linux-stable.git/drivers/net/team, branch v4.14.331

team: fix null-ptr-deref when team device type is changed

2023-10-10T19:43:38+00:00

[ Upstream commit 492032760127251e5540a5716a70996bacf2a3fd ]

Get a null-ptr-deref bug as follows with reproducer [1].

BUG: kernel NULL pointer dereference, address: 0000000000000228
...
RIP: 0010:vlan_dev_hard_header+0x35/0x140 [8021q]
...
Call Trace:
 
 ? __die+0x24/0x70
 ? page_fault_oops+0x82/0x150
 ? exc_page_fault+0x69/0x150
 ? asm_exc_page_fault+0x26/0x30
 ? vlan_dev_hard_header+0x35/0x140 [8021q]
 ? vlan_dev_hard_header+0x8e/0x140 [8021q]
 neigh_connected_output+0xb2/0x100
 ip6_finish_output2+0x1cb/0x520
 ? nf_hook_slow+0x43/0xc0
 ? ip6_mtu+0x46/0x80
 ip6_finish_output+0x2a/0xb0
 mld_sendpack+0x18f/0x250
 mld_ifc_work+0x39/0x160
 process_one_work+0x1e6/0x3f0
 worker_thread+0x4d/0x2f0
 ? __pfx_worker_thread+0x10/0x10
 kthread+0xe5/0x120
 ? __pfx_kthread+0x10/0x10
 ret_from_fork+0x34/0x50
 ? __pfx_kthread+0x10/0x10
 ret_from_fork_asm+0x1b/0x30

[1]
$ teamd -t team0 -d -c '{"runner": {"name": "loadbalance"}}'
$ ip link add name t-dummy type dummy
$ ip link add link t-dummy name t-dummy.100 type vlan id 100
$ ip link add name t-nlmon type nlmon
$ ip link set t-nlmon master team0
$ ip link set t-nlmon nomaster
$ ip link set t-dummy up
$ ip link set team0 up
$ ip link set t-dummy.100 down
$ ip link set t-dummy.100 master team0

When enslave a vlan device to team device and team device type is changed
from non-ether to ether, header_ops of team device is changed to
vlan_header_ops. That is incorrect and will trigger null-ptr-deref
for vlan->real_dev in vlan_dev_hard_header() because team device is not
a vlan device.

Cache eth_header_ops in team_setup(), then assign cached header_ops to
header_ops of team net device when its type is changed from non-ether
to ether to fix the bug.

Fixes: 1d76efe1577b ("team: add support for non-ethernet devices")
Suggested-by: Hangbin Liu 
Reviewed-by: Hangbin Liu 
Signed-off-by: Ziyang Xuan 
Reviewed-by: Jiri Pirko 
Reviewed-by: Eric Dumazet 
Link: https://lore.kernel.org/r/20230918123011.1884401-1-william.xuanziyang@huawei.com
Signed-off-by: Paolo Abeni 
Signed-off-by: Sasha Levin

team: Fix incorrect deletion of ETH_P_8021AD protocol vid from slaves

2023-08-30T14:35:12+00:00

[ Upstream commit dafcbce07136d799edc4c67f04f9fd69ff1eac1f ]

Similar to commit 01f4fd270870 ("bonding: Fix incorrect deletion of
ETH_P_8021AD protocol vid from slaves"), we can trigger BUG_ON(!vlan_info)
in unregister_vlan_dev() with the following testcase:

  # ip netns add ns1
  # ip netns exec ns1 ip link add team1 type team
  # ip netns exec ns1 ip link add team_slave type veth peer veth2
  # ip netns exec ns1 ip link set team_slave master team1
  # ip netns exec ns1 ip link add link team_slave name team_slave.10 type vlan id 10 protocol 802.1ad
  # ip netns exec ns1 ip link add link team1 name team1.10 type vlan id 10 protocol 802.1ad
  # ip netns exec ns1 ip link set team_slave nomaster
  # ip netns del ns1

Add S-VLAN tag related features support to team driver. So the team driver
will always propagate the VLAN info to its slaves.

Fixes: 8ad227ff89a7 ("net: vlan: add 802.1ad support")
Suggested-by: Ido Schimmel 
Signed-off-by: Ziyang Xuan 
Reviewed-by: Simon Horman 
Link: https://lore.kernel.org/r/20230814032301.2804971-1-william.xuanziyang@huawei.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

team: reset team's flags when down link is P2P device

2023-08-11T09:33:51+00:00

[ Upstream commit fa532bee17d15acf8bba4bc8e2062b7a093ba801 ]

When adding a point to point downlink to team device, we neglected to reset
the team's flags, which were still using flags like BROADCAST and
MULTICAST. Consequently, this would initiate ARP/DAD for P2P downlink
interfaces, such as when adding a GRE device to team device. Fix this by
remove multicast/broadcast flags and add p2p and noarp flags.

After removing the none ethernet interface and adding an ethernet interface
to team, we need to reset team interface flags. Unlike bonding interface,
team do not need restore IFF_MASTER, IFF_SLAVE flags.

Reported-by: Liang Li 
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2221438
Fixes: 1d76efe1577b ("team: add support for non-ethernet devices")
Signed-off-by: Hangbin Liu 
Signed-off-by: Paolo Abeni 
Signed-off-by: Sasha Levin

net: team: Unsync device addresses on ndo_stop

2022-09-28T08:56:51+00:00

[ Upstream commit bd60234222b2fd5573526da7bcd422801f271f5f ]

Netdev drivers are expected to call dev_{uc,mc}_sync() in their
ndo_set_rx_mode method and dev_{uc,mc}_unsync() in their ndo_stop method.
This is mentioned in the kerneldoc for those dev_* functions.

The team driver calls dev_{uc,mc}_unsync() during ndo_uninit instead of
ndo_stop. This is ineffective because address lists (dev->{uc,mc}) have
already been emptied in unregister_netdevice_many() before ndo_uninit is
called. This mistake can result in addresses being leftover on former team
ports after a team device has been deleted; see test_LAG_cleanup() in the
last patch in this series.

Add unsync calls at their expected location, team_close().

v3:
* When adding or deleting a port, only sync/unsync addresses if the team
  device is up. In other cases, it is taken care of at the right time by
  ndo_open/ndo_set_rx_mode/ndo_stop.

Fixes: 3d249d4ca7d0 ("net: introduce ethernet teaming device")
Signed-off-by: Benjamin Poirier 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

team: protect features update by RCU to avoid deadlock

2021-02-03T22:22:23+00:00

commit f0947d0d21b219e03940b9be6628a43445c0de7a upstream.

Function __team_compute_features() is protected by team->lock
mutex when it is called from team_compute_features() used when
features of an underlying device is changed. This causes
a deadlock when NETDEV_FEAT_CHANGE notifier for underlying device
is fired due to change propagated from team driver (e.g. MTU
change). It's because callbacks like team_change_mtu() or
team_vlan_rx_{add,del}_vid() protect their port list traversal
by team->lock mutex.

Example (r8169 case where this driver disables TSO for certain MTU
values):
...
[ 6391.348202]  __mutex_lock.isra.6+0x2d0/0x4a0
[ 6391.358602]  team_device_event+0x9d/0x160 [team]
[ 6391.363756]  notifier_call_chain+0x47/0x70
[ 6391.368329]  netdev_update_features+0x56/0x60
[ 6391.373207]  rtl8169_change_mtu+0x14/0x50 [r8169]
[ 6391.378457]  dev_set_mtu_ext+0xe1/0x1d0
[ 6391.387022]  dev_set_mtu+0x52/0x90
[ 6391.390820]  team_change_mtu+0x64/0xf0 [team]
[ 6391.395683]  dev_set_mtu_ext+0xe1/0x1d0
[ 6391.399963]  do_setlink+0x231/0xf50
...

In fact team_compute_features() called from team_device_event()
does not need to be protected by team->lock mutex and rcu_read_lock()
is sufficient there for port list traversal.

Fixes: 3d249d4ca7d0 ("net: introduce ethernet teaming device")
Cc: Saeed Mahameed 
Signed-off-by: Ivan Vecera 
Reviewed-by: Cong Wang 
Reviewed-by: Jiri Pirko 
Link: https://lore.kernel.org/r/20210125074416.4056484-1-ivecera@redhat.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

net: team: fix memory leak in __team_options_register

2020-10-14T07:51:12+00:00

commit 9a9e77495958c7382b2438bc19746dd3aaaabb8e upstream.

The variable "i" isn't initialized back correctly after the first loop
under the label inst_rollback gets executed.

The value of "i" is assigned to be option_count - 1, and the ensuing
loop (under alloc_rollback) begins by initializing i--.
Thus, the value of i when the loop begins execution will now become
i = option_count - 2.

Thus, when kfree(dst_opts[i]) is called in the second loop in this
order, (i.e., inst_rollback followed by alloc_rollback),
dst_optsp[option_count - 2] is the first element freed, and
dst_opts[option_count - 1] does not get freed, and thus, a memory
leak is caused.

This memory leak can be fixed, by assigning i = option_count (instead of
option_count - 1).

Fixes: 80f7c6683fe0 ("team: add support for per-port options")
Reported-by: syzbot+69b804437cfec30deac3@syzkaller.appspotmail.com
Tested-by: syzbot+69b804437cfec30deac3@syzkaller.appspotmail.com
Signed-off-by: Anant Thazhemadam 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

team: set dev->needed_headroom in team_setup_by_port()

2020-10-14T07:51:12+00:00

commit 89d01748b2354e210b5d4ea47bc25a42a1b42c82 upstream.

Some devices set needed_headroom. If we ignore it, we might
end up crashing in various skb_push() for example in ipgre_header()
since some layers assume enough headroom has been reserved.

Fixes: 1d76efe1577b ("team: add support for non-ethernet devices")
Signed-off-by: Eric Dumazet 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

team: fix hang in team_mode_get()

2020-05-02T15:24:17+00:00

[ Upstream commit 1c30fbc76b8f0c07c92a8ca4cd7c456612e17eb5 ]

When team mode is changed or set, the team_mode_get() is called to check
whether the mode module is inserted or not. If the mode module is not
inserted, it calls the request_module().
In the request_module(), it creates a child process, which is
the "modprobe" process and waits for the done of the child process.
At this point, the following locks were used.
down_read(&cb_lock()); by genl_rcv()
    genl_lock(); by genl_rcv_msc()
        rtnl_lock(); by team_nl_cmd_options_set()
            mutex_lock(&team->lock); by team_nl_team_get()

Concurrently, the team module could be removed by rmmod or "modprobe -r"
The __exit function of team module is team_module_exit(), which calls
team_nl_fini() and it tries to acquire following locks.
down_write(&cb_lock);
    genl_lock();
Because of the genl_lock() and cb_lock, this process can't be finished
earlier than request_module() routine.

The problem secenario.
CPU0                                     CPU1
team_mode_get
    request_module()
                                         modprobe -r team_mode_roundrobin
                                                     team <--(B)
        modprobe team <--(A)
            team_mode_roundrobin

By request_module(), the "modprobe team_mode_roundrobin" command
will be executed. At this point, the modprobe process will decide
that the team module should be inserted before team_mode_roundrobin.
Because the team module is being removed.

By the module infrastructure, the same module insert/remove operations
can't be executed concurrently.
So, (A) waits for (B) but (B) also waits for (A) because of locks.
So that the hang occurs at this point.

Test commands:
    while :
    do
        teamd -d &
	killall teamd &
	modprobe -rv team_mode_roundrobin &
    done

The approach of this patch is to hold the reference count of the team
module if the team module is compiled as a module. If the reference count
of the team module is not zero while request_module() is being called,
the team module will not be removed at that moment.
So that the above scenario could not occur.

Fixes: 3d249d4ca7d0 ("net: introduce ethernet teaming device")
Signed-off-by: Taehee Yoo 
Reviewed-by: Jiri Pirko 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

team: add missing attribute validation for array index

2020-03-20T09:54:11+00:00

[ Upstream commit 669fcd7795900cd1880237cbbb57a7db66cb9ac8 ]

Add missing attribute validation for TEAM_ATTR_OPTION_ARRAY_INDEX
to the netlink policy.

Fixes: b13033262d24 ("team: introduce array options")
Signed-off-by: Jakub Kicinski 
Reviewed-by: Jiri Pirko 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

team: add missing attribute validation for port ifindex

2020-03-20T09:54:11+00:00

[ Upstream commit dd25cb272ccce4db67dc8509278229099e4f5e99 ]

Add missing attribute validation for TEAM_ATTR_OPTION_PORT_IFINDEX
to the netlink policy.

Fixes: 80f7c6683fe0 ("team: add support for per-port options")
Signed-off-by: Jakub Kicinski 
Reviewed-by: Jiri Pirko 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman