linux-stable.git/drivers/net/wireless/ath, branch linux-6.17.y Linux kernel stable tree wifi: ath12k: Fix timeout error during beacon stats retrieval 2025-12-18T12:59:35+00:00 Manish Dharanenthiran manish.dharanenthiran@oss.qualcomm.com 2025-10-31T03:07:46+00:00 ad2ec6f927684a9dabff3022b376fc1b65d1859d [ Upstream commit 2977567b244f056d86658160659f06cd6c78ba3d ] Currently, for beacon_stats, ath12k_mac_get_fw_stats() is called for each started BSS on the specified hardware. ath12k_mac_get_fw_stats() will wait for the fw_stats_done completion after fetching the requested data from firmware. For the beacon_stats, fw_stats_done completion will be set only when stats are received for all BSSes. However, for other stats like vdev_stats or pdev_stats, there is one request to the firmware for all enabled BSSes. Since beacon_stats is fetched individually for all BSSes enabled in that pdev, waiting for the completion event results in a timeout error when multiple BSSes are enabled. Avoid this by completing the fw_stats_done immediately after updating the requested BSS's beacon stats in the list. Subsequently, this list will be used to display the beacon stats for all enabled BSSes in the requested pdev. Additionally, remove 'num_bcn_recvd' from the ath12k_fw_stats struct as it is no longer needed. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Fixes: 9fe4669ae919 ("wifi: ath12k: Request beacon stats from firmware") Signed-off-by: Manish Dharanenthiran <manish.dharanenthiran@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Link: https://patch.msgid.link/20251031-beacon_stats-v1-2-f52fce7b03ac@qti.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 2977567b244f056d86658160659f06cd6c78ba3d ]

Currently, for beacon_stats, ath12k_mac_get_fw_stats() is called
for each started BSS on the specified hardware.
ath12k_mac_get_fw_stats() will wait for the fw_stats_done completion
after fetching the requested data from firmware. For the beacon_stats,
fw_stats_done completion will be set only when stats are received for
all BSSes. However, for other stats like vdev_stats or pdev_stats, there
is one request to the firmware for all enabled BSSes. Since beacon_stats
is fetched individually for all BSSes enabled in that pdev, waiting for
the completion event results in a timeout error when multiple BSSes are
enabled.

Avoid this by completing the fw_stats_done immediately after
updating the requested BSS's beacon stats in the list. Subsequently,
this list will be used to display the beacon stats for all enabled
BSSes in the requested pdev.

Additionally, remove 'num_bcn_recvd' from the ath12k_fw_stats struct
as it is no longer needed.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1

Fixes: 9fe4669ae919 ("wifi: ath12k: Request beacon stats from firmware")
Signed-off-by: Manish Dharanenthiran <manish.dharanenthiran@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251031-beacon_stats-v1-2-f52fce7b03ac@qti.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
wifi: ath12k: unassign arvif on scan vdev create failure 2025-12-18T12:59:30+00:00 Rameshkumar Sundaram rameshkumar.sundaram@oss.qualcomm.com 2025-10-26T18:22:54+00:00 cd1aa4114c73ba0ae553e21ecbb2275f9e5aed44 [ Upstream commit e70515039d44be61b6a73aafb401d141b0034d12 ] During scan and remain-on-channel requests, a scan link vif (arvif) is assigned and a temporary vdev is created. If vdev creation fails, the assigned arvif is left attached until the virtual interface is removed, leaving a stale link in ahvif. Fix this by freeing the stale arvif and resetting the corresponding link in ahvif by calling ath12k_mac_unassign_link_vif() when vdev creation fails. While at it, propagate the actual error code from ath12k_mac_vdev_create() instead of returning -EINVAL in ath12k_mac_initiate_hw_scan(). Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Fixes: 477cabfdb776 ("wifi: ath12k: modify link arvif creation and removal for MLO") Signed-off-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20251026182254.1399650-3-rameshkumar.sundaram@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit e70515039d44be61b6a73aafb401d141b0034d12 ]

During scan and remain-on-channel requests, a scan link vif (arvif) is
assigned and a temporary vdev is created. If vdev creation fails, the
assigned arvif is left attached until the virtual interface is removed,
leaving a stale link in ahvif.

Fix this by freeing the stale arvif and resetting the corresponding link in
ahvif by calling ath12k_mac_unassign_link_vif() when vdev creation fails.

While at it, propagate the actual error code from ath12k_mac_vdev_create()
instead of returning -EINVAL in ath12k_mac_initiate_hw_scan().

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1

Fixes: 477cabfdb776 ("wifi: ath12k: modify link arvif creation and removal for MLO")
Signed-off-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20251026182254.1399650-3-rameshkumar.sundaram@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
wifi: ath12k: fix error handling in creating hardware group 2025-12-18T12:59:29+00:00 Baochen Qiang baochen.qiang@oss.qualcomm.com 2025-10-30T02:08:43+00:00 eb1398c40b10b6f69591c1d9156c6a85ba0967ca [ Upstream commit 088a099690e4c0d291db505013317ab5dd58b4d5 ] In ath12k_core_init() when ath12k_core_hw_group_create() fails, ath12k_core_hw_group_destroy() is called where for each device below path would get executed ath12k_core_soc_destroy() ath12k_qmi_deinit_service() qmi_handle_release() This results in kernel crash in case one of the device fails at qmi_handle_init() when creating hardware group: ath12k_pci 0000:10:00.0: failed to initialize qmi handle ath12k_pci 0000:10:00.0: failed to initialize qmi :-517 ath12k_pci 0000:10:00.0: failed to create soc core: -517 ath12k_pci 0000:10:00.0: unable to create hw group BUG: unable to handle page fault for address: ffffffffffffffb7 RIP: 0010:qmi_handle_release Call Trace: <TASK> ath12k_qmi_deinit_service ath12k_core_hw_group_destroy ath12k_core_init ath12k_pci_probe The detailed reason is, when qmi_handle_init() fails for a device ab->qmi.handle is not correctly initialized. Then ath12k_core_hw_group_create() returns failure, since error handing is done for all device, eventually qmi_handle_release() is called for the issue device and finally kernel crashes due to the uninitialized ab->qmi.handle. Fix this by moving error handling to ath12k_core_hw_group_create(), this way the issue device can be skipped. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284.1-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Fixes: 6f245ea0ec6c ("wifi: ath12k: introduce device group abstraction") Link: https://lore.kernel.org/ath12k/fabc97122016d1a66a53ddedd965d134@posteo.net Reported-by: a-development <a-development@posteo.de> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220518 Tested-by: a-development <a-development@posteo.de> Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20251030-fix-hw-group-create-err-handling-v1-1-0659e4d15fb9@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 088a099690e4c0d291db505013317ab5dd58b4d5 ]

In ath12k_core_init() when ath12k_core_hw_group_create() fails,
ath12k_core_hw_group_destroy() is called where for each device below
path would get executed

	ath12k_core_soc_destroy()
		ath12k_qmi_deinit_service()
			qmi_handle_release()

This results in kernel crash in case one of the device fails at
qmi_handle_init() when creating hardware group:

ath12k_pci 0000:10:00.0: failed to initialize qmi handle
ath12k_pci 0000:10:00.0: failed to initialize qmi :-517
ath12k_pci 0000:10:00.0: failed to create soc core: -517
ath12k_pci 0000:10:00.0: unable to create hw group
BUG: unable to handle page fault for address: ffffffffffffffb7
RIP: 0010:qmi_handle_release
Call Trace:
 <TASK>
 ath12k_qmi_deinit_service
 ath12k_core_hw_group_destroy
 ath12k_core_init
 ath12k_pci_probe

The detailed reason is, when qmi_handle_init() fails for a device
ab->qmi.handle is not correctly initialized. Then
ath12k_core_hw_group_create() returns failure, since error handing
is done for all device, eventually qmi_handle_release() is called for the
issue device and finally kernel crashes due to the uninitialized
ab->qmi.handle.

Fix this by moving error handling to ath12k_core_hw_group_create(), this
way the issue device can be skipped.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284.1-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

Fixes: 6f245ea0ec6c ("wifi: ath12k: introduce device group abstraction")
Link: https://lore.kernel.org/ath12k/fabc97122016d1a66a53ddedd965d134@posteo.net
Reported-by: a-development <a-development@posteo.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220518
Tested-by: a-development <a-development@posteo.de>
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20251030-fix-hw-group-create-err-handling-v1-1-0659e4d15fb9@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
wifi: ath12k: fix reusing m3 memory 2025-12-18T12:59:29+00:00 Baochen Qiang baochen.qiang@oss.qualcomm.com 2025-10-29T02:07:14+00:00 3da5a878cd3410c12f6e0aac976517ab3440e27f [ Upstream commit 00575bb44b2c2aa53d0a768de2b80c9c1af0174d ] During firmware recovery or suspend/resume, m3 memory could be reused if the size of the new m3 binary is equal to or less than that of the existing memory. There will be issues for the latter case, since m3_mem->size will be updated with a smaller value and this value is eventually used in the free path, where the original total size should be used instead. To fix it, add a new member in m3_mem_region structure to track the original memory size and use it in free path. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3 Fixes: 05090ae82f44 ("wifi: ath12k: check M3 buffer size as well whey trying to reuse it") Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20251029-ath12k-fix-m3-reuse-v1-1-69225bacfc5d@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 00575bb44b2c2aa53d0a768de2b80c9c1af0174d ]

During firmware recovery or suspend/resume, m3 memory could be reused if
the size of the new m3 binary is equal to or less than that of the
existing memory. There will be issues for the latter case, since
m3_mem->size will be updated with a smaller value and this value is
eventually used in the free path, where the original total size should be
used instead.

To fix it, add a new member in m3_mem_region structure to track the original
memory size and use it in free path.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3

Fixes: 05090ae82f44 ("wifi: ath12k: check M3 buffer size as well whey trying to reuse it")
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20251029-ath12k-fix-m3-reuse-v1-1-69225bacfc5d@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
wifi: ath12k: fix potential memory leak in ath12k_wow_arp_ns_offload() 2025-12-18T12:59:29+00:00 Abdun Nihaal nihaal@cse.iitm.ac.in 2025-10-28T17:04:55+00:00 b52da864aed8a3f801530a9cf56fab72b8900668 [ Upstream commit be5febd51c478bc8e24ad3480435f2754a403b14 ] When the call to ath12k_wmi_arp_ns_offload() fails, the temporary memory allocation for offload is not freed before returning. Fix that by freeing offload in the error path. Fixes: 1666108c74c4 ("wifi: ath12k: support ARP and NS offload") Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in> Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Link: https://patch.msgid.link/20251028170457.134608-1-nihaal@cse.iitm.ac.in Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit be5febd51c478bc8e24ad3480435f2754a403b14 ]

When the call to ath12k_wmi_arp_ns_offload() fails, the temporary memory
allocation for offload is not freed before returning. Fix that by
freeing offload in the error path.

Fixes: 1666108c74c4 ("wifi: ath12k: support ARP and NS offload")
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251028170457.134608-1-nihaal@cse.iitm.ac.in
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
wifi: ath12k: restore register window after global reset 2025-12-18T12:59:23+00:00 Baochen Qiang baochen.qiang@oss.qualcomm.com 2025-10-17T02:36:36+00:00 8061eb96851a333c50809fa18fd2845d1c1923d1 [ Upstream commit a41281f6518e485220d180a6031d302a736fc463 ] Hardware target implements an address space larger than that PCI BAR can map. In order to be able to access the whole target address space, the BAR space is split into 4 segments, of which the last 3, called windows, can be dynamically mapped to the desired area. This is achieved by updating WINDOW_REG_ADDRESS register with appropriate window value. Currently each time when accessing a register that beyond WINDOW_START, host calculates the window value and caches it after window update, this way next time when accessing a register falling in the same window, host knows that the window is already good hence no additional update needed. However this mechanism breaks after global reset is triggered in ath12k_pci_soc_global_reset(), because with global reset hardware resets WINDOW_REG_ADDRESS register hence the window is not properly mapped any more. Current host does nothing about this, as a result a subsequent register access may not work as expected if it falls in a window same as before. Although there is no obvious issue seen now, better to fix it to avoid future problem. The fix is done by restoring the window register after global reset. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284.1-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20251017-ath12k-reset-window-cache-v1-1-29e0e751deed@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit a41281f6518e485220d180a6031d302a736fc463 ]

Hardware target implements an address space larger than that PCI BAR can
map. In order to be able to access the whole target address space, the
BAR space is split into 4 segments, of which the last 3, called windows,
can be dynamically mapped to the desired area. This is achieved by
updating WINDOW_REG_ADDRESS register with appropriate window value.
Currently each time when accessing a register that beyond WINDOW_START,
host calculates the window value and caches it after window update,
this way next time when accessing a register falling in the same window,
host knows that the window is already good hence no additional update
needed.

However this mechanism breaks after global reset is triggered in
ath12k_pci_soc_global_reset(), because with global reset hardware resets
WINDOW_REG_ADDRESS register hence the window is not properly mapped any
more. Current host does nothing about this, as a result a subsequent
register access may not work as expected if it falls in a window same as
before.

Although there is no obvious issue seen now, better to fix it to avoid
future problem. The fix is done by restoring the window register after
global reset.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284.1-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20251017-ath12k-reset-window-cache-v1-1-29e0e751deed@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
wifi: ath11k: fix peer HE MCS assignment 2025-12-18T12:59:22+00:00 Baochen Qiang baochen.qiang@oss.qualcomm.com 2025-10-17T01:49:00+00:00 381096a417b7019896e93e86f4c585c592bf98e2 [ Upstream commit 4a013ca2d490c73c40588d62712ffaa432046a04 ] In ath11k_wmi_send_peer_assoc_cmd(), peer's transmit MCS is sent to firmware as receive MCS while peer's receive MCS sent as transmit MCS, which goes against firmwire's definition. While connecting to a misbehaved AP that advertises 0xffff (meaning not supported) for 160 MHz transmit MCS map, firmware crashes due to 0xffff is assigned to he_mcs->rx_mcs_set field. Ext Tag: HE Capabilities [...] Supported HE-MCS and NSS Set [...] Rx and Tx MCS Maps 160 MHz [...] Tx HE-MCS Map 160 MHz: 0xffff Swap the assignment to fix this issue. As the HE rate control mask is meant to limit our own transmit MCS, it needs to go via he_mcs->rx_mcs_set field. With the aforementioned swapping done, change is needed as well to apply it to the peer's receive MCS. Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.41 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Fixes: 61fe43e7216d ("ath11k: add support for setting fixed HE rate/gi/ltf") Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20251017-ath11k-mcs-assignment-v1-2-da40825c1783@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 4a013ca2d490c73c40588d62712ffaa432046a04 ]

In ath11k_wmi_send_peer_assoc_cmd(), peer's transmit MCS is sent to
firmware as receive MCS while peer's receive MCS sent as transmit MCS,
which goes against firmwire's definition.

While connecting to a misbehaved AP that advertises 0xffff (meaning not
supported) for 160 MHz transmit MCS map, firmware crashes due to 0xffff
is assigned to he_mcs->rx_mcs_set field.

	Ext Tag: HE Capabilities
	    [...]
	    Supported HE-MCS and NSS Set
		[...]
	        Rx and Tx MCS Maps 160 MHz
		    [...]
	            Tx HE-MCS Map 160 MHz: 0xffff

Swap the assignment to fix this issue.

As the HE rate control mask is meant to limit our own transmit MCS, it
needs to go via he_mcs->rx_mcs_set field. With the aforementioned swapping
done, change is needed as well to apply it to the peer's receive MCS.

Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.41
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1

Fixes: 61fe43e7216d ("ath11k: add support for setting fixed HE rate/gi/ltf")
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20251017-ath11k-mcs-assignment-v1-2-da40825c1783@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
wifi: ath11k: fix VHT MCS assignment 2025-12-18T12:59:22+00:00 Baochen Qiang baochen.qiang@oss.qualcomm.com 2025-10-17T01:48:59+00:00 07068825930ed29f3132462f1156b3abc2295139 [ Upstream commit 47d0cd6bccb4604192633cc8d29511e85d811fc0 ] While associating, firmware needs to know peer's receive capability to calculate its own VHT transmit MCS, currently host sends this information to firmware via mcs->rx_mcs_set field, this is wrong as firmware actually takes it from mcs->tx_mcs_set field. Till now there is no failure seen due to this, most likely because almost all peers are advertising the same capability for both transmit and receive. Swap the assignment to fix it. Besides, rate control mask is meant to limit our own transmit MCS, hence need to go via mcs->tx_mcs_set field. With the aforementioned swapping done, change is needed as well to apply it to the peer's receive capability rather than transmit capability. Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.41 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20251017-ath11k-mcs-assignment-v1-1-da40825c1783@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 47d0cd6bccb4604192633cc8d29511e85d811fc0 ]

While associating, firmware needs to know peer's receive capability to
calculate its own VHT transmit MCS, currently host sends this information
to firmware via mcs->rx_mcs_set field, this is wrong as firmware actually
takes it from mcs->tx_mcs_set field. Till now there is no failure seen
due to this, most likely because almost all peers are advertising the
same capability for both transmit and receive. Swap the assignment to
fix it.

Besides, rate control mask is meant to limit our own transmit MCS, hence
need to go via mcs->tx_mcs_set field. With the aforementioned swapping
done, change is needed as well to apply it to the peer's receive
capability rather than transmit capability.

Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.41
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1

Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20251017-ath11k-mcs-assignment-v1-1-da40825c1783@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
wifi: ath12k: fix TX and RX MCS rate configurations in HE mode 2025-12-18T12:59:16+00:00 Pradeep Kumar Chitrapu quic_pradeepc@quicinc.com 2025-10-09T21:16:56+00:00 31d3c519ff01c6e110c00b54ef06f6b5281785ae [ Upstream commit 9c5f229b1312a31aff762b2111f6751e4e3722fe ] Currently, the TX and RX MCS rate configurations per peer are reversed when sent to the firmware. As a result, RX MCS rates are configured for TX, and vice versa. This commit rectifies the configuration to match what the firmware expects. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Link: https://patch.msgid.link/20251009211656.2386085-3-quic_pradeepc@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 9c5f229b1312a31aff762b2111f6751e4e3722fe ]

Currently, the TX and RX MCS rate configurations per peer are
reversed when sent to the firmware. As a result, RX MCS rates
are configured for TX, and vice versa. This commit rectifies
the configuration to match what the firmware expects.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251009211656.2386085-3-quic_pradeepc@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
wifi: ath12k: fix VHT MCS assignment 2025-12-18T12:59:16+00:00 Baochen Qiang baochen.qiang@oss.qualcomm.com 2025-10-09T21:16:55+00:00 6e062ec45818e89393c4b31731a19f936b19a78c [ Upstream commit 8c21b32c2cc82224c7fc1a9f67318f3b1199744b ] While associating, firmware needs the peer's receive capability to calculate its own VHT transmit MCS. Currently, the host sends this information via mcs->rx_mcs_set field, but firmware actually reads it from mcs->tx_mcs_set field. This mismatch is incorrect. This issue has not caused failures so far because most peers advertise identical TX and RX capabilities. Fix this by assigning the value to tx_mcs_set as expected. Additionally, the rate control mask is intended to limit our transmit MCS, so it should also apply to the peer's receive capability. Update the logic accordingly. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Link: https://patch.msgid.link/20251009211656.2386085-2-quic_pradeepc@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 8c21b32c2cc82224c7fc1a9f67318f3b1199744b ]

While associating, firmware needs the peer's receive capability
to calculate its own VHT transmit MCS. Currently, the host
sends this information via mcs->rx_mcs_set field, but firmware
actually reads it from mcs->tx_mcs_set field. This mismatch is
incorrect.

This issue has not caused failures so far because most peers
advertise identical TX and RX capabilities. Fix this by
assigning the value to tx_mcs_set as expected.

Additionally, the rate control mask is intended to limit our
transmit MCS, so it should also apply to the peer's receive
capability. Update the logic accordingly.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251009211656.2386085-2-quic_pradeepc@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>