linux-stable.git/drivers/net/usb, branch linux-2.6.33.y

ASIX: Add AX88772B USB ID

2011-11-07T21:46:57+00:00

commit 308859097831831a979f2e82cbeef0a94f438080 upstream.

This device can be found in Acer Iconia TAB W500 tablet dock.

Signed-off-by: Marek Vasut 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

NET: cdc-phonet, handle empty phonet header

2011-04-22T15:49:57+00:00

commit 468c3f924f043cad7a04f4f4d5224a2c9bc886c1 upstream.

Currently, for N 5800 XM I get:
cdc_phonet: probe of 1-6:1.10 failed with error -22

It's because phonet_header is empty. Extra altsetting looks like
there:
E 05 24 00 01 10 03 24 ab 05 24 06 0a 0b 04 24 fd  .$....$..$....$.
E 00                                               .

I don't see the header used anywhere so just check if the phonet
descriptor is there, not the structure itself.

Signed-off-by: Jiri Slaby 
Cc: Rémi Denis-Courmont 
Cc: David S. Miller 
Acked-by: Rémi Denis-Courmont 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

pegasus: fix USB device ID for ETX-US2

2010-08-02T17:26:25+00:00

[ Upstream commit 95718c1c25370b2c85061a4d8dfab2831b3ad280 ]

USB device ID definition for I-O Data ETX-US2 is wrong.
Correct ID is 0x093a. Here's snippet from /proc/bus/usb/devices;

T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  2 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=04bb ProdID=093a Rev= 1.01
S:  Manufacturer=I-O DATA DEVICE,INC.
S:  Product=I-O DATA ETX2-US2
S:  SerialNumber=A26427
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=224mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=00 Driver=pegasus
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=03(Int.) MxPS=   8 Ivl=125us

This patch enables pegasus driver to work fine with ETX-US2.

Signed-off-by: Tadashi Abe 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

cdc_ether: fix autosuspend for mbm devices

2010-05-12T22:02:56+00:00

[ Upstream commit 55964d72d63b15df49a5df11ef91dc8601270815 ]

Autosuspend works until you bring the wwan interface up, then the
device does not enter autosuspend anymore.

The following patch fixes the problem by setting the .manage_power
field in the mbm_info struct to the same as in the cdc_info struct
(cdc_manager_power).

Signed-off-by: Torgny Johansson 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

dm9601: fix phy/eeprom write routine

2010-05-12T22:02:43+00:00

commit e9162ab1610531d6ea6c1833daeb2613e44275e8 upstream.

Use correct bit positions in DM_SHARED_CTRL register for writes.

Michael Planes recently encountered a 'KY-RS9600 USB-LAN converter', which
came with a driver CD containing a Linux driver. This driver turns out to
be a copy of dm9601.c with symbols renamed and my copyright stripped.
That aside, it did contain 1 functional change in dm_write_shared_word(),
and after checking the datasheet the original value was indeed wrong
(read versus write bits).

On Michaels HW, this change bumps receive speed from ~30KB/s to ~900KB/s.
On other devices the difference is less spectacular, but still significant
(~30%).

Reported-by: Michael Planes 
Signed-off-by: Peter Korsgaard 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

cdc_ether: new PID for Ericsson C3607w to the whitelist (resubmit)

2010-02-23T09:25:01+00:00

This patch adds a new vid/pid to the cdc_ether whitelist.

Device added:
- Ericsson Mobile Broadband variant C3607w

Signed-off-by: Torgny Johansson 

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Signed-off-by: David S. Miller

cdc_ether: Partially revert "usbnet: Set link down initially ..."

2010-01-29T05:37:18+00:00

Commit 37e8273cd30592d3a82bcb70cbb1bdc4eaeb6b71 ("usbnet: Set link down
initially for drivers that update link state") changed the initial link
state in cdc_ether and other drivers based on the understanding that the
devices they support generate link change interrupts.  However, this is
optional in the CDC Ethernet protocol, and two users have reported in
 that the link state
for their devices remains down.  Therefore, revert the change in
cdc_ether.

Signed-off-by: Ben Hutchings 
Tested-by: Avi Rozen 
Signed-off-by: David S. Miller

hso: fixed missing newlines

2010-01-07T08:43:47+00:00

Fixed missing newlines in calls to dev_warn & dev_err.

Signed-off-by: Jan Dumon 
Signed-off-by: David S. Miller

hso: Fix for 5 sec timeouts with v2.x firmware

2010-01-07T08:43:46+00:00

Don't send flow control settings to any port other than the modem port.
Older firmware ignored this request but did sent a reply. Newer firmware just
ignores it without reply and causes a 5 second timeout every time a port
(except for the modem port) is opened or if tiocm settings are changed.

Signed-off-by: Jan Dumon 
Signed-off-by: David S. Miller

hso: Attempt to recover from usb bus errors

2010-01-07T08:43:45+00:00

Attempt to reset the usb device when we receive usb bus errors.

Signed-off-by: Jan Dumon 
Signed-off-by: David S. Miller