linux-stable.git/drivers/net/wireless/broadcom, branch v5.4.223

wifi: brcmfmac: fix use-after-free bug in brcmf_netdev_start_xmit()

2022-10-26T11:22:49+00:00

[ Upstream commit 3f42faf6db431e04bf942d2ebe3ae88975723478 ]

> ret = brcmf_proto_tx_queue_data(drvr, ifp->ifidx, skb);

may be schedule, and then complete before the line

> ndev->stats.tx_bytes += skb->len;

[   46.912801] ==================================================================
[   46.920552] BUG: KASAN: use-after-free in brcmf_netdev_start_xmit+0x718/0x8c8 [brcmfmac]
[   46.928673] Read of size 4 at addr ffffff803f5882e8 by task systemd-resolve/328
[   46.935991]
[   46.937514] CPU: 1 PID: 328 Comm: systemd-resolve Tainted: G           O      5.4.199-[REDACTED] #1
[   46.947255] Hardware name: [REDACTED]
[   46.954568] Call trace:
[   46.957037]  dump_backtrace+0x0/0x2b8
[   46.960719]  show_stack+0x24/0x30
[   46.964052]  dump_stack+0x128/0x194
[   46.967557]  print_address_description.isra.0+0x64/0x380
[   46.972877]  __kasan_report+0x1d4/0x240
[   46.976723]  kasan_report+0xc/0x18
[   46.980138]  __asan_report_load4_noabort+0x18/0x20
[   46.985027]  brcmf_netdev_start_xmit+0x718/0x8c8 [brcmfmac]
[   46.990613]  dev_hard_start_xmit+0x1bc/0xda0
[   46.994894]  sch_direct_xmit+0x198/0xd08
[   46.998827]  __qdisc_run+0x37c/0x1dc0
[   47.002500]  __dev_queue_xmit+0x1528/0x21f8
[   47.006692]  dev_queue_xmit+0x24/0x30
[   47.010366]  neigh_resolve_output+0x37c/0x678
[   47.014734]  ip_finish_output2+0x598/0x2458
[   47.018927]  __ip_finish_output+0x300/0x730
[   47.023118]  ip_output+0x2e0/0x430
[   47.026530]  ip_local_out+0x90/0x140
[   47.030117]  igmpv3_sendpack+0x14c/0x228
[   47.034049]  igmpv3_send_cr+0x384/0x6b8
[   47.037895]  igmp_ifc_timer_expire+0x4c/0x118
[   47.042262]  call_timer_fn+0x1cc/0xbe8
[   47.046021]  __run_timers+0x4d8/0xb28
[   47.049693]  run_timer_softirq+0x24/0x40
[   47.053626]  __do_softirq+0x2c0/0x117c
[   47.057387]  irq_exit+0x2dc/0x388
[   47.060715]  __handle_domain_irq+0xb4/0x158
[   47.064908]  gic_handle_irq+0x58/0xb0
[   47.068581]  el0_irq_naked+0x50/0x5c
[   47.072162]
[   47.073665] Allocated by task 328:
[   47.077083]  save_stack+0x24/0xb0
[   47.080410]  __kasan_kmalloc.isra.0+0xc0/0xe0
[   47.084776]  kasan_slab_alloc+0x14/0x20
[   47.088622]  kmem_cache_alloc+0x15c/0x468
[   47.092643]  __alloc_skb+0xa4/0x498
[   47.096142]  igmpv3_newpack+0x158/0xd78
[   47.099987]  add_grhead+0x210/0x288
[   47.103485]  add_grec+0x6b0/0xb70
[   47.106811]  igmpv3_send_cr+0x2e0/0x6b8
[   47.110657]  igmp_ifc_timer_expire+0x4c/0x118
[   47.115027]  call_timer_fn+0x1cc/0xbe8
[   47.118785]  __run_timers+0x4d8/0xb28
[   47.122457]  run_timer_softirq+0x24/0x40
[   47.126389]  __do_softirq+0x2c0/0x117c
[   47.130142]
[   47.131643] Freed by task 180:
[   47.134712]  save_stack+0x24/0xb0
[   47.138041]  __kasan_slab_free+0x108/0x180
[   47.142146]  kasan_slab_free+0x10/0x18
[   47.145904]  slab_free_freelist_hook+0xa4/0x1b0
[   47.150444]  kmem_cache_free+0x8c/0x528
[   47.154292]  kfree_skbmem+0x94/0x108
[   47.157880]  consume_skb+0x10c/0x5a8
[   47.161466]  __dev_kfree_skb_any+0x88/0xa0
[   47.165598]  brcmu_pkt_buf_free_skb+0x44/0x68 [brcmutil]
[   47.171023]  brcmf_txfinalize+0xec/0x190 [brcmfmac]
[   47.176016]  brcmf_proto_bcdc_txcomplete+0x1c0/0x210 [brcmfmac]
[   47.182056]  brcmf_sdio_sendfromq+0x8dc/0x1e80 [brcmfmac]
[   47.187568]  brcmf_sdio_dpc+0xb48/0x2108 [brcmfmac]
[   47.192529]  brcmf_sdio_dataworker+0xc8/0x238 [brcmfmac]
[   47.197859]  process_one_work+0x7fc/0x1a80
[   47.201965]  worker_thread+0x31c/0xc40
[   47.205726]  kthread+0x2d8/0x370
[   47.208967]  ret_from_fork+0x10/0x18
[   47.212546]
[   47.214051] The buggy address belongs to the object at ffffff803f588280
[   47.214051]  which belongs to the cache skbuff_head_cache of size 208
[   47.227086] The buggy address is located 104 bytes inside of
[   47.227086]  208-byte region [ffffff803f588280, ffffff803f588350)
[   47.238814] The buggy address belongs to the page:
[   47.243618] page:ffffffff00dd6200 refcount:1 mapcount:0 mapping:ffffff804b6bf800 index:0xffffff803f589900 compound_mapcount: 0
[   47.255007] flags: 0x10200(slab|head)
[   47.258689] raw: 0000000000010200 ffffffff00dfa980 0000000200000002 ffffff804b6bf800
[   47.266439] raw: ffffff803f589900 0000000080190018 00000001ffffffff 0000000000000000
[   47.274180] page dumped because: kasan: bad access detected
[   47.279752]
[   47.281251] Memory state around the buggy address:
[   47.286051]  ffffff803f588180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[   47.293277]  ffffff803f588200: fb fb fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   47.300502] >ffffff803f588280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[   47.307723]                                                           ^
[   47.314343]  ffffff803f588300: fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc fc
[   47.321569]  ffffff803f588380: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
[   47.328789] ==================================================================

Signed-off-by: Alexander Coffin 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/20220808174925.3922558-1-alex.coffin@matician.com
Signed-off-by: Sasha Levin

wifi: brcmfmac: fix invalid address access when enabling SCAN log level

2022-10-26T11:22:48+00:00

[ Upstream commit aa666b68e73fc06d83c070d96180b9010cf5a960 ]

The variable i is changed when setting random MAC address and causes
invalid address access when printing the value of pi->reqs[i]->reqid.

We replace reqs index with ri to fix the issue.

[  136.726473] Unable to handle kernel access to user memory outside uaccess routines at virtual address 0000000000000000
[  136.737365] Mem abort info:
[  136.740172]   ESR = 0x96000004
[  136.743359]   Exception class = DABT (current EL), IL = 32 bits
[  136.749294]   SET = 0, FnV = 0
[  136.752481]   EA = 0, S1PTW = 0
[  136.755635] Data abort info:
[  136.758514]   ISV = 0, ISS = 0x00000004
[  136.762487]   CM = 0, WnR = 0
[  136.765522] user pgtable: 4k pages, 48-bit VAs, pgdp = 000000005c4e2577
[  136.772265] [0000000000000000] pgd=0000000000000000
[  136.777160] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[  136.782732] Modules linked in: brcmfmac(O) brcmutil(O) cfg80211(O) compat(O)
[  136.789788] Process wificond (pid: 3175, stack limit = 0x00000000053048fb)
[  136.796664] CPU: 3 PID: 3175 Comm: wificond Tainted: G           O      4.19.42-00001-g531a5f5 #1
[  136.805532] Hardware name: Freescale i.MX8MQ EVK (DT)
[  136.810584] pstate: 60400005 (nZCv daif +PAN -UAO)
[  136.815429] pc : brcmf_pno_config_sched_scans+0x6cc/0xa80 [brcmfmac]
[  136.821811] lr : brcmf_pno_config_sched_scans+0x67c/0xa80 [brcmfmac]
[  136.828162] sp : ffff00000e9a3880
[  136.831475] x29: ffff00000e9a3890 x28: ffff800020543400
[  136.836786] x27: ffff8000b1008880 x26: ffff0000012bf6a0
[  136.842098] x25: ffff80002054345c x24: ffff800088d22400
[  136.847409] x23: ffff0000012bf638 x22: ffff0000012bf6d8
[  136.852721] x21: ffff8000aced8fc0 x20: ffff8000ac164400
[  136.858032] x19: ffff00000e9a3946 x18: 0000000000000000
[  136.863343] x17: 0000000000000000 x16: 0000000000000000
[  136.868655] x15: ffff0000093f3b37 x14: 0000000000000050
[  136.873966] x13: 0000000000003135 x12: 0000000000000000
[  136.879277] x11: 0000000000000000 x10: ffff000009a61888
[  136.884589] x9 : 000000000000000f x8 : 0000000000000008
[  136.889900] x7 : 303a32303d726464 x6 : ffff00000a1f957d
[  136.895211] x5 : 0000000000000000 x4 : ffff00000e9a3942
[  136.900523] x3 : 0000000000000000 x2 : ffff0000012cead8
[  136.905834] x1 : ffff0000012bf6d8 x0 : 0000000000000000
[  136.911146] Call trace:
[  136.913623]  brcmf_pno_config_sched_scans+0x6cc/0xa80 [brcmfmac]
[  136.919658]  brcmf_pno_start_sched_scan+0xa4/0x118 [brcmfmac]
[  136.925430]  brcmf_cfg80211_sched_scan_start+0x80/0xe0 [brcmfmac]
[  136.931636]  nl80211_start_sched_scan+0x140/0x308 [cfg80211]
[  136.937298]  genl_rcv_msg+0x358/0x3f4
[  136.940960]  netlink_rcv_skb+0xb4/0x118
[  136.944795]  genl_rcv+0x34/0x48
[  136.947935]  netlink_unicast+0x264/0x300
[  136.951856]  netlink_sendmsg+0x2e4/0x33c
[  136.955781]  __sys_sendto+0x120/0x19c

Signed-off-by: Wright Feng 
Signed-off-by: Chi-hsien Lin 
Signed-off-by: Ahmad Fatoum 
Signed-off-by: Alvin Šipraga 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/20220722115632.620681-4-alvin@pqrs.dk
Signed-off-by: Sasha Levin

b43: Fix assigning negative value to unsigned variable

2022-06-14T16:11:25+00:00

[ Upstream commit 11800d893b38e0e12d636c170c1abc19c43c730c ]

fix warning reported by smatch:
drivers/net/wireless/broadcom/b43/phy_n.c:585 b43_nphy_adjust_lna_gain_table()
warn: assigning (-2) to unsigned variable '*(lna_gain[0])'

Signed-off-by: Haowen Bai 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/1648203315-28093-1-git-send-email-baihaowen@meizu.com
Signed-off-by: Sasha Levin

b43legacy: Fix assigning negative value to unsigned variable

2022-06-14T16:11:25+00:00

[ Upstream commit 3f6b867559b3d43a7ce1b4799b755e812fc0d503 ]

fix warning reported by smatch:
drivers/net/wireless/broadcom/b43legacy/phy.c:1181 b43legacy_phy_lo_b_measure()
warn: assigning (-772) to unsigned variable 'fval'

Signed-off-by: Haowen Bai 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/1648203433-8736-1-git-send-email-baihaowen@meizu.com
Signed-off-by: Sasha Levin

brcmfmac: sdio: Fix undefined behavior due to shift overflowing the constant

2022-04-27T11:50:48+00:00

[ Upstream commit 6fb3a5868b2117611f41e421e10e6a8c2a13039a ]

Fix:

  drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c: In function ‘brcmf_sdio_drivestrengthinit’:
  drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:3798:2: error: case label does not reduce to an integer constant
    case SDIOD_DRVSTR_KEY(BRCM_CC_43143_CHIP_ID, 17):
    ^~~~
  drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:3809:2: error: case label does not reduce to an integer constant
    case SDIOD_DRVSTR_KEY(BRCM_CC_43362_CHIP_ID, 13):
    ^~~~

See https://lore.kernel.org/r/YkwQ6%2BtIH8GQpuct@zn.tnic for the gory
details as to why it triggers with older gccs only.

Signed-off-by: Borislav Petkov 
Cc: Arend van Spriel 
Cc: Franky Lin 
Cc: Hante Meuleman 
Cc: Kalle Valo 
Cc: "David S. Miller" 
Cc: Jakub Kicinski 
Cc: brcm80211-dev-list.pdl@broadcom.com
Cc: netdev@vger.kernel.org
Acked-by: Arend van Spriel 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/Ykx0iRlvtBnKqtbG@zn.tnic
Signed-off-by: Sasha Levin

brcmfmac: pcie: Fix crashes due to early IRQs

2022-04-15T12:18:03+00:00

commit b50255c83b914defd61a57fbc81d452334b63f4c upstream.

The driver was enabling IRQs before the message processing was
initialized. This could cause IRQs to come in too early and crash the
driver. Instead, move the IRQ enable and hostready to a bus preinit
function, at which point everything is properly initialized.

Fixes: 9e37f045d5e7 ("brcmfmac: Adding PCIe bus layer support.")
Reviewed-by: Linus Walleij 
Reviewed-by: Arend van Spriel 
Cc: stable@vger.kernel.org
Signed-off-by: Hector Martin 
Reviewed-by: Andy Shevchenko 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/20220131160713.245637-7-marcan@marcan.st
Signed-off-by: Greg Kroah-Hartman

brcmfmac: pcie: Replace brcmf_pcie_copy_mem_todev with memcpy_toio

2022-04-15T12:18:03+00:00

commit 9466987f246758eb7e9071ae58005253f631271e upstream.

The alignment check was wrong (e.g. & 4 instead of & 3), and the logic
was also inefficient if the length was not a multiple of 4, since it
would needlessly fall back to copying the entire buffer bytewise.

We already have a perfectly good memcpy_toio function, so just call that
instead of rolling our own copy logic here. brcmf_pcie_init_ringbuffers
was already using it anyway.

Fixes: 9e37f045d5e7 ("brcmfmac: Adding PCIe bus layer support.")
Reviewed-by: Linus Walleij 
Reviewed-by: Arend van Spriel 
Reviewed-by: Andy Shevchenko 
Cc: stable@vger.kernel.org
Signed-off-by: Hector Martin 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/20220131160713.245637-6-marcan@marcan.st
Signed-off-by: Greg Kroah-Hartman

brcmfmac: pcie: Release firmwares in the brcmf_pcie_setup error path

2022-04-15T12:18:03+00:00

commit 5e90f0f3ead014867dade7a22f93958119f5efab upstream.

This avoids leaking memory if brcmf_chip_get_raminfo fails. Note that
the CLM blob is released in the device remove path.

Fixes: 82f93cf46d60 ("brcmfmac: get chip's default RAM info during PCIe setup")
Reviewed-by: Linus Walleij 
Reviewed-by: Arend van Spriel 
Cc: stable@vger.kernel.org
Signed-off-by: Hector Martin 
Reviewed-by: Andy Shevchenko 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/20220131160713.245637-2-marcan@marcan.st
Signed-off-by: Greg Kroah-Hartman

brcmfmac: firmware: Allocate space for default boardrev in nvram

2022-04-15T12:18:03+00:00

commit d19d8e3ba256f81ea4a27209dbbd1f0a00ef1903 upstream.

If boardrev is missing from the NVRAM we add a default one, but this
might need more space in the output buffer than was allocated. Ensure
we have enough padding for this in the buffer.

Fixes: 46f2b38a91b0 ("brcmfmac: insert default boardrev in nvram data if missing")
Reviewed-by: Arend van Spriel 
Cc: stable@vger.kernel.org
Signed-off-by: Hector Martin 
Reviewed-by: Andy Shevchenko 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/20220131160713.245637-3-marcan@marcan.st
Signed-off-by: Greg Kroah-Hartman

b43: fix a lower bounds test

2021-11-17T08:48:37+00:00

[ Upstream commit 9b793db5fca44d01f72d3564a168171acf7c4076 ]

The problem is that "channel" is an unsigned int, when it's less 5 the
value of "channel - 5" is not a negative number as one would expect but
is very high positive value instead.

This means that "start" becomes a very high positive value.  The result
of that is that we never enter the "for (i = start; i <= end; i++) {"
loop.  Instead of storing the result from b43legacy_radio_aci_detect()
it just uses zero.

Fixes: ef1a628d83fc ("b43: Implement dynamic PHY API")
Signed-off-by: Dan Carpenter 
Acked-by: Michael Büsch 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/20211006073621.GE8404@kili
Signed-off-by: Sasha Levin