linux-stable.git/drivers/net/usb, branch v4.1.38

cdc_ncm: workaround for EM7455 "silent" data interface

2016-08-20T03:08:38+00:00

[ Upstream commit c086e7096170390594c425114d98172bc9aceb8a ]

Several Lenovo users have reported problems with their Sierra
Wireless EM7455 modem. The driver has loaded successfully and
the MBIM management channel has appeared to work, including
establishing a connection to the mobile network. But no frames
have been received over the data interface.

The problem affects all EM7455 and MC7455, and is assumed to
affect other modems based on the same Qualcomm chipset and
baseband firmware.

Testing narrowed the problem down to what seems to be a
firmware timing bug during initialization. Adding a short sleep
while probing is sufficient to make the problem disappear.
Experiments have shown that 1-2 ms is too little to have any
effect, while 10-20 ms is enough to reliably succeed.

Reported-by: Stefan Armbruster 
Reported-by: Ralph Plawetzki 
Reported-by: Andreas Fett 
Reported-by: Rasmus Lerdorf 
Reported-by: Samo Ratnik 
Reported-and-tested-by: Aleksander Morgado 
Signed-off-by: Bjørn Mork 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

qmi_wwan: add "D-Link DWM-221 B1" device id

2016-07-11T03:07:06+00:00

[ Upstream commit e84810c7b85a2d7897797b3ad3e879168a8e032a ]

Thomas reports:
"Windows:

00 diagnostics
01 modem
02 at-port
03 nmea
04 nic

Linux:

T:  Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#=  4 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=2001 ProdID=7e19 Rev=02.32
S:  Manufacturer=Mobile Connect
S:  Product=Mobile Connect
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I:  If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage"

Reported-by: Thomas Schäfer 
Signed-off-by: Bjørn Mork 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

usbnet: cleanup after bind() in probe()

2016-07-11T03:07:00+00:00

[ Upstream commit 1666984c8625b3db19a9abc298931d35ab7bc64b ]

In case bind() works, but a later error forces bailing
in probe() in error cases work and a timer may be scheduled.
They must be killed. This fixes an error case related to
the double free reported in
http://www.spinics.net/lists/netdev/msg367669.html
and needs to go on top of Linus' fix to cdc-ncm.

Signed-off-by: Oliver Neukum 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

cdc_ncm: toggle altsetting to force reset before setup

2016-07-11T03:07:00+00:00

[ Upstream commit 48906f62c96cc2cd35753e59310cb70eb08cc6a5 ]

Some devices will silently fail setup unless they are reset first.
This is necessary even if the data interface is already in
altsetting 0, which it will be when the device is probed for the
first time.  Briefly toggling the altsetting forces a function
reset regardless of the initial state.

This fixes a setup problem observed on a number of Huawei devices,
appearing to operate in NTB-32 mode even if we explicitly set them
to NTB-16 mode.

Signed-off-by: Bjørn Mork 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

qmi_wwan: add Sierra Wireless EM74xx device ID

2016-07-11T03:07:00+00:00

[ Upstream commit bf13c94ccb33c3182efc92ce4989506a0f541243 ]

The MC74xx and EM74xx modules use different IDs by default, according
to the Lenovo EM7455 driver for Windows.

Signed-off-by: Bjørn Mork 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

qmi_wwan: add "4G LTE usb-modem U901"

2016-03-04T15:25:50+00:00

[ Upstream commit aac8d3c282e024c344c5b86dc1eab7af88bb9716 ]

Thomas reports:

T:  Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#=  4 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=05c6 ProdID=6001 Rev=00.00
S:  Manufacturer=USB Modem
S:  Product=USB Modem
S:  SerialNumber=1234567890ABCDEF
C:  #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I:  If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage

Reported-by: Thomas Schäfer 
Signed-off-by: Bjørn Mork 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

net: cdc_ncm: avoid changing RX/TX buffers on MTU changes

2016-01-31T19:23:35+00:00

[ Upstream commit 1dfddff5fcd869fcab0c52fafae099dfa435a935 ]

NCM buffer sizes are negotiated with the device independently of
the network device MTU.  The RX buffers are allocated by the
usbnet framework based on the rx_urb_size value set by cdc_ncm. A
single RX buffer can hold a number of MTU sized packets.

The default usbnet change_mtu ndo only modifies rx_urb_size if it
is equal to hard_mtu.  And the cdc_ncm driver will set rx_urb_size
and hard_mtu independently of each other, based on dwNtbInMaxSize
and dwNtbOutMaxSize respectively. It was therefore assumed that
usbnet_change_mtu() would never touch rx_urb_size.  This failed to
consider the case where dwNtbInMaxSize and dwNtbOutMaxSize happens
to be equal.

Fix by implementing an NCM specific change_mtu ndo, modifying the
netdev MTU without touching the buffer size settings.

Signed-off-by: Bjørn Mork 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

r8152: fix lockup when runtime PM is enabled

2016-01-23T04:54:13+00:00

[ Upstream commit 90186af404ada5a47b875bf3c16d0b02bb023ea0 ]

When an interface is brought up which was previously suspended (via
runtime PM), it would hang. This happens because napi_disable is called
before napi_enable.

Solve this by avoiding napi_enable in the resume during open function
(netif_running is true when open is called, IFF_UP is set after a
successful open; netif_running is false when close is called, but IFF_UP
is then still set).

While at it, remove WORK_ENABLE check from rtl8152_open (introduced with
the original change) because it cannot happen:

 - After this patch, runtime resume will not set it during rtl8152_open.
 - When link is up, rtl8152_open is not called.
 - When link is down during system/auto suspend/resume, it is not set.

Fixes: 41cec84cf285 ("r8152: don't enable napi before rx ready")
Link: https://lkml.kernel.org/r/20151205105912.GA1766@al
Signed-off-by: Peter Wu 
Acked-by: Hayes Wang 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: qmi_wwan: add XS Stick W100-2 from 4G Systems

2015-12-15T05:24:30+00:00

[ Upstream commit 68242a5a1e2edce39b069385cbafb82304eac0f1 ]

Thomas reports
"
4gsystems sells two total different LTE-surfsticks under the same name.
..
The newer version of XS Stick W100 is from "omega"
..
Under windows the driver switches to the same ID, and uses MI03\6 for
network and MI01\6 for modem.
..
echo "1c9e 9b01" > /sys/bus/usb/drivers/qmi_wwan/new_id
echo "1c9e 9b01" > /sys/bus/usb-serial/drivers/option1/new_id

T:  Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#=  4 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1c9e ProdID=9b01 Rev=02.32
S:  Manufacturer=USB Modem
S:  Product=USB Modem
S:  SerialNumber=
C:  #Ifs= 5 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I:  If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage

Now all important things are there:

wwp0s29f7u2i3 (net), ttyUSB2 (at), cdc-wdm0 (qmi), ttyUSB1 (at)

There is also ttyUSB0, but it is not usable, at least not for at.

The device works well with qmi and ModemManager-NetworkManager.
"

Reported-by: Thomas Schäfer 
Signed-off-by: Bjørn Mork 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

qmi_wwan: add Sierra Wireless MC74xx/EM74xx

2015-12-09T19:03:10+00:00

[ Upstream commit 0db65fcfcded76fe4f74e3ca9f4e2baf67b683ef ]

New device IDs shamelessly lifted from the vendor driver.

Signed-off-by: Bjørn Mork 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman