linux-stable.git/drivers/net/wireless/ath/dfs_pattern_detector.c, branch linux-4.2.y Linux kernel stable tree Merge ath-next from ath.git 2015-04-28T11:44:19+00:00 Kalle Valo kvalo@codeaurora.org 2015-04-28T11:43:54+00:00 73b25f66dcae45d74e1641c52a3d96d041788e4e Major changes in ath10k: * enable channel 144 on 5 GHz * enable Adaptive Noise Immunity (ANI) by default * add Wake on Wireless LAN (WOW) patterns support * add basic Tunneled Direct Link Setup (TDLS) support * add multi-channel support for QCA6174 * enable IBSS RSN support * enable Bluetooth Coexistance whenever firmware supports it * add more versatile way to set bitrates used by the firmware 
Major changes in ath10k:

* enable channel 144 on 5 GHz
* enable Adaptive Noise Immunity (ANI) by default
* add Wake on Wireless LAN (WOW) patterns support
* add basic Tunneled Direct Link Setup (TDLS) support
* add multi-channel support for QCA6174
* enable IBSS RSN support
* enable Bluetooth Coexistance whenever firmware supports it
* add more versatile way to set bitrates used by the firmware
ath: lower JP W53 band DFS detection threshold around 30% 2015-04-15T12:15:12+00:00 Peter Oh poh@qca.qualcomm.com 2015-03-31T23:44:43+00:00 26bea13a65654b21b224a47daf02827c79302f2e Japan's W53 band requires 50% data traffic during its DFS test, but WLAN baseband used by ath9k and ath10k is not able to achieve current threshold rate, 50%, under the data traffic rate. In other words, HW occasionally fails detecting radar pulses, so that SW cannot get enough radar reports to achieve the rate. Signed-off-by: Peter Oh <poh@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> 
Japan's W53 band requires 50% data traffic during its DFS test,
but WLAN baseband used by ath9k and ath10k is not able to achieve
current threshold rate, 50%, under the data traffic rate.
In other words, HW occasionally fails detecting radar pulses,
so that SW cannot get enough radar reports to achieve the rate.

Signed-off-by: Peter Oh <poh@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
ath: define JP DFS patterns separated from FCC 2015-04-15T12:15:00+00:00 Peter Oh poh@qca.qualcomm.com 2015-03-31T23:44:42+00:00 cb3fbd63575cca6cff60222b5a51cc3bebe866ee Separate Japan's DFS pattern from FCC to control PPB threshold. Currently all the radar detectors use the same threshold rate at 50%, but it's not able to achieve if data traffic rate is higher than 40% because WLAN baseband used by ath9k and ath10k often fails detecting radar pulses, so that SW cannot get enough radar reports to achieve the rate. Since Japan's W53 band requires 50% data traffic during its DFS test we need to apply different threshold rate than others on it. Hence define its own pattern to give flexibility to threshold rate. Signed-off-by: Peter Oh <poh@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> 
Separate Japan's DFS pattern from FCC to control PPB threshold.

Currently all the radar detectors use the same threshold rate at
50%, but it's not able to achieve if data traffic rate is higher
than 40% because WLAN baseband used by ath9k and ath10k often fails
detecting radar pulses, so that SW cannot get enough radar reports
to achieve the rate.

Since Japan's W53 band requires 50% data traffic during its DFS
test we need to apply different threshold rate than others on it.
Hence define its own pattern to give flexibility to threshold rate.

Signed-off-by: Peter Oh <poh@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
ath: support new FCC DFS Radar Type 1 2015-04-15T12:00:16+00:00 Peter Oh poh@qca.qualcomm.com 2015-04-09T15:50:10+00:00 694c0e0a177783ebf302f462237daa1e2f254025 Add support for new FCC DFS rules released on August 14, 2014. FCC has added a new radar type named Radar Type 1 and original Radar Type 1 is renamed to Radar Type 0 in consequence. During the certificate test, Type 1 PRI values are randomly selected within the range of 518 and 3066 and we divide it to 3 groups based on practical test result data collected for more than a year. For about Radar type ID, it does nothing to functionalities. In other words, even if we re-order the IDs, DFS detection will work as well, but we give the ID with matching to FCC doc. By adding this support, the drivers using this DFS function are able to support both of old and new FCC DFS rules simultaneously without any other changes. Signed-off-by: Peter Oh <poh@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> 
Add support for new FCC DFS rules released on August 14, 2014.
FCC has added a new radar type named Radar Type 1 and original
Radar Type 1 is renamed to Radar Type 0 in consequence.

During the certificate test, Type 1 PRI values are randomly selected
within the range of 518 and 3066 and we divide it to 3 groups based on
practical test result data collected for more than a year.

For about Radar type ID, it does nothing to functionalities.
In other words, even if we re-order the IDs, DFS detection will
work as well, but we give the ID with matching to FCC doc.

By adding this support, the drivers using this DFS function are
able to support both of old and new FCC DFS rules simultaneously
without any other changes.

Signed-off-by: Peter Oh <poh@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
ath9k: restart only triggering DFS detector line 2015-03-16T15:53:05+00:00 Zefir Kurtisi zefir.kurtisi@neratec.com 2015-03-10T16:49:29+00:00 8252a35ab4f6ee703977f527296dc42ee9486ce2 To support HT40 DFS mode, a triggering detector must reset only itself but not other detector lines. Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> 
To support HT40 DFS mode, a triggering detector must
reset only itself but not other detector lines.

Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
ath: introduce chirp parameter used by DFS 2015-03-05T13:55:16+00:00 Peter Oh poh@qca.qualcomm.com 2015-03-04T13:43:45+00:00 beb28edf02115a79d1bb947a01a6ca80b2aadabd Some of radar types such as FCC radar type 5 require to look up chirp in pulse to detect genuine radar and it will prevent DFS channels from false radar detection. Signed-off-by: Peter Oh <poh@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> 
Some of radar types such as FCC radar type 5 require
to look up chirp in pulse to detect genuine radar and
it will prevent DFS channels from false radar detection.

Signed-off-by: Peter Oh <poh@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
ath: fix incorrect PPB on FCC radar type 5 2014-12-24T15:28:28+00:00 Peter Oh poh@qca.qualcomm.com 2014-12-15T18:55:34+00:00 a844bae38bf8c07ce18944d8b3d484911d75c8dd The minimum number of pulses per burst on FCC radar type 5 is 1. Use this number for correct radar detection. Signed-off-by: Peter Oh <poh@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> 
The minimum number of pulses per burst on FCC radar type 5 is 1.
Use this number for correct radar detection.

Signed-off-by: Peter Oh <poh@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
ath: Fix a false radar detection pattern 2014-11-24T21:51:24+00:00 Vivek Natarajan nataraja@qti.qualcomm.com 2014-11-24T11:56:22+00:00 34b5d778b583104d91534b4673472b7820e0c0b3 For FCC and JP, in one of the radar patterns, PPB and PRF seems to be interchanged leading to frequent incorrect radar detections. Signed-off-by: Vivek Natarajan <nataraja@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> 
For FCC and JP, in one of the radar patterns, PPB and PRF seems to be
interchanged leading to frequent incorrect radar detections.

Signed-off-by: Vivek Natarajan <nataraja@qti.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
ath: add JP DFS pattern detector 2014-05-16T18:26:53+00:00 Janusz Dziedzic janusz.dziedzic@tieto.com 2014-05-13T10:32:06+00:00 89ce4f65f4d18bf867ddc2586665b6620bded8b9 Add initial values for JP DFS pattern detector. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> 
Add initial values for JP DFS pattern detector.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
ath: add DFS FCC pattern detector 2014-05-16T18:26:53+00:00 Janusz Dziedzic janusz.dziedzic@tieto.com 2014-05-13T10:32:05+00:00 f12e3e038f1ee58dc46fb069f6df88a0f9460ab8 Add initial values for DFS FCC pattern detector. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Tested-by: Bartosz Markowski <bartosz.markowski@tieto.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> 
Add initial values for DFS FCC pattern detector.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
Tested-by: Bartosz Markowski <bartosz.markowski@tieto.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>