linux-stable.git/drivers/net/vrf.c, branch v5.7

vrf: Fix IPv6 with qdisc and xfrm

2020-04-23T02:30:38+00:00

When a qdisc is attached to the VRF device, the packet goes down the ndo
xmit function which is setup to send the packet back to the VRF driver
which does a lookup to send the packet out. The lookup in the VRF driver
is not considering xfrm policies. Change it to use ip6_dst_lookup_flow
rather than ip6_route_output.

Fixes: 35402e313663 ("net: Add IPv6 support to VRF device")
Signed-off-by: David Ahern 
Signed-off-by: David S. Miller

vrf: Check skb for XFRM_TRANSFORMED flag

2020-04-22T19:32:11+00:00

To avoid a loop with qdiscs and xfrms, check if the skb has already gone
through the qdisc attached to the VRF device and then to the xfrm layer.
If so, no need for a second redirect.

Fixes: 193125dbd8eb ("net: Introduce VRF device driver")
Reported-by: Trev Larock 
Signed-off-by: David Ahern 
Signed-off-by: David S. Miller

Remove DST_HOST

2020-03-24T04:57:44+00:00

Previous changes to the IP routing code have removed all the
tests for the DS_HOST route flag.
Remove the flags and all the code that sets it.

Signed-off-by: David Laight 
Acked-by: David Ahern 
Signed-off-by: David S. Miller

net: core: add generic lockdep keys

2019-10-24T21:53:48+00:00

Some interface types could be nested.
(VLAN, BONDING, TEAM, MACSEC, MACVLAN, IPVLAN, VIRT_WIFI, VXLAN, etc..)
These interface types should set lockdep class because, without lockdep
class key, lockdep always warn about unexisting circular locking.

In the current code, these interfaces have their own lockdep class keys and
these manage itself. So that there are so many duplicate code around the
/driver/net and /net/.
This patch adds new generic lockdep keys and some helper functions for it.

This patch does below changes.
a) Add lockdep class keys in struct net_device
   - qdisc_running, xmit, addr_list, qdisc_busylock
   - these keys are used as dynamic lockdep key.
b) When net_device is being allocated, lockdep keys are registered.
   - alloc_netdev_mqs()
c) When net_device is being free'd llockdep keys are unregistered.
   - free_netdev()
d) Add generic lockdep key helper function
   - netdev_register_lockdep_key()
   - netdev_unregister_lockdep_key()
   - netdev_update_lockdep_key()
e) Remove unnecessary generic lockdep macro and functions
f) Remove unnecessary lockdep code of each interfaces.

After this patch, each interface modules don't need to maintain
their lockdep keys.

Signed-off-by: Taehee Yoo 
Signed-off-by: David S. Miller

netfilter: drop bridge nf reset from nf_reset

2019-10-01T16:42:15+00:00

commit 174e23810cd31
("sk_buff: drop all skb extensions on free and skb scrubbing") made napi
recycle always drop skb extensions.  The additional skb_ext_del() that is
performed via nf_reset on napi skb recycle is not needed anymore.

Most nf_reset() calls in the stack are there so queued skb won't block
'rmmod nf_conntrack' indefinitely.

This removes the skb_ext_del from nf_reset, and renames it to a more
fitting nf_reset_ct().

In a few selected places, add a call to skb_ext_reset to make sure that
no active extensions remain.

I am submitting this for "net", because we're still early in the release
cycle.  The patch applies to net-next too, but I think the rename causes
needless divergence between those trees.

Suggested-by: Eric Dumazet 
Signed-off-by: Florian Westphal 
Signed-off-by: Pablo Neira Ayuso

vrf: Do not attempt to create IPv6 mcast rule if IPv6 is disabled

2019-09-27T18:07:05+00:00

A user reported that vrf create fails when IPv6 is disabled at boot using
'ipv6.disable=1':
   https://bugzilla.kernel.org/show_bug.cgi?id=204903

The failure is adding fib rules at create time. Add RTNL_FAMILY_IP6MR to
the check in vrf_fib_rule if ipv6_mod_enabled is disabled.

Fixes: e4a38c0c4b27 ("ipv6: add vrf table handling code for ipv6 mcast")
Signed-off-by: David Ahern 
Cc: Patrick Ruddy 
Signed-off-by: David S. Miller

vrf: make sure skb->data contains ip header to make routing

2019-07-21T20:32:51+00:00

vrf_process_v4_outbound() and vrf_process_v6_outbound() do routing
using ip/ipv6 addresses, but don't make sure the header is available
in skb->data[] (skb_headlen() is less then header size).

Case:

1) igb driver from intel.
2) Packet size is greater then 255.
3) MPLS forwards to VRF device.

So, patch adds pskb_may_pull() calls in vrf_process_v4/v6_outbound()
functions.

Signed-off-by: Peter Kosyh 
Reviewed-by: David Ahern 
Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2019-06-28T04:06:39+00:00

The new route handling in ip_mc_finish_output() from 'net' overlapped
with the new support for returning congestion notifications from BPF
programs.

In order to handle this I had to take the dev_loopback_xmit() calls
out of the switch statement.

The aquantia driver conflicts were simple overlapping changes.

Signed-off-by: David S. Miller

ipv6: constify rt6_nexthop()

2019-06-26T20:26:08+00:00

There is no functional change in this patch, it only prepares the next one.

rt6_nexthop() will be used by ip6_dst_lookup_neigh(), which uses const
variables.

Signed-off-by: Nicolas Dichtel 
Reported-by: kbuild test robot 
Acked-by: Nick Desaulniers 
Signed-off-by: David S. Miller

ipv6: convert major tx path to use RT6_LOOKUP_F_DST_NOREF

2019-06-23T20:24:17+00:00

For tx path, in most cases, we still have to take refcnt on the dst
cause the caller is caching the dst somewhere. But it still is
beneficial to make use of RT6_LOOKUP_F_DST_NOREF flag while doing the
route lookup. It is cause this flag prevents manipulating refcnt on
net->ipv6.ip6_null_entry when doing fib6_rule_lookup() to traverse each
routing table. The null_entry is a shared object and constant updates on
it cause false sharing.

We converted the current major lookup function ip6_route_output_flags()
to make use of RT6_LOOKUP_F_DST_NOREF.

Together with the change in the rx path, we see noticable performance
boost:
I ran synflood tests between 2 hosts under the same switch. Both hosts
have 20G mlx NIC, and 8 tx/rx queues.
Sender sends pure SYN flood with random src IPs and ports using trafgen.
Receiver has a simple TCP listener on the target port.
Both hosts have multiple custom rules:
- For incoming packets, only local table is traversed.
- For outgoing packets, 3 tables are traversed to find the route.
The packet processing rate on the receiver is as follows:
- Before the fix: 3.78Mpps
- After the fix:  5.50Mpps

Signed-off-by: Wei Wang 
Signed-off-by: David S. Miller