linux-stable.git/drivers/net/usb, branch v3.2

asix: new device id

2011-12-19T21:37:56+00:00

Adds the device id needed for the USB Ethernet Adapter delivered by
ASUS with their Zenbook.

Signed-off-by: Aurelien Jacobs 
Acked-by: Grant Grundler 
Signed-off-by: David S. Miller

net-next:asix: V2 Update VERSION

2011-11-15T21:26:07+00:00

Only update VERSION to reflect previous changes.

Signed-off-by: Grant Grundler 
Signed-off-by: David S. Miller

net-next:asix: V2 more fixes for ax88178 phy init sequence

2011-11-15T21:26:06+00:00

Now works on Samsung Series 5 (chromebook)

Two fixes here:
o use 0x7F mask for phymode
o read phyid *AFTER* phy is powered up (via GPIOs)

Signed-off-by: Allan Chou 
Signed-off-by: Grant Grundler 
Signed-off-by: David S. Miller

net-next:asix: reduce AX88772 init time by about 2 seconds

2011-11-15T21:26:06+00:00

ax88772_reset takes about 2 seconds and is called twice.
Once from ax88772_bind() directly and again indirectly from usbnet_open().
Reset the USB FW/Phy enough to blink the LEDs when inserted.

Signed-off-by: Allan Chou 
Signed-off-by: Grant Grundler 
Signed-off-by: David S. Miller

net-next:asix:poll in asix_get_phyid in case phy not ready

2011-11-15T21:26:06+00:00

Sometimes the phy isn't ready after reset...poll and pray it will be soon.

Signed-off-by: Freddy Xin 
Signed-off-by: Grant Grundler 
Signed-off-by: David S. Miller

net-next:asix:PHY_MODE_RTL8211CL should be 0xC

2011-11-15T21:26:05+00:00

Use correct value for rtl phy support.
(rtl phy are in AX88178 devices like NWU220G and USB2-ET1000).

Signed-off-by: Allan Chou 
Tested-by: Grant Grundler 
Signed-off-by: David S. Miller

net/usb: Misc. fixes for the LG-VL600 LTE USB modem

2011-11-14T05:49:05+00:00

Add checking for valid magic values (needed for stability in the event
corrupted packets are received) and remove some other unneeded checks.
Also, fix flagging device as WWAN (Bugzilla bug #39952).

Signed-off-by: Mark Kamichoff 
Signed-off-by: David S. Miller

Fix incorrect usage of NET_IP_ALIGN

2011-11-08T17:37:07+00:00

The driver used NET_IP_ALIGN to remove some additional padding inside of
the rx_fixup function. On many architectures NET_IP_ALIGN defaults to 2
which removed the correct amount of bytes.

On MCORE2-machines commit ea812ca1b06113597adcd8e70c0f84a413d97544
introduces a change which sets NET_IP_ALIGN to 0 by default. Which
triggered the bug on these machines.

This fix introduces a new RXW_PADDING define and uses this instead of
NET_IP_ALIGN. The name was taken from the original SMSC7500 driver which
is provided by SMSC.

Signed-off-by: Nico Erfurth 
Tested-by: Phil Sutter 
Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2011-11-07T18:55:33+00:00

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (47 commits)
  forcedeth: fix a few sparse warnings (variable shadowing)
  forcedeth: Improve stats counters
  forcedeth: remove unneeded stats updates
  forcedeth: Acknowledge only interrupts that are being processed
  forcedeth: fix race when unloading module
  MAINTAINERS/rds: update maintainer
  wanrouter: Remove kernel_lock annotations
  usbnet: fix oops in usbnet_start_xmit
  ixgbe: Fix compile for kernel without CONFIG_PCI_IOV defined
  etherh: Add MAINTAINERS entry for etherh
  bonding: comparing a u8 with -1 is always false
  sky2: fix regression on Yukon Optima
  netlink: clarify attribute length check documentation
  netlink: validate NLA_MSECS length
  i825xx:xscale:8390:freescale: Fix Kconfig dependancies
  macvlan: receive multicast with local address
  tg3: Update version to 3.121
  tg3: Eliminate timer race with reset_task
  tg3: Schedule at most one tg3_reset_task run
  tg3: Obtain PCI function number from device
  ...

usbnet: fix oops in usbnet_start_xmit

2011-11-07T18:25:41+00:00

This patch fixes the bug added in commit v3.1-rc7-1055-gf9b491e
SKB can be NULL at this point, at least for cdc-ncm.

Signed-off-by: Konstantin Khlebnikov 
Acked-by: Richard Cochran 
Signed-off-by: David S. Miller