linux-stable.git/drivers/net/usb, branch v6.11 Linux kernel stable tree r8152: fix the firmware doesn't work 2024-09-04T23:34:06+00:00 Hayes Wang hayeswang@realtek.com 2024-09-03T06:33:33+00:00 8487b4af59d4d7feda4b119dc2d92c67ca25c27e generic_ocp_write() asks the parameter "size" must be 4 bytes align. Therefore, write the bp would fail, if the mac->bp_num is odd. Align the size to 4 for fixing it. The way may write an extra bp, but the rtl8152_is_fw_mac_ok() makes sure the value must be 0 for the bp whose index is more than mac->bp_num. That is, there is no influence for the firmware. Besides, I check the return value of generic_ocp_write() to make sure everything is correct. Fixes: e5c266a61186 ("r8152: set bp in bulk") Signed-off-by: Hayes Wang <hayeswang@realtek.com> Link: https://patch.msgid.link/20240903063333.4502-1-hayeswang@realtek.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
generic_ocp_write() asks the parameter "size" must be 4 bytes align.
Therefore, write the bp would fail, if the mac->bp_num is odd. Align the
size to 4 for fixing it. The way may write an extra bp, but the
rtl8152_is_fw_mac_ok() makes sure the value must be 0 for the bp whose
index is more than mac->bp_num. That is, there is no influence for the
firmware.

Besides, I check the return value of generic_ocp_write() to make sure
everything is correct.

Fixes: e5c266a61186 ("r8152: set bp in bulk")
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Link: https://patch.msgid.link/20240903063333.4502-1-hayeswang@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
usbnet: modern method to get random MAC 2024-09-03T18:36:51+00:00 Oliver Neukum oneukum@suse.com 2024-08-29T17:50:55+00:00 bab8eb0dd4cb995caa4a0529d5655531c2ec5e8e The driver generates a random MAC once on load and uses it over and over, including on two devices needing a random MAC at the same time. Jakub suggested revamping the driver to the modern API for setting a random MAC rather than fixing the old stuff. The bug is as old as the driver. Signed-off-by: Oliver Neukum <oneukum@suse.com> Reviewed-by: Simon Horman <horms@kernel.org> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Link: https://patch.msgid.link/20240829175201.670718-1-oneukum@suse.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
The driver generates a random MAC once on load
and uses it over and over, including on two devices
needing a random MAC at the same time.

Jakub suggested revamping the driver to the modern
API for setting a random MAC rather than fixing
the old stuff.

The bug is as old as the driver.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Link: https://patch.msgid.link/20240829175201.670718-1-oneukum@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
usbnet: ipheth: fix carrier detection in modes 1 and 4 2024-08-09T12:54:21+00:00 Foster Snowhill forst@pen.gy 2024-08-06T17:28:09+00:00 67927a1b255d883881be9467508e0af9a5e0be9d Apart from the standard "configurations", "interfaces" and "alternate interface settings" in USB, iOS devices also have a notion of "modes". In different modes, the device exposes a different set of available configurations. Depending on the iOS version, and depending on the current mode, the length and contents of the carrier state control message differs: * 1 byte (seen on iOS 4.2.1, 8.4): * 03: carrier off (mode 0) * 04: carrier on (mode 0) * 3 bytes (seen on iOS 10.3.4, 15.7.6): * 03 03 03: carrier off (mode 0) * 04 04 03: carrier on (mode 0) * 4 bytes (seen on iOS 16.5, 17.6): * 03 03 03 00: carrier off (mode 0) * 04 03 03 00: carrier off (mode 1) * 06 03 03 00: carrier off (mode 4) * 04 04 03 04: carrier on (mode 0 and 1) * 06 04 03 04: carrier on (mode 4) Before this change, the driver always used the first byte of the response to determine carrier state. From this larger sample, the first byte seems to indicate the number of available USB configurations in the current mode (with the exception of the default mode 0), and in some cases (namely mode 1 and 4) does not correlate with the carrier state. Previous logic erroneously counted `04 03 03 00` as "carrier on" and `06 04 03 04` as "carrier off" on iOS versions that support mode 1 and mode 4 respectively. Only modes 0, 1 and 4 expose the USB Ethernet interfaces necessary for the ipheth driver. Check the second byte of the control message where possible, and fall back to checking the first byte on older iOS versions. Signed-off-by: Foster Snowhill <forst@pen.gy> Tested-by: Georgi Valkov <gvalkov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Apart from the standard "configurations", "interfaces" and "alternate
interface settings" in USB, iOS devices also have a notion of
"modes". In different modes, the device exposes a different set of
available configurations.

Depending on the iOS version, and depending on the current mode, the
length and contents of the carrier state control message differs:

* 1 byte (seen on iOS 4.2.1, 8.4):
    * 03: carrier off (mode 0)
    * 04: carrier on (mode 0)
* 3 bytes (seen on iOS 10.3.4, 15.7.6):
    * 03 03 03: carrier off (mode 0)
    * 04 04 03: carrier on (mode 0)
* 4 bytes (seen on iOS 16.5, 17.6):
    * 03 03 03 00: carrier off (mode 0)
    * 04 03 03 00: carrier off (mode 1)
    * 06 03 03 00: carrier off (mode 4)
    * 04 04 03 04: carrier on (mode 0 and 1)
    * 06 04 03 04: carrier on (mode 4)

Before this change, the driver always used the first byte of the
response to determine carrier state.

From this larger sample, the first byte seems to indicate the number of
available USB configurations in the current mode (with the exception of
the default mode 0), and in some cases (namely mode 1 and 4) does not
correlate with the carrier state.

Previous logic erroneously counted `04 03 03 00` as "carrier on" and
`06 04 03 04` as "carrier off" on iOS versions that support mode 1 and
mode 4 respectively.

Only modes 0, 1 and 4 expose the USB Ethernet interfaces necessary for
the ipheth driver.

Check the second byte of the control message where possible, and fall
back to checking the first byte on older iOS versions.

Signed-off-by: Foster Snowhill <forst@pen.gy>
Tested-by: Georgi Valkov <gvalkov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
usbnet: ipheth: do not stop RX on failing RX callback 2024-08-09T12:54:21+00:00 Foster Snowhill forst@pen.gy 2024-08-06T17:28:08+00:00 74efed51e0a4d62f998f806c307778b47fc73395 RX callbacks can fail for multiple reasons: * Payload too short * Payload formatted incorrecly (e.g. bad NCM framing) * Lack of memory None of these should cause the driver to seize up. Make such failures non-critical and continue processing further incoming URBs. Signed-off-by: Foster Snowhill <forst@pen.gy> Signed-off-by: David S. Miller <davem@davemloft.net> 
RX callbacks can fail for multiple reasons:

* Payload too short
* Payload formatted incorrecly (e.g. bad NCM framing)
* Lack of memory

None of these should cause the driver to seize up.

Make such failures non-critical and continue processing further
incoming URBs.

Signed-off-by: Foster Snowhill <forst@pen.gy>
Signed-off-by: David S. Miller <davem@davemloft.net>
usbnet: ipheth: drop RX URBs with no payload 2024-08-09T12:54:20+00:00 Foster Snowhill forst@pen.gy 2024-08-06T17:28:07+00:00 94d7eeb6c0ef0310992944f0d0296929816a2cb0 On iPhone 15 Pro Max one can observe periodic URBs with no payload on the "bulk in" (RX) endpoint. These don't seem to do anything meaningful. Reproduced on iOS 17.5.1 and 17.6. This behaviour isn't observed on iPhone 11 on the same iOS version. The nature of these zero-length URBs is so far unknown. Drop RX URBs with no payload. Signed-off-by: Foster Snowhill <forst@pen.gy> Signed-off-by: David S. Miller <davem@davemloft.net> 
On iPhone 15 Pro Max one can observe periodic URBs with no payload
on the "bulk in" (RX) endpoint. These don't seem to do anything
meaningful. Reproduced on iOS 17.5.1 and 17.6.

This behaviour isn't observed on iPhone 11 on the same iOS version. The
nature of these zero-length URBs is so far unknown.

Drop RX URBs with no payload.

Signed-off-by: Foster Snowhill <forst@pen.gy>
Signed-off-by: David S. Miller <davem@davemloft.net>
usbnet: ipheth: remove extraneous rx URB length check 2024-08-09T12:54:20+00:00 Foster Snowhill forst@pen.gy 2024-08-06T17:28:06+00:00 655b46d7a39ac6f049698b27c1568c0f7ff85d1e Rx URB length was already checked in ipheth_rcvbulk_callback_legacy() and ipheth_rcvbulk_callback_ncm(), depending on the current mode. The check in ipheth_rcvbulk_callback() was thus mostly a duplicate. The only place in ipheth_rcvbulk_callback() where we care about the URB length is for the initial control frame. These frames are always 4 bytes long. This has been checked as far back as iOS 4.2.1 on iPhone 3G. Remove the extraneous URB length check. For control frames, check for the specific 4-byte length instead. Signed-off-by: Foster Snowhill <forst@pen.gy> Tested-by: Georgi Valkov <gvalkov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Rx URB length was already checked in ipheth_rcvbulk_callback_legacy()
and ipheth_rcvbulk_callback_ncm(), depending on the current mode.
The check in ipheth_rcvbulk_callback() was thus mostly a duplicate.

The only place in ipheth_rcvbulk_callback() where we care about the URB
length is for the initial control frame. These frames are always 4 bytes
long. This has been checked as far back as iOS 4.2.1 on iPhone 3G.

Remove the extraneous URB length check. For control frames, check for
the specific 4-byte length instead.

Signed-off-by: Foster Snowhill <forst@pen.gy>
Tested-by: Georgi Valkov <gvalkov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
usbnet: ipheth: race between ipheth_close and error handling 2024-08-09T12:54:20+00:00 Oliver Neukum oneukum@suse.com 2024-08-06T17:28:05+00:00 e5876b088ba03a62124266fa20d00e65533c7269 ipheth_sndbulk_callback() can submit carrier_work as a part of its error handling. That means that the driver must make sure that the work is cancelled after it has made sure that no more URB can terminate with an error condition. Hence the order of actions in ipheth_close() needs to be inverted. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Foster Snowhill <forst@pen.gy> Tested-by: Georgi Valkov <gvalkov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
ipheth_sndbulk_callback() can submit carrier_work
as a part of its error handling. That means that
the driver must make sure that the work is cancelled
after it has made sure that no more URB can terminate
with an error condition.

Hence the order of actions in ipheth_close() needs
to be inverted.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Foster Snowhill <forst@pen.gy>
Tested-by: Georgi Valkov <gvalkov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: usb: qmi_wwan: add MeiG Smart SRM825L 2024-08-07T02:35:08+00:00 ZHANG Yuntian yt@radxa.com 2024-08-03T07:46:51+00:00 1ca645a2f74a4290527ae27130c8611391b07dbf Add support for MeiG Smart SRM825L which is based on Qualcomm 315 chip. T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=2dee ProdID=4d22 Rev= 4.14 S: Manufacturer=MEIG S: Product=LTE-A Module S: SerialNumber=6f345e48 C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=896mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=88(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms Signed-off-by: ZHANG Yuntian <yt@radxa.com> Link: https://patch.msgid.link/D1EB81385E405DFE+20240803074656.567061-1-yt@radxa.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
Add support for MeiG Smart SRM825L which is based on Qualcomm 315 chip.

T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=5000 MxCh= 0
D:  Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs=  1
P:  Vendor=2dee ProdID=4d22 Rev= 4.14
S:  Manufacturer=MEIG
S:  Product=LTE-A Module
S:  SerialNumber=6f345e48
C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=896mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E:  Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=88(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E:  Ad=89(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
E:  Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms

Signed-off-by: ZHANG Yuntian <yt@radxa.com>
Link: https://patch.msgid.link/D1EB81385E405DFE+20240803074656.567061-1-yt@radxa.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: usb: qmi_wwan: fix memory leak for not ip packets 2024-08-05T10:11:31+00:00 Daniele Palmas dnlplm@gmail.com 2024-08-01T13:55:12+00:00 7ab107544b777c3bd7feb9fe447367d8edd5b202 Free the unused skb when not ip packets arrive. Fixes: c6adf77953bc ("net: usb: qmi_wwan: add qmap mux protocol support") Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> 
Free the unused skb when not ip packets arrive.

Fixes: c6adf77953bc ("net: usb: qmi_wwan: add qmap mux protocol support")
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: usb: sr9700: fix uninitialized variable use in sr_mdio_read 2024-07-26T10:14:41+00:00 Ma Ke make24@iscas.ac.cn 2024-07-25T02:29:42+00:00 08f3a5c38087d1569e982a121aad1e6acbf145ce It could lead to error happen because the variable res is not updated if the call to sr_share_read_word returns an error. In this particular case error code was returned and res stayed uninitialized. Same issue also applies to sr_read_reg. This can be avoided by checking the return value of sr_share_read_word and sr_read_reg, and propagating the error if the read operation failed. Found by code review. Cc: stable@vger.kernel.org Fixes: c9b37458e956 ("USB2NET : SR9700 : One chip USB 1.1 USB2NET SR9700Device Driver Support") Signed-off-by: Ma Ke <make24@iscas.ac.cn> Reviewed-by: Shigeru Yoshida <syoshida@redhat.com> Reviewed-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
It could lead to error happen because the variable res is not updated if
the call to sr_share_read_word returns an error. In this particular case
error code was returned and res stayed uninitialized. Same issue also
applies to sr_read_reg.

This can be avoided by checking the return value of sr_share_read_word
and sr_read_reg, and propagating the error if the read operation failed.

Found by code review.

Cc: stable@vger.kernel.org
Fixes: c9b37458e956 ("USB2NET : SR9700 : One chip USB 1.1 USB2NET SR9700Device Driver Support")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Reviewed-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>