerekoppa@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200604071835.3842-6-wright.feng@cypress.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit fa3266541b13f390eb35bdbc38ff4a03368be004 ]

Bss info flag definition need to be fixed from 0x2 to 0x4
This flag is for rssi info received on channel.
All Firmware branches defined as 0x4 and this is bug in brcmfmac.

Signed-off-by: Prasanna Kerekoppa <prasanna.kerekoppa@cypress.com>
Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Wright Feng <wright.feng@cypress.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200604071835.3842-6-wright.feng@cypress.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
brcmfmac: keep SDIO watchdog running when console_interval is non-zero 2020-08-19T06:26:20+00:00 Wright Feng wright.feng@cypress.com 2020-06-04T07:18:33+00:00 38a031bbdfd36fbf5162517991d11ebdcf8e491a [ Upstream commit eccbf46b15bb3e35d004148f7c3a8fa8e9b26c1e ] brcmfmac host driver makes SDIO bus sleep and stops SDIO watchdog if no pending event or data. As a result, host driver does not poll firmware console buffer before buffer overflow, which leads to missing firmware logs. We should not stop SDIO watchdog if console_interval is non-zero in debug build. Signed-off-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200604071835.3842-4-wright.feng@cypress.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit eccbf46b15bb3e35d004148f7c3a8fa8e9b26c1e ]

brcmfmac host driver makes SDIO bus sleep and stops SDIO watchdog if no
pending event or data. As a result, host driver does not poll firmware
console buffer before buffer overflow, which leads to missing firmware
logs. We should not stop SDIO watchdog if console_interval is non-zero
in debug build.

Signed-off-by: Wright Feng <wright.feng@cypress.com>
Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200604071835.3842-4-wright.feng@cypress.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
treewide: replace '---help---' in Kconfig files with 'help' 2020-06-13T16:57:21+00:00 Masahiro Yamada masahiroy@kernel.org 2020-06-13T16:50:22+00:00 a7f7f6248d9740d710fd6bd190293fe5e16410ac Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> 
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.

This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.

There are a variety of indentation styles found.

  a) 4 spaces + '---help---'
  b) 7 spaces + '---help---'
  c) 8 spaces + '---help---'
  d) 1 space + 1 tab + '---help---'
  e) 1 tab + '---help---'    (correct indentation)
  f) 1 tab + 1 space + '---help---'
  g) 1 tab + 2 spaces + '---help---'

In order to convert all of them to 1 tab + 'help', I ran the
following commend:

  $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next 2020-06-03T23:27:18+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-06-03T23:27:18+00:00 cb8e59cc87201af93dfbb6c3dccc8fcad72a09c2 Pull networking updates from David Miller: 1) Allow setting bluetooth L2CAP modes via socket option, from Luiz Augusto von Dentz. 2) Add GSO partial support to igc, from Sasha Neftin. 3) Several cleanups and improvements to r8169 from Heiner Kallweit. 4) Add IF_OPER_TESTING link state and use it when ethtool triggers a device self-test. From Andrew Lunn. 5) Start moving away from custom driver versions, use the globally defined kernel version instead, from Leon Romanovsky. 6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin. 7) Allow hard IRQ deferral during NAPI, from Eric Dumazet. 8) Add sriov and vf support to hinic, from Luo bin. 9) Support Media Redundancy Protocol (MRP) in the bridging code, from Horatiu Vultur. 10) Support netmap in the nft_nat code, from Pablo Neira Ayuso. 11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina Dubroca. Also add ipv6 support for espintcp. 12) Lots of ReST conversions of the networking documentation, from Mauro Carvalho Chehab. 13) Support configuration of ethtool rxnfc flows in bcmgenet driver, from Doug Berger. 14) Allow to dump cgroup id and filter by it in inet_diag code, from Dmitry Yakunin. 15) Add infrastructure to export netlink attribute policies to userspace, from Johannes Berg. 16) Several optimizations to sch_fq scheduler, from Eric Dumazet. 17) Fallback to the default qdisc if qdisc init fails because otherwise a packet scheduler init failure will make a device inoperative. From Jesper Dangaard Brouer. 18) Several RISCV bpf jit optimizations, from Luke Nelson. 19) Correct the return type of the ->ndo_start_xmit() method in several drivers, it's netdev_tx_t but many drivers were using 'int'. From Yunjian Wang. 20) Add an ethtool interface for PHY master/slave config, from Oleksij Rempel. 21) Add BPF iterators, from Yonghang Song. 22) Add cable test infrastructure, including ethool interfaces, from Andrew Lunn. Marvell PHY driver is the first to support this facility. 23) Remove zero-length arrays all over, from Gustavo A. R. Silva. 24) Calculate and maintain an explicit frame size in XDP, from Jesper Dangaard Brouer. 25) Add CAP_BPF, from Alexei Starovoitov. 26) Support terse dumps in the packet scheduler, from Vlad Buslov. 27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei. 28) Add devm_register_netdev(), from Bartosz Golaszewski. 29) Minimize qdisc resets, from Cong Wang. 30) Get rid of kernel_getsockopt and kernel_setsockopt in order to eliminate set_fs/get_fs calls. From Christoph Hellwig. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits) selftests: net: ip_defrag: ignore EPERM net_failover: fixed rollback in net_failover_open() Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv" Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv" vmxnet3: allow rx flow hash ops only when rss is enabled hinic: add set_channels ethtool_ops support selftests/bpf: Add a default $(CXX) value tools/bpf: Don't use $(COMPILE.c) bpf, selftests: Use bpf_probe_read_kernel s390/bpf: Use bcr 0,%0 as tail call nop filler s390/bpf: Maintain 8-byte stack alignment selftests/bpf: Fix verifier test selftests/bpf: Fix sample_cnt shared between two threads bpf, selftests: Adapt cls_redirect to call csum_level helper bpf: Add csum_level helper for fixing up csum levels bpf: Fix up bpf_skb_adjust_room helper's skb csum setting sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf() crypto/chtls: IPv6 support for inline TLS Crypto/chcr: Fixes a coccinile check error Crypto/chcr: Fixes compilations warnings ... 
Pull networking updates from David Miller:

 1) Allow setting bluetooth L2CAP modes via socket option, from Luiz
    Augusto von Dentz.

 2) Add GSO partial support to igc, from Sasha Neftin.

 3) Several cleanups and improvements to r8169 from Heiner Kallweit.

 4) Add IF_OPER_TESTING link state and use it when ethtool triggers a
    device self-test. From Andrew Lunn.

 5) Start moving away from custom driver versions, use the globally
    defined kernel version instead, from Leon Romanovsky.

 6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin.

 7) Allow hard IRQ deferral during NAPI, from Eric Dumazet.

 8) Add sriov and vf support to hinic, from Luo bin.

 9) Support Media Redundancy Protocol (MRP) in the bridging code, from
    Horatiu Vultur.

10) Support netmap in the nft_nat code, from Pablo Neira Ayuso.

11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina
    Dubroca. Also add ipv6 support for espintcp.

12) Lots of ReST conversions of the networking documentation, from Mauro
    Carvalho Chehab.

13) Support configuration of ethtool rxnfc flows in bcmgenet driver,
    from Doug Berger.

14) Allow to dump cgroup id and filter by it in inet_diag code, from
    Dmitry Yakunin.

15) Add infrastructure to export netlink attribute policies to
    userspace, from Johannes Berg.

16) Several optimizations to sch_fq scheduler, from Eric Dumazet.

17) Fallback to the default qdisc if qdisc init fails because otherwise
    a packet scheduler init failure will make a device inoperative. From
    Jesper Dangaard Brouer.

18) Several RISCV bpf jit optimizations, from Luke Nelson.

19) Correct the return type of the ->ndo_start_xmit() method in several
    drivers, it's netdev_tx_t but many drivers were using
    'int'. From Yunjian Wang.

20) Add an ethtool interface for PHY master/slave config, from Oleksij
    Rempel.

21) Add BPF iterators, from Yonghang Song.

22) Add cable test infrastructure, including ethool interfaces, from
    Andrew Lunn. Marvell PHY driver is the first to support this
    facility.

23) Remove zero-length arrays all over, from Gustavo A. R. Silva.

24) Calculate and maintain an explicit frame size in XDP, from Jesper
    Dangaard Brouer.

25) Add CAP_BPF, from Alexei Starovoitov.

26) Support terse dumps in the packet scheduler, from Vlad Buslov.

27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei.

28) Add devm_register_netdev(), from Bartosz Golaszewski.

29) Minimize qdisc resets, from Cong Wang.

30) Get rid of kernel_getsockopt and kernel_setsockopt in order to
    eliminate set_fs/get_fs calls. From Christoph Hellwig.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits)
  selftests: net: ip_defrag: ignore EPERM
  net_failover: fixed rollback in net_failover_open()
  Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv"
  Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv"
  vmxnet3: allow rx flow hash ops only when rss is enabled
  hinic: add set_channels ethtool_ops support
  selftests/bpf: Add a default $(CXX) value
  tools/bpf: Don't use $(COMPILE.c)
  bpf, selftests: Use bpf_probe_read_kernel
  s390/bpf: Use bcr 0,%0 as tail call nop filler
  s390/bpf: Maintain 8-byte stack alignment
  selftests/bpf: Fix verifier test
  selftests/bpf: Fix sample_cnt shared between two threads
  bpf, selftests: Adapt cls_redirect to call csum_level helper
  bpf: Add csum_level helper for fixing up csum levels
  bpf: Fix up bpf_skb_adjust_room helper's skb csum setting
  sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf()
  crypto/chtls: IPv6 support for inline TLS
  Crypto/chcr: Fixes a coccinile check error
  Crypto/chcr: Fixes compilations warnings
  ...
brcmfmac: 43012 Update MES Watermark 2020-05-29T17:39:40+00:00 Double Lo double.lo@cypress.com 2020-05-29T03:49:38+00:00 113a57a400a2d4974448760464f6443d52a1e498 Set MES watermark size to 0x50 for 43012. It fixes SDIO bus hang issue when running at high throughput. Signed-off-by: Double Lo <double.lo@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200529034938.124533-6-chi-hsien.lin@cypress.com 
Set MES watermark size to 0x50 for 43012. It fixes SDIO bus hang issue
when running at high throughput.

Signed-off-by: Double Lo <double.lo@cypress.com>
Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200529034938.124533-6-chi-hsien.lin@cypress.com
brcmfmac: fix 43455 CRC error under SDIO 3.0 SDR104 mode 2020-05-29T17:39:39+00:00 Wright Feng wright.feng@cypress.com 2020-05-29T03:49:37+00:00 df18c257bd6a3fe1906a9c87bcb0bb30cf87ef64 This patch fixes 43455 CRC error while running throughput test with suspend/resume stress test. The continuous failure messages before system crash: brcmfmac: brcmf_sdiod_sglist_rw: CMD53 sg block read failed -84 brcmfmac: brcmf_sdio_rxglom: glom read of 25600 bytes failed: -5 brcmfmac: brcmf_sdio_rxfail: abort command, terminate frame brcmfmac: brcmf_sdiod_sglist_rw: CMD53 sg block read failed -84 brcmfmac: brcmf_sdio_rxglom: glom read of 24576 bytes failed: -5 brcmfmac: brcmf_sdio_rxfail: abort command, terminate frame Signed-off-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200529034938.124533-5-chi-hsien.lin@cypress.com 
This patch fixes 43455 CRC error while running throughput test with
suspend/resume stress test.

The continuous failure messages before system crash:
brcmfmac: brcmf_sdiod_sglist_rw: CMD53 sg block read failed -84
brcmfmac: brcmf_sdio_rxglom: glom read of 25600 bytes failed: -5
brcmfmac: brcmf_sdio_rxfail: abort command, terminate frame
brcmfmac: brcmf_sdiod_sglist_rw: CMD53 sg block read failed -84
brcmfmac: brcmf_sdio_rxglom: glom read of 24576 bytes failed: -5
brcmfmac: brcmf_sdio_rxfail: abort command, terminate frame

Signed-off-by: Wright Feng <wright.feng@cypress.com>
Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200529034938.124533-5-chi-hsien.lin@cypress.com
brcmfmac: set F2 blocksize and watermark for 4354/4356 SDIO 2020-05-29T17:39:38+00:00 Frank Kao frank.kao@cypress.com 2020-05-29T03:49:36+00:00 2bee41270f3bafe475dd2cfe28fcc3f1ed6ab6ee Set F2 blocksize to 256 bytes and watermark to 0x40 for 4354/4356 SDIO. Also enable and configure F1 MesBusyCtrl. It would resolve random driver crash issue. Signed-off-by: Frank Kao <frank.kao@cypress.com> Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200529034938.124533-4-chi-hsien.lin@cypress.com 
Set F2 blocksize to 256 bytes and watermark to 0x40 for 4354/4356 SDIO.
Also enable and configure F1 MesBusyCtrl. It would resolve random driver
crash issue.

Signed-off-by: Frank Kao <frank.kao@cypress.com>
Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200529034938.124533-4-chi-hsien.lin@cypress.com
brcmfmac: fix 4339 CRC error under SDIO 3.0 SDR104 mode 2020-05-29T17:39:36+00:00 Double Lo double.lo@cypress.com 2020-05-29T03:49:35+00:00 528158a8d4522bed5a35bb1a942638a79bca6acd This patch fixes 4339 CRC error while running Tput test with suspend/resume test script. The continuous failure messages before system crash: brcmfmac: brcmf_sdiod_sglist_rw: CMD53 sg block read failed -84 brcmfmac: brcmf_sdio_rxglom: glom read of 25600 bytes failed: -5 brcmfmac: brcmf_sdio_rxfail: abort command, terminate frame brcmfmac: brcmf_sdiod_sglist_rw: CMD53 sg block read failed -84 brcmfmac: brcmf_sdio_rxglom: glom read of 24576 bytes failed: -5 brcmfmac: brcmf_sdio_rxfail: abort command, terminate frame Signed-off-by: Double Lo <double.lo@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200529034938.124533-3-chi-hsien.lin@cypress.com 
This patch fixes 4339 CRC error while running Tput test with
suspend/resume test script.

The continuous failure messages before system crash:
brcmfmac: brcmf_sdiod_sglist_rw: CMD53 sg block read failed -84
brcmfmac: brcmf_sdio_rxglom: glom read of 25600 bytes failed: -5
brcmfmac: brcmf_sdio_rxfail: abort command, terminate frame
brcmfmac: brcmf_sdiod_sglist_rw: CMD53 sg block read failed -84
brcmfmac: brcmf_sdio_rxglom: glom read of 24576 bytes failed: -5
brcmfmac: brcmf_sdio_rxfail: abort command, terminate frame

Signed-off-by: Double Lo <double.lo@cypress.com>
Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200529034938.124533-3-chi-hsien.lin@cypress.com
brcmfmac: set F2 blocksize for 4373 2020-05-29T17:39:35+00:00 Wright Feng wright.feng@cypress.com 2020-05-29T03:49:34+00:00 2a7621ded321dfd70b5349bbfcd1af9e9df1f197 Set F2 blocksize to 256 bytes for 4373. It fixes DMA error while having UDP bi-directional traffic. Also use a defined F1 MesBusyCtrl value. Signed-off-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200529034938.124533-2-chi-hsien.lin@cypress.com 
Set F2 blocksize to 256 bytes for 4373. It fixes DMA error while having
UDP bi-directional traffic. Also use a defined F1 MesBusyCtrl value.

Signed-off-by: Wright Feng <wright.feng@cypress.com>
Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200529034938.124533-2-chi-hsien.lin@cypress.com