linux-stable.git/drivers/net/wan, branch linux-4.9.y

net: farsync: Fix kmemleak when rmmods farsync

2023-01-07T11:07:21+00:00

[ Upstream commit 2f623aaf9f31de968dea6169849706a2f9be444c ]

There are two memory leaks reported by kmemleak:

  unreferenced object 0xffff888114b20200 (size 128):
    comm "modprobe", pid 4846, jiffies 4295146524 (age 401.345s)
    hex dump (first 32 bytes):
      e0 62 57 09 81 88 ff ff e0 62 57 09 81 88 ff ff  .bW......bW.....
      01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    backtrace:
      [] kmalloc_trace+0x22/0x60
      [] __hw_addr_add_ex+0x198/0x6c0
      [] dev_addr_init+0x13d/0x230
      [] alloc_netdev_mqs+0x10d/0xe50
      [] alloc_hdlcdev+0x2e/0x80
      [] fst_add_one+0x601/0x10e0 [farsync]
      ...

  unreferenced object 0xffff88810b85b000 (size 1024):
    comm "modprobe", pid 4846, jiffies 4295146523 (age 401.346s)
    hex dump (first 32 bytes):
      00 00 b0 02 00 c9 ff ff 00 70 0a 00 00 c9 ff ff  .........p......
      00 00 00 f2 00 00 00 f3 0a 00 00 00 02 00 00 00  ................
    backtrace:
      [] kmalloc_trace+0x22/0x60
      [] fst_add_one+0x154/0x10e0 [farsync]
      [] local_pci_probe+0xd3/0x170
      ...

The root cause is traced to the netdev and fst_card_info are not freed
when removes one fst in fst_remove_one(), which may trigger oom if
repeated insmod and rmmod module.

Fix it by adding free_netdev() and kfree() in fst_remove_one(), just as
the operations on the error handling path in fst_add_one().

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Li Zetao 
Reviewed-by: Jiri Pirko 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

net: lapbether: fix issue of dev reference count leakage in lapbeth_device_event()

2022-11-25T16:35:35+00:00

[ Upstream commit 531705a765493655472c993627106e19f7e5a6d2 ]

When following tests are performed, it will cause dev reference counting
leakage.
a)ip link add bond2 type bond mode balance-rr
b)ip link set bond2 up
c)ifenslave -f bond2 rose1
d)ip link del bond2

When new bond device is created, the default type of the bond device is
ether. And the bond device is up, lapbeth_device_event() receives the
message and creates a new lapbeth device. In this case, the reference
count value of dev is hold once. But after "ifenslave -f bond2 rose1"
command is executed, the type of the bond device is changed to rose. When
the bond device is unregistered, lapbeth_device_event() will not put the
dev reference count.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Zhengchao Shao 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

net: lapbether: Prevent racing when checking whether the netif is running

2021-05-22T08:40:26+00:00

[ Upstream commit 5acd0cfbfbb5a688da1bfb1a2152b0c855115a35 ]

There are two "netif_running" checks in this driver. One is in
"lapbeth_xmit" and the other is in "lapbeth_rcv". They serve to make
sure that the LAPB APIs called in these functions are called before
"lapb_unregister" is called by the "ndo_stop" function.

However, these "netif_running" checks are unreliable, because it's
possible that immediately after "netif_running" returns true, "ndo_stop"
is called (which causes "lapb_unregister" to be called).

This patch adds locking to make sure "lapbeth_xmit" and "lapbeth_rcv" can
reliably check and ensure the netif is running while doing their work.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Xie He 
Acked-by: Martin Schiller 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

net: wan/lmc: unregister device when no matching device is found

2021-04-07T10:05:40+00:00

[ Upstream commit 62e69bc419772638369eff8ff81340bde8aceb61 ]

lmc set sc->lmc_media pointer when there is a matching device.
However, when no matching device is found, this pointer is NULL
and the following dereference will result in a null-ptr-deref.

To fix this issue, unregister the hdlc device and return an error.

[    4.569359] BUG: KASAN: null-ptr-deref in lmc_init_one.cold+0x2b6/0x55d [lmc]
[    4.569748] Read of size 8 at addr 0000000000000008 by task modprobe/95
[    4.570102]
[    4.570187] CPU: 0 PID: 95 Comm: modprobe Not tainted 5.11.0-rc7 #94
[    4.570527] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-48-gd9c812dda519-preb4
[    4.571125] Call Trace:
[    4.571261]  dump_stack+0x7d/0xa3
[    4.571445]  kasan_report.cold+0x10c/0x10e
[    4.571667]  ? lmc_init_one.cold+0x2b6/0x55d [lmc]
[    4.571932]  lmc_init_one.cold+0x2b6/0x55d [lmc]
[    4.572186]  ? lmc_mii_readreg+0xa0/0xa0 [lmc]
[    4.572432]  local_pci_probe+0x6f/0xb0
[    4.572639]  pci_device_probe+0x171/0x240
[    4.572857]  ? pci_device_remove+0xe0/0xe0
[    4.573080]  ? kernfs_create_link+0xb6/0x110
[    4.573315]  ? sysfs_do_create_link_sd.isra.0+0x76/0xe0
[    4.573598]  really_probe+0x161/0x420
[    4.573799]  driver_probe_device+0x6d/0xd0
[    4.574022]  device_driver_attach+0x82/0x90
[    4.574249]  ? device_driver_attach+0x90/0x90
[    4.574485]  __driver_attach+0x60/0x100
[    4.574694]  ? device_driver_attach+0x90/0x90
[    4.574931]  bus_for_each_dev+0xe1/0x140
[    4.575146]  ? subsys_dev_iter_exit+0x10/0x10
[    4.575387]  ? klist_node_init+0x61/0x80
[    4.575602]  bus_add_driver+0x254/0x2a0
[    4.575812]  driver_register+0xd3/0x150
[    4.576021]  ? 0xffffffffc0018000
[    4.576202]  do_one_initcall+0x84/0x250
[    4.576411]  ? trace_event_raw_event_initcall_finish+0x150/0x150
[    4.576733]  ? unpoison_range+0xf/0x30
[    4.576938]  ? ____kasan_kmalloc.constprop.0+0x84/0xa0
[    4.577219]  ? unpoison_range+0xf/0x30
[    4.577423]  ? unpoison_range+0xf/0x30
[    4.577628]  do_init_module+0xf8/0x350
[    4.577833]  load_module+0x3fe6/0x4340
[    4.578038]  ? vm_unmap_ram+0x1d0/0x1d0
[    4.578247]  ? ____kasan_kmalloc.constprop.0+0x84/0xa0
[    4.578526]  ? module_frob_arch_sections+0x20/0x20
[    4.578787]  ? __do_sys_finit_module+0x108/0x170
[    4.579037]  __do_sys_finit_module+0x108/0x170
[    4.579278]  ? __ia32_sys_init_module+0x40/0x40
[    4.579523]  ? file_open_root+0x200/0x200
[    4.579742]  ? do_sys_open+0x85/0xe0
[    4.579938]  ? filp_open+0x50/0x50
[    4.580125]  ? exit_to_user_mode_prepare+0xfc/0x130
[    4.580390]  do_syscall_64+0x33/0x40
[    4.580586]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[    4.580859] RIP: 0033:0x7f1a724c3cf7
[    4.581054] Code: 48 89 57 30 48 8b 04 24 48 89 47 38 e9 1d a0 02 00 48 89 f8 48 89 f7 48 89 d6 48 891
[    4.582043] RSP: 002b:00007fff44941c68 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[    4.582447] RAX: ffffffffffffffda RBX: 00000000012ada70 RCX: 00007f1a724c3cf7
[    4.582827] RDX: 0000000000000000 RSI: 00000000012ac9e0 RDI: 0000000000000003
[    4.583207] RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000001
[    4.583587] R10: 00007f1a72527300 R11: 0000000000000246 R12: 00000000012ac9e0
[    4.583968] R13: 0000000000000000 R14: 00000000012acc90 R15: 0000000000000001
[    4.584349] ==================================================================

Signed-off-by: Tong Zhang 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

net: wan: fix error return code of uhdlc_init()

2021-03-30T12:41:39+00:00

[ Upstream commit 62765d39553cfd1ad340124fe1e280450e8c89e2 ]

When priv->rx_skbuff or priv->tx_skbuff is NULL, no error return code of
uhdlc_init() is assigned.
To fix this bug, ret is assigned with -ENOMEM in these cases.

Reported-by: TOTE Robot 
Signed-off-by: Jia-Ju Bai 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

net: lapbether: Remove netif_start_queue / netif_stop_queue

2021-03-17T15:10:14+00:00

commit f7d9d4854519fdf4d45c70a4d953438cd88e7e58 upstream.

For the devices in this driver, the default qdisc is "noqueue",
because their "tx_queue_len" is 0.

In function "__dev_queue_xmit" in "net/core/dev.c", devices with the
"noqueue" qdisc are specially handled. Packets are transmitted without
being queued after a "dev->flags & IFF_UP" check. However, it's possible
that even if this check succeeds, "ops->ndo_stop" may still have already
been called. This is because in "__dev_close_many", "ops->ndo_stop" is
called before clearing the "IFF_UP" flag.

If we call "netif_stop_queue" in "ops->ndo_stop", then it's possible in
"__dev_queue_xmit", it sees the "IFF_UP" flag is present, and then it
checks "netif_xmit_stopped" and finds that the queue is already stopped.
In this case, it will complain that:
"Virtual device ... asks to queue packet!"

To prevent "__dev_queue_xmit" from generating this complaint, we should
not call "netif_stop_queue" in "ops->ndo_stop".

We also don't need to call "netif_start_queue" in "ops->ndo_open",
because after a netdev is allocated and registered, the
"__QUEUE_STATE_DRV_XOFF" flag is initially not set, so there is no need
to call "netif_start_queue" to clear it.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Xie He 
Acked-by: Martin Schiller 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

wan: ds26522: select CONFIG_BITREVERSE

2021-01-17T12:57:55+00:00

commit 69931e11288520c250152180ecf9b6ac5e6e40ed upstream.

Without this, the driver runs into a link failure

arm-linux-gnueabi-ld: drivers/net/wan/slic_ds26522.o: in function `slic_ds26522_probe':
slic_ds26522.c:(.text+0x100c): undefined reference to `byte_rev_table'
arm-linux-gnueabi-ld: slic_ds26522.c:(.text+0x1cdc): undefined reference to `byte_rev_table'
arm-linux-gnueabi-ld: drivers/net/wan/slic_ds26522.o: in function `slic_write':
slic_ds26522.c:(.text+0x1e4c): undefined reference to `byte_rev_table'

Fixes: c37d4a0085c5 ("Maxim/driver: Add driver for maxim ds26522")
Signed-off-by: Arnd Bergmann 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: hdlc_ppp: Fix issues when mod_timer is called while timer is running

2021-01-12T18:49:02+00:00

[ Upstream commit 1fef73597fa545c35fddc953979013882fbd4e55 ]

ppp_cp_event is called directly or indirectly by ppp_rx with "ppp->lock"
held. It may call mod_timer to add a new timer. However, at the same time
ppp_timer may be already running and waiting for "ppp->lock". In this
case, there's no need for ppp_timer to continue running and it can just
exit.

If we let ppp_timer continue running, it may call add_timer. This causes
kernel panic because add_timer can't be called with a timer pending.
This patch fixes this problem.

Fixes: e022c2f07ae5 ("WAN: new synchronous PPP implementation for generic HDLC.")
Cc: Krzysztof Halasa 
Signed-off-by: Xie He 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

cosa: Add missing kfree in error path of cosa_write

2020-11-18T17:26:27+00:00

[ Upstream commit 52755b66ddcef2e897778fac5656df18817b59ab ]

If memory allocation for 'kbuf' succeed, cosa_write() doesn't have a
corresponding kfree() in exception handling. Thus add kfree() for this
function implementation.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Hulk Robot 
Signed-off-by: Wang Hai 
Acked-by: Jan "Yenya" Kasprzak 
Link: https://lore.kernel.org/r/20201110144614.43194-1-wanghai38@huawei.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

drivers/net/wan/hdlc_fr: Correctly handle special skb->protocol values

2020-11-10T09:23:54+00:00

[ Upstream commit 8306266c1d51aac9aa7aa907fe99032a58c6382c ]

The fr_hard_header function is used to prepend the header to skbs before
transmission. It is used in 3 situations:
1) When a control packet is generated internally in this driver;
2) When a user sends an skb on an Ethernet-emulating PVC device;
3) When a user sends an skb on a normal PVC device.

These 3 situations need to be handled differently by fr_hard_header.
Different headers should be prepended to the skb in different situations.

Currently fr_hard_header distinguishes these 3 situations using
skb->protocol. For situation 1 and 2, a special skb->protocol value
will be assigned before calling fr_hard_header, so that it can recognize
these 2 situations. All skb->protocol values other than these special ones
are treated by fr_hard_header as situation 3.

However, it is possible that in situation 3, the user sends an skb with
one of the special skb->protocol values. In this case, fr_hard_header
would incorrectly treat it as situation 1 or 2.

This patch tries to solve this issue by using skb->dev instead of
skb->protocol to distinguish between these 3 situations. For situation
1, skb->dev would be NULL; for situation 2, skb->dev->type would be
ARPHRD_ETHER; and for situation 3, skb->dev->type would be ARPHRD_DLCI.

This way fr_hard_header would be able to distinguish these 3 situations
correctly regardless what skb->protocol value the user tries to use in
situation 3.

Cc: Krzysztof Halasa 
Signed-off-by: Xie He 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin