linux-stable.git/drivers/net/usb, branch v5.4.182

USB: zaurus: support another broken Zaurus

2022-03-02T10:41:02+00:00

commit 6605cc67ca18b9d583eb96e18a20f5f4e726103c upstream.

This SL-6000 says Direct Line, not Ethernet

v2: added Reporter and Link

Signed-off-by: Oliver Neukum 
Reported-by: Ross Maynard 
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215361
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

sr9700: sanity check for packet length

2022-03-02T10:41:02+00:00

commit e9da0b56fe27206b49f39805f7dcda8a89379062 upstream.

A malicious device can leak heap data to user space
providing bogus frame lengths. Introduce a sanity check.

Signed-off-by: Oliver Neukum 
Reviewed-by: Grant Grundler 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: usb: qmi_wwan: Add support for Dell DW5829e

2022-02-23T11:00:01+00:00

[ Upstream commit 8ecbb179286cbc91810c16caeb3396e06305cd0c ]

Dell DW5829e same as DW5821e except the CAT level.
DW5821e supports CAT16 but DW5829e supports CAT9.
Also, DW5829e includes normal and eSIM type.
Please see below test evidence:

T:  Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  5 Spd=5000 MxCh= 0
D:  Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs=  1
P:  Vendor=413c ProdID=81e6 Rev=03.18
S:  Manufacturer=Dell Inc.
S:  Product=DW5829e Snapdragon X20 LTE
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA
I:  If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I:  If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=usbhid
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option

T:  Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  7 Spd=5000 MxCh= 0
D:  Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs=  1
P:  Vendor=413c ProdID=81e4 Rev=03.18
S:  Manufacturer=Dell Inc.
S:  Product=DW5829e-eSIM Snapdragon X20 LTE
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA
I:  If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I:  If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=usbhid
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option

Signed-off-by: Slark Xiao 
Acked-by: Bjørn Mork 
Link: https://lore.kernel.org/r/20220209024717.8564-1-slark_xiao@163.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

net: usb: ax88179_178a: Fix out-of-bounds accesses in RX fixup

2022-02-16T11:52:52+00:00

commit 57bc3d3ae8c14df3ceb4e17d26ddf9eeab304581 upstream.

ax88179_rx_fixup() contains several out-of-bounds accesses that can be
triggered by a malicious (or defective) USB device, in particular:

 - The metadata array (hdr_off..hdr_off+2*pkt_cnt) can be out of bounds,
   causing OOB reads and (on big-endian systems) OOB endianness flips.
 - A packet can overlap the metadata array, causing a later OOB
   endianness flip to corrupt data used by a cloned SKB that has already
   been handed off into the network stack.
 - A packet SKB can be constructed whose tail is far beyond its end,
   causing out-of-bounds heap data to be considered part of the SKB's
   data.

I have tested that this can be used by a malicious USB device to send a
bogus ICMPv6 Echo Request and receive an ICMPv6 Echo Reply in response
that contains random kernel heap data.
It's probably also possible to get OOB writes from this on a
little-endian system somehow - maybe by triggering skb_cow() via IP
options processing -, but I haven't tested that.

Fixes: e2ca90c276e1 ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver")
Cc: stable@kernel.org
Signed-off-by: Jann Horn 
Signed-off-by: Greg Kroah-Hartman

ipheth: fix EOVERFLOW in ipheth_rcvbulk_callback

2022-02-05T11:35:36+00:00

commit 63e4b45c82ed1bde979da7052229a4229ce9cabf upstream.

When rx_buf is allocated we need to account for IPHETH_IP_ALIGN,
which reduces the usable size by 2 bytes. Otherwise we have 1512
bytes usable instead of 1514, and if we receive more than 1512
bytes, ipheth_rcvbulk_callback is called with status -EOVERFLOW,
after which the driver malfunctiones and all communication stops.

Resolves ipheth 2-1:4.2: ipheth_rcvbulk_callback: urb status: -75

Fixes: f33d9e2b48a3 ("usbnet: ipheth: fix connectivity with iOS 14")
Signed-off-by: Georgi Valkov 
Tested-by: Jan Kiszka 
Link: https://lore.kernel.org/all/B60B8A4B-92A0-49B3-805D-809A2433B46C@abv.bg/
Link: https://lore.kernel.org/all/24851bd2769434a5fc24730dce8e8a984c5a4505.1643699778.git.jan.kiszka@siemens.com/
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

net: mcs7830: handle usb read errors properly

2022-01-27T08:19:37+00:00

[ Upstream commit d668769eb9c52b150753f1653f7f5a0aeb8239d2 ]

Syzbot reported uninit value in mcs7830_bind(). The problem was in
missing validation check for bytes read via usbnet_read_cmd().

usbnet_read_cmd() internally calls usb_control_msg(), that returns
number of bytes read. Code should validate that requested number of bytes
was actually read.

So, this patch adds missing size validation check inside
mcs7830_get_reg() to prevent uninit value bugs

Reported-and-tested-by: syzbot+003c0a286b9af5412510@syzkaller.appspotmail.com
Fixes: 2a36d7083438 ("USB: driver for mcs7830 (aka DeLOCK) USB ethernet adapter")
Signed-off-by: Pavel Skripkin 
Reviewed-by: Arnd Bergmann 
Link: https://lore.kernel.org/r/20220106225716.7425-1-paskripkin@gmail.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

rndis_host: support Hytera digital radios

2022-01-11T14:23:33+00:00

commit 29262e1f773b4b6a43711120be564c57fca07cfb upstream.

Hytera makes a range of digital (DMR) radios. These radios can be
programmed to a allow a computer to control them over Ethernet over USB,
either using NCM or RNDIS.

This commit adds support for RNDIS for Hytera radios. I tested with a
Hytera PD785 and a Hytera MD785G. When these radios are programmed to
set up a Radio to PC Network using RNDIS, an USB interface will be added
with class 2 (Communications), subclass 2 (Abstract Modem Control) and
an interface protocol of 255 ("vendor specific" - lsusb even hints "MSFT
RNDIS?").

This patch is similar to the solution of this StackOverflow user, but
that only works for the Hytera MD785:
https://stackoverflow.com/a/53550858

To use the "Radio to PC Network" functionality of Hytera DMR radios, the
radios need to be programmed correctly in CPS (Hytera's Customer
Programming Software). "Forward to PC" should be checked in "Network"
(under "General Setting" in "Conventional") and the "USB Network
Communication Protocol" should be set to RNDIS.

Signed-off-by: Thomas Toye 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: usb: pegasus: Do not drop long Ethernet frames

2022-01-05T11:37:44+00:00

[ Upstream commit ca506fca461b260ab32952b610c3d4aadc6c11fd ]

The D-Link DSB-650TX (2001:4002) is unable to receive Ethernet frames
that are longer than 1518 octets, for example, Ethernet frames that
contain 802.1Q VLAN tags.

The frames are sent to the pegasus driver via USB but the driver
discards them because they have the Long_pkt field set to 1 in the
received status report. The function read_bulk_callback of the pegasus
driver treats such received "packets" (in the terminology of the
hardware) as errors but the field simply does just indicate that the
Ethernet frame (MAC destination to FCS) is longer than 1518 octets.

It seems that in the 1990s there was a distinction between
"giant" (> 1518) and "runt" (< 64) frames and the hardware includes
flags to indicate this distinction. It seems that the purpose of the
distinction "giant" frames was to not allow infinitely long frames due
to transmission errors and to allow hardware to have an upper limit of
the frame size. However, the hardware already has such limit with its
2048 octet receive buffer and, therefore, Long_pkt is merely a
convention and should not be treated as a receive error.

Actually, the hardware is even able to receive Ethernet frames with 2048
octets which exceeds the claimed limit frame size limit of the driver of
1536 octets (PEGASUS_MTU).

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Matthias-Christian Ott 
Reviewed-by: Andrew Lunn 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

net: usb: lan78xx: add Allied Telesis AT29M2-AF

2021-12-29T11:23:33+00:00

commit ef8a0f6eab1ca5d1a75c242c5c7b9d386735fa0a upstream.

This adds the vendor and product IDs for the AT29M2-AF which is a
lan7801-based device.

Signed-off-by: Greg Jesionowski 
Link: https://lore.kernel.org/r/20211214221027.305784-1-jesionowskigreg@gmail.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

net: cdc_ncm: Allow for dwNtbOutMaxSize to be unset or zero

2021-12-14T13:49:03+00:00

commit 2be6d4d16a0849455a5c22490e3c5983495fed00 upstream.

Currently, due to the sequential use of min_t() and clamp_t() macros,
in cdc_ncm_check_tx_max(), if dwNtbOutMaxSize is not set, the logic
sets tx_max to 0.  This is then used to allocate the data area of the
SKB requested later in cdc_ncm_fill_tx_frame().

This does not cause an issue presently because when memory is
allocated during initialisation phase of SKB creation, more memory
(512b) is allocated than is required for the SKB headers alone (320b),
leaving some space (512b - 320b = 192b) for CDC data (172b).

However, if more elements (for example 3 x u64 = [24b]) were added to
one of the SKB header structs, say 'struct skb_shared_info',
increasing its original size (320b [320b aligned]) to something larger
(344b [384b aligned]), then suddenly the CDC data (172b) no longer
fits in the spare SKB data area (512b - 384b = 128b).

Consequently the SKB bounds checking semantics fails and panics:

  skbuff: skb_over_panic: text:ffffffff830a5b5f len:184 put:172   \
     head:ffff888119227c00 data:ffff888119227c00 tail:0xb8 end:0x80 dev:

  ------------[ cut here ]------------
  kernel BUG at net/core/skbuff.c:110!
  RIP: 0010:skb_panic+0x14f/0x160 net/core/skbuff.c:106
  
  Call Trace:
   
   skb_over_panic+0x2c/0x30 net/core/skbuff.c:115
   skb_put+0x205/0x210 net/core/skbuff.c:1877
   skb_put_zero include/linux/skbuff.h:2270 [inline]
   cdc_ncm_ndp16 drivers/net/usb/cdc_ncm.c:1116 [inline]
   cdc_ncm_fill_tx_frame+0x127f/0x3d50 drivers/net/usb/cdc_ncm.c:1293
   cdc_ncm_tx_fixup+0x98/0xf0 drivers/net/usb/cdc_ncm.c:1514

By overriding the max value with the default CDC_NCM_NTB_MAX_SIZE_TX
when not offered through the system provided params, we ensure enough
data space is allocated to handle the CDC data, meaning no crash will
occur.

Cc: Oliver Neukum 
Fixes: 289507d3364f9 ("net: cdc_ncm: use sysfs for rx/tx aggregation tuning")
Signed-off-by: Lee Jones 
Reviewed-by: Bjørn Mork 
Link: https://lore.kernel.org/r/20211202143437.1411410-1-lee.jones@linaro.org
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman