linux-stable.git/drivers/net/usb, branch v4.4.103

net: qmi_wwan: fix divide by 0 on bad descriptors

2017-11-21T08:21:18+00:00

commit 7fd078337201cf7468f53c3d9ef81ff78cb6df3b upstream.

A CDC Ethernet functional descriptor with wMaxSegmentSize = 0 will
cause a divide error in usbnet_probe:

divide error: 0000 [#1] PREEMPT SMP KASAN
Modules linked in:
CPU: 0 PID: 24 Comm: kworker/0:1 Not tainted 4.14.0-rc8-44453-g1fdc1a82c34f #56
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Workqueue: usb_hub_wq hub_event
task: ffff88006bef5c00 task.stack: ffff88006bf60000
RIP: 0010:usbnet_update_max_qlen+0x24d/0x390 drivers/net/usb/usbnet.c:355
RSP: 0018:ffff88006bf67508 EFLAGS: 00010246
RAX: 00000000000163c8 RBX: ffff8800621fce40 RCX: ffff8800621fcf34
RDX: 0000000000000000 RSI: ffffffff837ecb7a RDI: ffff8800621fcf34
RBP: ffff88006bf67520 R08: ffff88006bef5c00 R09: ffffed000c43f881
R10: ffffed000c43f880 R11: ffff8800621fc406 R12: 0000000000000003
R13: ffffffff85c71de0 R14: 0000000000000000 R15: 0000000000000000
FS:  0000000000000000(0000) GS:ffff88006ca00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffe9c0d6dac CR3: 00000000614f4000 CR4: 00000000000006f0
Call Trace:
 usbnet_probe+0x18b5/0x2790 drivers/net/usb/usbnet.c:1783
 qmi_wwan_probe+0x133/0x220 drivers/net/usb/qmi_wwan.c:1338
 usb_probe_interface+0x324/0x940 drivers/usb/core/driver.c:361
 really_probe drivers/base/dd.c:413
 driver_probe_device+0x522/0x740 drivers/base/dd.c:557

Fix by simply ignoring the bogus descriptor, as it is optional
for QMI devices anyway.

Fixes: 423ce8caab7e ("net: usb: qmi_wwan: New driver for Huawei QMI based WWAN devices")
Reported-by: Andrey Konovalov 
Signed-off-by: Bjørn Mork 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings 
Signed-off-by: Greg Kroah-Hartman

net: cdc_ether: fix divide by 0 on bad descriptors

2017-11-21T08:21:18+00:00

commit 2cb80187ba065d7decad7c6614e35e07aec8a974 upstream.

Setting dev->hard_mtu to 0 will cause a divide error in
usbnet_probe. Protect against devices with bogus CDC Ethernet
functional descriptors by ignoring a zero wMaxSegmentSize.

Signed-off-by: Bjørn Mork 
Acked-by: Oliver Neukum 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings 
Signed-off-by: Greg Kroah-Hartman

cdc_ncm: Set NTB format again after altsetting switch for Huawei devices

2017-11-15T16:13:11+00:00

commit 2b02c20ce0c28974b44e69a2e2f5ddc6a470ad6f upstream.

Some firmwares in Huawei E3372H devices have been observed to switch back
to NTB 32-bit format after altsetting switch.
This patch implements a driver flag to check for the device settings and
set NTB format to 16-bit again if needed.
The flag has been activated for devices controlled by the huawei_cdc_ncm.c
driver.

V1->V2:
- fixed broken error checks
- some corrections to the commit message
V2->V3:
- variable name changes, to clarify what's happening
- check (and possibly set) the NTB format later in the common bind code path

Signed-off-by: Enrico Mioso 
Reported-and-tested-by: Christian Panton 
Reviewed-by: Bjørn Mork 
CC: Bjørn Mork 
CC: Christian Panton 
CC: linux-usb@vger.kernel.org
CC: netdev@vger.kernel.org
CC: Oliver Neukum 
Signed-off-by: David S. Miller 
Cc: Porto Rio 
Signed-off-by: Greg Kroah-Hartman

USB: core: harden cdc_parse_cdc_header

2017-10-12T09:27:33+00:00

commit 2e1c42391ff2556387b3cb6308b24f6f65619feb upstream.

Andrey Konovalov reported a possible out-of-bounds problem for the
cdc_parse_cdc_header function.  He writes:
	It looks like cdc_parse_cdc_header() doesn't validate buflen
	before accessing buffer[1], buffer[2] and so on. The only check
	present is while (buflen > 0).

So fix this issue up by properly validating the buffer length matches
what the descriptor says it is.

Reported-by: Andrey Konovalov 
Tested-by: Andrey Konovalov 
Signed-off-by: Greg Kroah-Hartman

usb: plusb: Add support for PL-27A1

2017-10-08T08:14:19+00:00

[ Upstream commit 6f2aee0c0de65013333bbc26fe50c9c7b09a37f7 ]

This patch adds support for the PL-27A1 by adding the appropriate
USB ID's. This chip is used in the goobay Active USB 3.0 Data Link
and Unitek Y-3501 cables.

Signed-off-by: Roman Spychała 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

usb: qmi_wwan: add D-Link DWM-222 device ID

2017-08-25T00:02:36+00:00

commit bed9ff165960921303a100228585f2d1691b42eb upstream.

Signed-off-by: Hector Martin 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

kaweth: fix oops upon failed memory allocation

2017-08-07T02:19:42+00:00

commit 575ced7f8090c1a4e91e2daf8da9352a6a1fc7a7 upstream.

Just return an error upon failure.

Signed-off-by: Oliver Neukum 
Signed-off-by: David S. Miller 
Signed-off-by: Amit Pundir 
Signed-off-by: Greg Kroah-Hartman

kaweth: fix firmware download

2017-08-07T02:19:41+00:00

commit 60bcabd080f53561efa9288be45c128feda1a8bb upstream.

This fixes the oops discovered by the Umap2 project and Alan Stern.
The intf member needs to be set before the firmware is downloaded.

Signed-off-by: Oliver Neukum 
Signed-off-by: David S. Miller 
Signed-off-by: Amit Pundir 
Signed-off-by: Greg Kroah-Hartman

r8152: avoid start_xmit to schedule napi when napi is disabled

2017-06-17T04:39:38+00:00

[ Upstream commit de9bf29dd6e4a8a874cb92f8901aed50a9d0b1d3 ]

Stop the tx when the napi is disabled to prevent napi_schedule() is
called.

Signed-off-by: Hayes Wang 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

r8152: fix rtl8152_post_reset function

2017-06-17T04:39:38+00:00

[ Upstream commit 2c561b2b728ca4013e76d6439bde2c137503745e ]

The rtl8152_post_reset() should sumbit rx urb and interrupt transfer,
otherwise the rx wouldn't work and the linking change couldn't be
detected.

Signed-off-by: Hayes Wang 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman