Nik pointed that the VRF driver should be using skb_header_pointer
instead of accessing skb->data and bits beyond directly which can
be garbage.

Fixes: 35402e313663 ("net: Add IPv6 support to VRF device")
Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commands run in a vrf context are not failing as expected on a route lookup:
    root@kenny:~# ip ro ls table vrf-red
    unreachable default

    root@kenny:~# ping -I vrf-red -c1 -w1 10.100.1.254
    ping: Warning: source address might be selected on device other than vrf-red.
    PING 10.100.1.254 (10.100.1.254) from 0.0.0.0 vrf-red: 56(84) bytes of data.

    --- 10.100.1.254 ping statistics ---
    2 packets transmitted, 0 received, 100% packet loss, time 999ms

Since the vrf table does not have a route for 10.100.1.254 the ping
should have failed. The saddr lookup causes a full VRF table lookup.
Propogating a lookup failure to the user allows the command to fail as
expected:

    root@kenny:~# ping -I vrf-red -c1 -w1 10.100.1.254
    connect: No route to host

Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Conflicts:
	drivers/net/ethernet/renesas/ravb_main.c
	kernel/bpf/syscall.c
	net/ipv4/ipmr.c

All three conflicts were cases of overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>

Sometimes the drivers and other code would find it handy to know some
internal information about upper device being changed. So allow upper-code
to pass information down to notifier listeners during linking.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Eliminate netdev_master_upper_dev_link_private and pass priv directly as
a parameter of netdev_master_upper_dev_link.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The private slave queue and slave struct haven't been used for anything
and aren't needed, this allows to reduce memory usage and simplify
enslave/release. We can use netdev_for_each_lower_dev() to free the vrf
ports when deleting a vrf device. Also if in the future a private struct
is needed for each slave, it can be implemented via lower devices'
private member (similar to how bonding does it).

Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When vrf's ->newlink is called, if register_netdevice() fails then it
does free_netdev(), but that's also done by rtnl_newlink() so a second
free happens and memory gets corrupted, to reproduce execute the
following line a couple of times (1 - 5 usually is enough):
$ for i in `seq 1 5`; do ip link add vrf: type vrf table 1; done;
This works because we fail in register_netdevice() because of the wrong
name "vrf:".

And here's a trace of one crash:
[   28.792157] ------------[ cut here ]------------
[   28.792407] kernel BUG at fs/namei.c:246!
[   28.792608] invalid opcode: 0000 [#1] SMP
[   28.793240] Modules linked in: vrf nfsd auth_rpcgss oid_registry
nfs_acl nfs lockd grace sunrpc crct10dif_pclmul crc32_pclmul
crc32c_intel qxl drm_kms_helper ttm drm aesni_intel aes_x86_64 psmouse
glue_helper lrw evdev gf128mul i2c_piix4 ablk_helper cryptd ppdev
parport_pc parport serio_raw pcspkr virtio_balloon virtio_console
i2c_core acpi_cpufreq button 9pnet_virtio 9p 9pnet fscache ipv6 autofs4
ext4 crc16 mbcache jbd2 virtio_blk virtio_net sg sr_mod cdrom
ata_generic ehci_pci uhci_hcd ehci_hcd e1000 usbcore usb_common ata_piix
libata virtio_pci virtio_ring virtio scsi_mod floppy
[   28.796016] CPU: 0 PID: 1148 Comm: ld-linux-x86-64 Not tainted
4.4.0-rc1+ #24
[   28.796016] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS 1.8.1-20150318_183358- 04/01/2014
[   28.796016] task: ffff8800352561c0 ti: ffff88003592c000 task.ti:
ffff88003592c000
[   28.796016] RIP: 0010:[<ffffffff812187b3>]  [<ffffffff812187b3>]
putname+0x43/0x60
[   28.796016] RSP: 0018:ffff88003592fe88  EFLAGS: 00010246
[   28.796016] RAX: 0000000000000000 RBX: ffff8800352561c0 RCX:
0000000000000001
[   28.796016] RDX: 0000000000000000 RSI: 0000000000000000 RDI:
ffff88003784f000
[   28.796016] RBP: ffff88003592ff08 R08: 0000000000000001 R09:
0000000000000000
[   28.796016] R10: 0000000000000000 R11: 0000000000000001 R12:
0000000000000000
[   28.796016] R13: 000000000000047c R14: ffff88003784f000 R15:
ffff8800358c4a00
[   28.796016] FS:  0000000000000000(0000) GS:ffff88003fc00000(0000)
knlGS:0000000000000000
[   28.796016] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   28.796016] CR2: 00007ffd583bc2d9 CR3: 0000000035a99000 CR4:
00000000000406f0
[   28.796016] Stack:
[   28.796016]  ffffffff8121045d ffffffff812102d3 ffff8800352561c0
ffff880035a91660
[   28.796016]  ffff8800008a9880 0000000000000000 ffffffff81a49940
00ffffff81218684
[   28.796016]  ffff8800352561c0 000000000000047c 0000000000000000
ffff880035b36d80
[   28.796016] Call Trace:
[   28.796016]  [<ffffffff8121045d>] ?
do_execveat_common.isra.34+0x74d/0x930
[   28.796016]  [<ffffffff812102d3>] ?
do_execveat_common.isra.34+0x5c3/0x930
[   28.796016]  [<ffffffff8121066c>] do_execve+0x2c/0x30
[   28.796016]  [<ffffffff810939a0>]
call_usermodehelper_exec_async+0xf0/0x140
[   28.796016]  [<ffffffff810938b0>] ? umh_complete+0x40/0x40
[   28.796016]  [<ffffffff815cb1af>] ret_from_fork+0x3f/0x70
[   28.796016] Code: 48 8d 47 1c 48 89 e5 53 48 8b 37 48 89 fb 48 39 c6
74 1a 48 8b 3d 7e e9 8f 00 e8 49 fa fc ff 48 89 df e8 f1 01 fd ff 5b 5d
f3 c3 <0f> 0b 48 89 fe 48 8b 3d 61 e9 8f 00 e8 2c fa fc ff 5b 5d eb e9
[   28.796016] RIP  [<ffffffff812187b3>] putname+0x43/0x60
[   28.796016]  RSP <ffff88003592fe88>

Fixes: 193125dbd8eb ("net: Introduce VRF device driver")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for IPv6 to VRF device driver. Implemenation parallels what
has been done for IPv4.

Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The network namespace is already passed into dst_output pass it into
dst->output lwt->output and friends.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>