ath10k

* fix invalid NSS for 4x4 devices
* add QCA9377 hw1.0 support
* fix QCA6174 regression with CE5 usage

wil6210

* new maintainer - Maya Erez

commit a70587b3389a ("ath10k: configure copy engine 5 for HTT messages")
moved send completion polling under HTT Rx (CE 5) service routine. For
QCA6174 based devices copy engine 1 (CE 1) is used for HTT Rx instead
of CE 5. So send completion never be called. This is causing "failed to
transmit packet, dropping: -105" errors. Fix this by processing send
completion from CE 1 service routine instead of CE 5.

Fixes: a70587b3389a ("ath10k: configure copy engine 5 for HTT messages")
Tested-by: Ryan Hsu <ryanhsu@qca.qualcomm.com>
Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

Commit a70587b3389a ("ath10k: configure copy engine 5 for HTT messages")
introduced to use the unused CE5 for target to host message. For the device
like QCA6174, CE5 already assigned for other feature. So for QCA6174, override
the CE5 configuration and use the CE1 instead.

This patch is based on Rajkumar's earlier patch.

Fixes: a70587b3389a ("ath10k: configure copy engine 5 for HTT messages")
Signed-off-by: Ryan Hsu <ryanhsu@qca.qualcomm.com>
Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

Add new BMI target version and chip id revision. Register it
on supported chips list.

Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

A follow up patch introducing a QCA9377 hw1.0 support will need
this device identification helper for an explicit distinction of
HWs, as apparently both QCA6174 hw3.0 and QCA9377 share the same BMI
target version (0x0502000x). For the QCA9377 hw1.1 previously
added we were just lucky we did not overlap with the same chip_id_rev.

Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

The uart_pin was incorrectly configured for QCA9377
and the recently added hw_params were omitted.

Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

When introducing the original QCA9377 support, the chip target
version was wrongly picked. The chip advertising itself with
bmi target value equal to 0x05020001 is in fact a 1.1 revision.
I realized this once I got a real 1.1 hw to play with.

Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

The number of spatial streams that are derived from chain mask
for 4x4 devices is using wrong bitmask and conditional check.
This is affecting downlink throughput for QCA99x0 devices. Earlier
cfg_tx_chainmask is not filled by default until user configured it
and so get_nss_from_chainmask never be called. This issue is exposed
by recent commit 166de3f1895d ("ath10k: remove supported chain mask").
By default maximum supported chain mask is filled in cfg_tx_chainmask.

Cc: stable@vger.kernel.org
Fixes: 5572a95b4b ("ath10k: apply chainmask settings to vdev on creation")
Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

Pull driver core updates from Greg KH:
 "Here's the "big" driver core updates for 4.4-rc1.  Primarily a bunch
  of debugfs updates, with a smattering of minor driver core fixes and
  updates as well.

  All have been in linux-next for a long time"

* tag 'driver-core-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  debugfs: Add debugfs_create_ulong()
  of: to support binding numa node to specified device in devicetree
  debugfs: Add read-only/write-only bool file ops
  debugfs: Add read-only/write-only size_t file ops
  debugfs: Add read-only/write-only x64 file ops
  debugfs: Consolidate file mode checks in debugfs_create_*()
  Revert "mm: Check if section present during memory block (un)registering"
  driver-core: platform: Provide helpers for multi-driver modules
  mm: Check if section present during memory block (un)registering
  devres: fix a for loop bounds check
  CMA: fix CONFIG_CMA_SIZE_MBYTES overflow in 64bit
  base/platform: assert that dev_pm_domain callbacks are called unconditionally
  sysfs: correctly handle short reads on PREALLOC attrs.
  base: soc: siplify ida usage
  kobject: move EXPORT_SYMBOL() macros next to corresponding definitions
  kobject: explain what kobject's sd field is
  debugfs: document that debugfs_remove*() accepts NULL and error values
  debugfs: Pass bool pointer to debugfs_create_bool()
  ACPI / EC: Fix broken 64bit big-endian users of 'global_lock'