linux-stable.git/drivers/net/wireless/broadcom, branch linux-5.4.y Linux kernel stable tree wifi: brcmfmac: fix crash while sending Action Frames in standalone AP Mode 2025-12-03T11:45:05+00:00 Gokul Sivakumar gokulkumar.sivakumar@infineon.com 2025-11-02T15:19:27+00:00 c863b9c7b4e9af0b7931cb791ec91971a50f1a25 [ Upstream commit 3776c685ebe5f43e9060af06872661de55e80b9a ] Currently, whenever there is a need to transmit an Action frame, the brcmfmac driver always uses the P2P vif to send the "actframe" IOVAR to firmware. The P2P interfaces were available when wpa_supplicant is managing the wlan interface. However, the P2P interfaces are not created/initialized when only hostapd is managing the wlan interface. And if hostapd receives an ANQP Query REQ Action frame even from an un-associated STA, the brcmfmac driver tries to use an uninitialized P2P vif pointer for sending the IOVAR to firmware. This NULL pointer dereferencing triggers a driver crash. [ 1417.074538] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [...] [ 1417.075188] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [...] [ 1417.075653] Call trace: [ 1417.075662] brcmf_p2p_send_action_frame+0x23c/0xc58 [brcmfmac] [ 1417.075738] brcmf_cfg80211_mgmt_tx+0x304/0x5c0 [brcmfmac] [ 1417.075810] cfg80211_mlme_mgmt_tx+0x1b0/0x428 [cfg80211] [ 1417.076067] nl80211_tx_mgmt+0x238/0x388 [cfg80211] [ 1417.076281] genl_family_rcv_msg_doit+0xe0/0x158 [ 1417.076302] genl_rcv_msg+0x220/0x2a0 [ 1417.076317] netlink_rcv_skb+0x68/0x140 [ 1417.076330] genl_rcv+0x40/0x60 [ 1417.076343] netlink_unicast+0x330/0x3b8 [ 1417.076357] netlink_sendmsg+0x19c/0x3f8 [ 1417.076370] __sock_sendmsg+0x64/0xc0 [ 1417.076391] ____sys_sendmsg+0x268/0x2a0 [ 1417.076408] ___sys_sendmsg+0xb8/0x118 [ 1417.076427] __sys_sendmsg+0x90/0xf8 [ 1417.076445] __arm64_sys_sendmsg+0x2c/0x40 [ 1417.076465] invoke_syscall+0x50/0x120 [ 1417.076486] el0_svc_common.constprop.0+0x48/0xf0 [ 1417.076506] do_el0_svc+0x24/0x38 [ 1417.076525] el0_svc+0x30/0x100 [ 1417.076548] el0t_64_sync_handler+0x100/0x130 [ 1417.076569] el0t_64_sync+0x190/0x198 [ 1417.076589] Code: f9401e80 aa1603e2 f9403be1 5280e483 (f9400000) Fix this, by always using the vif corresponding to the wdev on which the Action frame Transmission request was initiated by the userspace. This way, even if P2P vif is not available, the IOVAR is sent to firmware on AP vif and the ANQP Query RESP Action frame is transmitted without crashing the driver. Move init_completion() for "send_af_done" from brcmf_p2p_create_p2pdev() to brcmf_p2p_attach(). Because the former function would not get executed when only hostapd is managing wlan interface, and it is not safe to do reinit_completion() later in brcmf_p2p_tx_action_frame(), without any prior init_completion(). And in the brcmf_p2p_tx_action_frame() function, the condition check for P2P Presence response frame is not needed, since the wpa_supplicant is properly sending the P2P Presense Response frame on the P2P-GO vif instead of the P2P-Device vif. Cc: stable@vger.kernel.org Fixes: 18e2f61db3b7 ("brcmfmac: P2P action frame tx") Signed-off-by: Gokul Sivakumar <gokulkumar.sivakumar@infineon.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://patch.msgid.link/20251013102819.9727-1-gokulkumar.sivakumar@infineon.com [Cc stable] Signed-off-by: Johannes Berg <johannes.berg@intel.com> [ removed hunks for P2P presence response check and dwell_overflow logic ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 3776c685ebe5f43e9060af06872661de55e80b9a ]

Currently, whenever there is a need to transmit an Action frame,
the brcmfmac driver always uses the P2P vif to send the "actframe" IOVAR to
firmware. The P2P interfaces were available when wpa_supplicant is managing
the wlan interface.

However, the P2P interfaces are not created/initialized when only hostapd
is managing the wlan interface. And if hostapd receives an ANQP Query REQ
Action frame even from an un-associated STA, the brcmfmac driver tries
to use an uninitialized P2P vif pointer for sending the IOVAR to firmware.
This NULL pointer dereferencing triggers a driver crash.

 [ 1417.074538] Unable to handle kernel NULL pointer dereference at virtual
 address 0000000000000000
 [...]
 [ 1417.075188] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT)
 [...]
 [ 1417.075653] Call trace:
 [ 1417.075662]  brcmf_p2p_send_action_frame+0x23c/0xc58 [brcmfmac]
 [ 1417.075738]  brcmf_cfg80211_mgmt_tx+0x304/0x5c0 [brcmfmac]
 [ 1417.075810]  cfg80211_mlme_mgmt_tx+0x1b0/0x428 [cfg80211]
 [ 1417.076067]  nl80211_tx_mgmt+0x238/0x388 [cfg80211]
 [ 1417.076281]  genl_family_rcv_msg_doit+0xe0/0x158
 [ 1417.076302]  genl_rcv_msg+0x220/0x2a0
 [ 1417.076317]  netlink_rcv_skb+0x68/0x140
 [ 1417.076330]  genl_rcv+0x40/0x60
 [ 1417.076343]  netlink_unicast+0x330/0x3b8
 [ 1417.076357]  netlink_sendmsg+0x19c/0x3f8
 [ 1417.076370]  __sock_sendmsg+0x64/0xc0
 [ 1417.076391]  ____sys_sendmsg+0x268/0x2a0
 [ 1417.076408]  ___sys_sendmsg+0xb8/0x118
 [ 1417.076427]  __sys_sendmsg+0x90/0xf8
 [ 1417.076445]  __arm64_sys_sendmsg+0x2c/0x40
 [ 1417.076465]  invoke_syscall+0x50/0x120
 [ 1417.076486]  el0_svc_common.constprop.0+0x48/0xf0
 [ 1417.076506]  do_el0_svc+0x24/0x38
 [ 1417.076525]  el0_svc+0x30/0x100
 [ 1417.076548]  el0t_64_sync_handler+0x100/0x130
 [ 1417.076569]  el0t_64_sync+0x190/0x198
 [ 1417.076589] Code: f9401e80 aa1603e2 f9403be1 5280e483 (f9400000)

Fix this, by always using the vif corresponding to the wdev on which the
Action frame Transmission request was initiated by the userspace. This way,
even if P2P vif is not available, the IOVAR is sent to firmware on AP vif
and the ANQP Query RESP Action frame is transmitted without crashing the
driver.

Move init_completion() for "send_af_done" from brcmf_p2p_create_p2pdev()
to brcmf_p2p_attach(). Because the former function would not get executed
when only hostapd is managing wlan interface, and it is not safe to do
reinit_completion() later in brcmf_p2p_tx_action_frame(), without any prior
init_completion().

And in the brcmf_p2p_tx_action_frame() function, the condition check for
P2P Presence response frame is not needed, since the wpa_supplicant is
properly sending the P2P Presense Response frame on the P2P-GO vif instead
of the P2P-Device vif.

Cc: stable@vger.kernel.org
Fixes: 18e2f61db3b7 ("brcmfmac: P2P action frame tx")
Signed-off-by: Gokul Sivakumar <gokulkumar.sivakumar@infineon.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20251013102819.9727-1-gokulkumar.sivakumar@infineon.com
[Cc stable]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
[ removed hunks for P2P presence response check and dwell_overflow logic ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
wifi: brcmsmac: Remove const from tbl_ptr parameter in wlc_lcnphy_common_read_table() 2025-08-28T14:21:31+00:00 Nathan Chancellor nathan@kernel.org 2025-07-16T02:45:23+00:00 1d7f9ad781e9a6ae9b459face9aa152d244a4558 commit 81284e86bf8849f8e98e8ead3ff5811926b2107f upstream. A new warning in clang [1] complains that diq_start in wlc_lcnphy_tx_iqlo_cal() is passed uninitialized as a const pointer to wlc_lcnphy_common_read_table(): drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c:2728:13: error: variable 'diq_start' is uninitialized when passed as a const pointer argument here [-Werror,-Wuninitialized-const-pointer] 2728 | &diq_start, 1, 16, 69); | ^~~~~~~~~ The table pointer passed to wlc_lcnphy_common_read_table() should not be considered constant, as wlc_phy_read_table() is ultimately going to update it. Remove the const qualifier from the tbl_ptr to clear up the warning. Cc: stable@vger.kernel.org Closes: https://github.com/ClangBuiltLinux/linux/issues/2108 Fixes: 5b435de0d786 ("net: wireless: add brcm80211 drivers") Link: https://github.com/llvm/llvm-project/commit/00dacf8c22f065cb52efb14cd091d441f19b319e [1] Signed-off-by: Nathan Chancellor <nathan@kernel.org> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>> Link: https://patch.msgid.link/20250715-brcmsmac-fix-uninit-const-pointer-v1-1-16e6a51a8ef4@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 81284e86bf8849f8e98e8ead3ff5811926b2107f upstream.

A new warning in clang [1] complains that diq_start in
wlc_lcnphy_tx_iqlo_cal() is passed uninitialized as a const pointer to
wlc_lcnphy_common_read_table():

  drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c:2728:13: error: variable 'diq_start' is uninitialized when passed as a const pointer argument here [-Werror,-Wuninitialized-const-pointer]
   2728 |                                                      &diq_start, 1, 16, 69);
        |                                                       ^~~~~~~~~

The table pointer passed to wlc_lcnphy_common_read_table() should not be
considered constant, as wlc_phy_read_table() is ultimately going to
update it. Remove the const qualifier from the tbl_ptr to clear up the
warning.

Cc: stable@vger.kernel.org
Closes: https://github.com/ClangBuiltLinux/linux/issues/2108
Fixes: 5b435de0d786 ("net: wireless: add brcm80211 drivers")
Link: https://github.com/llvm/llvm-project/commit/00dacf8c22f065cb52efb14cd091d441f19b319e [1]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>>
Link: https://patch.msgid.link/20250715-brcmsmac-fix-uninit-const-pointer-v1-1-16e6a51a8ef4@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
wifi: brcmfmac: fix P2P discovery failure in P2P peer due to missing P2P IE 2025-08-28T14:21:20+00:00 Gokul Sivakumar gokulkumar.sivakumar@infineon.com 2025-06-26T05:07:02+00:00 37272a327bd99bd33d50d892acb97b678b3df1cf [ Upstream commit 579bf8037b70b644a674c126a32bbb2212cf5c21 ] After commit bd99a3013bdc ("brcmfmac: move configuration of probe request IEs"), the probe request MGMT IE addition operation brcmf_vif_set_mgmt_ie() got moved from the brcmf_p2p_scan_prep() to the brcmf_cfg80211_scan(). Because of this, as part of the scan request handler for the P2P Discovery, vif struct used for adding the Probe Request P2P IE in firmware got changed from the P2PAPI_BSSCFG_DEVICE vif to P2PAPI_BSSCFG_PRIMARY vif incorrectly. So the firmware stopped adding P2P IE to the outgoing P2P Discovery probe requests frames and the other P2P peers were unable to discover this device causing a regression on the P2P feature. To fix this, while setting the P2P IE in firmware, properly use the vif of the P2P discovery wdev on which the driver received the P2P scan request. This is done by not changing the vif pointer, until brcmf_vif_set_mgmt_ie() is completed. Fixes: bd99a3013bdc ("brcmfmac: move configuration of probe request IEs") Signed-off-by: Gokul Sivakumar <gokulkumar.sivakumar@infineon.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://patch.msgid.link/20250626050706.7271-1-gokulkumar.sivakumar@infineon.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 579bf8037b70b644a674c126a32bbb2212cf5c21 ]

After commit bd99a3013bdc ("brcmfmac: move configuration of probe request
IEs"), the probe request MGMT IE addition operation brcmf_vif_set_mgmt_ie()
got moved from the brcmf_p2p_scan_prep() to the brcmf_cfg80211_scan().

Because of this, as part of the scan request handler for the P2P Discovery,
vif struct used for adding the Probe Request P2P IE in firmware got changed
from the P2PAPI_BSSCFG_DEVICE vif to P2PAPI_BSSCFG_PRIMARY vif incorrectly.
So the firmware stopped adding P2P IE to the outgoing P2P Discovery probe
requests frames and the other P2P peers were unable to discover this device
causing a regression on the P2P feature.

To fix this, while setting the P2P IE in firmware, properly use the vif of
the P2P discovery wdev on which the driver received the P2P scan request.
This is done by not changing the vif pointer, until brcmf_vif_set_mgmt_ie()
is completed.

Fixes: bd99a3013bdc ("brcmfmac: move configuration of probe request IEs")
Signed-off-by: Gokul Sivakumar <gokulkumar.sivakumar@infineon.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20250626050706.7271-1-gokulkumar.sivakumar@infineon.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
wifi: brcm80211: fmac: Add error handling for brcmf_usb_dl_writeimage() 2025-06-04T12:32:24+00:00 Wentao Liang vulab@iscas.ac.cn 2025-04-22T04:22:02+00:00 972bf75e53f778c78039c5d139dd47443a6d66a1 commit 8e089e7b585d95122c8122d732d1d5ef8f879396 upstream. The function brcmf_usb_dl_writeimage() calls the function brcmf_usb_dl_cmd() but dose not check its return value. The 'state.state' and the 'state.bytes' are uninitialized if the function brcmf_usb_dl_cmd() fails. It is dangerous to use uninitialized variables in the conditions. Add error handling for brcmf_usb_dl_cmd() to jump to error handling path if the brcmf_usb_dl_cmd() fails and the 'state.state' and the 'state.bytes' are uninitialized. Improve the error message to report more detailed error information. Fixes: 71bb244ba2fd ("brcm80211: fmac: add USB support for bcm43235/6/8 chipsets") Cc: stable@vger.kernel.org # v3.4+ Signed-off-by: Wentao Liang <vulab@iscas.ac.cn> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://patch.msgid.link/20250422042203.2259-1-vulab@iscas.ac.cn Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 8e089e7b585d95122c8122d732d1d5ef8f879396 upstream.

The function brcmf_usb_dl_writeimage() calls the function
brcmf_usb_dl_cmd() but dose not check its return value. The
'state.state' and the 'state.bytes' are uninitialized if the
function brcmf_usb_dl_cmd() fails. It is dangerous to use
uninitialized variables in the conditions.

Add error handling for brcmf_usb_dl_cmd() to jump to error
handling path if the brcmf_usb_dl_cmd() fails and the
'state.state' and the 'state.bytes' are uninitialized.

Improve the error message to report more detailed error
information.

Fixes: 71bb244ba2fd ("brcm80211: fmac: add USB support for bcm43235/6/8 chipsets")
Cc: stable@vger.kernel.org # v3.4+
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20250422042203.2259-1-vulab@iscas.ac.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
wifi: brcmfmac: fix NULL pointer dereference in brcmf_txfinalize() 2025-03-13T11:43:08+00:00 Marcel Hamer marcel.hamer@windriver.com 2025-01-16T13:22:40+00:00 2326e19190e176fd72bb542b837a9d2b7fcb8693 commit 68abd0c4ebf24cd499841a488b97a6873d5efabb upstream. On removal of the device or unloading of the kernel module a potential NULL pointer dereference occurs. The following sequence deletes the interface: brcmf_detach() brcmf_remove_interface() brcmf_del_if() Inside the brcmf_del_if() function the drvr->if2bss[ifidx] is updated to BRCMF_BSSIDX_INVALID (-1) if the bsscfgidx matches. After brcmf_remove_interface() call the brcmf_proto_detach() function is called providing the following sequence: brcmf_detach() brcmf_proto_detach() brcmf_proto_msgbuf_detach() brcmf_flowring_detach() brcmf_msgbuf_delete_flowring() brcmf_msgbuf_remove_flowring() brcmf_flowring_delete() brcmf_get_ifp() brcmf_txfinalize() Since brcmf_get_ip() can and actually will return NULL in this case the call to brcmf_txfinalize() will result in a NULL pointer dereference inside brcmf_txfinalize() when trying to update ifp->ndev->stats.tx_errors. This will only happen if a flowring still has an skb. Although the NULL pointer dereference has only been seen when trying to update the tx statistic, all other uses of the ifp pointer have been guarded as well with an early return if ifp is NULL. Cc: stable@vger.kernel.org Signed-off-by: Marcel Hamer <marcel.hamer@windriver.com> Link: https://lore.kernel.org/all/b519e746-ddfd-421f-d897-7620d229e4b2@gmail.com/ Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20250116132240.731039-1-marcel.hamer@windriver.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 68abd0c4ebf24cd499841a488b97a6873d5efabb upstream.

On removal of the device or unloading of the kernel module a potential NULL
pointer dereference occurs.

The following sequence deletes the interface:

  brcmf_detach()
    brcmf_remove_interface()
      brcmf_del_if()

Inside the brcmf_del_if() function the drvr->if2bss[ifidx] is updated to
BRCMF_BSSIDX_INVALID (-1) if the bsscfgidx matches.

After brcmf_remove_interface() call the brcmf_proto_detach() function is
called providing the following sequence:

  brcmf_detach()
    brcmf_proto_detach()
      brcmf_proto_msgbuf_detach()
        brcmf_flowring_detach()
          brcmf_msgbuf_delete_flowring()
            brcmf_msgbuf_remove_flowring()
              brcmf_flowring_delete()
                brcmf_get_ifp()
                brcmf_txfinalize()

Since brcmf_get_ip() can and actually will return NULL in this case the
call to brcmf_txfinalize() will result in a NULL pointer dereference inside
brcmf_txfinalize() when trying to update ifp->ndev->stats.tx_errors.

This will only happen if a flowring still has an skb.

Although the NULL pointer dereference has only been seen when trying to
update the tx statistic, all other uses of the ifp pointer have been
guarded as well with an early return if ifp is NULL.

Cc: stable@vger.kernel.org
Signed-off-by: Marcel Hamer <marcel.hamer@windriver.com>
Link: https://lore.kernel.org/all/b519e746-ddfd-421f-d897-7620d229e4b2@gmail.com/
Acked-by: Arend van Spriel  <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20250116132240.731039-1-marcel.hamer@windriver.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
wifi: brcmsmac: add gain range check to wlc_phy_iqcal_gainparams_nphy() 2025-03-13T11:43:03+00:00 Dmitry Antipov dmantipov@yandex.ru 2024-12-10T07:04:41+00:00 0a457223cb2b9ca46bae7de387d0f4c093b0220d [ Upstream commit 3f4a0948c3524ae50f166dbc6572a3296b014e62 ] In 'wlc_phy_iqcal_gainparams_nphy()', add gain range check to WARN() instead of possible out-of-bounds 'tbl_iqcal_gainparams_nphy' access. Compile tested only. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241210070441.836362-1-dmantipov@yandex.ru Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 3f4a0948c3524ae50f166dbc6572a3296b014e62 ]

In 'wlc_phy_iqcal_gainparams_nphy()', add gain range check to WARN()
instead of possible out-of-bounds 'tbl_iqcal_gainparams_nphy' access.
Compile tested only.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241210070441.836362-1-dmantipov@yandex.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
wifi: brcmfmac: Fix oops due to NULL pointer dereference in brcmf_sdiod_sglist_rw() 2024-12-14T18:44:52+00:00 Norbert van Bolhuis nvbolhuis@gmail.com 2024-11-07T13:28:13+00:00 342f87d263462c2670b77ea9a32074cab2ac6fa1 [ Upstream commit 857282b819cbaa0675aaab1e7542e2c0579f52d7 ] This patch fixes a NULL pointer dereference bug in brcmfmac that occurs when a high 'sd_sgentry_align' value applies (e.g. 512) and a lot of queued SKBs are sent from the pkt queue. The problem is the number of entries in the pre-allocated sgtable, it is nents = max(rxglom_size, txglom_size) + max(rxglom_size, txglom_size) >> 4 + 1. Given the default [rt]xglom_size=32 it's actually 35 which is too small. Worst case, the pkt queue can end up with 64 SKBs. This occurs when a new SKB is added for each original SKB if tailroom isn't enough to hold tail_pad. At least one sg entry is needed for each SKB. So, eventually the "skb_queue_walk loop" in brcmf_sdiod_sglist_rw may run out of sg entries. This makes sg_next return NULL and this causes the oops. The patch sets nents to max(rxglom_size, txglom_size) * 2 to be able handle the worst-case. Btw. this requires only 64-35=29 * 16 (or 20 if CONFIG_NEED_SG_DMA_LENGTH) = 464 additional bytes of memory. Signed-off-by: Norbert van Bolhuis <nvbolhuis@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241107132903.13513-1-nvbolhuis@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 857282b819cbaa0675aaab1e7542e2c0579f52d7 ]

This patch fixes a NULL pointer dereference bug in brcmfmac that occurs
when a high 'sd_sgentry_align' value applies (e.g. 512) and a lot of queued SKBs
are sent from the pkt queue.

The problem is the number of entries in the pre-allocated sgtable, it is
nents = max(rxglom_size, txglom_size) + max(rxglom_size, txglom_size) >> 4 + 1.
Given the default [rt]xglom_size=32 it's actually 35 which is too small.
Worst case, the pkt queue can end up with 64 SKBs. This occurs when a new SKB
is added for each original SKB if tailroom isn't enough to hold tail_pad.
At least one sg entry is needed for each SKB. So, eventually the "skb_queue_walk loop"
in brcmf_sdiod_sglist_rw may run out of sg entries. This makes sg_next return
NULL and this causes the oops.

The patch sets nents to max(rxglom_size, txglom_size) * 2 to be able handle
the worst-case.
Btw. this requires only 64-35=29 * 16 (or 20 if CONFIG_NEED_SG_DMA_LENGTH) = 464
additional bytes of memory.

Signed-off-by: Norbert van Bolhuis <nvbolhuis@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241107132903.13513-1-nvbolhuis@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
wifi: brcmsmac: advertise MFP_CAPABLE to enable WPA3 2024-09-12T09:03:52+00:00 Arend van Spriel arend.vanspriel@broadcom.com 2024-06-17T12:26:09+00:00 f7ffb098bd1914bf3d50939dd27477a598a15923 [ Upstream commit dbb5265a5d7cca1cdba7736dba313ab7d07bc19d ] After being asked about support for WPA3 for BCM43224 chipset it was found that all it takes is setting the MFP_CAPABLE flag and mac80211 will take care of all that is needed [1]. Link: https://lore.kernel.org/linux-wireless/20200526155909.5807-2-Larry.Finger@lwfinger.net/ [1] Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Tested-by: Reijer Boekhoff <reijerboekhoff@protonmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20240617122609.349582-1-arend.vanspriel@broadcom.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit dbb5265a5d7cca1cdba7736dba313ab7d07bc19d ]

After being asked about support for WPA3 for BCM43224 chipset it
was found that all it takes is setting the MFP_CAPABLE flag and
mac80211 will take care of all that is needed [1].

Link: https://lore.kernel.org/linux-wireless/20200526155909.5807-2-Larry.Finger@lwfinger.net/ [1]
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Tested-by: Reijer Boekhoff <reijerboekhoff@protonmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240617122609.349582-1-arend.vanspriel@broadcom.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
wifi: brcmsmac: LCN PHY code is used for BCM4313 2G-only device 2024-08-19T03:33:28+00:00 Samasth Norway Ananda samasth.norway.ananda@oracle.com 2024-05-09T23:10:37+00:00 de9f06b37d148c5f6de89988f4e9dab21a124d64 [ Upstream commit c636fa85feb450ca414a10010ed05361a73c93a6 ] The band_idx variable in the function wlc_lcnphy_tx_iqlo_cal() will never be set to 1 as BCM4313 is the only device for which the LCN PHY code is used. This is a 2G-only device. Fixes: 5b435de0d786 ("net: wireless: add brcm80211 drivers") Signed-off-by: Samasth Norway Ananda <samasth.norway.ananda@oracle.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240509231037.2014109-1-samasth.norway.ananda@oracle.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit c636fa85feb450ca414a10010ed05361a73c93a6 ]

The band_idx variable in the function wlc_lcnphy_tx_iqlo_cal() will
never be set to 1 as BCM4313 is the only device for which the LCN PHY
code is used. This is a 2G-only device.

Fixes: 5b435de0d786 ("net: wireless: add brcm80211 drivers")
Signed-off-by: Samasth Norway Ananda <samasth.norway.ananda@oracle.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240509231037.2014109-1-samasth.norway.ananda@oracle.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
wifi: brcmfmac: Fix use-after-free bug in brcmf_cfg80211_detach 2024-04-13T10:51:21+00:00 Zheng Wang zyytlz.wz@163.com 2024-01-07T07:25:04+00:00 8e3f03f4ef7c36091f46e7349096efb5a2cdb3a1 [ Upstream commit 0f7352557a35ab7888bc7831411ec8a3cbe20d78 ] This is the candidate patch of CVE-2023-47233 : https://nvd.nist.gov/vuln/detail/CVE-2023-47233 In brcm80211 driver,it starts with the following invoking chain to start init a timeout worker: ->brcmf_usb_probe ->brcmf_usb_probe_cb ->brcmf_attach ->brcmf_bus_started ->brcmf_cfg80211_attach ->wl_init_priv ->brcmf_init_escan ->INIT_WORK(&cfg->escan_timeout_work, brcmf_cfg80211_escan_timeout_worker); If we disconnect the USB by hotplug, it will call brcmf_usb_disconnect to make cleanup. The invoking chain is : brcmf_usb_disconnect ->brcmf_usb_disconnect_cb ->brcmf_detach ->brcmf_cfg80211_detach ->kfree(cfg); While the timeout woker may still be running. This will cause a use-after-free bug on cfg in brcmf_cfg80211_escan_timeout_worker. Fix it by deleting the timer and canceling the worker in brcmf_cfg80211_detach. Fixes: e756af5b30b0 ("brcmfmac: add e-scan support.") Signed-off-by: Zheng Wang <zyytlz.wz@163.com> Cc: stable@vger.kernel.org [arend.vanspriel@broadcom.com: keep timer delete as is and cancel work just before free] Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240107072504.392713-1-arend.vanspriel@broadcom.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 0f7352557a35ab7888bc7831411ec8a3cbe20d78 ]

This is the candidate patch of CVE-2023-47233 :
https://nvd.nist.gov/vuln/detail/CVE-2023-47233

In brcm80211 driver,it starts with the following invoking chain
to start init a timeout worker:

->brcmf_usb_probe
  ->brcmf_usb_probe_cb
    ->brcmf_attach
      ->brcmf_bus_started
        ->brcmf_cfg80211_attach
          ->wl_init_priv
            ->brcmf_init_escan
              ->INIT_WORK(&cfg->escan_timeout_work,
		  brcmf_cfg80211_escan_timeout_worker);

If we disconnect the USB by hotplug, it will call
brcmf_usb_disconnect to make cleanup. The invoking chain is :

brcmf_usb_disconnect
  ->brcmf_usb_disconnect_cb
    ->brcmf_detach
      ->brcmf_cfg80211_detach
        ->kfree(cfg);

While the timeout woker may still be running. This will cause
a use-after-free bug on cfg in brcmf_cfg80211_escan_timeout_worker.

Fix it by deleting the timer and canceling the worker in
brcmf_cfg80211_detach.

Fixes: e756af5b30b0 ("brcmfmac: add e-scan support.")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Cc: stable@vger.kernel.org
[arend.vanspriel@broadcom.com: keep timer delete as is and cancel work just before free]
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240107072504.392713-1-arend.vanspriel@broadcom.com
Signed-off-by: Sasha Levin <sashal@kernel.org>