linux-stable.git/drivers/net/wireless/ath, branch v4.19 Linux kernel stable tree Merge tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc 2018-08-18T18:04:51+00:00 Linus Torvalds torvalds@linux-foundation.org 2018-08-18T18:04:51+00:00 d5acba26bfa097a618be425522b1ec4269d3edaf Pull char/misc driver updates from Greg KH: "Here is the bit set of char/misc drivers for 4.19-rc1 There is a lot here, much more than normal, seems like everyone is writing new driver subsystems these days... Anyway, major things here are: - new FSI driver subsystem, yet-another-powerpc low-level hardware bus - gnss, finally an in-kernel GPS subsystem to try to tame all of the crazy out-of-tree drivers that have been floating around for years, combined with some really hacky userspace implementations. This is only for GNSS receivers, but you have to start somewhere, and this is great to see. Other than that, there are new slimbus drivers, new coresight drivers, new fpga drivers, and loads of DT bindings for all of these and existing drivers. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits) android: binder: Rate-limit debug and userspace triggered err msgs fsi: sbefifo: Bump max command length fsi: scom: Fix NULL dereference misc: mic: SCIF Fix scif_get_new_port() error handling misc: cxl: changed asterisk position genwqe: card_base: Use true and false for boolean values misc: eeprom: assignment outside the if statement uio: potential double frees if __uio_register_device() fails eeprom: idt_89hpesx: clean up an error pointer vs NULL inconsistency misc: ti-st: Fix memory leak in the error path of probe() android: binder: Show extra_buffers_size in trace firmware: vpd: Fix section enabled flag on vpd_section_destroy platform: goldfish: Retire pdev_bus goldfish: Use dedicated macros instead of manual bit shifting goldfish: Add missing includes to goldfish.h mux: adgs1408: new driver for Analog Devices ADGS1408/1409 mux dt-bindings: mux: add adi,adgs1408 Drivers: hv: vmbus: Cleanup synic memory free path Drivers: hv: vmbus: Remove use of slow_virt_to_phys() Drivers: hv: vmbus: Reset the channel callback in vmbus_onoffer_rescind() ... 
Pull char/misc driver updates from Greg KH:
 "Here is the bit set of char/misc drivers for 4.19-rc1

  There is a lot here, much more than normal, seems like everyone is
  writing new driver subsystems these days... Anyway, major things here
  are:

   - new FSI driver subsystem, yet-another-powerpc low-level hardware
     bus

   - gnss, finally an in-kernel GPS subsystem to try to tame all of the
     crazy out-of-tree drivers that have been floating around for years,
     combined with some really hacky userspace implementations. This is
     only for GNSS receivers, but you have to start somewhere, and this
     is great to see.

  Other than that, there are new slimbus drivers, new coresight drivers,
  new fpga drivers, and loads of DT bindings for all of these and
  existing drivers.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits)
  android: binder: Rate-limit debug and userspace triggered err msgs
  fsi: sbefifo: Bump max command length
  fsi: scom: Fix NULL dereference
  misc: mic: SCIF Fix scif_get_new_port() error handling
  misc: cxl: changed asterisk position
  genwqe: card_base: Use true and false for boolean values
  misc: eeprom: assignment outside the if statement
  uio: potential double frees if __uio_register_device() fails
  eeprom: idt_89hpesx: clean up an error pointer vs NULL inconsistency
  misc: ti-st: Fix memory leak in the error path of probe()
  android: binder: Show extra_buffers_size in trace
  firmware: vpd: Fix section enabled flag on vpd_section_destroy
  platform: goldfish: Retire pdev_bus
  goldfish: Use dedicated macros instead of manual bit shifting
  goldfish: Add missing includes to goldfish.h
  mux: adgs1408: new driver for Analog Devices ADGS1408/1409 mux
  dt-bindings: mux: add adi,adgs1408
  Drivers: hv: vmbus: Cleanup synic memory free path
  Drivers: hv: vmbus: Remove use of slow_virt_to_phys()
  Drivers: hv: vmbus: Reset the channel callback in vmbus_onoffer_rescind()
  ...
Merge tag 'pci-v4.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci 2018-08-16T16:21:54+00:00 Linus Torvalds torvalds@linux-foundation.org 2018-08-16T16:21:54+00:00 4e31843f681c34f7185e7d169fe627c9d891ce2c Pull pci updates from Bjorn Helgaas: - Decode AER errors with names similar to "lspci" (Tyler Baicar) - Expose AER statistics in sysfs (Rajat Jain) - Clear AER status bits selectively based on the type of recovery (Oza Pawandeep) - Honor "pcie_ports=native" even if HEST sets FIRMWARE_FIRST (Alexandru Gagniuc) - Don't clear AER status bits if we're using the "Firmware-First" strategy where firmware owns the registers (Alexandru Gagniuc) - Use sysfs_match_string() to simplify ASPM sysfs parsing (Andy Shevchenko) - Remove unnecessary includes of <linux/pci-aspm.h> (Bjorn Helgaas) - Defer DPC event handling to work queue (Keith Busch) - Use threaded IRQ for DPC bottom half (Keith Busch) - Print AER status while handling DPC events (Keith Busch) - Work around IDT switch ACS Source Validation erratum (James Puthukattukaran) - Emit diagnostics for all cases of PCIe Link downtraining (Links operating slower than they're capable of) (Alexandru Gagniuc) - Skip VFs when configuring Max Payload Size (Myron Stowe) - Reduce Root Port Max Payload Size if necessary when hot-adding a device below it (Myron Stowe) - Simplify SHPC existence/permission checks (Bjorn Helgaas) - Remove hotplug sample skeleton driver (Lukas Wunner) - Convert pciehp to threaded IRQ handling (Lukas Wunner) - Improve pciehp tolerance of missed events and initially unstable links (Lukas Wunner) - Clear spurious pciehp events on resume (Lukas Wunner) - Add pciehp runtime PM support, including for Thunderbolt controllers (Lukas Wunner) - Support interrupts from pciehp bridges in D3hot (Lukas Wunner) - Mark fall-through switch cases before enabling -Wimplicit-fallthrough (Gustavo A. R. Silva) - Move DMA-debug PCI init from arch code to PCI core (Christoph Hellwig) - Fix pci_request_irq() usage of IRQF_ONESHOT when no handler is supplied (Heiner Kallweit) - Unify PCI and DMA direction #defines (Shunyong Yang) - Add PCI_DEVICE_DATA() macro (Andy Shevchenko) - Check for VPD completion before checking for timeout (Bert Kenward) - Limit Netronome NFP5000 config space size to work around erratum (Jakub Kicinski) - Set IRQCHIP_ONESHOT_SAFE for PCI MSI irqchips (Heiner Kallweit) - Document ACPI description of PCI host bridges (Bjorn Helgaas) - Add "pci=disable_acs_redir=" parameter to disable ACS redirection for peer-to-peer DMA support (we don't have the peer-to-peer support yet; this is just one piece) (Logan Gunthorpe) - Clean up devm_of_pci_get_host_bridge_resources() resource allocation (Jan Kiszka) - Fixup resizable BARs after suspend/resume (Christian König) - Make "pci=earlydump" generic (Sinan Kaya) - Fix ROM BAR access routines to stay in bounds and check for signature correctly (Rex Zhu) - Add DMA alias quirk for Microsemi Switchtec NTB (Doug Meyer) - Expand documentation for pci_add_dma_alias() (Logan Gunthorpe) - To avoid bus errors, enable PASID only if entire path supports End-End TLP prefixes (Sinan Kaya) - Unify slot and bus reset functions and remove hotplug knowledge from callers (Sinan Kaya) - Add Function-Level Reset quirks for Intel and Samsung NVMe devices to fix guest reboot issues (Alex Williamson) - Add function 1 DMA alias quirk for Marvell 88SS9183 PCIe SSD Controller (Bjorn Helgaas) - Remove Xilinx AXI-PCIe host bridge arch dependency (Palmer Dabbelt) - Remove Aardvark outbound window configuration (Evan Wang) - Fix Aardvark bridge window sizing issue (Zachary Zhang) - Convert Aardvark to use pci_host_probe() to reduce code duplication (Thomas Petazzoni) - Correct the Cadence cdns_pcie_writel() signature (Alan Douglas) - Add Cadence support for optional generic PHYs (Alan Douglas) - Add Cadence power management ops (Alan Douglas) - Remove redundant variable from Cadence driver (Colin Ian King) - Add Kirin MSI support (Xiaowei Song) - Drop unnecessary root_bus_nr setting from exynos, imx6, keystone, armada8k, artpec6, designware-plat, histb, qcom, spear13xx (Shawn Guo) - Move link notification settings from DesignWare core to individual drivers (Gustavo Pimentel) - Add endpoint library MSI-X interfaces (Gustavo Pimentel) - Correct signature of endpoint library IRQ interfaces (Gustavo Pimentel) - Add DesignWare endpoint library MSI-X callbacks (Gustavo Pimentel) - Add endpoint library MSI-X test support (Gustavo Pimentel) - Remove unnecessary GFP_ATOMIC from Hyper-V "new child" allocation (Jia-Ju Bai) - Add more devices to Broadcom PAXC quirk (Ray Jui) - Work around corrupted Broadcom PAXC config space to enable SMMU and GICv3 ITS (Ray Jui) - Disable MSI parsing to work around broken Broadcom PAXC logic in some devices (Ray Jui) - Hide unconfigured functions to work around a Broadcom PAXC defect (Ray Jui) - Lower iproc log level to reduce console output during boot (Ray Jui) - Fix mobiveil iomem/phys_addr_t type usage (Lorenzo Pieralisi) - Fix mobiveil missing include file (Lorenzo Pieralisi) - Add mobiveil Kconfig/Makefile support (Lorenzo Pieralisi) - Fix mvebu I/O space remapping issues (Thomas Petazzoni) - Use generic pci_host_bridge in mvebu instead of ARM-specific API (Thomas Petazzoni) - Whitelist VMD devices with fast interrupt handlers to avoid sharing vectors with slow handlers (Keith Busch) * tag 'pci-v4.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (153 commits) PCI/AER: Don't clear AER bits if error handling is Firmware-First PCI: Limit config space size for Netronome NFP5000 PCI/MSI: Set IRQCHIP_ONESHOT_SAFE for PCI-MSI irqchips PCI/VPD: Check for VPD access completion before checking for timeout PCI: Add PCI_DEVICE_DATA() macro to fully describe device ID entry PCI: Match Root Port's MPS to endpoint's MPSS as necessary PCI: Skip MPS logic for Virtual Functions (VFs) PCI: Add function 1 DMA alias quirk for Marvell 88SS9183 PCI: Check for PCIe Link downtraining PCI: Add ACS Redirect disable quirk for Intel Sunrise Point PCI: Add device-specific ACS Redirect disable infrastructure PCI: Convert device-specific ACS quirks from NULL termination to ARRAY_SIZE PCI: Add "pci=disable_acs_redir=" parameter for peer-to-peer support PCI: Allow specifying devices using a base bus and path of devfns PCI: Make specifying PCI devices in kernel parameters reusable PCI: Hide ACS quirk declarations inside PCI core PCI: Delay after FLR of Intel DC P3700 NVMe PCI: Disable Samsung SM961/PM961 NVMe before FLR PCI: Export pcie_has_flr() PCI: mvebu: Drop bogus comment above mvebu_pcie_map_registers() ... 
Pull pci updates from Bjorn Helgaas:

 - Decode AER errors with names similar to "lspci" (Tyler Baicar)

 - Expose AER statistics in sysfs (Rajat Jain)

 - Clear AER status bits selectively based on the type of recovery (Oza
   Pawandeep)

 - Honor "pcie_ports=native" even if HEST sets FIRMWARE_FIRST (Alexandru
   Gagniuc)

 - Don't clear AER status bits if we're using the "Firmware-First"
   strategy where firmware owns the registers (Alexandru Gagniuc)

 - Use sysfs_match_string() to simplify ASPM sysfs parsing (Andy
   Shevchenko)

 - Remove unnecessary includes of <linux/pci-aspm.h> (Bjorn Helgaas)

 - Defer DPC event handling to work queue (Keith Busch)

 - Use threaded IRQ for DPC bottom half (Keith Busch)

 - Print AER status while handling DPC events (Keith Busch)

 - Work around IDT switch ACS Source Validation erratum (James
   Puthukattukaran)

 - Emit diagnostics for all cases of PCIe Link downtraining (Links
   operating slower than they're capable of) (Alexandru Gagniuc)

 - Skip VFs when configuring Max Payload Size (Myron Stowe)

 - Reduce Root Port Max Payload Size if necessary when hot-adding a
   device below it (Myron Stowe)

 - Simplify SHPC existence/permission checks (Bjorn Helgaas)

 - Remove hotplug sample skeleton driver (Lukas Wunner)

 - Convert pciehp to threaded IRQ handling (Lukas Wunner)

 - Improve pciehp tolerance of missed events and initially unstable
   links (Lukas Wunner)

 - Clear spurious pciehp events on resume (Lukas Wunner)

 - Add pciehp runtime PM support, including for Thunderbolt controllers
   (Lukas Wunner)

 - Support interrupts from pciehp bridges in D3hot (Lukas Wunner)

 - Mark fall-through switch cases before enabling -Wimplicit-fallthrough
   (Gustavo A. R. Silva)

 - Move DMA-debug PCI init from arch code to PCI core (Christoph
   Hellwig)

 - Fix pci_request_irq() usage of IRQF_ONESHOT when no handler is
   supplied (Heiner Kallweit)

 - Unify PCI and DMA direction #defines (Shunyong Yang)

 - Add PCI_DEVICE_DATA() macro (Andy Shevchenko)

 - Check for VPD completion before checking for timeout (Bert Kenward)

 - Limit Netronome NFP5000 config space size to work around erratum
   (Jakub Kicinski)

 - Set IRQCHIP_ONESHOT_SAFE for PCI MSI irqchips (Heiner Kallweit)

 - Document ACPI description of PCI host bridges (Bjorn Helgaas)

 - Add "pci=disable_acs_redir=" parameter to disable ACS redirection for
   peer-to-peer DMA support (we don't have the peer-to-peer support yet;
   this is just one piece) (Logan Gunthorpe)

 - Clean up devm_of_pci_get_host_bridge_resources() resource allocation
   (Jan Kiszka)

 - Fixup resizable BARs after suspend/resume (Christian König)

 - Make "pci=earlydump" generic (Sinan Kaya)

 - Fix ROM BAR access routines to stay in bounds and check for signature
   correctly (Rex Zhu)

 - Add DMA alias quirk for Microsemi Switchtec NTB (Doug Meyer)

 - Expand documentation for pci_add_dma_alias() (Logan Gunthorpe)

 - To avoid bus errors, enable PASID only if entire path supports
   End-End TLP prefixes (Sinan Kaya)

 - Unify slot and bus reset functions and remove hotplug knowledge from
   callers (Sinan Kaya)

 - Add Function-Level Reset quirks for Intel and Samsung NVMe devices to
   fix guest reboot issues (Alex Williamson)

 - Add function 1 DMA alias quirk for Marvell 88SS9183 PCIe SSD
   Controller (Bjorn Helgaas)

 - Remove Xilinx AXI-PCIe host bridge arch dependency (Palmer Dabbelt)

 - Remove Aardvark outbound window configuration (Evan Wang)

 - Fix Aardvark bridge window sizing issue (Zachary Zhang)

 - Convert Aardvark to use pci_host_probe() to reduce code duplication
   (Thomas Petazzoni)

 - Correct the Cadence cdns_pcie_writel() signature (Alan Douglas)

 - Add Cadence support for optional generic PHYs (Alan Douglas)

 - Add Cadence power management ops (Alan Douglas)

 - Remove redundant variable from Cadence driver (Colin Ian King)

 - Add Kirin MSI support (Xiaowei Song)

 - Drop unnecessary root_bus_nr setting from exynos, imx6, keystone,
   armada8k, artpec6, designware-plat, histb, qcom, spear13xx (Shawn
   Guo)

 - Move link notification settings from DesignWare core to individual
   drivers (Gustavo Pimentel)

 - Add endpoint library MSI-X interfaces (Gustavo Pimentel)

 - Correct signature of endpoint library IRQ interfaces (Gustavo
   Pimentel)

 - Add DesignWare endpoint library MSI-X callbacks (Gustavo Pimentel)

 - Add endpoint library MSI-X test support (Gustavo Pimentel)

 - Remove unnecessary GFP_ATOMIC from Hyper-V "new child" allocation
   (Jia-Ju Bai)

 - Add more devices to Broadcom PAXC quirk (Ray Jui)

 - Work around corrupted Broadcom PAXC config space to enable SMMU and
   GICv3 ITS (Ray Jui)

 - Disable MSI parsing to work around broken Broadcom PAXC logic in some
   devices (Ray Jui)

 - Hide unconfigured functions to work around a Broadcom PAXC defect
   (Ray Jui)

 - Lower iproc log level to reduce console output during boot (Ray Jui)

 - Fix mobiveil iomem/phys_addr_t type usage (Lorenzo Pieralisi)

 - Fix mobiveil missing include file (Lorenzo Pieralisi)

 - Add mobiveil Kconfig/Makefile support (Lorenzo Pieralisi)

 - Fix mvebu I/O space remapping issues (Thomas Petazzoni)

 - Use generic pci_host_bridge in mvebu instead of ARM-specific API
   (Thomas Petazzoni)

 - Whitelist VMD devices with fast interrupt handlers to avoid sharing
   vectors with slow handlers (Keith Busch)

* tag 'pci-v4.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (153 commits)
  PCI/AER: Don't clear AER bits if error handling is Firmware-First
  PCI: Limit config space size for Netronome NFP5000
  PCI/MSI: Set IRQCHIP_ONESHOT_SAFE for PCI-MSI irqchips
  PCI/VPD: Check for VPD access completion before checking for timeout
  PCI: Add PCI_DEVICE_DATA() macro to fully describe device ID entry
  PCI: Match Root Port's MPS to endpoint's MPSS as necessary
  PCI: Skip MPS logic for Virtual Functions (VFs)
  PCI: Add function 1 DMA alias quirk for Marvell 88SS9183
  PCI: Check for PCIe Link downtraining
  PCI: Add ACS Redirect disable quirk for Intel Sunrise Point
  PCI: Add device-specific ACS Redirect disable infrastructure
  PCI: Convert device-specific ACS quirks from NULL termination to ARRAY_SIZE
  PCI: Add "pci=disable_acs_redir=" parameter for peer-to-peer support
  PCI: Allow specifying devices using a base bus and path of devfns
  PCI: Make specifying PCI devices in kernel parameters reusable
  PCI: Hide ACS quirk declarations inside PCI core
  PCI: Delay after FLR of Intel DC P3700 NVMe
  PCI: Disable Samsung SM961/PM961 NVMe before FLR
  PCI: Export pcie_has_flr()
  PCI: mvebu: Drop bogus comment above mvebu_pcie_map_registers()
  ...
ath9k: Remove unnecessary include of <linux/pci-aspm.h> 2018-08-06T19:32:21+00:00 Bjorn Helgaas bhelgaas@google.com 2018-07-25T19:53:40+00:00 a78613c08267107e3ffaa40290a269be79386fce The ath9k driver doesn't need anything provided by pci-aspm.h, so remove the unnecessary include of it. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Sinan Kaya <okaya@kernel.org> Acked-by: Kalle Valo <kvalo@codeaurora.org> 
The ath9k driver doesn't need anything provided by pci-aspm.h, so remove
the unnecessary include of it.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Sinan Kaya <okaya@kernel.org>
Acked-by: Kalle Valo <kvalo@codeaurora.org>
 wil6210: fix eDMA RX chaining 2018-07-31T08:02:09+00:00 Maya Erez merez@codeaurora.org 2018-07-24T07:44:40+00:00 1bb38e8bb81e5c43bc1a2b44bc8e340783005f58 HW requires Rx buffers to be 4 bytes aligned. Modify the driver to meet this requirement. Enable OFU rdy valid bug fix, to prevent hang in oful34_rx while there is back-pressure from host during RX. Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> 
HW requires Rx buffers to be 4 bytes aligned. Modify the driver to
meet this requirement.
Enable OFU rdy valid bug fix, to prevent hang in oful34_rx while
there is back-pressure from host during RX.

Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
wil6210: prevent FW download if HW is configured for secured boot 2018-07-31T08:02:00+00:00 Maya Erez merez@codeaurora.org 2018-07-24T07:44:39+00:00 d554edcd972d46179bf10258379e80f609bb52e5 Currently the driver doesn't support secured boot flow, hence prevent FW download in case HW is configured for such a flow. Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> 
Currently the driver doesn't support secured boot flow, hence
prevent FW download in case HW is configured for such a flow.

Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
wil6210: off channel transmit management frames in AP mode 2018-07-31T08:01:52+00:00 Ahmad Masri amasri@codeaurora.org 2018-07-24T07:44:38+00:00 b698e2dfc24cd148ce32f622a20938037ebe06b7 Currently wil6210 ignores the channel field in the cfg80211_mgmt_tx_params struct for wil_cfg80211_ops mgmt_tx operation and sends all management frames on the serving channel. Add support for off-channel transmission of management frames (WIPHY_FLAG_OFFCHAN_TX) in AP mode. This is useful in enterprise APs for sending custom probe request frames. Signed-off-by: Ahmad Masri <amasri@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> 
Currently wil6210 ignores the channel field in the
cfg80211_mgmt_tx_params struct for wil_cfg80211_ops mgmt_tx operation
and sends all management frames on the serving channel.

Add support for off-channel transmission of management frames
(WIPHY_FLAG_OFFCHAN_TX) in AP mode. This is useful in enterprise APs
for sending custom probe request frames.

Signed-off-by: Ahmad Masri <amasri@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
wil6210: align to latest auto generated wmi.h 2018-07-31T08:01:44+00:00 Ahmad Masri amasri@codeaurora.org 2018-07-24T07:44:37+00:00 6a363e8aa3828621eb4bc5e506f35f6ca9016d57 Align to latest version of the auto generated wmi file describing the interface with FW. Signed-off-by: Ahmad Masri <amasri@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> 
Align to latest version of the auto generated wmi file
describing the interface with FW.

Signed-off-by: Ahmad Masri <amasri@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
wil6210: set default 3-MSI 2018-07-31T08:01:35+00:00 Alexei Avshalom Lazar ailizaro@codeaurora.org 2018-07-24T07:44:36+00:00 7f10f8ba02207af13db0c33fa97e5904ec3ea39e Single MSI is the current default configuration. With multiple MSI interrupts configuration, Tx/Rx processing could run in parallel on different CPU cores and allow better balance between the cores. Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> 
Single MSI is the current default configuration.
With multiple MSI interrupts configuration, Tx/Rx processing could
run in parallel on different CPU cores and allow better balance
between the cores.

Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
wil6210: support Talyn specific board file 2018-07-31T08:01:26+00:00 Maya Erez merez@codeaurora.org 2018-07-24T07:44:35+00:00 631d3b4f7eeb76ffb865ff7805b495b50ee623f8 FW file name for Talyn device can be different from the default name. In such a case use a corresponding board file name. If such a board file is not present FW download procedure will fail. Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> 
FW file name for Talyn device can be different from the default name.
In such a case use a corresponding board file name.
If such a board file is not present FW download procedure will fail.

Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
wil6210: increase firmware ready timeout 2018-07-31T08:01:17+00:00 Hamad Kadmany hkadmany@codeaurora.org 2018-07-24T07:44:34+00:00 6ccae584014ef7074359eb4151086beef66ecfa9 Firmware ready event may take longer than current timeout in some scenarios, for example with multiple RFs connected where each requires an initial calibration. Increase the timeout to support these scenarios. Signed-off-by: Hamad Kadmany <hkadmany@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> 
Firmware ready event may take longer than
current timeout in some scenarios, for example
with multiple RFs connected where each
requires an initial calibration.

Increase the timeout to support these scenarios.

Signed-off-by: Hamad Kadmany <hkadmany@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>