linux-stable.git/drivers/net/wireless/broadcom, branch v4.9.129 Linux kernel stable tree b43/leds: Ensure NUL-termination of LED name string 2018-09-05T07:20:09+00:00 Michael Buesch m@bues.ch 2018-07-31T19:14:04+00:00 4a92d74e4f311635d12c593b3ef2b66c460a843b commit 2aa650d1950fce94f696ebd7db30b8830c2c946f upstream. strncpy might not NUL-terminate the string, if the name equals the buffer size. Use strlcpy instead. Signed-off-by: Michael Buesch <m@bues.ch> Cc: stable@vger.kernel.org Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 2aa650d1950fce94f696ebd7db30b8830c2c946f upstream.

strncpy might not NUL-terminate the string, if the name equals the buffer size.
Use strlcpy instead.

Signed-off-by: Michael Buesch <m@bues.ch>
Cc: stable@vger.kernel.org
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
b43legacy/leds: Ensure NUL-termination of LED name string 2018-09-05T07:20:09+00:00 Michael Buesch m@bues.ch 2018-07-31T19:14:16+00:00 a8625b187d7e75af3962d0840e2595f1008ca52b commit 4d77a89e3924b12f4a5628b21237e57ab4703866 upstream. strncpy might not NUL-terminate the string, if the name equals the buffer size. Use strlcpy instead. Signed-off-by: Michael Buesch <m@bues.ch> Cc: stable@vger.kernel.org Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 4d77a89e3924b12f4a5628b21237e57ab4703866 upstream.

strncpy might not NUL-terminate the string, if the name equals the buffer size.
Use strlcpy instead.

Signed-off-by: Michael Buesch <m@bues.ch>
Cc: stable@vger.kernel.org
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
brcmfmac: stop watchdog before detach and free everything 2018-08-24T11:12:31+00:00 Michael Trimarchi michael@amarulasolutions.com 2018-05-30T09:06:34+00:00 89efc936f85d81ecb9e0ed225501a122fa6b9144 [ Upstream commit 373c83a801f15b1e3d02d855fad89112bd4ccbe0 ] Using built-in in kernel image without a firmware in filesystem or in the kernel image can lead to a kernel NULL pointer deference. Watchdog need to be stopped in brcmf_sdio_remove The system is going down NOW! [ 1348.110759] Unable to handle kernel NULL pointer dereference at virtual address 000002f8 Sent SIGTERM to all processes [ 1348.121412] Mem abort info: [ 1348.126962] ESR = 0x96000004 [ 1348.130023] Exception class = DABT (current EL), IL = 32 bits [ 1348.135948] SET = 0, FnV = 0 [ 1348.138997] EA = 0, S1PTW = 0 [ 1348.142154] Data abort info: [ 1348.145045] ISV = 0, ISS = 0x00000004 [ 1348.148884] CM = 0, WnR = 0 [ 1348.151861] user pgtable: 4k pages, 48-bit VAs, pgdp = (____ptrval____) [ 1348.158475] [00000000000002f8] pgd=0000000000000000 [ 1348.163364] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 1348.168927] Modules linked in: ipv6 [ 1348.172421] CPU: 3 PID: 1421 Comm: brcmf_wdog/mmc0 Not tainted 4.17.0-rc5-next-20180517 #18 [ 1348.180757] Hardware name: Amarula A64-Relic (DT) [ 1348.185455] pstate: 60000005 (nZCv daif -PAN -UAO) [ 1348.190251] pc : brcmf_sdiod_freezer_count+0x0/0x20 [ 1348.195124] lr : brcmf_sdio_watchdog_thread+0x64/0x290 [ 1348.200253] sp : ffff00000b85be30 [ 1348.203561] x29: ffff00000b85be30 x28: 0000000000000000 [ 1348.208868] x27: ffff00000b6cb918 x26: ffff80003b990638 [ 1348.214176] x25: ffff0000087b1a20 x24: ffff80003b94f800 [ 1348.219483] x23: ffff000008e620c8 x22: ffff000008f0b660 [ 1348.224790] x21: ffff000008c6a858 x20: 00000000fffffe00 [ 1348.230097] x19: ffff80003b94f800 x18: 0000000000000001 [ 1348.235404] x17: 0000ffffab2e8a74 x16: ffff0000080d7de8 [ 1348.240711] x15: 0000000000000000 x14: 0000000000000400 [ 1348.246018] x13: 0000000000000400 x12: 0000000000000001 [ 1348.251324] x11: 00000000000002c4 x10: 0000000000000a10 [ 1348.256631] x9 : ffff00000b85bc40 x8 : ffff80003be11870 [ 1348.261937] x7 : ffff80003dfc7308 x6 : 000000078ff08b55 [ 1348.267243] x5 : 00000139e1058400 x4 : 0000000000000000 [ 1348.272550] x3 : dead000000000100 x2 : 958f2788d6618100 [ 1348.277856] x1 : 00000000fffffe00 x0 : 0000000000000000 Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 373c83a801f15b1e3d02d855fad89112bd4ccbe0 ]

Using built-in in kernel image without a firmware in filesystem
or in the kernel image can lead to a kernel NULL pointer deference.
Watchdog need to be stopped in brcmf_sdio_remove

The system is going down NOW!
[ 1348.110759] Unable to handle kernel NULL pointer dereference at virtual address 000002f8
Sent SIGTERM to all processes
[ 1348.121412] Mem abort info:
[ 1348.126962]   ESR = 0x96000004
[ 1348.130023]   Exception class = DABT (current EL), IL = 32 bits
[ 1348.135948]   SET = 0, FnV = 0
[ 1348.138997]   EA = 0, S1PTW = 0
[ 1348.142154] Data abort info:
[ 1348.145045]   ISV = 0, ISS = 0x00000004
[ 1348.148884]   CM = 0, WnR = 0
[ 1348.151861] user pgtable: 4k pages, 48-bit VAs, pgdp = (____ptrval____)
[ 1348.158475] [00000000000002f8] pgd=0000000000000000
[ 1348.163364] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[ 1348.168927] Modules linked in: ipv6
[ 1348.172421] CPU: 3 PID: 1421 Comm: brcmf_wdog/mmc0 Not tainted 4.17.0-rc5-next-20180517 #18
[ 1348.180757] Hardware name: Amarula A64-Relic (DT)
[ 1348.185455] pstate: 60000005 (nZCv daif -PAN -UAO)
[ 1348.190251] pc : brcmf_sdiod_freezer_count+0x0/0x20
[ 1348.195124] lr : brcmf_sdio_watchdog_thread+0x64/0x290
[ 1348.200253] sp : ffff00000b85be30
[ 1348.203561] x29: ffff00000b85be30 x28: 0000000000000000
[ 1348.208868] x27: ffff00000b6cb918 x26: ffff80003b990638
[ 1348.214176] x25: ffff0000087b1a20 x24: ffff80003b94f800
[ 1348.219483] x23: ffff000008e620c8 x22: ffff000008f0b660
[ 1348.224790] x21: ffff000008c6a858 x20: 00000000fffffe00
[ 1348.230097] x19: ffff80003b94f800 x18: 0000000000000001
[ 1348.235404] x17: 0000ffffab2e8a74 x16: ffff0000080d7de8
[ 1348.240711] x15: 0000000000000000 x14: 0000000000000400
[ 1348.246018] x13: 0000000000000400 x12: 0000000000000001
[ 1348.251324] x11: 00000000000002c4 x10: 0000000000000a10
[ 1348.256631] x9 : ffff00000b85bc40 x8 : ffff80003be11870
[ 1348.261937] x7 : ffff80003dfc7308 x6 : 000000078ff08b55
[ 1348.267243] x5 : 00000139e1058400 x4 : 0000000000000000
[ 1348.272550] x3 : dead000000000100 x2 : 958f2788d6618100
[ 1348.277856] x1 : 00000000fffffe00 x0 : 0000000000000000

Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
brcmfmac: Add support for bcm43364 wireless chipset 2018-08-03T05:55:22+00:00 Sean Lanigan sean@lano.id.au 2018-05-04T06:48:23+00:00 4139a621020b96e805115f1d0c32d1ba3d142e67 [ Upstream commit 9c4a121e82634aa000a702c98cd6f05b27d6e186 ] Add support for the BCM43364 chipset via an SDIO interface, as used in e.g. the Murata 1FX module. The BCM43364 uses the same firmware as the BCM43430 (which is already included), the only difference is the omission of Bluetooth. However, the SDIO_ID for the BCM43364 is 02D0:A9A4, giving it a MODALIAS of sdio:c00v02D0dA9A4, which doesn't get recognised and hence doesn't load the brcmfmac module. Adding the 'A9A4' ID in the appropriate place triggers the brcmfmac driver to load, and then correctly use the firmware file 'brcmfmac43430-sdio.bin'. Signed-off-by: Sean Lanigan <sean@lano.id.au> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 9c4a121e82634aa000a702c98cd6f05b27d6e186 ]

Add support for the BCM43364 chipset via an SDIO interface, as used in
e.g. the Murata 1FX module.

The BCM43364 uses the same firmware as the BCM43430 (which is already
included), the only difference is the omission of Bluetooth.

However, the SDIO_ID for the BCM43364 is 02D0:A9A4, giving it a MODALIAS
of sdio:c00v02D0dA9A4, which doesn't get recognised and hence doesn't
load the brcmfmac module. Adding the 'A9A4' ID in the appropriate place
triggers the brcmfmac driver to load, and then correctly use the
firmware file 'brcmfmac43430-sdio.bin'.

Signed-off-by: Sean Lanigan <sean@lano.id.au>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
brcmfmac: Fix check for ISO3166 code 2018-05-30T05:50:37+00:00 Stefan Wahren stefan.wahren@i2se.com 2018-03-14T19:02:59+00:00 78e7409901054e87559f15724652b4d666bd7f8a [ Upstream commit 9b9322db5c5a1917a66c71fe47c3848a9a31227e ] The commit "regulatory: add NUL to request alpha2" increases the length of alpha2 to 3. This causes a regression on brcmfmac, because brcmf_cfg80211_reg_notifier() expect valid ISO3166 codes in the complete array. So fix this accordingly. Fixes: 657308f73e67 ("regulatory: add NUL to request alpha2") Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Acked-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 9b9322db5c5a1917a66c71fe47c3848a9a31227e ]

The commit "regulatory: add NUL to request alpha2" increases the length of
alpha2 to 3. This causes a regression on brcmfmac, because
brcmf_cfg80211_reg_notifier() expect valid ISO3166 codes in the complete
array. So fix this accordingly.

Fixes: 657308f73e67 ("regulatory: add NUL to request alpha2")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Acked-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
brcmfmac: fix P2P_DEVICE ethernet address generation 2018-03-28T16:39:22+00:00 Arend Van Spriel arend.vanspriel@broadcom.com 2018-02-28T20:15:20+00:00 0a9be1b13232aa76c5561513415029da4e513f75 commit 455f3e76cfc0d893585a5f358b9ddbe9c1e1e53b upstream. The firmware has a requirement that the P2P_DEVICE address should be different from the address of the primary interface. When not specified by user-space, the driver generates the MAC address for the P2P_DEVICE interface using the MAC address of the primary interface and setting the locally administered bit. However, the MAC address of the primary interface may already have that bit set causing the creation of the P2P_DEVICE interface to fail with -EBUSY. Fix this by using a random address instead to determine the P2P_DEVICE address. Cc: stable@vger.kernel.org # 3.10.y Reported-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 455f3e76cfc0d893585a5f358b9ddbe9c1e1e53b upstream.

The firmware has a requirement that the P2P_DEVICE address should
be different from the address of the primary interface. When not
specified by user-space, the driver generates the MAC address for
the P2P_DEVICE interface using the MAC address of the primary
interface and setting the locally administered bit. However, the MAC
address of the primary interface may already have that bit set causing
the creation of the P2P_DEVICE interface to fail with -EBUSY. Fix this
by using a random address instead to determine the P2P_DEVICE address.

Cc: stable@vger.kernel.org # 3.10.y
Reported-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
brcmfmac: Avoid build error with make W=1 2018-02-25T10:05:48+00:00 Andy Shevchenko andriy.shevchenko@linux.intel.com 2017-11-23T15:57:04+00:00 31d3d76094a1e07f21a89b4b30a41bae86c292e5 [ Upstream commit 51ef7925e10688c57186d438e784532e063492e4 ] When I run make W=1 on gcc (Debian 7.2.0-16) 7.2.0 I got an error for the first run, all next ones are okay. CC [M] drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.o drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:2078: error: Cannot parse struct or union! scripts/Makefile.build:310: recipe for target 'drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.o' failed Seems like something happened with W=1 and wrong kernel doc format. As a quick fix remove dubious /** in the code. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 51ef7925e10688c57186d438e784532e063492e4 ]

When I run make W=1 on gcc (Debian 7.2.0-16) 7.2.0 I got an error for
the first run, all next ones are okay.

  CC [M]  drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.o
drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:2078: error: Cannot parse struct or union!
scripts/Makefile.build:310: recipe for target 'drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.o' failed

Seems like something happened with W=1 and wrong kernel doc format.
As a quick fix remove dubious /** in the code.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
b43: Add missing MODULE_FIRMWARE() 2018-02-13T11:35:57+00:00 Takashi Iwai tiwai@suse.de 2017-05-04T09:27:52+00:00 0a01ecbd23a9547b60b1a1d7e83f60704b176925 commit 3c89a72ad80c64bdbd5ff851ee9c328a191f7e01 upstream. Some firmware entries were forgotten to be added via MODULE_FIRMWARE(), which may result in the non-functional state when the driver is loaded in initrd. Link: http://bugzilla.opensuse.org/show_bug.cgi?id=1037344 Fixes: 15be8e89cdd9 ("b43: add more bcma cores") Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 3c89a72ad80c64bdbd5ff851ee9c328a191f7e01 upstream.

Some firmware entries were forgotten to be added via MODULE_FIRMWARE(), which
may result in the non-functional state when the driver is loaded in initrd.

Link: http://bugzilla.opensuse.org/show_bug.cgi?id=1037344
Fixes: 15be8e89cdd9 ("b43: add more bcma cores")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
brcmfmac: change driver unbind order of the sdio function devices 2017-12-14T08:28:13+00:00 Arend Van Spriel arend.vanspriel@broadcom.com 2017-11-25T20:39:25+00:00 4a70f07da85313aa817c0888d2b623ea30cbbbe5 commit 5c3de777bdaf48bd0cfb43097c0d0fb85056cab7 upstream. In the function brcmf_sdio_firmware_callback() the driver is unbound from the sdio function devices in the error path. However, the order in which it is done resulted in a use-after-free issue (see brcmf_ops_sdio_remove() in bcmsdh.c). Hence change the order and first unbind sdio function #2 device and then unbind sdio function #1 device. Fixes: 7a51461fc2da ("brcmfmac: unbind all devices upon failure in firmware callback") Reported-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 5c3de777bdaf48bd0cfb43097c0d0fb85056cab7 upstream.

In the function brcmf_sdio_firmware_callback() the driver is
unbound from the sdio function devices in the error path.
However, the order in which it is done resulted in a use-after-free
issue (see brcmf_ops_sdio_remove() in bcmsdh.c). Hence change
the order and first unbind sdio function #2 device and then
unbind sdio function #1 device.

Fixes: 7a51461fc2da ("brcmfmac: unbind all devices upon failure in firmware callback")
Reported-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
brcmfmac: don't preset all channels as disabled 2017-11-21T08:23:30+00:00 Rafał Miłecki rafal@milecki.pl 2017-01-07T20:36:04+00:00 d8b5d88d219522877b0bed1b5114dddedf042d70 commit 9ea0c307609fd20e03f53546b9cefbb20b96785d upstream. During init we take care of regulatory stuff by disabling all unavailable channels (see brcmf_construct_chaninfo) so this predisabling them is not really required (and this patch won't change any behavior). It will on the other hand allow more detailed runtime control over channels which is the main reason for this change. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Cc: Lambdadroid <lambdadroid@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 9ea0c307609fd20e03f53546b9cefbb20b96785d upstream.

During init we take care of regulatory stuff by disabling all
unavailable channels (see brcmf_construct_chaninfo) so this predisabling
them is not really required (and this patch won't change any behavior).
It will on the other hand allow more detailed runtime control over
channels which is the main reason for this change.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Cc: Lambdadroid <lambdadroid@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>